The new M3 and M4 ride height SUCKS! Eibach Front Spring Kit + Spacers Install + Comparison

From the factory the new G8x M3/M4 looks kinda goofy, and a large part of that is the ride height out of the box is just too high at the front. This ruins the entire look of the car for us.
The rear on the other hand looks nice for a standard car, and not everyone wants a low riding modified look. That is where Eibach's front spring kit comes in to fix this ugly front arch gap - designed to work in conjunction with the standard rear spring and even out the ride height.
A set of 12mm wheel spacers finish the package off to help the wheels fill the aggressive arches.
All of this comes together to make a perfect OEM+ package for those that want their car to look better without screaming modified.
Evolve OEM+ Stance Package:
🇬🇧 - www.evolveauto...
Eibach 20mm Front Lowering Springs:
🇬🇧 - www.evolveauto...
Evolve G8x Spacer Kit:
🇬🇧 - www.evolveauto...
For more information email us on [e-mail]
www.evolveautom...
www.evolvetunin...
Merchandise Available Here!:
UK - www.evolveauto...
USA - www.evolvetuni...
Like us on Facebook - / evolveautomotive
Follow us on Instagram - / evolveautomotive
/ imran.evolve
/ mattdearphoto
/ astons_life
/ hashyvolve
/ _barnone
Intro Music:
Original Upload: Carbon Citizens - Huracan XX (Copyright Free Music) • Carbon Citizens - Hura...
Click Here To Stream On All Platforms: fanlink.to/CCa...
#G80M3 #Eibach #G82M4

[@Peanutdenver]

Great vid guys per usual. This was the first mod I did to my G82 M4C. For some reason BMW loves a 4X4 gap on xdrive models and it just looked so odd when I picked up my car here in the States. I had to remedy it asap.

[@enamhassan6329]

i cannot believe the difference it made wow. Just looks incredible.

[@theunkownmr.562]

I loke how it sits. That OEM Plus look is what i like. I dont want to be scraping all over the place.

[@Hcarmad]

That arch gap is mad, and why BMW felt the need to stagger the wheel size I’ll never understand

[@saferandquieteroads]

looks much better

[@luminiferousaether6151]

I’d like to know the corner weighting before and after this mod to see how or if BMW’s famed 50/50 balance is altered

[@karlrushton8514]

When you guys going to get an m2? That will be interesting to see spacers, lowering etc as mine arrives July😂

[@EvolveAutomotive]

As soon as U.K. deliveries begin 🤞🏻

[@sandervn7836]

Isn’t it going to ruin the balance of the car by fitting different springs on the front only? Was looking at the same for my BMW F30, but didn’t do it due to the balance thing

[@lami150sx]

Think the general consensus is the back of the new M3 is already low enough unlike the M4 where the front and back springs need to be fitted, mines are going on next Monday

[@gpaje]

@@lami150sx He question was probably more to the balance of the spring rates and how it handles. This appears to be a cosmetic mod, which could affect the handling of the car.

[@Mac_F87]

I’m pretty sure Eibach will have matched the spring rates so as not to create a handling imbalance.

[@greatcolor]

Do y'all think the Öhlins kit is worth it for the G20 M340i?

[@EvolveAutomotive]

Haven’t ever experienced one. Usually pretty good stuff but we are a fan of the Bilstein for the road, drop us an email we might be able to help out - [e-mail]

[@darrenboston342]

Only ever fit Eibach to all my M-Power cars👌 Would never only do the fronts tho, always all four👌

[@dxbdxb242]

BMW Spend millions getting as close as possible to perfection I know the gap in the front arch is a little annoying but I feel safer sticking to the factory set up

[@EvolveAutomotive]

They spend millions to conform to many countries regulations not to make the perfect car.

[@ertugrulbae46]

For car handling, the ride height and suspension set up needs to match. E.g. you can't go for a super strict set up when there's less space for the suspension to move during compression and expansion. If the ride height is too low..it can cause juddering. But I believe BMW did this, only so they can "lower it further" on the CS/CSL models. Basically reserving a lower height for them.

[@fvresonanator]

​@@EvolveAutomotive I mean for an M4, I think they know what they're doing

[@jaygarcia6388]

They dont spend billions on R&D on real life driving and longevity.... The consumer does that for free... Stock setups are for only like 200k miles. Eibach ALSO does R&D on real life driving with stock oem. Haha

[@wexxexbest]

Very interested in this mod. Can you tell me how noticeable are any changes to the ride quality/ comfort and handling? Is it a lot harder? Is steering affected? I’m uk based so may well be in touch

[@EvolveAutomotive]

Very minimal differences to standard, especially for the big aesthetic upgrade.

[@mattssi]

Why did you take the entire strut out this time instead of the other method you typically use?

[@EvolveAutomotive]

Because this car is xDrive.

[@mbmb55]

Hello. I am looking but could not find about front lip on this car. I know there are lot of different designs. Which is that in the video and where to get one? Thank you

[@EvolveAutomotive]

Drop us an email - [e-mail]

[@Tweed22]

Is that socket needed to remove the strut mount?

[@JacoboMendoza-s1r]

How many hours labor should we be charged for this?

[@seagull413]

Can these springs be used in a non- xdrive M3 g80?

[@EvolveAutomotive]

Believe Eibach make one for the RWD cars also, please email [e-mail] for more info and to order.

[@motivesupplies]

Lovely

[@MP-yh4he]

I have the same spring for my x drive but it came with a “J/R” at the top instead of the “I/X”, is this alright?

[@EvolveAutomotive]

Contact whoever supplied them (hopefully us!) via email and ask them to check your part number. That could well be an internal code that is unrelated to the product code/car fitment.

[@adn9122]

Kw variant3❤

[@MUV4TRUK4]

What effect does this have on the cars dynamics?

[@EvolveAutomotive]

It’s the same kit Joe Achilles has on his M3 Touring and he’s certainly had no complaints.

[@AnbuReckz]

it will be a tiny bit harsher

[@maskyplayz2209]

Can you tune and modify a M5 CS??

[@EvolveAutomotive]

We can yes! They require ECU unlock but no different to a regular M5

[@maskyplayz2209]

@@EvolveAutomotive please make a video

[@Schnitzer325ci]

The car looks great, but lowering a street car is always a tough decision. I know because every time I see a speed bump .. I 💩 myself 😉

[@EvolveAutomotive]

This is a quite mild lowering amount, and you wouldn’t have many issues. Our G82 M4 and G81 M3 are both much lower than this and even then with some consideration to the bumps there is no issue.

[@righton7412]

Where are y’all located?

[@EvolveAutomotive]

Luton, UK - LU3 3HP We also ship worldwide - www.evolveautomotive.com

[@Racedoc]

I installed 10mm all around they looked good but the steering was awful so I had to take them off.

[@sparkyt6497]

So much in-decisiveness and negative opinion on this cars looks but hasn’t it turned heads and opinions now

[@Shingorani]

Front looks like it needs 15mm spacers instead of 12mm

[@EvolveAutomotive]

You could if you wanted to be more aggressive

[@neilgouws6962]

alot of people missing the point here .... this is a esthetic mod , NOT a performance enhancing mod ! I think it looks dope 👍🏻👌🏻

[@EvolveAutomotive]

100% - Pretty much any basic lowering spring is exactly that

[@mred9161]

Aesthetic is the word you’re looking for 😉

[@neilgouws6962]

@@mred9161 thank's you so kind , at 51 .. I still appreciate it when people correct me , with my second language grammar 😉

[@mred9161]

The arch gap is the least of that problems - the front end needs ripping off and replacing with something more befitting of an M car.

[@pedroMJLB]

It's Worst

[@hswing11]

OH LOOK AT ME A WHOE LOT ON MONEY FOR NOTHING

[@JacoboMendoza-s1r]

How many hours labor should we be charged for this?