The Most Common MISTAKE Made When Repointing Darts

In this video I point out the most common mistake made when using a hand held repointing tool. Avoid doing this! I also give a couple tips that make repointing darts much easier. Enjoy!
#Darts #Repointing #HowTo

[@WorldwideDarts]

*Broken Point removal with Alum powder -* custommadedarts.com/pages/broken-dart-point-removal

[@xmtowntyx]

Trying alum tonight

[@jayhawksoundthrow7503]

Thanks for the tip Sir. When my darts were repointed, I asked someone to do it, sent it and waited to be returned the next day. Now when I have a repointer, I can do it already. Thank you From the Phillipines 💗🎯

[@WorldwideDarts]

You're welcome! 👍🏻

[@skeller61]

Great video. I got the Harrows repointing tool about a month ago. I’m still waiting on several sets of darts and points to clear customs, so I appreciate your lesson ahead of when I will do it myself.

[@Strohat8]

Great tips thanks! Will have to try this someday.

[@juleswinnfield6930]

Great video!!! I did realize quit some time ago to let the middle aligner move freely (you might of even had a previous video about this). One problem is if u hold it tight you can get bent points as I have experienced.

[@greggsmith1612]

I have this exact same repointing tool. Saturday night I replaced points in 4 sets. On my Phil Taylor 95Gen 1 I was putting Target Storm grooved points in. For whatever reason I managed to get 1 in a bind probably from holding the tool as you showed and it was going in pretty hard. Next thing I heard was a snap. Luckily it simply broke the point and not the barrel. Had to open another set of Target Storm grooves points to complete the job. Second try worked fine. I have re-pointed no less than 30 sets so far and this was my first issue ever. Still love the tool but your suggestion about holding it is critical.

[@jrg6960]

Thanks for the upload! Great tips amd will rewatch when my repointer arrives next week! Cheers 🍻 Boom 💥

[@WorldwideDarts]

You're welcome JRG. Keep an eye out for some awesome vids this week. If all goes well there should be a 🔥🔥🔥 vid on Tuesday 😁

[@kevspencer5744]

The last time I repointed my darts I simply used a rivet gun to extract the points and then to install the points I used a rubber mallet and a block of soft wood and put the point in place by hand stood the dart upright on the wood and hit it with the mallet. It worked out great. Maybe I was lucky and the tool that you are using is not expensive so I may get one.

[@moulletsmayhem2334]

Great tips

[@andyproctor3588]

Definitely good advice I have the same one you have I use the Barney points they have that good grip I like to put my middle finger on thanks world wide as always and Happy Thanksgiving✌

[@gemenizr8144]

Again great vid!

[@harty174]

Hi, my mistake was not screwing the dart on fully and then tried to go back down on the point I almost ruined the thread on the dart pointer, cheers Robert

[@danstotz905]

Thanks World Wide. This was a great video. I now what I have been doing wrong

[@WorldwideDarts]

Glad to help

[@alanmeasures8337]

Good vid WWD.

[@xmtowntyx]

Welp wish I wastched this before.last night. I have the same repointing tool and it snapped in the Barrell bc I was holding in the middle lol damn. Time for alum powder route!!!! Thanks for. vid

[@joek1519]

When should you do new points over sharpening? Also where did u get that shelf that holds your darts

[@davevleminckx4954]

Use a Bull's repointer. And always use Loctite. But had to change the collet sometimes because I used too much

[@jtpalooki7757]

Man!, repointing darts should be a sport on its own? Just one more thing to practice 🤨.. but trial and error on matching points, stems and flight to your favorite barrel is 1/2 the fun! And props to my man Jose de Sousa; the Portuguese🇵🇹 have conquered the 🇵🇹PDC🇵🇹!!

[@joemahma3457]

After making the jump to a 43 mm, I took first place last night. The improvement it’s made on my doubles is fascinating, I highly recommend people give it a try. If I can switch points out, anyone can!

[@kenhearrean7943]

I just posted up above after watching this video & you can see where I talked about having shorter tips; I've always used about 35 mm, but in looking for some grooved-type tips, w/o thinking, I purchased 32 mm, but when I changed them out (even though the previous were only 35 mm), that 3 mm shorter length certainly feels short. Now I haven't thrown with them yet, but just as you stated in your post, you tried longer tips & liked them better; I've seen several other KZbin videos where several have said the same thing. Do you still feel the longer tips work better for you & if so, since the ones I just replaced are only 32 mm, so how much longer would you say as a guide?

[@gitman3486]

Something I did with my repointing tool was run a diamond file over all the sharp corners and outer edges. Made it much more comfortable to use in bare hands

[@WorldwideDarts]

That's a great idea!

[@bobbymalta73]

Thank you.

[@stephenconnolly3]

I have 1 set of Loxley bambas I would recommend you try them if you haven't already lovely dart

[@seankeogh9085]

Great review I seen that tip ages ago on a previous vid you done and it helped me so much when I bought my own repointer only recently, I happened to scuff my points going in any tips on how to stop that happening the point was slipping in the clamp but I could not tighten anymore?

[@WorldwideDarts]

They do sell spare repointing parts at Darts Corner. Sometimes the part that clamps gets a bit beat up. Maybe try replacing the parts? www.dartscorner.co.uk/product_info.php?cPath=2736_2738&products_id=20230

[@DragonNL25]

Hello, can you tell me what barrel that is you are using ?. I'm looking for a dart like that

[@kenhearrean7943]

Thanks for the video; I was having trouble trying to change out a set of tips & your video helped me figure out my mistake! Btw, I do have a couple of questions; 1st, I only play steel-tips & since I use one of my fingers to lightly touch part of the tip, getting tips that have grooving in them is what I try to find. Anyway, I've found a few thru Dart Shopper, but the grooving doesn't seem to be very deep; when I watch the BDO Pro's & others, I see a lot of them also use grooved tips, but theirs seem to be much deeper grooving, which I would think would, not only help secure the darts into the bristle boards better, but also allow for better gripping/touching of the tip. I just received some I ordered which are 32 mm & once inserted into the barrel, the darts seem fairly short, possibly only 2-3 mm shorter, but definitely shorter. Now I'm certainly not a pro, but I've always used shorter tips, but slightly longer (like 35 mm). But I saw someone's KZbin video where he indicated more players are using longer tips, but I didn't catch the reasoning! Last question, when my wife & I retired & moved here to Central Florida from Southeast Texas, I decided to possibly start playing again after all these years, but there doesn't seem to be any leagues or tournaments close to where we live now, which is Leesburg & about 60 or so miles north of Orlando. There is a league/weekly tournaments in Ocala or Orlando, but just too far to drive for a weekly league. I hear talk of others playing either tournaments or leagues online, but I haven't looked into it & have no idea how than can even possibly work...any suggestions on this?

[@T-rock_chr0n1c]

Dart counter app..

[@roryjames5763]

I bought a mission repointing tool. And some 35mm vanute points 👌. They fell out of my amber jack's. So I used the super glue. Cheers for the tip. I'm finding a huge difference with the 35mm points. I'm finding that the fly straighter.

[@WorldwideDarts]

Good to hear. I have superglue holding in the points of my older One80 Reload's that were my match darts for years. Does the trick

[@roryjames5763]

@@WorldwideDarts sure does. I've also put 35mm points on my Gary Anderson phase 3s. Unbelievable difference. There a total game changer. Keep up the good work 👌

[@WorldwideDarts]

@@roryjames5763 Cheers Rory. You're spot on though. I noticed a HUGE difference to a couple reviews I did recently where I switched from 26mm to 35mm points. Day and night difference. Best of luck with the new setup

[@bobbymalta73]

Cheers thank you mate.

[@WorldwideDarts]

No problem 👍

[@lizziemcdonald1748]

can all darts be repointed or is it just some brands and when should you replace the point

[@btk1]

I use superglue on every point. Having a point stay in the board when you retrieve your dart mid-game is a nightmare I’m in no rush to recreate ever! Haha. I actually thought your 101 tip was going to be not to hold the point too tightly or loosely. I’ve had winmau freeflow points get nicked during fitting because the point either slid into the clamp or slipped a bit during clamping, too close to the fluted bit probably. Good tips!

[@bigfootshaber1048]

Great tips. I have the same repointing tool. I repoint most of my darts. I grip the darts where my middle finger is on the point so I change them to grooved point. Keep up the great videos.

[@WorldwideDarts]

Cheers GC 😁

[@mauricemcilwaine8470]

How do i get a point out that doesnt seem to want to move

[@sped6954]

Thanks for the tips. I'm going to be ordering a repointing tool in the next couple days, probably the Designa one, and I have a question regarding points. I have a set of Designs Patriot X in transit and they should be here within the next week or so. I'm thinking about changing the points in the very near future. I prefer smooth points, no barbs or board destructor points or anything like that. I'm thinking about doing this to get rid of the lip where the barrel and point meet. What would be the best points for these barrels? There are so many to choose from, and I'm at a complete loss. Also, I like that piece of advice about trying out the repointing tool on some cheapie brass barrels, just to get a feel for how it should be. I was actually going to be doing this exact thing so I don't destroy a set that I'll miss. Anyway, any info that can be shared is welcomed and would be greatly appreciated.

[@WorldwideDarts]

Can't go wrong with a smooth Target Storm point. Just make sure you watch my video on how to repoint Target Storm points 👍🏻

[@sped6954]

@@WorldwideDarts Ok cool and thanks for the info on that other video. Is that the one that deals specifically with points that flare out and how to handle them?

[@francescogiussani7330]

Great video here! I am gonna need to repoint my darts, but I am not really sure which points should buy... What do you recommend? They should go on Designa exterminator 19g. They are actually my match dart. Thanks, I really appreciate your help!

[@WorldwideDarts]

Love the Exterminators. I would put a smooth target Storm point on them to eliminate the lip where the point meets the barrel. You'll be amazed at the difference it makes.

[@francescogiussani7330]

@@WorldwideDarts thanks a lot!! I will definitely try them!

[@memeluama7112]

THANK YOU

[@WorldwideDarts]

Thank you for watching 👍🏻

[@rodgerroadkill339]

Could you make a video of the pros and cons of different dart lengths please

[@WorldwideDarts]

I do have something like that planned sometime soon 👍🏻

[@rodgerroadkill339]

@@WorldwideDarts I meant to say point lengths

[@LJ3813]

Both dart length and point length would be appreciated

[@IzzyRacing]

Thanks for the video, I wanted to ask the following. Most of the time when I repoint darts, when I roll the dart afterwards the point rolls perfectly straight, but sometimes I get a point that slightly wobbles near the tip, is this just the point or is it because of something I am doing during the process?

[@WorldwideDarts]

That could be a combination of a couple things or it could just be that the point is slightly bent from the factory. I've had a couple points that weren't perfect but as long as it's not too bent it shouldn't affect anything.

[@IzzyRacing]

@@WorldwideDarts Thanks for the reply!

[@DookyShoes1]

This seems like such common sense, but I guarantee you I'd have done it wrong.

[@pourpiertoxique3854]

Hi WWD ! Thanks for the advice ! 🍻 Just one question about the Alum Powder: Does it affect the paint on the barrel ?

[@WorldwideDarts]

I think it wouldn't be good for paint.

[@SuperChalkster]

nice video, a point snapped off my dart today, it is actually cheaper for me to buy new darts then new points and this tool, but its still good to know, i might get this anyway tho so i can get a point with grip on it as my middle finger is on the point during my grip. question. can you install soft tips into steel tip darts?

[@geraldhills41]

Biggest problem I have had is braking the point getting it out !

[@claytonmcdonald9520]

Good video. You want to see the point being set.

[@golfboy7438]

Hi mate I'm after some advice I'm repointing Harrows darts with unicorn volute shouldered points but the bit that goes into the barrell is too long by a few mm is there anything I can do? I've tried filing the end down but it's just not working?

[@WorldwideDarts]

Strange, Harrows darts usually have a deep point hole. They might go in kinda hard. I recently had an extremely hard time repointing a set of Harrows and I used to compete in grip strength events. Are you sure you're giving it enough of a try?

[@golfboy7438]

@@WorldwideDarts yh I'm giving it as much as I can, i have 2 sets of Harrows darts and both the same, 3mm sticking out. Annoying because the Volute are 42mm and the longest shouldered points you can buy. Thanks anyway 👍

[@patricklangston3399]

How do you know how far to turn the key to judge how much of the point goes into the dart

[@WorldwideDarts]

You should be able to feel the point bottom out.

[@elessard]

Speaking of repointing, I have the Designa tool with the handle, I repointed many sets of darts using Target Storm points (smooth, nano grip, lasered), with Winmau Freeflo points or regular straight black points from Mission/Winmau and I never had a major issue. Only scratched a couple of points, might have been because it was too tight on the point, or not enough and caused it to slide a bit… Last night I tried repointing my Elite95 darts with Harrows Apex points, and it’s a mess as there are no straight section on the points, they’re tapered all the way. Any magic tip for this? The point slides, scratches and bends… total mess! Other question is about the Bull’s repointing machine, would this be the only tool that prevents the issues I have? It looks like a different system. It’s expensive and don’t want to throw away the money just to try it… Thanks and keep the great videos coming WWD 🤜🏻🤛🏻

[@WorldwideDarts]

Harrows Apex points are a headache to repoint. Like you said, there's no place to clamp down on them without crushing them or scratching them. I'm not sure how the Bull's repointer would be any different.

[@elessard]

@@WorldwideDarts I can’t tell for sure as I can’t find the details I want about the Bulls repointing machine, but it looks like the point is only holding in a hub with a tapered cavity in it… if that makes any sense, I’d explain better in French lol. Trying to get more details and gonna ask Darts Corner too!

[@elessard]

Follow-up: Well, the Bulls machine isn’t made as I thought it was, so not buying it. It also leaves marks. Good thing for the wallet lol, and I’m gonna work on my idea at the machine shop to try making my own repointing tool, or at least an add-on we could all use with our tools. Oh and, Apex points are trash. I measured them and the inconsistency is huge between points of a same set, and between different sets too. Size of the widest tapered parts varies from 3.16mm to 3.44mm, making some lips disappear, or not. Bottom line is: Designa Repointing Tool + Target Storm / Winmau Freeflo points all day people.

[@tiffanykemp1109]

I put a wrap of electrical tape on the point prior to clamping into the repointing tool.

[@deadpoolkoa7108]

A guy done mine and they fell out stuck to board when my team was in darts final.

[@MrLongboarder87]

I have a rule question. I use a grip that rests the point on my pinky just after the fingernail right above the cuticle. After an hour of darts it starts to tear up the skin so I stated wrapping a 1/4” piece of sport tape around my finger. Is there a rule in any of the big organizations that doesn’t allow the use of sports tape or “grip enhancers” on your throwing hand?

[@WorldwideDarts]

No rule that I know of but have you tried Trident 180 nose cones?

[@MrLongboarder87]

@@WorldwideDarts I’ve used them but it wouldn’t help with my pinky problem. I use a 5 finger grip. Thumb and pointer rear grip, middle finger right behind the nose cone, ring finger on top of point right at the barrel, pinky under point about mid point. It’s a newer grip I’ve started using so I may develop a callous overtime. Thanks for the advice and great videos, it’s helped my game.

[@mikeleahy244]

I can’t get 1/3 of old point to come out. Suggestions?

[@layout1237]

The points in the Harrow darts are using need replacing but they look like they go all the way though the dart can I still replace them they are Harrow genesis ?

[@WorldwideDarts]

Yes. Should be just a normal 32mm point. Simple to replace

[@layout1237]

@@WorldwideDarts thank you so much big fan of your videos always great content!

[@11Paks]

Hello Worldwide! Is it somehow possible to screw the points into the barrel too much? Or is it impossible and there is simply just enough room for the necessary length (part) of the point in the barrel and you cannot go any further? Thank you for your answer! :)

[@WorldwideDarts]

I'm not quite sure what you're trying to ask but no, you can't screw in the points

[@11Paks]

@@WorldwideDarts I'm sorry for not being clear enough. The thing is that I have recently bought Target Diamond Pro 36mm points and today I decided to put them into my darts (Adrian Lewis Gen 4s) instead the standard short silver points with which they came in from dart shop. However, when I finished installing them, they were not much longer that the original short points (there was 1-1,5mm difference) and I just didn't feel it was right. So I decided to ask. And in the meantime, I pulled the new points a little from the barrel which made the outside part be of approximately 30mm which is, as far as I am concerned, appropriate with the points of this length (36mm). Thank you very much for your help.

[@WorldwideDarts]

@@11Paks Darts usually come standard with 32mm points but 5mm of that is inside the barrel. So about 27-28 showing. The 36mm points should be sticking out of the barrels about 31mm or so

[@11Paks]

@@WorldwideDarts Thanks for your help! 30-31mm is currently the length of the part of the points which is sticking out which is great to hear! Thanks again for your advice, WorldWide! :)

[@DrHugbox]

I'm basically incompetent in most things, so I just paid a couple bucks for Darts Corner to repoint my new darts instead of spending another 40 for a tool, then being a tool myself and breaking something...

[@WorldwideDarts]

That's always a great option as well 👍

[@nathanjackman5188]

When repointing darts is there glue or anything you need when putting new points in?

[@WorldwideDarts]

Nope, 99% of the time it's just a press fit that holds them in.

[@williamfotiou7577]

I have the exact same tool , and I get a nick on every point I replace, it’s getting annoying and expensive. I ruined a set of Apex points because they bent when I tried to insert them. I’m extremely good with tools, and my hands, but obviously I’m doing something wrong. Got any insight? Thanks

[@WorldwideDarts]

I have several repointing videos. Make sure you watch the one about repointing Storm points

[@ng7383]

What store did you refer to for the discount code?

[@WorldwideDarts]

Darts Corner

[@BADThreeXL]

I just got this repointer in the mail & attempted my first set after watching a few videos. Dart #1 got stuck & (I assume) stripped the threading on the little piece that goes into the top of the barrel. Any one have any tips on what may have went wrong or even how to fix this situation. Repointer is pretty much unusable right now. Barrels will thread onto the device, but the thing just pulls right out of the barrels.

[@WorldwideDarts]

Oh man! How'd you manage that?

[@BADThreeXL]

@@WorldwideDarts Not too sure, followed all instructions/tips I found before attempting it. Took 3 people to get the dart off of the machine (1 to hold dart, 1 to pull repointer & 1 to laugh at two grown men that looked like they were having an extreme hand holding competition). Hopeful to find a replacement threaded nub for the machine.

[@mrfahrenhorst8620]

Any idea how to fix a repointer which has seized at the top?

[@WorldwideDarts]

Not sure on that one. They do have anti seize spray you could try. Maybe even WD-40 would do the trick to loosen it? I'm not really sure to be honest.

[@chrisgraves9430]

I had that problem caused by never lubricating the main bolt thread.. Removed pin and heated main body with a heat gun to unscrew bolt. Fortunately the thread in the body was ok after running a thread tap through so a trip to a local engineering shop for a replacement bolt and job done. Added advantage the new bolt has 17 mm head so knuckle spanner fits easily and is more comfortable than the old Allen key

[@davevleminckx4954]

Loctite. That's why I love Bull's because you have a collet for smooth and one for grooved points

[@elessard]

The way the Bulls repointing machine is made, does it fit for all kind of points like Target Storm, Winmau Freeflo, and Harrows Apex (which are tapered) cause I’m having issues and thinking about investing the money, thanks!

[@davevleminckx4954]

@@elessard Normally yes. Put storm points in. Freeflo points in and also Apex Ridge & Apex Lance points in. But if you use Loctite like I did you can't get them out anymore 😉

[@davevleminckx4954]

@@elessard But you will have to get the collet for grip points because it normally comes standard for the plain points (the collet of the Bull's repointer) forget to mention ;-)

[@craigbonass5042]

Anyone know, if I put a dart with black nitride coating in vinegar for 6 weeks to dissolve the point will this also remove to coating on the dart? Thanks in advance

[@WorldwideDarts]

It should be okay but have you looked into using alum powder? custommadedarts.com/pages/broken-dart-point-removal

[@craigbonass5042]

Yeah, might be the better option, thks for reply, btw your channel is great

[@ericparker415]

How do you know when the point has bottomed out?

[@WorldwideDarts]

You feel it hit while tightening

[@bbohning]

This is for FIXED point darts, correct?

[@WorldwideDarts]

Correct. But it's also 2021 and this is the only type of point there should be. The movable points were a massive gimmick. One of the worst inventions ever in darts.

[@filipkrcmar6330]

Is it possible to repoint the darts when just 1mm is out of broken point??

[@WorldwideDarts]

Not with the tool. You'll have to dissolve the point with alum powder

[@Steve-bo3hg]

I tried repointing and one of the points wouldn’t come out. Any suggestions on how to remove it?

[@WorldwideDarts]

Maybe try heating up the front the barrel and see if that helps. Some of the points are really stuck in there and require some force to break them free. I had a tough time with a recent set of darts I repointed. I forget what they were but I want to say the Simon Whitlock darts I just did a video on. The OG points were really jammed in there

[@Steve-bo3hg]

@@WorldwideDarts Thanks. I will give it a try.

[@boof29]

Noob question, so glue isn’t used to repoint a dart under normal circumstances?

[@WorldwideDarts]

Nope. I have very rarely ever had to use it. I've repointed probably 100 sets of darts or so and only had to use glue twice that I recall.

[@boof29]

@@WorldwideDarts thanks. I’ve had a set of darts repointed once at a store in Syracuse way, way back in the day. They used a drop of glue. I watched another video from Neil’s darts and thought I saw no glue used. Figured I just missed it.

[@WorldwideDarts]

@@boof29 I'm an hour away from Syracuse 👍🏻

[@boof29]

@@WorldwideDarts I live just outside Albany now but grew up in Syracuse. If I ever throw darts outside my basement, maybe we’ll cross paths.

[@WorldwideDarts]

@@boof29 Well I just hope you discovered UK dart shops from some of my other videos. You said you were a noob so just remember... the price of darts has absolutely nothing to do with how "good" they are. The prices of darts at places like Darts Corner are incredibly affordable. If you want to know more about it have a read of this... www.howtomasterdarts.com/2018/03/darts-retail-in-us-savvy-business-model.html?m=1

[@Division26]

Couldn't you just freeze the point and heat the barrel? Thermal fitting.

[@MrKillahippo]

it just shows the weak design, needs to be on a solid stand like the bench vice, turn it into a one hand operation. a handle( moveable or not) at ether end will do.

[@Beelzeboss6666]

any idea how to change points without a repointing tool? ( i dont want to spent 40$ )

[@davidblalock1709]

Spend the money. Makes things a lot easier and less likely to mess it up.

[@WorldwideDarts]

Maybe Santa will bring you one? 🧐

[@Beelzeboss6666]

@@WorldwideDarts santa will already bring me the new harrows noble😅

[@paulmcerlean9267]

I’ve just bought one of these it great. I’ve put some 40mm points in my darts, it’s made a big difference to my game 👍🏻

[@zorankostur]

I'm sorry but I don't agree ... I have a repointed tool and I change points often and I never had a problem even though I keep it with the whole hand ... they are always great changed...but ty for tips

[@WorldwideDarts]

I'm sure a lot of people have never had an issue grabbing the entire repointing tool like that... but it's still the wrong way to do it.

[@shwaaank]

Have to agree, just make sure to line it up give at few turns without holding the middle section and you should be fine, holding the midle, repointed dozens of darts this way

[@zorankostur]

@@WorldwideDarts the wrong way,yes but i allway repoint them without issue

[@somakutassy4409]

Hi, I have a unicorn purist phase 2. Can this model change its tip? 🎯

[@WorldwideDarts]

Yes

[@brandonbeck9735]

Wish I had a repointer! I can’t find a deal on them or the points right now

[@WorldwideDarts]

Get the Designa Pro - Black at Darts Corner. Use the discount code newslettersignup to save an extra 10%. hell of a deal!

[@albertattwood8746]

There’s lots of vids on this. I’ve followed the best vid and never had a problem. Are people that thick .

[@WorldwideDarts]

There's one vid on this specific topic. This one.

[@bigrado1074]

I prefer not to buy a repointing tool, cuz my fav brand is target and a lot of their darts are sp, so its much easier with sp than doing it with repointing and risking my darts

[@WorldwideDarts]

After you break several points it would have covered the cost of a repointing tool

[@Camrographer]

So I'm planning to buy some darts from a dart shop. They happen to have a point replacement service which I want to use since I don't have the re-pointing tool. I noticed that in their disclosure they absolve themselves of responsibility should the dart barrel break during the process. A few thoughts come to mind. First, is that something I should be concerned about? Secondly, do dart manufacturers like Harrows warranty their products from failing under normal usage circumsta… See More

[@WorldwideDarts]

That sounds insane! If they break the dart while repointing then it's their fault and they should replace it. Is that from a US dart shop by chance?

[@Camrographer]

@@WorldwideDarts It is.

[@WorldwideDarts]

@@Camrographer I would already highly recommend you avoid. That's some sketchy stuff. Why not buy from Darts Corner? They have a repointing service and are probably WAY cheaper. Heck, the money you save at Darts Corner would probably be enough to buy a repointing tool.

[@Camrographer]

@@WorldwideDarts I'll check it out. any others you'd recommend if they don't have the dart/weight I want in stock?

[@WorldwideDarts]

@@Camrographer Darts Corner, A180 or Double Top Darts. Darts Corner has a discount code (facebookers) which saves 7% on most items. A180 has one as well (wazza180). What darts were you looking to get? Mostly everything is a lot cheaper from the UK except Shot darts. Those are priced similar no matter where you buy them

[@jeffknowles1857]

You should never use glue on your points it a no no

[@WorldwideDarts]

Says who? It's the only option when your points are loose.

[@drazenmustafic4497]

Im use soft tip darts with mission titanium points..easy every time

[@JohnEWierenga]

How many times can you repoint the same set? I've wondered if they would get progressively loser with every change?

[@WorldwideDarts]

I've repointed a couple sets multiple times. My One80 match darts have been repointed 3 times with no issues at all. If for some reason the hole loosens up you could always go the Loctite route.

[@norgeball3971]

Great video, thanks! I am thinking of getting my own repointing tool, my old RD Javelins do desperately need a new set of points and I was a bit afraid that I‘d ruin them as I‘ve never done that on my own before😅

[@WorldwideDarts]

Just practice up on an old set and you'll be fine. I have another 2 or 3 videos on repointing that might be worth a watch

[@norgeball3971]

@@WorldwideDarts Will do that! I still have an old set of brass darts lying around to try it on first. I will also certainly watch your other repointing vids. Thanks for the great content on the channel👍