The MASSIVE 12" cut swing-blade sawmill!

Watch the all-new Warrior 12" swing blade sawmill thump through some deep cuts in poplar.

[@wendellbell6164]

Thank you for the video. I would love to see start to finish. Setup included.

[@darroneasoneason725]

It would be nice to see you from arrival thru set up and pack up

[@coburnlowman]

The setup was gonna be my comment. It looks like a great saw , but if it takes hrs to set it up especially out on a hot day that would be bad. I know they aren't as mobile but the swing blades that are set up on a log bunk like a band mill just seems more user friendly or at least a lot more simple.

[@amirkamola600]

Good saw mill but how do you cut a big log on slope of about 35 degree with the turbor saw mill?

[@johnsmith-iu1dv]

How does this mill physically (lifetime wear) compare to the Lucas mill?

[@navwinwells376]

I have a 10inch blade on my sawmill auto worrior can it replace with a 12inch blade

[@donnylanting2462]

I cant stop imagine if i have one ..how much

[@scarmenl]

If I understand rightly, you could then with a double cut get a beam 24 inches by what ever the tree can provide? If I am correct this machine would make one great beam and post producing machine!

[@TURBOSAWMILL]

scarmenl yes that’s correct

[@SuperLooneyrooney]

i had an image of my MIL there for a minute...........

[@larrycounce4509]

WOW

[@danbooger1]

ok I see all the different blade mills but one thing they don't tell you is how you level off the log . I see the bunkers on the ground but how does the saw make level cuts if its high on one end an lower on other what if ground isn't level . please explain

[@TURBOSAWMILL]

Dan butcher as every cut is equal to the previous. There is no need to have it level. It only needs to be aligned to the centre of the log before you start as a once of alignment. We don’t turn the log so your requirement isn’t necessary.

[@danbooger1]

ok but if the log is high on one end then the other end when the saw blade goes through the wouldn't be lets say 2x6 on one end an 2 x4 on other end if log was 2" lower or does the blade float

[@TURBOSAWMILL]

Dan butcher not really understanding you. Blade certainly doesn’t float. The other end of the beam has a one off adjustment to align the saw to the log before milling begins. Everything is then sawn parallel until the end.

[@TheCrazycatfisher]

So basically you level the beam to the log not the other way around?

[@travishanson166]

The board is parrellel or straight to the saw blade, not the log. So the boards will be straight and uniform so long as the log doesn't move.

[@pedoberyyy6226]

can I get a link to this equipment because I can not find it on the site?

[@TURBOSAWMILL]

PeDoberYyy just click on the automated link on our website.

[@opheliaeghan2204]

@@TURBOSAWMILL the price

[@evitalayme4064]

Cuanto cuesta esa maquina Precio por fabor

[@Johnrider1234]

How much. Can you get in Canada 🇨🇦

[@adeiltondeca8680]

Não tem como eu saber o PREÇO é como posso compra

[@jimwilson4825]

Cutting reverse order, cut horizontal then vertical

[@moisesluiz5243]

Boa noite como a diquiri esa maquina

[@1982MCI]

Where can I buy one of these saws and what is the approximate price of one like this?

[@smwrbd]

The only not answered question.

[@jarrodoreilly4328]

This model starts at Australian $27000 and goes to $62000

[@phildeborahpound5440]

What is the price of this mill

[@H4rleyBoy]

After the first cut it was a bit samey, good bit of kit though.

[@sapii9599]

Nyan bereih

[@user-ow5zk8lf1k]

Как работает автоматическое перемещение пилы?!

[@dennisbinyon9023]

black poplar?

[@TURBOSAWMILL]

Yep

[@user-rf3hw9ru7s]

TURBOSAWMILL цена

[@adairbiasi962]

quanto custa essa máquina e qual a largura máxima ela serra

[@dale2778]

why dont they cut the bottom at twice the depth? would be able to drop the board better would it not?

[@TURBOSAWMILL]

dale you can do all sorts with the swingblade but no real advantage going deeper in the horizontal cut.

[@shajuindianprisewhatplease487]

@@TURBOSAWMILL what indian prise

[@shadustdadu2347]

Je voudrais avoir des infos pour l'achat

[@arifbacchus7960]

Price please

[@TURBOSAWMILL]

Found at www.turbosawmill.com

[@thomasbrenes6619]

Boys and girls can anyone tell me how he can cut 24" slabs no problem ?

[@TURBOSAWMILL]

Thomas Brenes The guard swings up or is removed to enable a horizontal cut on the left of the log (right side of blade) and a horizontal cut or back cut on right of the log (left side of the blade). This is done in the horizontal orientation.