The Most Useless Pedal (You Have Never Heard Of)

Is this the most useless effect pedal ever made? Lets check out the Boss EH-2 Enhancer!
Links:
Riffs, Beards & Gear On Patreon: / riffsandbeards
Merch: teespring.com/...
Facebook: / riffsandbeards
Amazon Store: www.amazon.com...
Instagram: / riffsandbeards
Ask.fm: ask.fm/RiffsAnd...
My Gear:
The Camera Body: amzn.to/2xCl3Qn
The Lens: amzn.to/2xEykbq
The Tripod: amzn.to/2hTrudP
The Shotgun Mic: amzn.to/2hJ0iKX
Or This Mic: amzn.to/2XBZI9k
*All links to Amazon are Affiliate Links. *

[@RiffsAndBeards]

I wOndEr wHeN fLUfF wILl lEaRn wHaT a ClEAn tOnE iS

[@garfunky8174]

Lmao

[@ScutMonkey]

Hopefully never you magnificent beast.

[@JoshRiffMonster]

*spongebob making chicken noises*

[@guydude6546]

yeah screw the guys trying to give legitimate criticism and feedback, that's just dumb of them

[@MikeLee-lg5vq]

I can't believe you would dare to have a less clean clean tone than me! My clean tone has precisely the correct percentage of harmonic distortion!

[@drittal]

Perfect for me because I’m the most useless guitarist you have never heard of!

[@SgtPnkks]

are you me?

[@fabianvanderelst9643]

Ouch, that hit hard home. 😂

[@bradfuerst]

Same, bro. Same.

[@bainmack]

hahaa

[@joshjacobus4641]

drittal if u wanna feel better about yer self than watch my 1 and only KZbin video it fucken sucks I suck I garuntee you are 100 times better than me

[@WingmanStudios]

1) The pedal doesn't do "nothing". The Boss Enhancer pedal is a unity gain modulator that duplicates the input signal and routes it through a second order High Pass filter which is envelope-controlled, then mixes it back into the output. This allows treble frequencies to be boosted without raising the noise floor or introducing hiss into your sound. It can also cut treble frequencies by use of the inversion knob. 2) All knobs at 12 o'clock has no effect on your sound. You must change at least one of the knobs to alter your sound. 3) The pedal as a whole acts as a shelf cutoff for frequencies above the selected range. It equalizes the output of all frequencies above the threshold selected, making them a unity gain monolith. 3.1) The Frequency knob in the 12 o'clock position sets the shelf cutoff for about 2000 Hz. At full clockwise position, it is set for about 5000 Hz, and at full counterclockwise it's about 1500 Hz. 4) The primary use of the pedal is for solos where you want specific frequencies to be boosted above the rest of the mix (drums, keyboards, etc) without introducing hiss or gain. 5) The Inversion side of the Mix knob blends in out-of-phase treble, which cancels out the clean treble, bringing the overall treble frequencies down. As you crank it counter-clockwise, it overpowers the clean signal and the phase cancellation goes away, and it does about the same thing as mixing in the non-inverted high-passed signal. The inversion knob essentially inverts all frequencies beyond the shelf as either a unity boost or a cut. 6) The Enhancer pedal is best used as the final effects pedal in a chain before Reverb or Delay pedals. Do not use this pedal before distortion or any other modulation pedal. If you also have an EQ pedal, place this after the EQ, not before. I hope that helps.

[@alexisramirez79]

So, as I understand, it helps to get that lead tone we can hear on late 80's pop rock songs, that is like contained on some specific frequencies, isn't it?

[@loukabarone]

THANK YOU. Can't tell how many people I've seen saying it does nothing but putting it before all of the gain. Hear it after the distortions and modulations, then you'll know what it does

[@WingmanStudios]

@Ari Parker You're a dumbass.

[@squirelova1815]

"Clap you stupid bastards!" - (J. Biden meets the Troops)

[@helgepopanz598]

way to complicated for Fluff. sadly the pedal doesnt multiplay braincells

[@buffalothebison4850]

Fluff: "as clean as possible" Fractal Audio: "am I a joke to you?"

[@kiillabytez]

Everyone else: Yes.

[@NicuMihai]

this is basically a set of new strings in a pedal

[@UsTheMusicTVOfficial]

So true! Haha, very good description!

[@randymiles904]

That's a damn good way to put it. Subtle but noticable.

[@michaelgrahamwongacutemadness]

good for pure nickel strings or anything that sounds the same throughout its life

[@hommedammn7132]

As clean as a crust punk guitarist who’s been awake for 72 hours.

[@rottingemptiness]

LOL

[@oisinmcphillips2090]

Fluff seems to have the same problem as Rob Chapman when it comes to clean guitar sounds. 3:20 is apparently "As clean as possible"

[@haralabospap7091]

This tone is more dirty than a hooker who hasn't bath for a week

[@ryanlusby569]

Clean is relative you muppet 😂😂😂😂

[@willmidgley6681]

@@ryanlusby569 how is clean relative 😂😂 its not as dirty, but it's still dirty, so it's not clean is it 😂

[@famigeratox2277]

I think you cant get the "clean" tone you have in your head with those pickups, with something like a tele the sound would have been alot cleaner. I really like that clean / not clean sound btw.

[@willmidgley6681]

@@famigeratox2277 tbh he's talking about the pedal, not the guitar, so he should change guitar

[@markhammer643]

Enhancer/exciter pedals are poorly understood by the guitar community; almost as poorly as compressors. Your first mistake is using it with humbucker pickups. Bad idea. This category of pedals needs to have lots of top end in the input signal, and feed a speaker system that is also capable of providing top end, rather than the tradition 6khz rolloff of a 12" guitar speaker. Keep in mind that the category of effect is derived from the original Aphex Aural Exciter. That unit was found on countless recordings in the early 1980s, and was characteristically applied to acoustic guitars, whose strings would sound newer than new when "Aphexed". I imagine it would sound great when enhancing a Nile Rogers single-coil rhythm guitar, feeding the board. And I imagine that when musicians plugged a Les Paul into one, and auditioned it through a Marshall stack, their usual response was "Is this thing even on? I'm not hearing any difference between effect and bypass." Good pedal but neither musicians nor music store staff understood it well enough to recognize who and what it was for.

[@matevizhanyo7604]

Thank you, useful and great comment!

[@chaosvariant]

That's exactly what I use it for, it sounds killer on a strat for funk and disco. I even use it for clean emo parts.

[@MatthewHyatt]

You nailed it. I personally love this pedal on my Jazzmaster with super thick chorus.

[@dagus834]

In addition, he's running a Baritone guitar into it which is going to have even a lower high frequency shelf, then he turns the 'Freq' knob all the way up so it's boosting far above the range his guitar can put out.

[@neonether]

It's not necessarily a bad idea. All enhancers basically take the upper harmonic content from a source and mix it back into the fundamental tone in some way. Hence, there only needs to be some baseline higher frequency harmonics present. Depending on the specific functions of this enhancer, how much content is added back may also be dependent on the line level of the audio source. Vocals, bass, drums, other acoustic instruments are audio sources that have more apparent benefit from enhancers, moreso than electric guitars at least. Especially for a genre like metal. So yeah, if you wanna demo this pedal, use something other than an electric guitar...

[@jonathanwapner6262]

This demo is completely missing the point. It's most useful at the end of a long pedal chain that incorporates distortion going into a clean amp. It decompresses the gain a bit and replaces the lost tone.

[@theatremusician]

exactly correct

[@EpicStuffMan1000]

or......... use a buffer?

[@dam7ri]

Thank you for point out what should have been obvious. After a distortion pedal, particularly one that gets very muddy, it adds definition to the pick attack and gets the low-end to play nice with the rest of the frequency range without having to cut it. I can't play a Proco Rat or a Metal Zone without one of these "useless" pedals. I could use a Death Metal pedal without one, but why would I want to?

[@jonathanwapner6262]

@@EpicStuffMan1000 A buffer boosts signal. It doesn't enhance the quality of lost/reduced frequencies.

[@renanterezan9922]

@@jonathanwapner6262 The buffer not only boosts the signal, it also changes the impedance, preventing signal loss

[@dominicsinicrope2795]

Title says most useless pedal ever and I still thought, yeah I’ll waste 8 minutes watching it

[@gonzalosanchez6387]

We are all with you... Just killing brain cells and waiting for death

[@dam7ri]

I watched because I actually find the EH-2 to be very useful at making muddy distortion pedals come alive.

[@alexdattel2757]

I wonder when Fluff will learn what a "clean" tone actually is.

[@solomonramsa]

Hey man, there's someone making a joke of you

[@niclastname]

Uhhhh I think there's something wrong with your guitar or signal chain if that's "as clean as possible"... lol ;D

[@mr.phil.a]

I get a lot of spam for enhancers...

[@mr.phil.a]

@WORST CHANNEL EVER And maybe my name is not even Phil.

[@jonniegibbins]

@@mr.phil.a Mom? Is that you? ;-)

[@mr.phil.a]

@@jonniegibbins Shhh don't tell ya Dad

[@DTO-rq2gv]

Last time I was this early, the pedal was from WISH.

[@STKMY94]

Dude. I could hear the difference with my phone speaker 🤦‍♀️

[@liamtahaney713]

Yup same. Clear as day

[@ck2music712]

I couldn't... Lol...

[@mr.banana4893]

It's meant to go after distortion. It was their version of exciter. Amazing in the loop of great amp. It's not useless, you just don't know how to use it.

[@ledooni]

I think it actually sounds pretty good and makes the signal just clearer and more brilliant but without making it more harsh. But no need for that if you have an Axe FX-3 😄

[@ssssssssedb]

DUDE its not even a *tiny* bit subtle, when its set to boost the highs, it LITERALLY DOES THAT very audibly, and you just acted like it was nothing?

[@darktempest53]

People's ears are different. I guess he can't hear highs as well

[@fortheloveofnoise]

It was still waaaaay more subtle than an EQ. It is useless compared to an EQ pedal.

[@mr.banana4893]

This pedal works best in a loop, or at the end of a chain of pedals. Most notably after distortion not before. When used in a loop the effect is actually strong. I don't think you where using it properly, Fluff. It's much like the BBE sonic stomp or the Aphex exciter pedal. I use the Aphex exciter, it has the most control over your sound. Exciters do something to your sound that no EQ can. Especially a high gain tone. But even blues tone as well, or a shimmering clean sound with chorus. They track down frequencies that aren't part of the sound in the first place and introduce them into your tone. Gear like this is end of the signal chain and always on. I think they made them into pedals to introduce them to different people, or attract different buyers. It's not a useless pedal, you were using it completely wrong. Then you disregard it. You must do a retake on this. Put it in a loop or after a distortion pedal and demonstrate it properly. You owe it to your viewers, who many probably think it's crap and useless, and that all pedals like this are crap. This may be the solution they were looking for.

[@mr.banana4893]

@@lincolnbuck , I totally agree with you. Unfortunately many people hang on every word these KZbinrs say. I've been playing guitar for 35 years. In and out of bands, my brother is a recording engineer, I've done session work, I own and tried tons of gear over the years. Plus I'm a total pedal junkie, from $35 pedals all the way up to $500 boutique tube distortion. I love them all equally, and they all have their own mojo, regardless of price. There's no such thing as bad gear just uninformed musicians. And all of the KZbinrs have done that at some point or another. EytchPe42 is the worst. Dude has $100000 worth of gear 30 amp heads. Plugs in a pedal, can't get a decent sound, trashes the gear, makes a bunch of jokes and video over. You'd think with all that gear he'd have a smashing tone. Example , watch his review on the Hughes & Kettner Black Spirit. Made it look like shit, and all the comments were on how bad it sounds. Then watch Rabea Massad review the same amp and the tones he achieved...omg, he made it sound like the greatest amp ever. Wooooow. For every one who trashes Boss DS1... I have only one thing to say. Smells like Teen Spirit. Same pedal. What a wall of crushing tone. 'Nuff said.

[@andymastojira1963]

You took the words right from me. Definitely run this in the loop.

[@rottingemptiness]

About EytchPe42 , I'm gonna check it out , I never heard of him before , so …. Rabea Massad , yes , he's a well-known guitarplayer from Dorje , youtube andertons , .... !!!! BOSS DS1 , I bought that one in 1990 , but I sold it in 1991 , because I didn't like !!!! Instead I bought a cheap one from Aria , Aria Ultra Metal AUM-1 , it was ok !!!! Last year , don't ask me why , I bought another DS-1 , but I still don't like it !!!! My favorite , Nobels ODR-1

[@rottingemptiness]

I just googled on EytchPe42 , result: ZERO !!!!

[@mr.banana4893]

@@rottingemptiness he recently changed his KZbin to 42street gear.

[@matturner6890]

Dang, Fluff, you must've lost a lot of hi-end in your hearing. It's not subtle at all to my ear, it adds a LOT of boost to the 8k+ range. I think people should give you a break on the clean tone tho. For me, clean has always just meant when the distortion pedal is off.

[@noname-ng6sj]

Yeah. I have lost a lot of high-end in my hearing and I definitely have an issue around 8-10k, yet I hear the change as clear as day. I honestly have no idea how he doesn't unless he means "this doesn't do a lot" when he says "it's SO SUBTLE". It does sound like an aphex enhancer going on and off.

[@NoCoverCharge]

Like a bbe Sonic maximizer... I use the acoustic maximizer on my acoustic pedal board ... It's basically a DI and preamp for the acoustic... Sounds great

[@PooNinja]

Enhance...(types on keyboard)...Enhance...(types on keyboard)...Enhance...(types on keyboard)...buys a BBE 👍🏽

[@dam7ri]

I own both an EH-2 and some BBE products, and both work well. I have found that a BBE in the FX loop of a high gain amp will yield similar results as putting an EH-2 right after a high gain pedal into a clean tone (read as: not what was displayed as a "clean" tone in this video).

[@PooNinja]

👍🏽

[@Skwirl719]

When the EH-2 was introduced in 1990, it was presented as a pedal that could bring out detail that could bring out detail and clarity in the signal that can get lost after a lot of signal processing. If you consider the types of effects and processors available at the time, especially just before the big resurgence of vintage and retro-style gear just a few years away, it made sense. The EH-2 was introduced at the same time as the PN-2 and OS-2. There was even a half-rack model (EH-50) soon after. In the right setup and conditions, the EH-2 really is actually great, but it's such a subtle effect that it's more noticeable when it's switched off.

[@tater7363]

This goes at the end of the signal chain RIGHT BEFORE THE AMP. I have two of these and two GE-7 EQs. One EH-2/GE-7 combo goes right before my STEREO L amp and the other EH-2/GE-7 combo goes right before my Stereo R amp. Trained ears will hear the difference. Especially during playback of two identical recordings with the exception of one being recorded WITH the EH-2 and one WITHOUT it. It is here that the tonal qualities are remarkably different upon comparison. I consider these more of a studio tool but can be used to subtley brighten your overall guitar tone during a live performance.

[@atlantaguitar9689]

Yea, humans don't notice much difference but my German Shepherd grooves out to it.

[@gcvrsa]

The EH-2 was an essential part of my rig in the 1990s. It's essentially a pedal version of an Aphex Aural Exciter, and the effect is more or less than of a treble booster. It's not subtle at all in "Inverse" mode, especially if you put it after an overdrive or distortion pedal.

[@HellsSaints]

SUPER USEFUL. I've thought about this for the past week, and I think the most creative use case is to put it on one side of a stereo guitar signal. You'd get pick-sensitive phasing that might sound delectable through an amp like a Jazz Chorus.

[@MuscleDad420]

That is actually a truly, honestly clean tone by Fluff standards

[@cabbycabby1770]

Lol... clean tone. What the heck? Also, you made a weird face like “see nothin” when you turned it on. But it CLEARLY made a difference. Time for an ENT check up, man.

[@davidhollowelljr949]

As a concept this does sound solid for bass. If, for example, you tend to go from finger picking to slapping and back, or something

[@ufosigma]

I found it in a pawn shop; its essential now. The reason why you THINK that its useless, is that you did not run it through a pedal chain. You made the number one mistake which is to plug the guitar into the pedal, then the amp. you should run it through 5 or 6 pedals and see the difference. It takes a muddy signal and turns it bright, allowing it to cut through the mix. It sounds great with overdrive as well. For people who dont want to mess with an eq, or just like the novelty of this semi-rare pedal, its a fun little pedal.

[@KRAZEEIZATION]

It’s far from useless. It’s a very subtle effect. It comes into its own when recording. Play it with headphones for 10 minutes, then turn it off, you will miss it trust me! I found a NOS unit boxed and mint for €40 and a used MZ-2 Digital Metalizer for €35 in the same shop back in 2010.

[@danielsalcido3467]

Thanks for posting this! I used this pedal in the past and it worked best - and most noticeable for me - running pedals into a clean amp (after distortion/ at the end of a pedal chain).

[@lewisdeakin5018]

I have one of these. Because i use single coil and humbucker pickups, so i use the pedal to add some more twang to the humbucker so that the guitars don't sound so massively different.

[@matt926uk1]

lewis deakin humbuckers and single coils are supposed to sound different

[@RadioFW]

Why do you have a single coil and humbucker guitar if you want them to sound similar?

[@jeffh1276]

@@RadioFW 😆

[@joemanganese]

Clean tone? What's a clean tone? What's an overdriven sound? What's an enhancer? Why do I review pedals?

[@bradleestone5344]

I really enjoy watching videos that don't make me want to buy anything 😀

[@wbertie2604]

The difference is definitely audible if you set the frequency right. If you crank the frequency all the way up there's not a lot coming off the typical guitar pickup for it to be doing anything with, though. It's not night-and-day, though. I used to use the Korg implementation of an enhancer on bass all the time in the 90s when trebly tone with chorus was still 'the thing'. Haven't used one since except plugins when mixing - works great on 12 string guitars or mandolins if you want to get one to 'pop out' in a mix.

[@matz1011]

I think this could be awesome for solid state amps with guitars

[@carvinblack]

I bought one around '93. Musicians Friend had a blowout at 30 bucks. It is very subtle, but VERY noticable when you dont have it on. It's almost like having you tone knob of your guitar on 0. But when it is on, your tone knob on 10. Adds clarity when using alot of pedals. I used it to clean up my sound when I had a solid State amp. Left my pedal board when I got a tube amp. For some reason wasnt needed.

[@iamthejshep]

this is a great pedal for guys who play a lot of modern worship or pop music. It can give a humbucker equipped guitar that filtertron-esque bite and give your amp just that extra bit of cut.

[@darwinsaye]

Not sure why everyone is bitching about your clean tone. I have seen (and then turned off) so many videos where they say "here's my clean tone", and then play with a full-on AC/DC crunch. You tone was clean enough. As far as the pedal goes. I could hear a distinct difference, and I liked it, but I'm one of those rebels who has a Sonic Maximizer pedal as an always-on pedal for my home practice setup. It does wonders for improving the sound of smaller amps and lower volume situations.

[@caylehunter]

Dare you to take a shot every time Fluff starts a sentence with the word “now”!

[@rjc7289]

I had an EH-2 years ago. I quickly got rid of it after realizing the effect was too subtle to the point of being almost non-existent.

[@DerSilvano]

This video was the birth of the Clean Tone Mafia

[@gregrush8237]

I've used the bass version and thought it worked well. BBE version is more noticeable and it equally works just as well on bass and guitar.

[@ryanliao2131]

more “remembering the 90s” plz！

[@supersonicnomad8437]

Yes plz & ty.

[@woosix7735]

Normal people: I don’t hear much of a difference at all Audio Engineers: This difference is very obvious

[@majikpillzburyrey637]

I can see it being used in some applications but, nothing that I would throw on my board. Thanks for the vid bro.

[@jaketanis3069]

I just did a video on my channel for one of these. I sold it on Reverb directly after. I was all excited that Fluff bought my pedal, except mine was beat up way more lol

[@JodyParsons]

I used to use this to get really sparkly cleans with a strat middle/neck pickup. I trade it, a DOD gate/loop, and an old Tokai flanger for a reissue gonkulator

[@karlmontenegro]

If you use it as a buffer section in your pedalboard, then it stops being useless ;)

[@victorramsey5575]

You missed the point dude. Us Boss nerds want every color Boss has to offer. My pedalboard looks like Crusty The Clown threw up a bag of skittles while eating some 7-11 nachos at 3am on a cocaine binge.

[@lolkom77]

Exciter, I love to use it in the end or after the distortion and chorus pedal. It makes the pinch harmonics sound clear and aggressive, specially when I tune down the low E string to D or. I think there is no useless pedals or effects, it only depends on what kind of music or style of playing.

[@jakestewartmusic]

It sounds like slightly more fresh strings or perhaps the removal of the tone pot from the signal.

[@DreidMusicalX]

I once read something on this awhile back and they were saying something about it being used during recordings to control the signal chains better? If I ever come across it again I'll post the link.

[@fender1331]

I use the boss bass enhancer on my bass rig.. Its my always on pedal.. Its almost like a compressor and it really roundsout my bass tome and keeps it punchy.. As for guitar i never tried one..

[@too--late]

I can't wait for the release of the Waza Craft edition ! ♫♪♫.

[@lastreagandemocrat]

Domo!

[@dannymoreno7835]

Got one years ago and I thought it didn't do anything ............. until I plugged into the effects loop! Then it was awesome!!

[@2charliegotguns2]

I remember seeing one of these in a music shop in Barcelona back in '09, it was super dusty and faded.

[@alanthorne3921]

Nice light green colour.Matches the colour of my Strat.Have to get one.

[@Tweek5470]

As a bassist, the lmb-3 was one of the best pedals I owned. It tamed the boominess of my tone and evened out the levels so that my signal was clean and consistent. Nowadays I don't really need it as a crutch anymore though as I have everything dialed in on my ax8.

[@ItsJustEmK]

Didn't know this pedal even existed! It does look like a cousin of the LMB-3 but as a bass player who's been using the LMB-3 for years, it seems *very* different. The LMB-3 has basic compression/limiting and its "enhance" feature is very pronounced; it makes clean bass sound snappier and dirty bass cuts a lot more. If you turn it up too much, you lose some low mids but get a cutting guitar-like tone that might be useful for little fills or breaks. It's a fairly different animal.

[@BirdNoise77]

Clean tone mafia strikes again

[@MisterRorschach90]

You should gut this thing and put the control board inside of a broken pultec rack unit with all the knobs and switches working somehow, and then pass it around to people to try out a “pultec”.

[@Lilrockerdude13]

Even on a phone speaker I could hear just that hint of top flavor but as you put it this is one of the most useless pedals ever!

[@mrshelley87]

So subtle you'll think it's broken

[@Gitfiddle]

He’s not being very subtle about how subtle this guitar pedal is. I get it. It’s fucking subtle.

[@Patrick-857]

Fairly sure it's an exciter, meaning it's not just boosting the highs it's adding new harmonics too. Subtle high end saturation.

[@Liko81DJ]

I think the DOD Psycho Acoustic Processor takes this cake, personally. But the Boss Enhancer comes really close.

[@davidlynch4338]

Think of it as an envelope filter for a really narrow frequency band. It is sensitive to your pick attack and can attenuate or boost the frequency (very narrow band) you choose. It is great as a buffer at the end of your chain to fix tone suck or to pull out a nasty frequency from your guitar pedal chain combo.

[@MsSimonsunburst]

Put this at the end of your chain. Clears it up. I've used mine for years. When you switch it off, you notice. 😎

[@danedgar1539]

Yeah you kind of nailed it when you said its a bit of a presence knob boost in a box, which is sort of handy i guess? I used it in a 90s cover band for a dirty to cleaner lead passage in ONE freaking song! It did recover a bit of lost clarity at the end of my pedal chain but didn't talk well to my overdrive pedals that were tube driven, bit too pinchy sounding.

[@samuelnicolay6460]

This pedal is meant to compensate the loss of tone induced by a long buffered pedal chain, which is obviously not the case here.

[@robbievalentine8239]

When you lower your guitars volume.knob, you will.notice a drop in high end. This pedal will add "sparkle" or presence as you roll back or play softer

[@umasoundil9608]

I didn't click "dislike", but I wouldn't call it "useless". The bass LMB3 pedal has an "Enhance" knob and it is VERY effective, especially in heavily-compressed situations when you have just one amp and no frequency splitter or EQ pedals. It brings back the high frequencies over the squashed signal, and kinda gets "that round rubbery metal tone" (you'll know what I mean when you hear it). I could hear some similarities on this guitar video, but it sounded more like a half baked MXR dynacomp combined with a high frequency boost. Still ok in my opinion, and not useless at all. BOSS - SEND ME FREE STUFF! :)

[@dinosaurinatarpit7394]

For about $80-$100, you can get a rackmount BBE 482i Sonic Maximizer in very good condition. It's the same concept as this, and has control for both high and low frequencies. Plus, the effect has more range and character.

[@instaman34]

My buddy apparently used this because his fender mustang champion amp had a bad humming sound and I guess it suppressed the noise

[@Octopus502]

This would be interesting after a distortion pedal or maybe in the loop of the amp.

[@joachimekstrom]

It doesn't do anything, but it works great!

[@HANGINWITHTHEDREAMER]

Thank you so very much fluff

[@olfox1694]

Remember the Nothingizer pedal meme? You found the real deal

[@griffgoldsteinreference]

I wouldn’t call it completely useless, but I don’t think it’s something that I’d use a shit ton. Maybe for for adding a little extra high gain to my axe for specific genres but that’s about it. I’ll admit I’m a sucker for its bright turquoise coloring though.

[@shawnmiles4049]

I have one of these that was left at my house years ago. I think it may actually do something for me. Gonna did it out this weekend.

[@kongandbasses8732]

This pedal is the "Lee Sklar Producer Switch" for guitarists.

[@stevennemeth6256]

As a single pedal, quite useless. In a signal chain brightening up the distortion and effects allowing the top end to shimmer and shine as it was intended to be used (much like a BBE Sonic Maximizer)...probably quite useful.

[@UsTheMusicTVOfficial]

Idk, seems alright? I would much rather go with the BBE Sonic Maximizer personally. Or maybe just more suitable for a bass?

[@JimijaymesProductions]

The BOSS Bass Limiter Enhancer is kinda cool, it can actually do a cool kind of thing adding a bit of zing to a more dull sound on guitar (the bass comp) as it can add back the high end that a comp takes away. Once you put the frequency about half way I thought it did a nice thing for the tone, almost more single coil like, extra chime, that I dont think more treble could do.

[@scramblesthedeathdealer]

I have one of these, not sure what it actually does, but it sounds good on cleans 👍

[@klepetar]

it's a hamonic multiplier.. it changes the responce of your amp .. it's like changing your ceramic speaker's response to an alnico speaker..

[@chrisact9601]

The advantage of an enhancer over a straight HF EQ is that it's dynamic so it's not boosting unless you're playing which means that there's no extra noise when you're not playing.

[@hotdogwater7037]

this comments section is hilarious! im paraphrasing here- "you have to run it through the fx loop, 3rd position of a 7-pedal chain on non-consecutive sundays after a full moon, with reverse wound p90s wired out of phase, then polarity reversed, and alchemied to turn into a crunchy rails noiseless humbucker, then this thing sounds awesome. you just don't know how to use it, man"

[@caffeinechaos1334]

Seems like a great pedal to de-baritone a baritone if needed.

[@nazderinkalyoncu1297]

WHAT IT DOES, POLISHING UP THE HIGHS AND ALSO BOOSTING THE MIDS A LITTLE...IT ALSO HAS A BASS GUITAR VERSION...DEFINITLY NOT " A MUST HAVE " BUT OVERALL, IT'S A BOSS PEDAL...

[@LeStraTele]

That wasn't much of a demo. What about a more distorted tone? How does it sound before or after distortion pedals. This pedal was created to clean up the tone in long pedal chains. I think you should give it another go with that in mind.

[@earlycuyler2295]

Id say "subtle" not "useless".i think you just wanted it to do something it cant. Its not a compressor, or a noise gate. Its more of an "expander". It "opens up" tone thats been compressed.kinda like an active "presence" knob on an amp just a little more tweakable. personally its kinda a waste on a guitar with ANY DRIVE whatsoever as this is just gonna re-squish your signal once it hits the amp. But for ULTRA CLEAN jazz stuff or bass it shines.

[@jacobbockover1628]

I have heard those are best in the loop. Maybe it would be useful in an p with no presence control

[@joshuaperez-rios7452]

The fact that so many people can’t tell that he’s trolling them with the whole “clean tone” thing is hilarious

[@isaacandhismusic1153]

If 29 Pedals made this, it’d be on Mayers board and it’d cost $500

[@xbreathingisirrelevantx]

I mean, to your credit that was the cleanest clean tone you've had to my memory

[@assnut1000]

bough one of these couple years ago decent condition with box and paperwork...still haven't found a use for it.