The Mustang Hellion Twin Turbo Kit is Done.. First Start.. OMG!! (Part 2 of 2)

Here is the second installment of the Hellion Twin Turbo Sleeper Kit Install. The kit is now complete and all I can say is wow! What do you think of this setup? Would you do this to your Mustang?
Special Thanks to:
Hellion Power Systems
[phone]
www.hellionpowersystems.com/
Gearheads Performance
7557 Rendon Bloodworth Rd.
Mansfield, TX 76001
[phone]
Instagram - #XCESIV_HELLCAT
pCEc0d_zFY...
Don't forget to Like, Subscribe, and Share - RacerX
Shot on the IPhone XR
Thank you for your support on the channel

[@theboringchan]

This is my dream setup. 💯🇺🇸 I recently was layed off. I've had my 20 GT for less than a year. Hopefully il get a good replacement job to pay the bills so I can keep mine. I've always wanted a turbo setup. The Hellion was what I was wanting. Yes superchargers are cool but u can't feel the boost build. My bros hellcat just feels like it has a powerful engine except the belt whine. I want a turbo so I can feel the boost build and hear it as well. I'm living my dream through u my KZbin friend. I thought the AMERICAN Muscle channel said this was a bolt on kit. I didn't realize it required so many modifications. I'm glad I didn't just order the kit to do myself.

[@RacerX9]

It’s an amazing kit but definitely requires a fair amount of work to install .. it sounds absolutely insane though .. wow

[@treysolo8726]

Oooooh can't wait to see this things new content. Its gonna be Naaaaasssty, congratulations again my friend

[@RacerX9]

Thanks buddy.. should be a wild ride

[@wesd2845]

@RacerX it looks like a great build. When I went to the hellion website it offers many upgrades to the kit including upgraded turbos, injectors, fuel system etc. It would be great if you could detail what upgrades you selected in the kit and what was the total cost of the kit and also the labor cost. Thanks.

[@SovereignKnight74]

I'm "Hella" excited for you Racer X! Cant wait to see how she moves! 🤜💥

[@RacerX9]

Thanks buddy.. it should be alot of fun

[@louiexiii91]

That's bad ass man! Big goals.. Excited to see all the content you're gonna be dishing out with that beast!

[@RacerX9]

For sure buddy.. its going to be fun

[@davidhannan2911]

That is an awesome build. Hellion did a heck of a job on designing the kit and Gear Heads did an excellent job on the install. 👍 I look forward to seeing more of the Mustang

[@RacerX9]

For sure buddy.. fully agree. Lots more to come

[@pres10hk51]

So excited for you brotha. Crazy where it’s at now, compared to when we were talking about it in the works

[@RacerX9]

absolutely buddy.. it nice to see the kit on the car. Hope you are doing well

[@Stratted843]

I was never really into the sleeper kit look but the way they designed it is pretty amazing. Can’t wait to see what she puts down! 🔥🔥🔥

[@RacerX9]

Me too brother .. stay tuned

[@Mark-cf5od]

Can't wait for the rest of the story to play out. I've been waiting for this moment since you bought the car and I am so excited.

[@mikepoint4983]

Maaaan that sounds so good , I can’t wait to see the Dyno numbers . Cheers

[@RacerX9]

For sure Mike.. me too brother

[@markr.9626]

Brother, you have convinced me to go with Turbos. That genuine look of being on a rollercoaster is why we buy these cars. Smooth consistent cool power seems to be the best (Porshe power bands???). I love the ability to change HP on the fly and take on any beast on the road. Great video brother!

[@athanatos9648]

Excited to see what it puts down!! Keep it coming 👍💪

[@RacerX9]

Thanks buddy.. coming soon

[@hectormedina6705]

That's gonna be a bad ass mustang when its done. I love the kit. Definitely a good choice going with the sleeper kit. Sounds amazing

[@RacerX9]

Thanks buddy .. looking forward to seeing what it will do

[@robertbrathwaite8173]

The new monster is set. Thank you sir.. you didn't let me down.

[@RacerX9]

For sure.. this should be alot of fun

[@greganderson1989]

It’s looking good. Man it is a tight fit. Sounds good. Be safe.

[@RacerX9]

For sure buddy.. waiting to dyno the car soon

[@paulhudgins5120]

Heck yeah, waiting to see when to double TT sleeper Mustang GT was getting done, man she sounds sweet Racer X, can't wait to see what numbers this beast put down on the dyno. Hugh shout to Matt & Gears Heads for the awesome job they do.

[@RacerX9]

For sure brother .. I'm right there with ya. They did a great job. Hopefully I can get it on the dyno soon

[@daveharris1402]

Gonna be a beast!!! Congrats.

[@RacerX9]

Thanks buddy

[@sergebasque8460]

I like the intro from the turbo Whine at the start of your video. The kit is tuck under the mustang nice.👍😎👏💪✌️🇨🇦

[@RacerX9]

Thanks buddy.. it definitely does 👍

[@williamyoung5001]

Sounds sick!!!! Have fun with it👍🏾

[@RacerX9]

Thanks buddy.. I hope to

[@jayfurtado3679]

Can't wait.. congrats.

[@skidz754]

That’s awesome! Can’t wait to see some footage of you breaking it in! 👊😎

[@RacerX9]

For sure buddy.. coming soon

[@garyfuller7851]

Awesome! Can’t wait to see how much power that Pony puts out!

[@RacerX9]

Me too Gary

[@tylerwinter7712]

Niceeeeee! Can’t wait to see the numbers

[@RacerX9]

Me too brother

[@DanSmith-ux7ni]

Looking forward to seeing the next episode..

[@RacerX9]

For sure buddy.. stay tuned

[@travisa3323]

YESSSSSS!! Im ready, Let's go!!!

[@RacerX9]

for sure.....

[@thullraven1]

One Mustang Guy to a brother Mustang Owner. Well done Sir. I don't have the inclination to do all that, so I will enjoy seeing what you did when you take to the streets and track with it. :)

[@irvintuckeriii884]

Can't wait to see what's the difference in performance between the mustang and the hellcat. Great videos as always

[@waltscrossfiresrt6]

Knowing racer x the mustang will be faster it's definitely lighter and easier to mod

[@RacerX9]

I think the hellcat will be faster in the 60 foot for sure.. the Mustang will MPH faster though ..

[@MikeShelby67]

Sounds awesome RacerX!

[@RacerX9]

Thank you Mike

[@eligrundell9218]

Great video! My dad is a huge fan!!!

[@RacerX9]

Much appreciated 👍

[@taviusjoe5701]

Been patiently watching Racer X and RT Life with their twin turbo builds. Can't wait to see the end result! 🤯

[@RacerX9]

I appreciate the support my friend.. should be fun for sure

[@johnrambo2876]

Sorry for your loss! This was a beauty😔

[@elcomandante5160]

Can't wait for the upcoming content!!!!!

[@RacerX9]

Lots of great stuff coming up..

[@UR_AL_SHOOK_UP_21]

Great video bro

[@RacerX9]

Thanks buddy

[@Roustermiller]

This going to be monster

[@RacerX9]

It should be alot of fun for sure

[@Roustermiller]

@@RacerX9 you got everyone’s attention now

[@chrish8487]

Sweet upgrade. I've always been a fan of sleeper cars 😄

[@RacerX9]

It looks unassuming until you get underneath it lol

[@srtbone783]

Cant wait to see how much power it makes!

[@RacerX9]

I'm right there with ya buddy

[@Edsrt-]

That actually all went pretty quickly👍👍👍👍👍💸💸💸

[@RacerX9]

Yes they got it knocked out in about a week

[@carguy...]

Wow you finally have a fast car!!!!!

[@Shelby_Moe5.2]

Racer X, that’s crazy I just posted on the S550 mustang forums page on Facebook asking if I should do the Hellion TT set up or the Roush 2650 set up! Thanks for the video

[@RacerX9]

Hopefully this helps 👍

[@TruckerSaLer]

That's awesome that it is done can't wait to see the beast going down the road. Yeah on them 235s would be like a an elephant on ice skates every where you went lol.

[@RacerX9]

LOL exactly right.. working on that now

[@TruckerSaLer]

@@RacerX9 oh I know you got it taking care of brother. But until you do just be safe

[@chadpittman7826]

Can't wait buddy 👍💪

[@RacerX9]

I'm with ya brother

[@bobbywilliams1755]

Can't wait

[@j.vosier6786]

Wow i got a gearheads performance shop down the street from me in florida, might have them twin turbo my scatpack😎

[@RacerX9]

I don’t believe they are affiliated .. but Hellion makes an awesome TT kit for the Scatpack

[@chazceena7594]

Awesome!

[@lewisshepard9239]

I may have missed it, but I’d be interested to know,when it’s all said and done. How much it would cost for kit,installation,the whole nine yards.

[@davidhubbard7573]

HAHAHAHAHAHA if you have to ask you can't afford it

[@lewisshepard9239]

@@davidhubbard7573 you may be right, but I’m sure a lot of people would be interested.

[@lbcguy8723]

@@davidhubbard7573 Thats pretty fucking stupid

[@dychejs]

I probably can’t afford it either but Lewis asks a fair question.

[@lewisshepard9239]

I appreciate that Jeff, but it must have been out a line,because I didn’t get a response. lol.

[@leonardrice2830]

Fantastic!😃 Interesting indeed!🧐

[@RacerX9]

Thank you my friend

[@joem7023]

I was thinking turbo route for my 5.0 but I'll be happy with a conservative Whipple

[@Rafaahh]

Can’t wait to see the 60-130 in this thing

[@salimfaysal6651]

Good 1 💪

[@shanecoleman5617]

I want to do this to my 392 hemi with new drop in pistons and rods... This would be awesome on the 392 with the twin turbo Helion... Considering it for sure!

[@jayeortiz8671]

Pumped up for the next video!

[@RacerX9]

Coming soon buddy ..

[@ben_coyote2623]

Nice Intro, nice Monster. With this tires it’s Booty Shakes all the time 😂

[@RacerX9]

Haha for sure.. she will be shakin it like a salt shaker

[@ardennielsen3761]

Have a similar thing going on with a 1994 ford thunder bird, but its so tight that I figured to mount them under the rear seat where the gas tank was... really hard to fit charge pipe over 2-2.5 inch without lifting the motor to install the pipe over the stock subframe. just for function, so all the welds are dirty flux core spray arc's... could be taken apart with a description note book written up and remanufactured in a combination of pipe sizes to fit around everything while maintaining a 3 inch charge pipe up each side of the car "except where it gets very tight and goes down to 2 inch". tho the turbo drains are on a 45 degree angle, the scavenger pump sucks hard enough to pull oil out of the engine oil pan thru the turbos, its on a pulsating on off signal that switches every second keeps the drain's under a strong vacuum, guess the center section drain angle keeps oil on the outer bearings/seals. just have to keep up on the maintenance/mechanical walk arounds, not tire kicking but all the parts are above the low points of the frame's and rails, occasional drive thru a large field... the manufacturer says there 800hp as a set, but at my elevation I know there not going to push over 550-600hp... can think its a look cheap under 1k build "banking records show its over 8k, (was a 700 buck car)", still took three and a half years because of restrictions/supply and demand. "very expensive to get too the front of the production que"

[@jameelhudson8558]

Got me excited like it’s my car

[@RacerX9]

Heck yea.. fun to follow the journey

[@davidhubbard7573]

Ooh it's a super snake

[@jaybeeman3862]

I think I’m first, let’s check this out I’m excited to see this!

[@RacerX9]

For sure buddy.. its a beast

[@tlrprice7]

Sweet!! I was wondering about wheels and tires lol

[@RacerX9]

Yes getting that worked out now

[@alexandermcdole8464]

Oh yeah👍, Keep it looking like a sleeper. Just my opinion.

[@RacerX9]

Certainly for the time being that’s that plan

[@Niugnep]

I'm excited to see what the numbers are. congrats on getting the beast turbo'd. Any plans to have it as capable as the hellcat was?

[@RacerX9]

This car will eventually be faster.. at least thats the plan

[@Niugnep]

@@RacerX9 definitely looking to see how far it goes. Thanks for the videos and for the response.

[@Sonicaceman]

That thing is going to be bad, I’m ocd and I think the only thing I wouldn’t like is those oil lines under the turbos with a lower car like that I would feel better if they are tucked up above them Great work by them no doubt

[@georgetalkachov6016]

When will they come out with a "kit' for the 5.7 Hemi .It would make a SWEET sleeper!!

[@thevishen1950]

Just change the plastic coolant tank to metal one’s. Your engine bay would look so good.

[@anthonycoleman2242]

🔥🔥🔥

[@theboringchan]

The European style Taillights would fit this car nice. The beautiful blue would really look great with the clears. I wish our cars got the euro styles from the factory.

[@RacerX9]

I will have to look into those for sure

[@expectnolove9978]

I figured hellion stepped up to sponsor your kit,but you would think they would have used braided hose for the oil lines....especially running on the bottom of the car

[@RacerX9]

Yes they did step up .. the lines on the bottom had to be cut to fit which is really difficult to do with braided lines

[@salimfaysal6651]

👍👍👍👍👍

[@torkfan6663]

Be careful! Can’t wait to see what it’ll do with the new meats on it! Might need a ‘chute. 😄

[@RacerX9]

Thats the plan.. we will see

[@gumbono.5215]

lol the deuce biggalow insert!

[@vincentpool2022]

Looks like this thing will be a beast. Hope your updating the stopping power of this thing?

[@RacerX9]

Lots of fun stuff coming up on this beast .. brakes will likely be a part as well 👍

[@Jurassic392]

😮😮😮

[@markr.9626]

I have a pertinent question??? Would you think of putting in the GT350 Manifold so it revs up to 7500? And has more air flow? I am new to a lot of this and am always thinking of how best to upgrade my Mustang.

[@scottieray]

Can you drive in the rain with this setup? What if you have to cross a low water crossing (tons of these in the Arkansas Ozarks where I live).

[@matrixbeastreloaded]

Back when I had a scatpack I was thinking of going with hellion system until I crunched the numbers and found out it’s same price basically if I went with hellcat instead lol

[@RacerX9]

That would be a very unique build

[@nightowl32]

anticipating killer reults!....she sounds nice! has anyone done this to their hellcat? I understand the kit is available

[@RacerX9]

I haven't seen it yet.. I'm sure someone has though

[@michaelronchette4106]

u should put a different air intake in there u will be able to hear the turbos better

[@HotRodDave]

Those are cool kits..is the air filter right under the exhaust manifold?

[@RacerX9]

Not right under it but not extremely far away ..

[@davidschroderflip4952]

Very nice. Bet you can't wait to get her on the road! When you buying the Super Stock?

[@RacerX9]

I'm waiting for Dodge to make some changes before dropping another 100k on car .. we will see

[@davidschroderflip4952]

@@RacerX9 I understand completely. When I traded my 19 Scat Pack ( 6 speed manual) in Destroyer Grey, the dealership gave me $41,000 trade in value ( paid $32850 out the door in 2019). Was going to get a 2021 Challenger Redeye Widebody in F8 green, but the pricing was way out of what I was willing to pay. So I was able to upgrade to a 2021 Scat Pack Widebody in Sinamon Stick, fully loaded for right around $46K. Glad I did ( it was right before the chip shortage.) Also keep up the great work.

[@rfor7471]

Do you retain the bottom plastic tray, or does that get removed for air flow?

[@fredito7013]

Do you drive your car in the rain? I like the fact that it's still a sleeper, but my only concern is that I live in south Florida and when it rains it floods, so my concern is the turbos sucking in water, and this looks like the same set up that this kit provides for the 392 as well. Any suggestions?

[@santoscano6004]

Should I supercharge my 6.1 or twin turbo?

[@__-om9jr]

I’m thinking about getting a muffler delete would I lose my active exhaust functions?

[@gabrielpichardo1492]

Wont having extra tubing and bends and stuff kill power?

[@raymondferguson4811]

RacerX are we gunna be seeing ur bad ass mustang at GapFest ??

[@eddizonmartinez3733]

Make a vid of you going to the track and tell everyone it’s stock lol

[@RacerX9]

It might happen lol.. although these turbo scream

[@bennybolick1360]

That backend is going to be doing the electric slide. I hope you keep some extra undies on you.

[@scottieray]

Those stock Pirelli P-Zero tires struggle to cope with the stock HP....

[@RacerX9]

Haha yes it’s going to be interesting lol

[@ms_stang1]

What is the header set up for this???? Build

[@markurbancowboy]

That kit looks awesome! What was the price for install at Gear Heads?

[@RacerX9]

I work with those guys quite a bit.. give them a call and have Phil give you a quote

[@theradroman4160]

The Mustang outside the shop looks like Drew Peacock's

[@reaperlmk9347]

Clikcked so fast

[@RacerX9]

Nice.. This thing is something else

[@jrrogersstang4696]

Let's go 🔥🔥🔥

[@juliancutter9812]

Do u know what size the turbos r?

[@swfm53]

What is the cost of the install.

[@Alex_thelionTV]

Hey RacerX I need a favor can you do a video on the inhibitors put on the charger pursuit I need help also I want to remove all police mods on the car

[@RacerX9]

Unfortunately I don't have access to one brother.. I will keep it in mind though

[@rustylozanolpc4227]

How much did that cost you out the door from gear head?

[@mr.300c]

How much boost can stock 5.0s hold safely?

[@dychejs]

Good question

[@sredouard]

Maybe I missed it are you running a factory exhaust or had you swapped it out before the Hellion kit. I see you removed an aftermarket x-pipe that replaced the factory resonator but was the rest of the system stock or...

[@RacerX9]

No this was the Magnaflow Xmod on the car.. it's fantastic

[@jblovell9065]

Talk talk talk talk talk

[@dtruth5769]

HOW IS THE TRANS AND REAR GONNA BE WITH ALL THAT EXTRA POWER?

[@RacerX9]

Eventually I will need to build both the trans and engine.. new driveline components coming soon

[@fabian-isf5310]

Ima guess that it's gonna run high 9s

[@RacerX9]

We will find out soon

[@high-rise8505]

Wow that's a big single turbo on that mustang! That's a BIG BIT@H LOL. Im very excited for you! 🇺🇸 USA all day and night 🇺🇸

[@RacerX9]

Thanks man.. yes that was a huge B^tch lol

[@davidhubbard7573]

DON'T WORRY THE HELLCAT WILL BEAT IT

[@RacerX9]

The Hellcat is definitely the faster car in the 60' but the Mustang will be the faster car on the highway .. as fast as the hellcat is.. seems crazy right

[@davidhubbard7573]

@@RacerX9 um if I remember right the gt 500 is limited to 180 mph that's the top mustang package the hellcat will walk you up to 203 mph