The most absurd tank engines ever built - 2-8-8-8-2 "Triplexes"

  Рет қаралды 177,165

Train of Thought

Train of Thought

Күн бұрын

Пікірлер: 545
@CarlosDeLosMuertes
@CarlosDeLosMuertes 2 жыл бұрын
A bit thing you are missing here is while they ended up being pusher (banking) engines, that's not what they were intended for. (I manly learned about the Virginian 700, but I believe the Erie 3 where of the same reasoning) These were designed for Coal Drags, which don't need much in terms of speed, but did tend to need more than single digit top speeds. The want was for one big engine (and thus one crew) for these and to pull ever larger drags. But when they couldn't provide enough steam for the journey they were dropped down to pusher service. However in the US pusher service wasn't really anything special, a standard engine or two was typically enough for this and the benefits of a special engine for this was greatly outweighed by the costs.
@blanetrain9584
@blanetrain9584 2 жыл бұрын
The VGN seemed to like using single engines on their coal drags from Roanoke to Norfolk as it was generally down hill for loads and hence why they used 2-10-10-2s for a time after the Triplex (eventually they were supplanted by the AG class 2-6-6-6 when a former C&O employee became their mechanical officer in the 40s)
@Dallen9
@Dallen9 2 жыл бұрын
And another note The Virginian 700 was a 2-8-8-8-4 and all for Triplexs on both Railroads were remade to make several different 8 driving wheel locomotives. the Scrap logs were mainly for the Boilers and I think the Virginian scraped 700's tender also I for get the road numbers but the 700 was remade into three 2-8-0 loco motives.
@NW2174Fan
@NW2174Fan 2 жыл бұрын
@@Dallen9 VGN 700 was actually split into a 2-8-8-0 and a 2-8-2 (they were AF Class 610 and MD Class 410 respectfully, a lot of websites would confirm it)
@raymondleggs5508
@raymondleggs5508 2 жыл бұрын
I think with better trained crews and a bigger firebox and a condensing tender like the south African Class 25 4-8-4s and the German BR52 2-10-0's instead of simply injecting the steam back into the last set of drivers this locomotive would have worked.
@theimaginationstation1899
@theimaginationstation1899 Жыл бұрын
Both the Erie and the Virginian were entirely intended as pushers. The Erie locomotives spent their entire careers on their one 7.75 mile grade. The Virginian never entered service.
@WatchVidsMakeLists
@WatchVidsMakeLists 2 жыл бұрын
Imagine being stuck at a railroad crossing and having to wait for a 6.7-mile-long train that's only going 4 mph...
@andyharman3022
@andyharman3022 2 жыл бұрын
Get out your picnic basket, because you're going to be there for more than an hour and a half.
@damianboyd1636
@damianboyd1636 2 жыл бұрын
Actually 10 hrs probably
@Bassotronics
@Bassotronics 2 жыл бұрын
lol! Might as well just pretend it's the Berlin Wall at that point.
@Lostmymind1
@Lostmymind1 2 жыл бұрын
@@Bassotronics You mean tear it down, and have a protest party where you denounce communism?
@hicknopunk
@hicknopunk 2 жыл бұрын
We have a lumber line at that speed here, but it only has 80 or 100 cars.
@ThomasFarquhar2
@ThomasFarquhar2 2 жыл бұрын
I saw the thumbnail and thought "tank engine? That has a tender!" But nope it's just massive
@craigdallingproductions4430
@craigdallingproductions4430 2 жыл бұрын
Yep it’s Just a huge bunker all a long
@hazarddragoonfang3482
@hazarddragoonfang3482 2 жыл бұрын
me too
@JohnGeorgeBauerBuis
@JohnGeorgeBauerBuis 2 жыл бұрын
Apart from the extra set of cylinders and the corresponding wheels, they were conceptually very similar to the first Mallet types.
@brokkrep
@brokkrep 2 жыл бұрын
Isn't it called tank because of the boiler?
@red5t653
@red5t653 2 жыл бұрын
@@brokkrep No, they're called tank engines because the water TANK is incorporated directly into the body of the engine, rather than being in a separate tender
@slimetank394
@slimetank394 2 жыл бұрын
Everyone knows and love the fictional mad scientist trope, but we've been glossing over how terrifying mad engineers are
@Penn_Senseless
@Penn_Senseless 2 жыл бұрын
It’s particularly scary when they work together
@renakunisaki
@renakunisaki 2 жыл бұрын
I'm not a mad scientist, I'm a disappointed scientist.
@jamesharding3459
@jamesharding3459 2 жыл бұрын
What do you call a mad engineer? An engineer.
@TheOneGuy1111
@TheOneGuy1111 2 жыл бұрын
To be fair, a lot of existing fictional "mad scientists" could potentially be better classified as mad engineers already.
@cr10001
@cr10001 2 жыл бұрын
0:17 "Each bogie was powered with three cylinders giving the Big Boys a significant amount of power" - No, and no! The Big Boys had one fixed engine unit (set of driving wheels) at the rear, and one swivelling engine unit at the front, which you could call a 'bogie' at a stretch. That was the '-8-8-' bit. The actual bogies (aka trucks) would have been the carrying wheels at each end, hence 4-8-8-4. And the engine units were twin cylinders, hence 4 in total. 0:40 "These boasted three cylinders per bogie" - again, no. So far as I'm aware, the Triplexes only had two cylinders per engine unit, also. This is why the UP 9000 4-12-2's - which did indeed have three cylinders - were such a notable exception in large US steam locomotive practice.
@theinspector1023
@theinspector1023 2 жыл бұрын
Hear hear.
@TeardropLabs
@TeardropLabs 2 жыл бұрын
Hope this gets pinned.
@ComerProductions193
@ComerProductions193 2 жыл бұрын
Yes it’s the truth please get this pinned
@asteamsavant9994
@asteamsavant9994 2 жыл бұрын
There are only 4 remaining American built locos with 3 cylinders: UP 9000, Southern Pacific 5021, Alton & Southern 12, and Baldwin 60000. Of those only the first 3 had conjugated valve gear installed. There were never any articulated American locos with more than 2 cylinders in each engine.
@flareblitz2528
@flareblitz2528 2 жыл бұрын
@@asteamsavant9994 Probably because it wouldn't mechanically work in theory
@thekric6935
@thekric6935 2 жыл бұрын
I just love how ridiculous trains could get back in the day
@greycatturtle7132
@greycatturtle7132 2 жыл бұрын
Yea XD
@EdwardChan.999
@EdwardChan.999 2 жыл бұрын
Well, trains nowadays don't even run on rails! It's equally ridiculous for people from the past, just in a different way.
@greycatturtle7132
@greycatturtle7132 2 жыл бұрын
@@EdwardChan.999 true
@Camphreneas
@Camphreneas 2 жыл бұрын
As a former train freak, it feels like I’m listening to a documentary of a sh*tpost about freakishly long train locomotives XD
@SiqueScarface
@SiqueScarface 2 жыл бұрын
Think of the Swedish Dm3 (actually Dm+Dm3+Dm), which were running until 2013 to see how ridiculous trains could be quite recently!
@lazyrrr2411
@lazyrrr2411 2 жыл бұрын
Oh , for those good old days when they just went ahead and Built one to see if it would work or not .
@CardScientist
@CardScientist 2 жыл бұрын
One other issue the Triplex had was that, as it used its coal and water, the driving wheels under the "bunker" would lose traction and slip often because the weight of the coal and water pushing down on those particular driving wheels would drastically reduced the long the locomotive ran
@SirLANsalot
@SirLANsalot 2 жыл бұрын
this was the main issue if why the Tri-Plex locomotives never caught on, besides the poor steaming and heating issues, they were never very fast nor could go very far. This is why the Big Boy was so successful, was being a normal simple articulated, and his massive size, was why it could pull so much. It was just a natural progression from the Challenger locomotives that UP went back to ALCO and asked if they could make it bigger. During the build of the locomotive an unknown builder scribbled Big Boy on the boiler, owing to the fact it was one effing huge locomotive. As we all know, the name stuck and the rest is history.
@CardScientist
@CardScientist 2 жыл бұрын
@@SirLANsalot Related to the Big Boy, a good documentary about them and their history of how they came to be and ran is called "Last of the Giants" and was produced by the Union Pacific. Worth a watch
@SirLANsalot
@SirLANsalot 2 жыл бұрын
@@CardScientist def a good vid for sure.
@davewalkerjr.6001
@davewalkerjr.6001 2 жыл бұрын
Garretts had the same Problem, Fuel over one set of Driver, Water over the Other, Boiler slung in between.
@martinanschutz7410
@martinanschutz7410 Жыл бұрын
I know the problem of you all, read only the normal books. First, the Tender had a higher axleload than the loco and a diffrent valve seting for less tractive effort. This could prevent more wheel slipping than the loco.
@WEM2016
@WEM2016 2 жыл бұрын
The Big Boy only had four cylinders-two on each engine set. Also, only the front set articulated; the rear set was rigid with the boiler and cab. Though, the Union Pacific did build a series of 4-12-2 locomotives that had three cylinders. One of them, #9000, survives today.
@mikestudioz216
@mikestudioz216 2 жыл бұрын
4-12-2s are called “Union Pacific” Types
@RacoonySkaloonyOfficial
@RacoonySkaloonyOfficial 2 жыл бұрын
"only had 4 cylinders" Most steam locomotives have inner pistons.
@Trublemaker_12
@Trublemaker_12 2 жыл бұрын
@@RacoonySkaloonyOfficial in Europe most did have inner pistons, in the United States they where used on only a small handful of types but the majority of engines here had only 2 cylinders per set of drivers.
@GudrezBilly
@GudrezBilly 2 жыл бұрын
@@RacoonySkaloonyOfficial Even worldwide, no. You could argue that there were more inside valve gear designs than outer, but there were definitely more outside piston locomotives.
@delurkor
@delurkor 2 жыл бұрын
Union Pacific had a small number of 4-10-2 three cylinder locomotives. They were near duplicates of the Southern Pacific's 4-10-2. In the 30s or 40s the center cylinder was deactivated. The 4-12-2s out lasted them into the early fifties. If you want to see many strange locomotives check out Loco-Locomotives in the Retro-Museum website.
@edwardvincentbriones5062
@edwardvincentbriones5062 2 жыл бұрын
There is a (claimed) story that when a Triplex pulls a heavy train, possibly heavy freight, the locomotive pulled so strong, the couplings of the cars and trucks of the time could not withstand the power and, possibly, broke under pressure. That’s why they were used afterwards to push not to pull. Interesting story.
@iainwalker8701
@iainwalker8701 2 жыл бұрын
I would have thought it is more likely a myth and only couplings that had manufacturing defects broke. No expert so feel free to tell me if you think I'm wrong.
@skylark6167
@skylark6167 2 жыл бұрын
I could swear I read that on an article about one of the early PRR electric locomotives, so it really wouldn't surprise me if that was true.
@erickstrainworld5488
@erickstrainworld5488 2 жыл бұрын
i believe that it was not the couplers themselves that broke but the frames of the cars they were mounted to due to wooden frames the stress of that many cars pulling on them split frames
@SportyMabamba
@SportyMabamba 2 жыл бұрын
Big Bertha (UK banking engine covered on this channel) occasionally snapped couplings or crushed freight wagons when being used so I believe other engines could do the same
@a_stone
@a_stone 2 жыл бұрын
This happened with the NZR G class (1928) which were a Garratt: 4-6-2+2-6-4 with 6 cylinders. They eventually just gave up and scrapped them but it's rather funny that NZ managed to build a locomotive too powerful for it's cars.
@Huttser17
@Huttser17 2 жыл бұрын
Another problem with the triplexes I'm surprised you didn't mention: As the fuel reserves were depleted the driving wheels under the "tender" became much more prone to slipping, so power would have to be reduced to all the drivers as the tender set did not have their own throttle valve.
@davidrayner9832
@davidrayner9832 2 жыл бұрын
And yet, Garratt locos were successful everywhere they were used.
@bearowen5480
@bearowen5480 2 жыл бұрын
Excellent point. Weight on drivers is a significant factor in overall tractive effort. The variability in weight of both water and fuel bearing down on the rear set of drivers was a major oversight by the designers. But one must admit, the Triplex was an extremely interesting concept, and made for one hell of an impressive sight with its 24 driving wheels under one boiler!
@WHJeffB
@WHJeffB 2 жыл бұрын
@@davidrayner9832 All of the weight of the boiler/cab assembly were applied to the driving bogies, which helped mitigate the loss of weight from water and fuel depletion. But I'm sure it definitely had an effect, though it wasn't like the only weight over a set of drive wheels was water and fuel weight, like the Triplex.
@Dat-Mudkip
@Dat-Mudkip 2 жыл бұрын
A couple of things that you missed: *Too Much Power* - The Erie was the first to have Triplexes built. Named "Matt H. Shay" in honor of a beloved employee of the railroad, it was originally intended to pull trains up the steep grades on its own. During testing, it was pulling a train of 250 cars up an incline. The journey went well, until they hit the 17 mile mark; here, a coupling snapped, and the train was ground to a halt. Investigation found that the engine was so powerful that the shock of just normal operations was enough to literally tear apart rolling stock. Undeterred, they decided to instead have it serve as a banker. *Virginian Woes* - While the success of the Erie's triplexes is generally considered uneconomical at the best of times, the Virginia Railroad's sole example was far less successful. The XA (numbered 700) was designed to drag up to 10 miles an hour, but it was found that anything beyond ~5 mph would empty the boiler of steam faster than it could be produced. Despite actual personnel from Baldwin stationed where the engine was kept to try and assist in hammering out the problems, it just simply didn't work. Worse still, the VRR found them even less reliable than the ones that the Erie were using. In fact, 700 in general was disliked by the crews. *Too Much Puff, Not Enough Steam* - _Matt H. Shay_ was given a 90 sq ft. grate area for the firebox; this proved insufficient, and so both the second and third received a 122 sq ft. grate area. Despite this large increase in size, it still wasn't enough to satisfy the demand the driving wheels provided.
@martinanschutz7410
@martinanschutz7410 Жыл бұрын
I believe that one of the first engines with Stoker and a Feed water pump could have Problems with this. The matt h. shay had a Piston pump and got a turbo pump later like the other triplex. There was a Erie engineer who said: " If the water pump get enough water in the Boiler ,we have enough Steam."
@Combes_
@Combes_ Жыл бұрын
​@@martinanschutz7410Good, I feel like the drafting issue could be improved by using a modern exaust layout (klychap, lempor, ETC) and a double/triple chimney setup
@martinanschutz7410
@martinanschutz7410 Жыл бұрын
@@Combes_ of course, yes . But i think all parts of the Steam curcuit need to bei improved. The triplexes are at the time of a N&W Y2. The improvements of a Y6b would make them great.
@Combes_
@Combes_ Жыл бұрын
@@martinanschutz7410 yeah and that
@jamesberry3230
@jamesberry3230 10 ай бұрын
the triplex's problem was the mechanical stoker, (all mechanical stokers had the same problem) they could not spread the coal evenly nor cover the grate fully, and thus limited steam production; the draft and grate size were sufficient, this was demonstrated when the mechanical stoker on one of the Erie triplexes broke down and they hand fired the boiler
@jordanwhitecar1982
@jordanwhitecar1982 Жыл бұрын
somewhere is the ghost of a locomotive designer thinking his 2-8-8-8-8-8-8-8-8-8-2 design would've worked
@themightyalpaca313
@themightyalpaca313 2 жыл бұрын
Somebody: *Builds an 0-8-8-8-0* Somebody else: *Consumes far too much alcohol, and proceeds to design a 2-10-10-10-10-10-2*
@nicholmansgarage3501
@nicholmansgarage3501 2 жыл бұрын
"Just don't expect to see anyone building one anytime soon" To be fair, nobody expected a new build PRR T1 either. Although, one of these would just be insanity.
@mattevans4377
@mattevans4377 2 жыл бұрын
The T1 isn't necessarily a bad design though, as long as you can combat the wheel slip. It's got the speed potential of a 4-4-2, with the power of a 4-8-4.
@nicholmansgarage3501
@nicholmansgarage3501 2 жыл бұрын
@@mattevans4377 oh, I didn't mean that. I quite like the T1s. I meant that a new build triplex would be insanity.
@mattevans4377
@mattevans4377 2 жыл бұрын
@@nicholmansgarage3501 I just thought you meant the T1 was insanity too. Easy mistake to make as some people do indeed think it's insane. But yeah, the Triplex is an entirely different breed. Would be fun though, and if I had my own locomotive works, I'd be building all sorts of wacky designs, just because.
@nicholmansgarage3501
@nicholmansgarage3501 2 жыл бұрын
@@mattevans4377 i would be too! The strange and unusual stuff is far and away the most fun, in my opinion. I'd love to see some of ths stuff that never got preserved (cough cough B&O EM1 cough). Although that engine isn't necessarily odd, just a sad story
@scottthewaterwarrior
@scottthewaterwarrior 2 жыл бұрын
@@mattevans4377 If I had my own locomotive works I'd want to try and build a hydrogen burning steam locomotive. But yeah if money isn't a factor it would be fun to build all sorts of dumb experimental stuff. One of my other favorites would be a rear engined front wheel drive car.
@andrewhall2554
@andrewhall2554 2 жыл бұрын
The Triplex locomotives were compound engines. High pressure steam entered the center set of cylinders and the exhaust from these cylinders was split between the front and rear cylinders. Exhaust from the front cylinders went up through the stack. The exhaust from the rear cylinders went though a feedwater heater and then to atmosphere via a large pipe at the back of the "tender".
@Vextrix739
@Vextrix739 2 жыл бұрын
I always say this when I see a triplex... "UNLIMITED TRACTIVE EFFORT"
@ingor.522
@ingor.522 2 жыл бұрын
I read from these Triplex Engines in a german book of railway engineering of the year of 1918, when a few german (prussian) railway engineers reported about of those locos. All three Triplexes had been owned by Baldwin but never had been bought from the ERIE RR where it had been tested and had showed that the too small firebox could not produce enough steam pressure to operate those engines effeciency enough. The exhaust of the front and rear Zylinders went into thr larger middle zylinders and used the steam expansion to drive all zylinders. The exhaust of the middle zylinders had been tiled also from one side to the front smokestack and from the otherside to the back smoke stack after heating the water inside the tender. One Engine had been sold to the Virginian Railways at Norfolk, Virginia where it had been built a little bit longer because of a much bigger firebox for burning virginian anthrazite coal, what brought more better results than burning the pennsylvania coal of what the ERIE RR wanted to haul to Buffalo or other Harbours at the great Lakes. At the ERIE RR those three Engines did shunting the coaltrains, theit max speed was around 25 mph as empty engine and more less than that with additional cars behind it. The Virginian #700 was much more efficient running by much higher speeds of up to 40 mph, the plan use it as pusher engine had been giving up very early, the loco could run ahead middle long standard trains but was too expensive in operation, so it was giving back to Baldwin in thr 1920's like I read from other railway engineering books of the 1920's. The problem were the tracks and the loco weight of metric tons per axle. The higher the loco weights the more bigger the tons per axle. Thr more expensive are the rails, what could carry those heavy engines.
@mgr_video_productions
@mgr_video_productions 2 жыл бұрын
Amazing video as always. I've never thought of these unusual locomotives as tank engines until this video. MTH made these in HO scale as well.
@SteamSuperHEater
@SteamSuperHEater 2 жыл бұрын
You've all heard of The Little Engine that Could, now get ready for: The Extremely Massive Engine that Couldn't
@sambrown6426
@sambrown6426 2 жыл бұрын
That's amazing, I love it.
@infaredxkingz8786
@infaredxkingz8786 2 ай бұрын
giant*
@d-fender4489
@d-fender4489 2 жыл бұрын
Despite its flaws, this locomotives is one of my favorite articulated locomotives.
@infaredxkingz8786
@infaredxkingz8786 2 ай бұрын
Oh, nice to see you here. I'm looking forward to boo boo choo choo scary movie
@bobsbasementhotrains3020
@bobsbasementhotrains3020 2 жыл бұрын
The Virginian Railroad had massive 2-10-10-2s that had the biggest diameter boiler used in the US. I have read that they could maintain there steam pressure will pushing heavy trains.
@NW2174Fan
@NW2174Fan 2 жыл бұрын
The first one built for the Virginian also suffered a boiler explosion in early 1941 (not sure if it was April of January because I didn't if the date was showing April 1st or January 4th because it could've been a British or American date), it's sad that we never got any preserved as the last AE (Virginian 2-10-10-2) to operate in revenue service was scrapped in 1949 (quite impressive for locomotives built in 1918 might I say)
@garryferrington811
@garryferrington811 2 жыл бұрын
They weren't pushers, they headed up heavy coal drags. For complete information on these engines, see "Guide to North American Steam Locomotives,"
@thelegendaryblackbeastofar39
@thelegendaryblackbeastofar39 2 жыл бұрын
The Big Boys did not use three cylinders per bogie, it used the conventional two! The three-cylinder arrangement uses the Gresley Conjugated Valvetrain where the timing for the center cylinder is derived from the valve positions of the outer-two. The design reduced wear on the tracks and provided a more uniform application of torque, hence reducing wheel-slip at slow speed. The major drawback was accessibility issues to the center cylinder for maintainance and the fact that its main-rod operated at a greater angle hence greater wear/stress to its bearings and sliding surfaces An interesting fact: When the Mallard set the record for the fastest steam engine ever it "threw out" its center rod and had to limp home.
@strobx1
@strobx1 2 жыл бұрын
The first set of cylinders(4 not 6) exhausted through the flues in the boiler. The rear drivers exhausted through it's own stack. Also Triplex referred to the fact that had 3 sets of drivers not 3 cylinders per driving wheels. 3 cylinder locos were tried here in the USA , but the hassle of serving the 3rd cylinder between the driving wheels was a head ache. Therefore most had the 3rd cylinder removed.
@danielboone3770
@danielboone3770 2 жыл бұрын
I love this history of the Triplex! Thank you for uploading this.
@pacificostudios
@pacificostudios 2 жыл бұрын
At the time of the Triplexes, the standard freight car was only 36 feet long, not 50 feet. It was also lighter than a modern freight car, and had a composite wood and steel frames.
@Lucius_Chiaraviglio
@Lucius_Chiaraviglio 2 жыл бұрын
Given that the Virginian's XA was successfully converted into 2 long-lived conventional locomotives, I wonder if the designers had made provision for such a conversion from the ground up, in case the triplex form didn't work out (which they might well have suspected, but had to deliver it anyway for the pointy-haired boss).
@prestonsvideos6133
@prestonsvideos6133 2 жыл бұрын
I’m glad we learned from our mistakes, but damn, it would of been interesting to see how a Quadruplex or a Quintuplex would turn out in real life.
@sambrown6426
@sambrown6426 2 жыл бұрын
I believe some country did actually build a quadruplex, History in the Dark included it in one of his videos, though I don't remember which.
@ShinyaMerveilles66
@ShinyaMerveilles66 Жыл бұрын
the railroad equivalent of a human centipede
@ClinchfieldRailfan921
@ClinchfieldRailfan921 Жыл бұрын
ITS IS CALLED: THE BEILGUM QUADPELX! THE MOST POWERFUL STEAM LOCOMOTIVE IN THE WORLDDDDDD!!!!!!!!!
@infaredxkingz8786
@infaredxkingz8786 2 ай бұрын
Who the heck thought about building a quintuplex?
@ignislordofflames9274
@ignislordofflames9274 2 жыл бұрын
I appreciate the banjo-kazooie music in the background. Nice stuff
@renakunisaki
@renakunisaki 2 жыл бұрын
A train that's nearly 7 miles long and has a top speed of 5mph... That would be a fun one to wait for at the crossing!
@Pillowcase
@Pillowcase 2 жыл бұрын
You know your content is good when someone who doesn't otherwise care about trains is excited to watch your new videos.
@yellowsdotlxf
@yellowsdotlxf 2 жыл бұрын
Nice mention of the Quintuplex, its outrageous in all the right ways and one of my dream engines to build in lego eventually.
@HaruMochizukiVT
@HaruMochizukiVT 2 ай бұрын
Oh my sweet smokebox, that is one crazy, wild and almost bewilderingly silly locomotive concept. Actually all of them are that kind of bewildering. Also, thank you for including the theme song from Nuts and Bolts in the background music. You made my night
@jackkurze2618
@jackkurze2618 2 жыл бұрын
Train of Thought: "making them some of the largest tank engines ever built". Me: nodding. Double take. "wait. 'Some of the largest?'"
@bearowen5480
@bearowen5480 2 жыл бұрын
There are two significant errors in your opening introduction. The Union Pacific 4-8-8-4 "Big Boy's" only independently swiveling bogey was the forward one. The second set of drivers were permanently aligned with the boiler's central axis and did not swivel independently of the locomotive's frame. Secondly, the Big Boy's two sets of eight drivers were powered by just two high pressure steam cylinders per bogey, not three as stated in your introduction. UP had some classes of non-articulated 3-cylinder compound locomotives, notably the 4-12-2 "9000 Class" solid wheelbase engines, which represented the only use of this wheel arrangement in North America.
@Dragon-Slay3r
@Dragon-Slay3r Жыл бұрын
Heavy pigeon chested was used So the blackbird could use white paint on the painting on both wings as a front so the black crow behind it and then use it as cover for 3 9
@marvwatkins7029
@marvwatkins7029 2 жыл бұрын
Banking locomotives in the United States are referred to as 'helpers'. An American would not recognize the term 'banking'. They would assume that somehow the engine had accounts at a bank.
@Fnafgamer-1987
@Fnafgamer-1987 2 жыл бұрын
Imagine you’re at a crossing and a train miles long is just going at 10 mph over the crossing
@railfanlynx
@railfanlynx 2 жыл бұрын
CSX currently
@emilyadams3228
@emilyadams3228 2 жыл бұрын
It's called Dolton, Illinois.
@HustleMuscleGhias
@HustleMuscleGhias 2 жыл бұрын
Happens to me regularly. I live near the end of a passing track and have to deal with trains slowing down going into and coming out of the hole on a regular basis.
@spacecase13
@spacecase13 2 жыл бұрын
Staggeringly awesome video. So many driving wheels....At 3:44 "Keep up" LOL!! I was so mired in wondering how the weight of the engine didn't just smash the rails to noodles I couldn't even remember my orientation, let alone follow the drive wheel count!!
@metal_wheels
@metal_wheels 2 жыл бұрын
I was about to say "But that's a tender engine!" But ended up eating my words when I saw there's another driving wheels on the coal bunker. Very absurd loco indeed
@Its_Trainz_Time
@Its_Trainz_Time 2 жыл бұрын
The funny thing is even though the Triplexes were a failure, the PRR still built the T1, S1 and Q1 - Q2 engines. Which even though had some success they were still a little extreme, and had similar problems to their predecessors.
@theq4602
@theq4602 2 жыл бұрын
Those were not articulating or mallet engines, however. All of those 'duplex' engines built by PRR were ridged framed, meaning separate sets of driving wheels and cylinders but mounted the same frame with no freedom to turn horizontally. Q2 6199 Actually boasted the most horsepower (not tractive effort) for any steam locomotive ever at 7,987HP.
@Its_Trainz_Time
@Its_Trainz_Time 2 жыл бұрын
@@theq4602 yes I am aware that these are equipped with Poppett Value Gear which doesn’t separate the frame from the boiler, however PRR took great inspiration from the Erie and Virginia when creating their Duplex locomotives (it is also easier to group them together for simplicity). Especially because the PRR believed that they could’ve fixed the design issues allowing larger locomotives to be able to show their true capabilities.
@TheDemocrab
@TheDemocrab 2 жыл бұрын
The T1 at least kinda showed that the concept was workable, but it had a lot of little technical details that had to be right that required precision which wasn't really cheap or as easily available back in the Steam era as it is today. afaik they'd mostly gotten the issues under control by the time they were starting to get obsolete. It'll be interesting to see PRR 5500 when it's finished.
@CarlosDeLosMuertes
@CarlosDeLosMuertes 2 жыл бұрын
@@TheDemocrab PRR actually sent some T1s to the C&O whose engineers were more experienced with multiple sets of driving wheels and largely didn't have any issues with them. PRR engineers were just too used to K4s for the most part and it basically ended up with what would happen if you gave someone who only drives a Camry a Lamborghini. Also just a heads up, 5550 is the one being built today, 5500 was one of the first T1s made and sadly not around anymore.
@TheDemocrab
@TheDemocrab 2 жыл бұрын
@@CarlosDeLosMuertes It's also worth noting that even the K4s were known to wheelslip even if it wasn't an "engine problem" - The K4 being underpowered for its typical use meant that crews were used to giving it the beans regularly, meanwhile the T1 was overpowered for its typical use if anything so it's little wonder really. Oops, thanks for catching that typo.
@Evaunit98
@Evaunit98 2 жыл бұрын
I love it how the theorised quadriplex still weighs less that the big boys
@rjl110919581
@rjl110919581 2 жыл бұрын
THANK YOU FOR SHARING THE VIDEO
@CraigLYoung
@CraigLYoung 2 жыл бұрын
Thanks for sharing 👍
@carneeki
@carneeki 2 жыл бұрын
Please do the Soviet П38 Паровоз ("P38 Parovoz" (which is "P38 steam locomotive")! They were a 2-8-8-4, and as far as I can tell, while 4 were ordered, I'm not sure if all 4 were eventually built, though there are no surviving examples. It's smaller sibling the П36, a 4-8-4 does have many working examples still today. There's not many KZbin videos on the 38, and part of me wants to design a 5in gauge model as part of a really long term project. Thanks!
@PennsyPappas
@PennsyPappas 2 жыл бұрын
Another type of locomotive you can talk about are the Duplex style of engines that the Pennsylvania Railroad had. They're long rigid frame locomotives with 2 sets of driving wheels. The T1 tended to get a bad rap but honestly it's not really deserved. I'm sure you could give a fair short video on them and it be a lovely addition to your channel. Btw the Pennsylvania had 4 different duplexes in all. All with different wheel arrangements.
@russellgxy2905
@russellgxy2905 2 жыл бұрын
There’s so many duplexes to choose from though. There’s also the B&O’s N-1, which was had mirrored drivers, and then there’s countless duplexes in Europe that appeared to be Double Singles. Gaining the additional traction of a four-coupled machine, while retaining the “frictionless” nature of the Single
@PennsyPappas
@PennsyPappas 2 жыл бұрын
@@russellgxy2905 Well I figure it' would be easy enough to do a "reader's digest" style video on all the Duplexes that Pennsy owned. Yes theB&O did own one so that could be mentioned as well. Obviously there are plenty of videos out there on them already but i think it be a great addition to his channel anyway.
@victoriacyunczyk
@victoriacyunczyk 2 жыл бұрын
The T1 in particular got its reputation because engineers took quite a while to get used to their power, and by that time it was too late.
@PennsyPappas
@PennsyPappas 2 жыл бұрын
@@victoriacyunczyk Yeah I heard about that, some people say that's not true but you never know who was behind the throttle and honestly in those days one person says something and it spreads like wildfire and it just becomes facts. I believe that it is true and that the T1 reputation is over exaggerated to some degree. Did it have issues yes but are they as bad as people claim I doubt that but hey thays just how i see it.
@ericcrockett479
@ericcrockett479 2 жыл бұрын
Another issue that the triplex also suffered from was Wheel slippage on the rear set of drivers. As coal and water were used out of the tender the weight on the rear set of drivers would become less and less making them very easy to slip compared to the front and center set
@classic_britain
@classic_britain 2 жыл бұрын
It was a good idea in theory but they could only do about 8MPH without running out of steam because the boiler we just not big enough to feed all those cylinders.
@Colt45hatchback
@Colt45hatchback 2 жыл бұрын
Makes me wonder wether with an admiralty pattern 3 drum boiler and running on oil or propane, with all the cylinder exhausts plumbed in for assisted draught through the boiler, or even with a condesor setup to save water and electric forced draught implemented, wether it would have been sufficiently efficient to have been doing long haul stuff at a higher speed
@jamesberry3230
@jamesberry3230 10 ай бұрын
the boiler was sufficient in size and draft ,it was the mechanical stoker that was the problem, a major flaw of all mechanical stokers is their uneven distribution and incomplete coverage of grate thus limiting the fire
@jordanalexander615
@jordanalexander615 Ай бұрын
I enjoy your videos alot more than some of the other KZbinrs. One guy is just loud and his voice alone is like nails on a chalkboard.
@TheLocomotiveEngineer
@TheLocomotiveEngineer Жыл бұрын
I'd never thought of Triplexes as tank engines before 😂🤣
@Double_D__
@Double_D__ 2 жыл бұрын
My first thought was, "bigger and more of an absolute unit than Big Boy? No way..." I really didn't know what I was gonna see.
@tracynation2820
@tracynation2820 2 жыл бұрын
A super video. A minor thing though, the articulated locomotives have a + between the articulation, such as VGN 2-8+8+8-4 or the UP 4-8+8-4 Big Boy. Ridgid frame locomotives like the Pennsylvania Q1 4-6-4-4 did not have a + because they were not articulated, and technically, they would be tender back also, so it's actually a VGN 2-8+8+8-4TB, designating that the locomotive carries its fuel and water on the locomotive frame. 💙 T.E.N.
@tracynation2820
@tracynation2820 2 жыл бұрын
P.S. To the comments people, there were very few three cylinder locomotives in America, with a nice list of them somewhere in the comments below, and no articulated steam locomotive produced in America has three cylinder power, mostly due to maintenance issues and costs, but there are some in other countries. 💙 T.E.N.
@jamesberry3230
@jamesberry3230 10 ай бұрын
the plus sign was used for the Garret wheel arrangement in European systems the American Whyte system used the dash between wheel groups
@snigwithasword1284
@snigwithasword1284 2 жыл бұрын
When minimizing labor costs are the first and last concern of those in power, these are the absurd length they'll go to.
@OptiPopulus
@OptiPopulus 2 жыл бұрын
Plans for a 2 8 8 8 8 2? What were they trying to do, go vertical?
@BAKU2K2
@BAKU2K2 2 жыл бұрын
And the quadruplex locomotive could've worked have the front and rear bogies been articulated, and perhaps shortening it to a 2-6-6-6-6-2 wheel arrangement.
@Leonardo-cw1dd
@Leonardo-cw1dd 2 жыл бұрын
bloody hell thats quite a tank engine
@1_railfan
@1_railfan 2 жыл бұрын
I think 2 sets of driving wheels (Like BigBoy & a Virginian Railway Class AG) should be the limit of a steam locomotives. It's like the old saying: "Bigger isn't always better".
@russellgxy2905
@russellgxy2905 2 жыл бұрын
What about Shays and Climaxes though? ;)
@1_railfan
@1_railfan 2 жыл бұрын
@@russellgxy2905 Fair point, them too.
@germantanker131johnny2
@germantanker131johnny2 2 жыл бұрын
Literally the definition of: "Go hard or go home" OR "Grab my beer"
@PBGetson
@PBGetson 2 жыл бұрын
What size turning radius could those large engines take, or were they primarily used on straighter sections?
@Traingamer5
@Traingamer5 2 жыл бұрын
It took me a minute but then I was like is that banjo kazooie music
@hozkahilgarri3936
@hozkahilgarri3936 2 жыл бұрын
Now imagine waiting at a railroad crossing for a train to pass which is 6 miles long train and going 10mph.
@LegoMiester14
@LegoMiester14 2 жыл бұрын
I never saw this as a tank engine, but I see it as one now.
@allamericanchris429
@allamericanchris429 2 жыл бұрын
What do u mean the big boy had six cylinders? It only has four. Nice vid keep up the good work!
@waycoolscootaloo
@waycoolscootaloo 2 жыл бұрын
*Love the "Banjo Kazooie" music in the background of this video.* Such a great game that was released on the N64 back in the day. The Big Boy however is the true largest steam locomotive that was actually ever built and put into operation. Yes, there are some very worthy contenders for the largest title like the Yellowstone's and the Allegheny locomotives. (All U.S.-built locomotives still) But when you take all the different ways to measure a locomotive and average those numbers out, the Big Boy is the largest locomotive. Again the runner-ups in a neck and neck race are the Yellowstone's and Allegany. The XA Triplex and Erie class are also then good contenders in some measurements. But in the end, U.S. locomotives dominate in this whole class of the world's largest anyways. The top 10 contenders are all U.S.-built locomotives. But as mentioned in the video, the U.S. has the heaviest loading gauge. So hence the least amount of restrictions for weight and overall size.
@sambrown6426
@sambrown6426 2 жыл бұрын
AA-20 and Beyer-Garratt have entered the chat.
@waycoolscootaloo
@waycoolscootaloo 2 жыл бұрын
@@sambrown6426 Yeah, but these locomotives are still considerably smaller than U.S. steam locomotives. And the Russian locomotive couldn't even be used at all and was promptly scrapped. It was never actually used by the railroad except once as a publicity stunt. But it never pulled any Revenue Freight because it was too strong for the couplers of the time and too heavy for the tracks in Russia. The British locomotive is just a small locomotive centered between a water and oil tank bogey's. So these locomotives are quite a bit smaller than their American counterparts and don't even make the top 10. But keep in mind that the US also has the world's heaviest loading gauge. So that's why the U.S. can build such incredibly huge massive locomotives. 🙂
@sambrown6426
@sambrown6426 2 жыл бұрын
@@waycoolscootaloo True.
@stonedperson97
@stonedperson97 2 жыл бұрын
Imagine a 2-10-10-10-10-10-2 locomotive pulling, like, a 15 mile long freight train doing 5mph
@aidensypolt
@aidensypolt 2 жыл бұрын
What about the Hexaplex engine?
@definitelynotakgbagent6612
@definitelynotakgbagent6612 2 жыл бұрын
Hear me out, simple articulated triplex locomotive
@aullukan
@aullukan 2 жыл бұрын
THATS ENOUIGH SLICESSSSS
@jiggyjohn6949
@jiggyjohn6949 2 жыл бұрын
I'm not gonna lie The BGM SOMEHOW fits with the theme of the video
@TrainMaster04
@TrainMaster04 2 жыл бұрын
Santa Fe also had some crazy designs as well. By the early 20th century the SF got the crazy idea of take pre-existing locomotives and add another driver set and boiler section. It was cheaper to only have half a locomotive built so it became popular for a few years. The biggest locomotive stemmed from this venture was the 2-10-10-2 and the most successful as the 2-6-6-2.
@Tjalve70
@Tjalve70 Жыл бұрын
Do you also have the specifics for Snowpiercer?
@AdventureswithGeneral
@AdventureswithGeneral 2 жыл бұрын
Every time you say "railroad" I just flip out. Lol.
@infaredxkingz8786
@infaredxkingz8786 2 ай бұрын
Brits being British as usual
@JennyBlaze253
@JennyBlaze253 2 жыл бұрын
Sometimes we gotta ask ourselves "has science gone too far?". For the proposed idea of a quadroplex and quintoplex, I'd say yes.
@gregbaird1338
@gregbaird1338 2 жыл бұрын
Cool video lots of good info even if some of it might be wrong. A friend of mine has a O scale model of one of these engines and we actually tried to pull a 300 car train with it and broke couplers trying to do it so even models have the same problems
@magnificus8581
@magnificus8581 2 жыл бұрын
I love these crazy ideas!
@Pensyfan19
@Pensyfan19 2 жыл бұрын
I never considered the Triplex as a tank engine until now. Thank you for your words of wisdom.
@varunmehta1821
@varunmehta1821 2 жыл бұрын
Can someone please explain "each bogey was powered by 3 cylinders" @ 0:15?
@CustomiZe_
@CustomiZe_ 2 жыл бұрын
Each bogie has the 2 cylinders on the outside and 1 cylinder on the inside of the bogie.
@RockerTopper-hh3ru
@RockerTopper-hh3ru 2 жыл бұрын
I’m pretty sure that’s flat-out incorrect. As far as I know the big boys follow the American convention of using two sets of cylinders per set of driving wheels.
@CustomiZe_
@CustomiZe_ 2 жыл бұрын
Yeah just googled it and there are 4 cylinders in total so I'm not sure what he meant then.
@varunmehta1821
@varunmehta1821 2 жыл бұрын
@@RockerTopper-hh3ru all locomotives have one reciprocating valve and a driving piston. All the videos I have seen mention both the valve and piston as pistons.
@cr10001
@cr10001 2 жыл бұрын
@@varunmehta1821 Yes but that's not what we count when counting the number of 'cylinders'. 'Pistons' generally refers to the main power-producing pistons in the cylinders, of which all locos have at least two, some three (quite unusual in the US but common in Europe), or four. The steam was supplied to the cylinders through slide valves in earlier designs (virtually the whole of the 19th century), and piston valves in later designs - but those were never counted as 'pistons'.
@Hans-gb4mv
@Hans-gb4mv 2 жыл бұрын
Anyone know what Belgian locomtive he is refering to at 3:25?
@Full_Otto_Bismarck
@Full_Otto_Bismarck 2 жыл бұрын
Is that... The spiral mountain theme from Banjo Kazooie?
@Readdisyougey
@Readdisyougey 2 жыл бұрын
3:40 That’s 50 driving wheels keep up Me: IM TRYING OK?!
@BronyumHexofloride
@BronyumHexofloride 2 жыл бұрын
with this in mind what would it make a JR N500 Shinkansen? since all wheels are driving wheels and they are normally seen in car sets of 12 or 24 units... a quadro-Dodecaplex? a tetracontaoctaplex? since its wheel config for the 12 car version woud essentially be a 0-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-4-0
@bradsmckay
@bradsmckay 2 жыл бұрын
Electric and diesel multiple units with 2x2 axle bogies are classified as Bo-Bo, so you could have a 50 car Shinkansen and it would still be Bo-Bo
@emilyadams3228
@emilyadams3228 2 жыл бұрын
@@bradsmckay If you whip out your telescope, you might catch a glimpse of that joke as it flies over your head.
@vectorbrony3473
@vectorbrony3473 2 жыл бұрын
One big issue was the rear set of wheels was when the water and coal was used up it in the tender above, the rear wheels would begin to slip and loos strenght
@Anonymous-sb9rr
@Anonymous-sb9rr 2 жыл бұрын
How do you even go around a corner with one of these things? Yes, sets of wheels swivel, but they would also have to be able to move side to side a lot with vehicle that long.
@matthewkirby6080
@matthewkirby6080 2 жыл бұрын
Please, 🙏 Could you do an episode about the unsuccessful Franco Crosti boilered 9Fs?
@justsomeguy5628
@justsomeguy5628 2 жыл бұрын
Nowadays, the average train is over 6 miles, but they have diesel and run on very specific tracks. This just seems surreal for something with steam power single-heading a train. I don't even know that the cars at the time had the strength to hold up due to the engine decelerating, and would probably require loads of engines just to get the entirety of the train in motion without breaking. I can only imagine how majestic it would have been to see one of these in action, even if only for jobs that didn't use the full capabilities of what was intended.
@robertbate5790
@robertbate5790 2 жыл бұрын
I've never heard of these engines. Always thought the Big Boy's were the largest built. Thanks for an interesting article 👍👍
@joshuahudson5336
@joshuahudson5336 2 жыл бұрын
The 4000s were the largest. The big boys weighed the most, and had the longest engine body of any reciprocating steam locomotive.
@garryferrington811
@garryferrington811 2 жыл бұрын
Largest were the Chesapeake and Ohio's three absurdly large steam turbine failures.
@joshuahudson5336
@joshuahudson5336 2 жыл бұрын
@@garryferrington811 they were longer, not heavier. And they are not steam engines. The largest steam engines are the Big Boys
@jeanbonnefoy1377
@jeanbonnefoy1377 2 жыл бұрын
Maybe for next season of Snowpiercer? Will have to talk about it with Mr Wilford...🤔😀
@toby070
@toby070 2 жыл бұрын
Perhaps these locomotives were ahead of their time. At Nederland, we have Electrical Multiple Units coded DDZ; The motor coaches (mDDM) have 3 sets of bogies under them.
@triton199
@triton199 2 жыл бұрын
didnt expect to hear banjo kazooie music on a video about triplex locomotives but here we are. nice lol
@Garrett_Thompson
@Garrett_Thompson 2 жыл бұрын
You should do a video on that Italian quadraplex. And maybe the Virginian AE 2-10-10-2.
@primrosevale1995
@primrosevale1995 2 жыл бұрын
If you ever hear anyone say Bertha was too much just show them one of these.
@Ryder-a-Blaze
@Ryder-a-Blaze 2 жыл бұрын
24 driving wheels? I can think of something much funnier than 24
@AJ-ku4uj
@AJ-ku4uj 2 жыл бұрын
25
@Xetta_Mode
@Xetta_Mode Жыл бұрын
my right ear liked the banjo xD the music's catchy 🤘
@cdjhyoung
@cdjhyoung 2 жыл бұрын
My understanding of the Erie Triplex engines is that they were created to haul iron ore trans away from the docks in Erie, PA and up a significant grade to reach the ground level where the mainline was. They were only expected to move the train about ten miles. I also believe this was done as a pushing action with a much smaller engine on the lead of the train. These engines succeed doing the job they were designed for for about 20 years, a pretty good life span for any mechanical object in heavy use. But they had the short comings stated: not enough boiler to produce enough steam to fully use the capacity of the engine cylinders; too little storage capacity for coal and water and lastly they were highly complex engines and hard to keep in service.
@theimaginationstation1899
@theimaginationstation1899 Жыл бұрын
They were to bank normal traffic up one hill in northern Pennsylvania - 7.75 miles long.
@JeremiahPickardMusic
@JeremiahPickardMusic 2 жыл бұрын
Imagine the wait at the level crossing if it pulled it's full weight!
@benjamingesinski9170
@benjamingesinski9170 2 жыл бұрын
I topic I would like you to talk about are the fireless steam engines that filled with pressurized steam. It would be neat to hear you explain how these engines worked.
@kennethnevel3263
@kennethnevel3263 2 жыл бұрын
They are just a pressure tank that is filled from a factory boiler and used near the factory and never go very far from the factory .
@benjamingesinski9170
@benjamingesinski9170 2 жыл бұрын
@@kennethnevel3263 I just thought they might make an interesting video idea.
@kennethnevel3263
@kennethnevel3263 2 жыл бұрын
@@benjamingesinski9170 yes it would as it is not a normal steam engine .
@kennethnevel3263
@kennethnevel3263 2 жыл бұрын
@@benjamingesinski9170 Porter is one make that comes to mind , and there was others too .
@SodorTrain1225
@SodorTrain1225 2 жыл бұрын
If Big Bertha was American, she'd be a Triplex.
@horsepowermultimedia
@horsepowermultimedia 6 ай бұрын
That does make sense since she is also a banking engine.
@miwer1000
@miwer1000 2 жыл бұрын
Guhu Wahey Nice music mate
@ReubenAshwell
@ReubenAshwell 2 жыл бұрын
Honestly, I didn't know any of this until now. Very interesting indeed.
@LoneWolf-qq9oy
@LoneWolf-qq9oy 2 жыл бұрын
Ah, i see they used the kirble school of "when in doubt add more thrusters" except instead they went with "when in doubt ADD MORE WHEELS!"
@sheevpalpatine3351
@sheevpalpatine3351 2 жыл бұрын
I have a friend who has an MTH O scale model of a triplex. I’ve seen it and it’s absolutely nuts.
South Africa's Diesel busting Steam Locomotive - SAR "Red Devil"
10:09
Train of Thought
Рет қаралды 108 М.
I Finally Got the MTH Triplex Steam Engine!!!
15:26
RBP Trains
Рет қаралды 290 М.
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Everything Wrong with the Trains in the Polar Express
28:29
Train of Thought
Рет қаралды 83 М.
Union Pacific's Big Boy: A Giant Amongst the Rails
14:45
AmtrakGuy365
Рет қаралды 45 М.
Baldwin's most absurd locomotives ever (The Triplexes) |Garbage On The Rails Ep 10
16:05
Andrew Raila ‘Bammers!(AKA The RocketCity Railfan)
Рет қаралды 20 М.
The wheels that made Steam Trains more powerful - Locomotives "Boosters"
9:54
BIG BOY is NOT the BIGGEST? What is then?
10:34
Hyce
Рет қаралды 290 М.
Pennsylvania Steam Tier List
29:13
G-Man
Рет қаралды 17 М.