The Perfect Affordable Plasma Cutter (Yes Welder Cut 65DS)

[@blackseabrew]

I have a PrimeWeld Cut60. I think I paid $600 two years ago. It appears this unit has similar capabilities although the Cut60 has a port for CNC control. Either way if you have a need to cut steel under 1/2" and you are on the fence buy from either of these companies. The productivity improvement vs cutting wheels or oxy-acetylene makes them very cost effective. A typical one hour part now just takes 5 minutes.

[@beer-iron]

Looks like 1/8 plate. What settings are you using

[@gregj.gotham4402]

Yeah that worked great as far as I can see from here.

[@phillipmoore7283]

I have the cut 55 and it works awesome. I think that one is a bit more powerful.

[@nexgenbreaks8844]

Question: what is your air compressor CFM output? How many gallons reservoir? The plasma cutter says required CFM is 5-7... thanks

[@submarineaz]

Can you use a plasma cutter to blow a hole through steel like a leaf spring to mount a Stableload from Torklift? It would save a lot of time.

[@markcaruana2697]

Hey I have a question, I bought the badlands Apex 12k synthetic rope winch and I need to remove the clutch handle to grind it down to fit my bumper. I watched your video because I pulled out the set screw and the handle won't come out. I tried turning and pulling up but couldn't get it out. Do you know what could cause that. You've gotten a good look at the internals I thought you might know.

[@MrSrtman18]

On 110. Can i cut 3/16?

[@johnbailey2034]

The new model is black and the 220 plug is first and you plug the 110 on the 220 plug .

[@freeridefilms7254]

How has this lasted over the last 7 months?

[@MuddyBeards4X4]

Been using it alot lately. Love how much time it saves me over using a cut off wheel

[@slogan9105]

well done

[@weldphd]

Yeswelder has a programming error with this model. When you turn the machine on, it will automatically default to 65 amps on the display, but it will not output full amperage unless you change the amperage. If you do not change the amperage it believes it is running on 110 volts and outputs 35 amps. Try it, you will notice. Huge difference.

[@uski]

Did you tell them? Did they reply?

[@justoalarcon8684]

Falto ver el manómetro NC cuánto PSI de aire tiene que tener la máquina

[@merrittmcdowell8675]

Wait! who's this guy lol

[@MrSrtman18]

Davis or somebody

[@weldphd]

I should also add, this is a 45 amp cutter. Yeswelder uses 65 amps as advertising propaganda.