THE NEW TUYA INTEGRATION (HACS INSTALLATION)

[@gazgadgets]

Nice work Mark! Excellent video. All set up. Looking forward to seeing how Tuya collaborates with the HA community to make their services more appealing to use.

[@MarkWattTech]

Hopefully it just gets better and better. There’s been a surge in opened issues which is good as it means more features and bugs to be worked on.

[@yeohkokcheow3781]

Nice 👍 video. Good to know it will have local control..will hold my horses till it's ready. Thanks!!

[@simonburke6681]

I'm testing it with some devices I couldn't previously integrate and going to add a few more devices that I don't need reliance on. I get it tho HA is geared towards achieving local control and the sooner they add this the sooner they will get more beta testers in on it.

[@gverran]

Great vid. I hope that the new Tuya integration is going to support power monitoring smart plugs in exposing the power levels, etc as sensors.

[@MarkWattTech]

They have started work on it, but yeah it is all planned 😁. And thanks Glen!

[@JamesMeikleAustralia]

The add + the country code. Legendary comment, thanks Mark.

[@MarkWattTech]

Nice one James :)

[@finereplicawatch]

You are always the best Mark......

[@MarkWattTech]

Thanks Andreas! :D

[@banguesesm]

Excellent work Mark! Thank you a lot for your help with Tuya. Unfortunately I'm still struggling with HA integration. Neither with or without the plus sign in the country code...

[@MarkWattTech]

Any Cloud Projects created before June wont work. You will need to setup a new Cloud project. Forgot to mention this as I don’t show the account creation Sorry! UPDATE! an update came out today 03/07/2021 1.3.1 that removes the region field from the config. This should allow for easier setup for some users. Cheers.

[@AndysTV]

Excellent video! Does the Tuya plug power meter work?

[@naronaroyan323]

Development Method does not show Smart Home PasS; also unable to delete projects that I do not want anymore. Also shows Invalid authentication even with + in front of country code...

[@simonburke6681]

Thanks again Mark, bloody legend!

[@MarkWattTech]

Thanks as always Simon 😁👊🏻

[@charandeeplotte428]

Excellent Video! I managed to follow all steps and my devices appear under the cloud project that was created. I also managed to login successfully with no errors, however none of my devices show up in the integration after login.

[@EddyElCamino]

Thanks for this and mostly all of your videos so far. I have a couple of different power measering sockets installed and I can't figure out why one is showing all possible entities (switch, current, power & voltage) but others doesn't. I know it's still the beta but do you know if it might be an issue with my config or are there still different devices not fully supported although quite similar. The one's showing all entities is a double socket SP211 and the others are those tiny Gosund SP111

[@pistafarkas4890]

Hi, Mark, Great video! But of course I have a problem like everyone else. I installed tuya v2, and I was able to set it up, but I can't see the configure button/text under the logo. I need to configure the thermostat, because its shows wrong temperature! I tried to leave the "old" tuya also with tuya2, but the the configure button disappeared from old tuya also. What is your idea, where can i set the thermostat data? Thx your replay..

[@MaxGoddur]

Love your videos BUT still searching for a course on learning NR for HA.

[@Nuk1945]

manually copied and entered 2 dozen local keys for local tuya. a pain. Was switching the sonoff based devices.. Hope they get it done soon

[@bernisworlds]

does it now also correct the thermostat displaying temperatur?

[@attilatoth8329]

Hello. Thanks this vidio. Please help. Why is it that if I do not turn on the lamp with a home assistant, but manually, its condition does not change. It's a smart wall switch. The problem also exists with tuya and tuya v2 integration.

[@Quacka666]

I live in Australia however I need to create my TuyaLife account in US for this to work. Using Australia TuyaLIfe account doesn't show the device in the IOT account when I register it as USA, the region list I have under device only shows America. When I try to add the integration I get authentication error even I put country code as +61 After setting both accounts to USA, integration works like a charm.

[@MKAW1234]

I'm getting the same problem, I can see where to change the IOT platform account, but not my Tuya app, any tips would be great.

[@jimborman5716]

Im in Australia using the Tuya Smart app. for the Availability Zone: I used Europe. No worries.

[@craigjackson1764]

@@MKAW1234 I did what Jim did below - select Europe and ONLY Europe in the availability zone. The second I did that it worked fine and all devices showed up.

[@xbmcnut]

Thanks for the heads up. Sadly, at least from NZ, the Tuya developer website is currently so slow its unusable. You might have created too much interest! I'll revisit in a week once the dust settles.

[@Quacka666]

I am from Australia and it is fine for me

[@ptrwsk]

What ??? No IR devices ??? My roomba, 3x LG Air conditioners all controlled by Tuya IR blaster will not work ??? Why Tuya why !?!

[@MarkWattTech]

I don't think it 100% no, its just a no for now.

[@3210vishnup]

While selecting the api, device status notification is not to be found.... What is the problem.??

[@rishabMehta7]

Does fingerbot work?

[@dionisischatzimarkakis940]

Hello ! 1. I want to ask a simple thing: If our server doesn' make any API call, does TUYA support this feature: When the status of the device changes locally using user's finger or action is there any way that the device informs automatically our server with any socket based or other realtime tool ? It is really old school or stupid to force the server ask for the status all the time using their API calls. 2. Can TUYA return multiple device status in one API call ? Imagine hundred different devices setup, if our server wants the latest status of these devices he shouldn't make 100 separate API calls, TUYA should give the ability to ask for the status of multiple (100+ ?) amount of devices. If the above 2 features are not supported yet then TUYA developers MUST build it ASAP please ! Thanks !

[@Drews9069]

Hey Mark, nice video. I installed Tuya v2 1.5 and added my Zemismart curtains motors easily following your instructions. My goal is to be cloudless, so I'm looking forward to the local feature - hoping it will also be cloudless although my expectation is that they will provide local control, but will still require the cloud. It will be interesting to see if the tuya devices will operate in local control when cloud access is shut off. Your comment on a question below stating we will need to keep our developer accounts active to continue to use the tuya v2 local control feature reinforces this perspective. Is that how you see it working - local but not necessarily cloudless? I'm also wondering how local tuya will stop working when they deprecate tuya v1. I get that local tuya uses the old api, but if local tuya is both local and cloudless (which I thought it was), how could it stop working when tuya v1 is deprecated?

[@MarkWattTech]

Hey Andy. Glad you got them added and working! For now with the Tuya v2 in beta you will need the dev account. Im not sure if this will be the case when v2 is actually merged into HA, or if Tuya will somehow automate this process to make it simpler for users. E.g you just sign into the integration and it does all the backend setup. I can't see non technical users going in and creating a dev account etc. I guess we will see in the coming weeks and months if/when local control is added. I think localcontrol will require you to still register devices against the cloud, but you will be able to use a local key (Kind of like how local tuya does) to controlthe device. This will mean you could block the device from the network (like local tuya) and control it without it talking to the outside world. So device provisioning with Tuya, but then local control (if that makes sense). That's just my thoughts anyway. Nothing has officially been said in terms of how it might operate. Local Tuya uses the old api which wont be contactable when it's dropped. The new v2 integration has different security so you wont be able to add devices the same way. Any current added devices in local tuya I think will continue to work (if you have them blocked from the outside). Sorry for the wordy answer! Hope it makes sense.

[@Drews9069]

@@MarkWattTech Thanks Mark, makes perfect sense. I think we are on the same page wrt our expectations. I look forward to checking it out when its released. Cheers!

[@frankguay3011]

What about using it to simply expand the range of BT 4 devices? Does it support that? how?

[@Dennis-qm4rd]

Hi Matt, thanks for your awesome post, as always. They are so perfect to listen to and to follow all along! Now, I've added v2 and managed to see my Tuya devices (only 3, so maybe more when v2 will have the possibility to be used only locally). 1 of my devices is the LSC RGBW Led Strip (from a store called 'Action'). It is in there, I can toggle it, but I do miss the color picker. Is that right? Is that something to be added? Should I mention this somewhere or... Can you help me out? Thanks a lot!

[@MarkWattTech]

Heya :) Over time more devices will be added. You can also open up issues on the Tuya V2 GitHub to ensure your devices get added, but over time they should all be supported (with local control on the horizon). Colour and other device features should also be updated over time. Also, it's Mark not Matt! :P Thanks for the feedback. Glad you're enjoying the content.

[@Dennis-qm4rd]

@@MarkWattTech I understand...Strange is also, that I can set it 'on' , but not 'off'. Well, well need to wait then 🙄

[@Dennis-qm4rd]

By the way, now you say it's 'Matt' also 🤣 Sorry Mark!

[@MarkWattTech]

@@Dennis-qm4rd I actually called it myself then 🙈😂😂

[@СергійНазаренко-в5э]

I'm trying to log in, but I can't. Although the password logs are correct. The standard tuya integration works fine for me, and the localtuya integration also works without issue. And here an authorization error is displayed. Any ideas?

[@MarkWattTech]

Have you checked you account details are all correct? You also need to be using a new project (as the APIs are different). Any project created prior to July may not work correctly. I forgot to mention this sorry.

[@PubnicoExpat]

@@MarkWattTech I was having the same issue. Thanks for the comment!

[@neil7902]

Same issue. New account. Checked details. Restarted, authorisation error... Using iot platform cloud project as China. Tuya app set to +61 (Australia)

[@davidhampson9918]

@@neil7902 I'm also having issues with an Australian account

[@neil7902]

@@davidhampson9918 ive logged a bug with github. i recomend we all do the same

[@danieldekovic9706]

Tnx Mark. I installed this integration today but couldn't log in. I saw your video, followed the instructions and I'm in. Just little update on country code. If your country code has 3 numbers than its without + sign ie for Croatia is 385 not +385.

[@MarkWattTech]

Nice one. Thanks for sharing Daniel 👍🏻

[@_Plaethe_]

I still get the invalid authentication. Country Code and correct login credentials verfied. Doesnt work for the moment.

[@boonchinx]

An abnormal behavior was noted when using TUYA, TUYA 2 and Localtuya together in HA (especially when using with automations). For TUYA2 devices in the integration card, the buttons will return back to its position when pressed (but the devices were triggered). This were not happened to the TUYA or Localtuya devices. Could this be the TUYA2 INTEGRATION problem? When the same devices were using TUYA or Localtuya, there were no issues. Thanks

[@MarkWattTech]

Just editing a video that shows a fix for this 😁. Stay tuned! Should be available shortly.

[@drewp8399]

Sadly I don't see camera feed on the supported device list

[@fred7flinstone]

What I am unsure of it which devices are compatible with the Tuya app and / or home assistant. I seem to have a number of Tuya like apps.. lie Mi Home, eWeLink, Magic Home, Yeelight. Are these Tuya compatible, should I move the devices from those apps into Tuya? Is there a list of compatible devices? I've tried to bring in the Yeelight D2 Lamp into Tuya without success, so I am unsure of what goes with what.

[@MarkWattTech]

Theres currently not a list of devices available from Tuya. I posed the question to them today about creating a community based list where users can share devices that work. Which will help others out.

[@fred7flinstone]

@@MarkWattTech Thanks, I find it hard to know what is Tuya and what is not.

[@rajeshsaha85]

Hi Mark, first of all thank you for sharing your videos. I have some tuya motion sensors connected through Tuya Hub, i can see all those sensors in HA with your Tuya v2 integration but for some reason it does not work with HA automation or show the realtime motion. If there any way to use it without flashing those with Tasmota?

[@MarkWattTech]

Hey Rajesh. Thanks for the feedback. What brand are your motion sensors? It may just be they aren't fully implemented yet. Might be worth checking the issues on GitHub and creating one for your set brand of sensors.

[@rajeshsaha85]

@@MarkWattTech thank you

[@rajeshsaha85]

Some sensors i bought from Aliexpress but most of them are from Sonoff but those are connected with tuya hub, not sonoff bridge

[@TheUnofficialMaker]

where can you buy tuya products in usa

[@jirigary]

Thanks for great tutorial. I did everything like in video, but I have problem, I can't see any devices under Tuya v2 integration, any advice? Thanks

[@chrisdennison3348]

Great video! I see all my lights in the new integration and also that "PIR Detector" is listed in the list of supported devices. My PIRs are there in the Tuya dev platform device list (and on the Smart Life iPhone app) with my lights, but are not visible in the HA Integration. Any ideas for this please?

[@junjinwong8002]

Same thing that happened to me. I reinstalled Tuya v2 through HACS and it's available in HA. (I originally used custom components, i think it's not the latest update). However, I cant seem to do anything with this PIR in HA

[@RobertAnthonyPitera]

Thanks to this video and your API video, I was able to get this set up rather quickly. In fact, the only bottleneck was finding an email address that Tuya would send to for verification. LOL I was kind of disappointed though that while they support the humidifier, they don't currently support the DEhumidifier. Is that something you could query them about when you contact them next? It would be really valuable to me to get an alert when the tank needs to be emptied! Thanks again for this and all your other videos, Mark. Really enjoy them!

[@MarkWattTech]

Hey Robert. Thanks for the feedback and for sharing :) Sure I have a bit of a list to go through with them haha. You also might want to open an issue on the GitHub page. That way your specific make and model can be added :)

[@DerekWalker55]

Hi Mark, thanks as always for the great videos. I have not been able to set this up, it seems my Tuya IoT Platform screen looks different to yours and I am unable to setup a Smart Home PaaS development method, I only have Smart Home and Other. Do I need to setup a new account? When trying to use the HASS integration I get an authentication error if I use a Smart Home project

[@MarkWattTech]

Hey Derek, I will be releasing a new video on the full setup process as it has changed ever so slightly. When did you create your project? Only newly created projects will feature the new API controls (you may just need to create a new project).

[@DerekWalker55]

@@MarkWattTech Hi Mark, thanks for the reply, I did create a new project, but what I have now found is I hadn't linked my devices via the app with the project, once I did that the Tuya V2 integration added fine and I can see the devices. I suppose that makes sense, you need at least one device for the integration to load

[@MarkWattTech]

@@DerekWalker55 glad you solved it. I think a few people have run into this issue. I should have shown the full process sorry! I just didn’t as right before this video I had covered it so many times.

[@frankenguson6164]

Thank you for this informative video!

[@MarkWattTech]

Glad you enjoyed it :)

[@TwanJaarsveld1]

i still couldn't get my RGB lights to work proper under local tuya, so this would be great

[@zeljkojakopic1162]

Do you find solutions for RGB control?

[@valtek1959]

Hey Mark great tutorial, I was able to get Tuya v2 added to HACS without a problem, but when I try to set up a new integration under the Configuration tab in Home Assistant, the old Tuya integration appears in the list but not the Tuya v2. Any suggestions on what I could have missed? Thanks, most appreciated.

[@MarkWattTech]

Sounds like a browser cache issue. You may have already resolved this by now, but Try clearing your cache :)

[@AMDnate95]

@@MarkWattTech Thank you. I was stuck on this as well!

[@sajidahmed7310]

This is a fantastic video. Unfortunately it works great for the lights but not FAN...Which is a bit dissappointing...It shows up in the HASS integration but you cannot perform any action

[@MarkWattTech]

Hey Sajid, It may just be that that particular device isn't fully supported yet. I would deffo recommend opening an issue for it :)

[@hiraniha]

After adding the Integration and rebooting HA, when I do Add Integration I only see Tuya and LocalTuya, I don't have Tuya V2. Any idea what I have done wrong, I have tried it a couple of time, I can see the files in the custom components

[@MarkWattTech]

Sounds like a browser cache issue. Try clearing your cache and you should see it :)

[@hiraniha]

@@MarkWattTech Spot on, thanks for the quick reply

[@hiraniha]

Managed to get past the logon now no issues there. It's picked up a Diffuser as a Device but doesn't seem to be able to actually control it either the Light or the Diffuser On/Off It didn't actually even pick up a PIR sensor I have in the app at all however

[@MarkWattTech]

What brands are the devices? Might be worth comparing them ti the supported list and opening an issue. That way they can get full support in the integration :)

[@LaboKnititham]

@@MarkWattTech Thank you

[@bbrockx]

Excellent video and the integration works but i have a problem that the power values of my sockets only update after reboot. Is this still an issue or did I configure something wrong?

[@MarkWattTech]

That sounds like a bug yeah. Check the issues to see if anything is reported. If not, open up a ticket :)

[@truongnguyenuc8284]

error: Invalid authencation I used country code:+1 but already erroring

[@Max-ph5in]

When I create a new project, it only gives the option of "Smart Home (SaaS)" or custom in the development method. I have tried various industries starting with Smart Home but PaaS does not seem to be available? This is a region (Availability Zone) thing? Currently i'm set to Europe

[@Max-ph5in]

Worth noting (from Tuya dev "How to Use Tuya Home Assistant Integration") - If your cloud project of Smart Home PaaS type is created before May 25, 2021, you need to migrate to a new project. .. Unfortunately this looks to end the option to extract keys from the developer website. The was the response from Tuya TS to create a new project :/

[@paial]

This is great news, but the lack of planned support for IR devices is real bummer. back to soldering esp12...

[@MarkWattTech]

I've asked Tuya for an update on IR devices and will update when I know more. Wether it's just a "No currently not supported" or if its "No support ever".

[@richardcassel6393]

I'm trying to configure Treatlife Switches, dimmers and fan controllers in HA. With the standard Tuya Integration the Switches and DImmers are exposed but not the Fan Controls. WIth the help of your videos I installed Tuya V2 and only the switches are exposed in HA. Do you have any idea. Is there a manual YAML config I can do. Switches are model SS01S, Dimmers DS01C and Fan Controllers DS02F.

[@MarkWattTech]

Hey Richard. It sounds like they may just not be fully implemented yet. Might be worth checking out the issues on GitHub to see if anyone's opened an issue for it. Tuya do plan on supporting a wide range of devices and will slowly be rolling out support. They are currently using a voting system on GitHub to get the most requested devices in.

[@richardcassel6393]

@@MarkWattTech Thanks I figured that since it's beta I need to wait.. I did put in request for implementation of the fan and dimmer. Love your videos.

[@MarkWattTech]

@@richardcassel6393 nice one Richard. And thank you! Means a lot 😁

[@colin309857]

Hello mate, i followed ur guide but the devices are not showing? the normal tuya integration is working for my light? do you have a clue for what to do?

[@MarkWattTech]

Hey Colin. Sorry for the delay. Did you manage to get it sorted?

[@AndresEscobar-wi4nm]

i just installed this new integration and it recognizes all my devices. However device/sensor/entity states do not update automatically... so according to the new integration, my door is always closed, my robot is always cleaning, my curtains are always closed... and my luminance level is always 100 lux. Any ideas how to fix this? or is it a bug?

[@Quacka666]

Do you have any issue with status of lights? I just bought a ceiling light and the state doesn't seem to be updated in a timely matter. It prevents me to do any automation related to dimming and color temperature. I would like to check if the light is on first before applying effects.

[@MarkWattTech]

I did in an earlier build (prior to 1.3). But this has since been fixed. What bulbs are you using? Might be worthwhile opening an Issue for the lights.

[@rclarkstube]

I'm still trying to figure out what's in it for Tuya, helping to make V2 Local control? Hope they're not planning to blow it up.

[@TheUnofficialMaker]

selling lots of devices

[@luisrossi3249]

Hi!, i have a bluetooth tuya lamp, and I want to control it with home assistant is there a way to do it?

[@MarkWattTech]

You could use a tuya Bluetooth to WiFi gateway (Not sure if they are currently supported in the v2 integration though)

[@encostablanca]

Hope that now we will be able to see power usage of plugs etc.. Directly with this update

[@MarkWattTech]

Work has started on it, but its not full there yet. Hopefully we will see this improve in the coming weeks :)

[@seanbrewster9018]

Great video, as always Matt! One problem I've encountered is when I try to add the Tuya V2 integration in HA (Configuration > Integrations), I get authentication errors even though my credentials are correct. Could this be server update issues at Tuya's end?

[@MarkWattTech]

When did you create your cloud project? Projects created before June wont be compatible. I missed this out the video as I didn’t go through the account setup sorry. Glad you enjoyed it! And it’s Mark! 🙈😂

[@seanbrewster9018]

@@MarkWattTech Created my new project today, followed your instructions to the letter, so assuming it's at Tuya' s end.

[@MarkWattTech]

@@seanbrewster9018 ah okay, in which case you could be right with the above. Worth checking the issues tab to see if lots of people are reporting it

[@seanbrewster9018]

@@MarkWattTech thanks, will post the outcome.

[@tonyzworld]

I had the same issue. I had to scan a qr code to add the app for this project. I had everything correct...just needed it to use the app on the new project. Once it was setup everything worked as expected.

[@synco1985]

Hello, I have an problem with this, it does not show in integrations after install from HACS and reboot. what do I do? I have just installed 1.4.1

[@synco1985]

Never mind, I fixed it :))). I've installed an older version, restart HA, update to the latest version, restarted HA, and boom. It showed up :P

[@MarkWattTech]

Sounds like a browser cache issue. Try clear your cache and it should appear :)

[@xcraftman52]

Does this combine Local tuya and the old API HA Tuya?

[@MarkWattTech]

This is using the New Tuya API (old tuya and local tuya utilize the old API). This one will replace the current one, and later down the line will support local control. Removing the need for Local Tuya.

[@um1007]

Hi Mark! The Tuya Developer account has only a trial version for a year. Do I need to create new developer account, link my Smart Life account, then create another HA Integration after the trial ends?

[@MarkWattTech]

It will let you freely renew at the end of the year 👌🏻

[@um1007]

@@MarkWattTech That was a really quick response! Best youtube channel! Thank you!

[@carlosribeiro8613]

today I tried to install by integration by hasc and also by custom components and it doesn't show

[@MarkWattTech]

Have you added it and its not showing? (If yes, try clear your browser cache - it should then show up)

[@carlosribeiro8613]

@@MarkWattTech thanks for the help .yes. I installed it both ways by husky and by custom components. but does not appear. I cleared the cache when I installed hacs but I'm going to log in again

[@MarkWattTech]

@@carlosribeiro8613 you will need to clear the cache after adding new components (if they aren’t showing)

[@ilco31]

i hope things like light and temp sensor wil now finaly work

[@MarkWattTech]

They have started working on it, so hopefully it will just improve over time :)

[@michielparco7641]

No IR integration ??? Sounds like Logitech dropping support for own products ... Not good sign for Tuya. I have 2 socket and 2 AC working with Tuya IR device.

[@MarkWattTech]

I think it’s more of a “no plans just yet” as appose to a straight up no. We will have to see how it evolves and develops. If enough people are requesting it im sure the devz will look into it.

[@salreus]

thank you, thank you, thank you.

[@Yersinia]

I followed all the steps and I keep getting 'Invalid authentication' error. Can't log in. I did put +

[@MarkWattTech]

Have you double checked your account details? When did you create your Cloud project? Only newer projects will work as they need to use the new Api. Projects created before July wont be compatible - I didn’t cover this in the video sorry.

[@DT_Cyklone]

@@MarkWattTech Same here, everything as correct. Have created a new project twice and linked to smart life app. Still no joy. This is nuts

[@Yersinia]

@@MarkWattTech Yup I triple checked. I just created the dev account today so the project is fresh as well. :(

[@vicenteschild5561]

have you solved this? im having the same issue

[@vicenteschild5561]

I've found the solution. You need to "Link the device" to the IoT account. In the development page go to "link devices" and then "Link devices by App Account"

[@mustafafathi9507]

authentication error ...! I had created a new project as you said and put + in country code !! Is the issue in my country/region ?

[@MarkWattTech]

Heya! Did you manage to resolve this? The devz made an update to remove the region section to help simplify setup.

[@mustafafathi9507]

@@MarkWattTech now it worked for me. thank you for these great efforts

[@MarkWattTech]

@@mustafafathi9507 glad you got it working 😁

[@DinojCD]

Trial account will allow only 50 devices ?

[@MarkWattTech]

That correct yes. Usually the account are just for manufacturers and developers wanting to add and create software with Tuya support. Im not sure what the process will be for the end users once V2 is added to HA core.

[@rotor_fpv2848]

Nice video mate. Is it me or is the sound out of sync?

[@MarkWattTech]

Hey mate. Apologies, I think there actually is a few MS delay - it’s only very slight. I'm using a different setup in this video and didn't sync the mic. Will have fixed for the next video!

[@Beardofy]

For anyone still struggling with an invalid authentication, I had to use the account that started with gg-*************** for it to work. I think its because I originally set up my smartlife app by linking it to my Google account. You can if the account by going to the Device List and copying the account at the top of the list including the "gg-" at the beginning of the numbers.

[@PabloTavasciDozo]

Te amo genio, horas perdidas hasta encontrar este comentario.

[@seanbrewster9018]

Should have added, as this only works with project post-June, I had to create a new project on Tuya IOT

[@MarkWattTech]

Hey Sean. Yeah sorry about that. It’s because I cut that section from the video. Ive done so many dev account setups and adding the app to the cloud projects, that I just didn’t want to do it again. I even had it written down to mention it, but still forgot 🤦🏻‍♂️.

[@dajunjiet]

sucks for me . i just get invalid authentication.

[@MarkWattTech]

When did you create your project? (Projects pre June wont work) And have you linked the app in your developed account? :)

[@dajunjiet]

Read the wiki. Got it working lol.

[@MarkWattTech]

@@dajunjiet 👍🏻

[@AmonReich]

I am waiting for local access. Please let us know when it is ready. Tell your Tuya friend they have done a great job 👏 on the other hand the Home Assistant users are waiting for #local. Once ready - it will boost tuya sales tremendously 🔮💰

[@MarkWattTech]

I will be doing update videos on this (maybe in a similar style) to keep the HA community up to date with what the devz are doing :)

[@TwanJaarsveld1]

14:38 get the message "Invalid authentication" but i know my password and username are correct because it works on the v1 integration

[@MarkWattTech]

Did you have any luck?

[@TwanJaarsveld1]

@@MarkWattTech sadly no, i already used the same account and credentials to use Local Tuya, could that be the problem ?

[@mattb7406]

I couldnt authenticate UNTIL i added my phone app devices tot he cloud project

[@MarkWattTech]

Sorry I didn’t show this part in the video! Iv’e done so many cloud project setups lately that I didn’t want to do another for this vid. Glad you got it working 👍🏻

[@jonpg1jsf118]

How lazy is that ??? An Automated vacuum cleaner ! Just wondered though if you can retrofit something to a standard Dyson ??

[@MarkWattTech]

That would be a project I would love to see haha.

[@Ozlizardking]

Robot vacs are awesome

[@simon_quinn]

local control :-D

[@ValZakharov]

It could be interesting update for those like me keep receiving Log in error, even after double checking all log in details are correct. I tried instead of [e-mail] log in with AA-BBBBB (A - country code without + and B - my phone number registered in Tuya/Smart Life account) in and all rest details were the same. And I got logged in successfully with all devices shown up. Otherwise I tried 100's times to log in without any joy.

[@alistairecook4606]

For some reason, my v2 will not show in the integrations! i have installed it manually and also used hacs with no joy :(

[@MarkWattTech]

Have you tried clearing your browser cache? :) if not clear your cache and it should appear. Failing that, wait till tomorrows update where the new integration is going to become part if HA core officially (and be installable directly through HA integrations - no HACS needed)

[@alistairecook4606]

@@MarkWattTech I tried the cache still didn’t install :( I will wait for the update tomorrow. Any idea what the minimum version for HA is going to be? I might need to update it as I’m running Augusts release

[@MarkWattTech]

@@alistairecook4606 good question. Im imaging it will need to be the latest as its an update to Core that adds in the new integration.