The Perfect Christmas Gift for Any Machinist - Haas Automation Tip of the Day

[@nyccnc]

Thanks for making these - and not taking yourselves too seriously ;) Merry Christmas!

[@thundercuck1779]

Why don't you come to the dark side and become metric ;) You too TerryBerry. The day will come ;)

[@markterryberry4477]

@@thundercuck1779 Lol. I meant, come to the dark side and pick up a decimal-inch Steel Rule - but I would flip the switch on going all Metric today if I could. Merry Christmas!

[@V4evocom]

Metric Christmas!!!

[@victorolguin]

Should have put a link to one of those decimal inches ruler. Great video!

[@eliasrosas5540]

I just started using wips and when i try to get work offset alarm come on (skip signal found) somebody can tell me what that?

[@He-Is-One-and-Only]

Lets come to the common terms. "Metric" Happy Christmas & New year.

[@funkalicious2002]

The perfect gift is obviously alcohol so you can hopefully forget that you have work to do.

[@burville100]

Merry Christmas and a Metric New Year Mark

[@kkknotcool]

SAE you all next year.

[@mickeymouse-lu2yk]

A metric chrismas and until then we should at least be on the tenths - nice to see the thought end effort that goes into these videos, even the less serious ones are very good!!!

[@agie170hss2]

Even your simplest videos are still always entertaining Mark! Great work as always. To everyone else -- I've talked with Mark at the last two IMTS shows (somewhat briefly, but hey... he's a busy guy!), and I can say without question that he is as personable and friendly in person as he is in all his videos... maybe even more so. Haas is lucky to have you Mark! Every big company should have a public-facing personality like you, but few are so lucky!

[@imaamericangirl1406]

I so agree!

[@duhkstblvd2304]

The coffee was a good one 😂😂

[@officergrizly2]

I've had mine for 18 years. Was given to me by my shop teacher in high school. I still use it every day.

[@billkellogg1403]

Dear Mark, we miss you!!! Merry Christmas!!

[@drage275]

Waiting for the "did the metric system get you to the moom first?" Comments haha. Anyways, im in Australia working in a workshop with a lot of history and long running contracts which use imperial dimensions on drawings. Some of our older guys measure in imperial naturally and some in metric. It's super important to know both, especially in the US right now.

[@radams581]

I love imperial, and metric. In Britain we generally work in metric in machining. Our road signs are all imperial! We think in both here! I can’t visualise road distance in metric. When someone says thats 100 miles away - I can see it!

[@Raptorman0909]

A set of good rules/scales are to a machinist what the pen USED to be to a writer. Thanks once again to Mark for doing these videos and doing them with a sense of humor. Information doesn't have to be boring...

[@feroferitos2063]

Merry Christmas and happy new year! (Požehnané Vianoce a štastný nový rok!)

[@Slipprymongoose]

Coming from straya with metic when I have to be forced to use imperial working in tenths makes it so much easier than trying to work in 64ths or 32nds. Work smarter not harder

[@Rob_65]

One year later - one more year of enjoying my (metric) pocket ruler. I had different rules: metric/inch ones and also metric ones with millimeters and half millimeters. But that's just the tip of the iceberg... I had one with mm on the bottom and 1/2 mm on the top, one with 1/2mm up to 5cm and then just 1 mm increments. They both have the problem that you can only do one thing on one side. Now I have one with 1/2mm on the front and 1 mm increments on the back and that is surely my favorite. The only problem is that I just have one and I don't remember where I got it from. I sent out my "dear Santa" letter this year with a request form more but that did not help. If anyone knows where to get those - I could use a couple of them: one for my coffee (is it a large or a small one), one for my cake (how thick a slice do you want) and a few to hide in some tool drawers around the shop in case I need one and forgot to put it back in my pocket.

[@myeyesropen1150]

Merry Christmas to all machinist and everyone else in the world..

[@LEGOBubuS]

We wish You Merry Christmas and a Metric New Year! 😂

[@z3rodev]

Metric Christmas and a Happy new year :D

[@Austinfamily1]

All I want for Christmas is a autographed picture of mark terryberry!

[@spkrman15]

Merry Christmas . Thanks for the videos. Everyone has helped me become a better machinist

[@ExMachinaEngineering]

WoW!!! That was a bold statement... Merry Christmas everybody!!!

[@_P0tat07_]

I would absolutely take a box of bandaids as a gift 😂

[@robertschmitt9160]

That's the problem is that everybody wants to wait until the rest of the USA switches to metric. Just do it now. Biggest customer at the last shop I worked at designed in fractions and then rounded to 1,2 or 3 decimals based on tolerance. They also only used metric hardware. It was dumb as hell.

[@therussianmachinists2409]

Thing is, the whole country was built on the standard system. All machines, all buildings, and lots in between. I think it would be difficult to switch overnight Jimmy

[@vite1968]

@@therussianmachinists2409 u call it standard in US?

[@therussianmachinists2409]

@@vite1968 interesting choice of name, huh? Haha. people call it both standard and impareial. But I think you'll hear standard alot more often :)

[@mrfancypanzer549]

@@therussianmachinists2409 it's not impossible, most of European machinery was built with withworth screws long in to the 20th century.

[@KBowWow75]

Keeps you on your toes.

[@pwest3732]

Don't buy just one, buy 6 or 10 of them. That way you won't have to look for 1 there will always be one close by. Have had the decimal scales even back when I was in airframe and power plant mechanic. We used them extensively when doing sheet metal work on aircraft.

[@MetrologyEngineer]

1:39 lol I've definitely done that...

[@GOAP68]

Great video. Good to see Mark back in the videos.

[@imaamericangirl1406]

I so agree! He is great!

[@imaamericangirl1406]

He would be also be a great host on one of those diy shows on cable.

[@KPRTchannel]

Haha spot on with the rulers wide usage:-))))

[@HandsonCNC]

And here I did way to much math in my head.. I was just about convert my garage shop to metric because I was tired of the mental math... Ordering one now.. Happy Holidays all.

[@VId_Kok]

Merry Christmas Mark! You make the best videos on the internets!

[@xmaswitguns]

My machine runs in Furlongs/Fortnight and that’s the way I like it.

[@Swarfman64]

We love the Teryberry

[@mechmotion]

I’m the guy who has done all those things with his pocket scale. I also agree that the metric system is easier. Happy holidays!

[@fryer05maverick31]

Merry Christmas from North Carolina:

[@wayned1807]

A 6" Rule would be the perfect gift. But only if it's a Starrett. My favorite is the 316R-6

[@redsixonefive]

How’s the weather outside Ollie? METRIC!!!

[@新新朱]

Merry christmas and happy new year.

[@bobjimenez4464]

Good Choice, a machinist usually needs to have quick access to a scale . ***** A scale that is never missing ***** A scale one that is both rigid and flexible ***** A scale that isn't ever used because Statistical Process Control is in place.

[@MakeItWithCalvin]

Much as I need one I still have yet to grab myself one of those little steel rules. I loved when folks in the #instamachinist community would comment with the silliest uses they could come up with for one of those little guys but truth be told their just darn useful! Keep up the awesome work and have a Merry Christmas and a happy New Year =)

[@abcqer555]

Another great video. And I must say I can't wait for the day that America moves to metric.

[@kyleyoung2552]

This is great! The steel rule is the first item that came to my mind for a machinist gift. My 6" flexible steel rule lives in my shirt pocket everyday and if I'm ever without it I find myself needing it. Is it bad that I've used my rule for all of the things listed and then some?!?

[@ydna]

Freedom units? well so long as nobody tries to wrongly state that centigrade is metric temperature then I'll be fine. anyway I'm off to the store to buy a 2 liter of soda...

[@Madmaxx600]

Have a very metric Christmas. I mean merry! Merry....

[@imaamericangirl1406]

Love all your videos, Mark!

[@rogermuscat4198]

Merry Christmas & A Very Happy New Year!....

[@Shocker99]

Smarter every day has a video on Whitworth. The creator of the millionth of an inch measuring tool and the near absolute perfect surface flat

[@danielernestogomez8534]

La taza es el mejor regalo happy happy navidad

[@DaniloGamaCNCRouter]

Feliz natal.

[@robertr9138]

Sweet toolbox!

[@timothyvaher2421]

The 3rd eye of a machinist. Even a Euro model for metric. - Watchmen

[@Kosmonooit]

Big up for the Metric on the one side and the decimals!!!

[@vwegert]

Um. Metric Christmas everybody?

[@bostedtap8399]

That is a "Christmas Wish" Sir. 🎅. Though the USA does use the metric system where necessary, but at the time of the rest of the world adopting it, circa 1970's, the cost of doing so in the USA was prohibitive, and especially world economics. Thats my two penny's on it ( both duodecimal, and base 10).

[@wiplashw642]

Ummmmmmmmm I already use the metric system and I can't visualise in inches and feet

[@jeremyabbott5509]

I love this so much!!

[@danielmachado6750]

🌎Daniel Machado - Brazil🇺🇸🇧🇷 Feliz Natal HAAS

[@_P0tat07_]

I shan’t have my toolbox tainted by metric filth. It’s bad enough I already have a set of metric wrenches.

[@SergejKolmogorov]

Its the same problem in aviation, gliders messure the altitude in meters, and the general aviation in feets. Bad idea.

[@Dark-zm9hh]

I've been in the darkside, there are no cookies here..

[@tkzsfen]

there was a great video by veritasium about America actually being metric.

[@imaamericangirl1406]

Interesting, I may have to look into that . Thanks for post.

[@florianpohl3735]

Merry Christmas

[@SuperAWaC]

my perfect scale is a non-flex 1" decimal inch/metric scale with a half hook. unfortunately starrett doesn't make it.

[@sid1977]

The best gift is a calculator! :)

[@jantrzeci700]

Hello, I am asking for good Polish subtitles.

[@ender8850]

Merry Christmhaas

[@monglafrumog1902]

looking for apprentice in hass company

[@imaamericangirl1406]

Make a video resume and post here, maybe they will see it. :)

[@sethmarks2822]

Starrett C303R here. Tenths and 50ths, much easier to read than 100ths.

[@camprogramming2407]

Hi mark

[@safdarfarooque3489]

Hii Can we do honing on machining center??

[@TechTomVideo]

Metric Cristmas!

[@jackwillson8099]

I will not go too work ,we out ny scale 4R starrett 35 years works the best

[@Gboyer13]

I've eaten with mine when i forgot my spoon at home

[@ganeshpandi2666]

Hai mark

[@dwighthickerson4106]

So much easier to design with the metric system!

[@danielernestogomez8534]

Haas es lo mas

[@s9000x]

Merry Christmas all of you machinist. I have been a USA Machinist for 38+ years. The Metric system sucks. The greatest Manufacturing in the world comes from the USA. 4 place decimals. If you don't know thousands from tenths you're just a carpenter. No join US the great Machinist of the USA. Our Planes, Tanks, Cars the greatest in the world ever. Happy New Year.

[@simpo99]

Down under we work to 0.01mm but you lot working to one thou converts to 0.0254mm...

[@s9000x]

Yes you are correct Samuel and I can tell a very good Machinist also. Have a Happy New Year my friend :)

[@simpo99]

@@s9000x Cheers bud, you too

[@zyrdima]

С НОВЫМ ГОДОМ ! )

[@markterryberry4477]

S novym schastyem!

[@gateway8833]

Metrics is from the Devil, but it’s a lot simpler to use, but Inches was good enough for my Grandpa that always said “It’s about an Inch”, would have been nice to know the exact measurement.

[@HugoMak]

Haha decimal inches, more like metric wannabe

[@eddrm4685]

Merry Christmas and happy new year! Noooooooo metric please!

[@markterryberry4477]

Apparently, they laid out a 10 year plan to move us over to the Metric system. That was the 1975 Metric Conversion Act. I don't think anyone read it, we're all waiting for the movie. www.us-metric.org/ Merry Christmas Ed!

[@mreales4749]

awesome. metric for the win.

[@turbo2ltr]

In case anyone is looking for the one shown.. amzn.to/2EJQ7mK

[@markterryberry4477]

Awesome. That's the one. The last user-review actually says "A great way to stir ones coffee". Merry Christmas!

[@AATopFuel]

ROFL and NO! I will never leave my American 1/64 scale! Merry Christmas! HO HO HO, lol.

[@TechTomVideo]

yes you will

[@ramanak2213]

Merry Christmas from a metric Machinist..

[@SantaDragon]

Even in 1857 they were so intelligent that these inch dividing is bullshit. But I am glad to see that in the US everything take that long than her in Europe.

[@ramadankhateeb9032]

Merry Christmas ,,, hmmmm metric

[@Hendreh1]

Metric is best

[@andrevozkez3728]

Ничего не понятно, но интересно ;)

[@jameswilkes7824]

Can I get a litre of cola.

[@MetrologyEngineer]

A little late?

[@imaamericangirl1406]

There's always gifts for a birthday, Easter, shop teacher appreciation day? Is that a thing?

[@thenijni3018]

HAAS VF4SS

[@roninscholar4515]

really Mark? ekspecially?

[@EricB90]

This is a amazon commercial

[@imaamericangirl1406]

Hahaha, Haas should get some extra royalties for the mention, lol.

[@mattdroneon58]

If metric was from God there would have been 10 apostles. ;-) Seriously though we are so stuck in the English system due to availability of metric tools and it seems most of my metric tools purchased are junk. Will we ever fully move over... probably not in my life time. My lifetime may not be that much longer if Putin puts the magic nukes on us... just saying.

[@beachboardfan9544]

Woooo its Whitworth day! kzbin.info/www/bejne/il7bfnZ8hNyfoqc

[@loupitou06fl]

Oh yes please, metric conversion for the US of A - I'll be so happy to throw away my 1/4-20 screws and the non-sense 13/64th drill bits :)

[@vladiocy2884]

Metric system!

[@GuyFawkes911]

Yes finally change to metric! Metric Christmas every one.

[@coy3570]

Hah its time for Americans to switch to some real measuring system;Metric ,imperial days are over!