The method of repairing broken axles by widening them is stronger than before

The method of repairing broken axles by widening them is stronger than before
#method #repairing #broken #axles #stronger #before

[@user-fs2wo6up9p]

Смотря ваши ролики,я подумал что у вас вообще нет дождей. А вот он! 😁

[@fidelnavarro5064]

Waoo !! Excelente Hermano. Gracias

[@georgegonzalez2476]

Thing you learn first hour of welding class: welded areas are weaker and more brittle than original. This axle has already been welded and has failed again. It takes a whole lot of confidence to think this weld is going to work better than the previous one.

[@petertyrrell6690]

I would think that the weak "links" would be the heat affected zones after welding. As you're going to weld on your lathe anyway, wouldn't it be just as strong if you bored the hole as you did, tacked the shaft to inside of the hub, and then filled the hole with weld? Thanks for sharing.

[@michaelopere5424]

Good job,the job looks very neat.

[@hamadmengal6716]

Laa jawab

[@donraptor6156]

Let me know how long it doesn't last!

[@dont-want-no-wrench]

looks fine to me

[@rolandolaureano2461]

Excelente trabajo 👏

[@trailblazer1047]

Good Job

[@paulorth2251]

Hope it holds up as well as expected.

[@sptomcat866]

給點讚，但是:我懷疑這個動力軸心能撐幾頓貨???

[@GustavoSanchez-eh8lc]

Regular nunca se debe soldar un eje en la parte interior la soldarura le afecta y y parte

[@cherpiu5842]

Buenísimo 😅

[@dont-want-no-wrench]

shorter by a bit than original, innit?

[@davidhamm5626]

But, you don't need a lot is most spider gears...

[@utkuozcan4396]

Axle short 2 cm more, its ok ?

[@greenhat7742]

Гудронум!!!

[@sheriffdeen175]

Good job

[@user-pg4pu8cw9k]

Полная охинея! Лопнет на первом километре полной загрузки машины!

[@user-br3zd5ur5q]

Несогласен, при полной загрузке, учитывая как они грузят он вряд ли тронется.

[@polishedturdspeedshop]

When these guys frame a house I bet they still find a way to get a lathe involved

[@dont-want-no-wrench]

most important machine tool

[@bretlovitz3068]

There is a reason this was made as one solid forged piece. This shit job won't last on their grossly overloaded truck. I love reading the comments and seeing all the people who praise them for this crap. They, like the people doing the work, have no understanding of the forces on the axle.

[@PeterChapman-rg6gr]

Most of the 1/2 shafts on our vehicles were made in 2 parts and friction welded together followed by stress relief and then heat treating. We had lots of failures on both the weld and the shaft shattering.

[@rasolfahry]

فنان شغله روعة

[@user-sj3gh6tf2x]

Полуось порвало не от крутящего момента,а от люфта на подшипниках....

[@user-br3zd5ur5q]

Может и подшипники а может мост гнутый , это не важно полуось уже не спасти.