The Perfect Overland 4Runner Build Walk Around

Рет қаралды 19,043

DESTINATION JOURNEY

Күн бұрын

Пікірлер: 61

@rayandolina11 20 сағат бұрын

Just found this channel..really enjoyed the videos I’ve watched so far! 👍🏻👏🏻

@destinationjourney_overland 2 сағат бұрын

Thank you. Happy you're enjoying it!

@johnwebb2232 7 ай бұрын

really nice build and practical. this is the way i built mine, i have a 2016 4runner trail with kdss and it's all decked out for overlandding. you sure can't go wrong with a 4runner. keep up the great work and be safe out there.

@destinationjourney_overland 7 ай бұрын

4runners are the best (in my opinion). Thanks for watching!

@mikeklehr7105 7 ай бұрын

🤩🤩🤩 WOW!! You did a lot of work on your Toyota. I luv the way you explain what you did and why you did each thing. It makes understanding the total package of things working together. Great Video.

@destinationjourney_overland 7 ай бұрын

Thank you Mike! I appreciate that.

@jamesbispo391 3 ай бұрын

What a badass setup … 🙌🏻🔥

@destinationjourney_overland 3 ай бұрын

Thank you

@salegado71 6 ай бұрын

I like your set-up, it's very clean and not overly done. I'm new to overlanding and thank you for sharing your ideas, I have a Lexus LX 570 and I'm starting to slowly build it to be sustainable when overlanding or camping.

@destinationjourney_overland 4 ай бұрын

Glad it was helpful!

@lucasr5675 3 ай бұрын

Very very nice setup

@destinationjourney_overland 3 ай бұрын

Thank you

@NovaGraphics2C 4 ай бұрын

Great video. Thanks for all the info. I definitely plan on being a faithful follower.

@destinationjourney_overland 3 ай бұрын

Awesome! Thank you!

@MrJay27804 Ай бұрын

Could you supply links to the places you bought? Thanks for your modification. It’s really nice. Good job.

@nickromero8875 6 ай бұрын

Great work man, really enjoyed watching

@destinationjourney_overland 6 ай бұрын

I appreciate that. Thanks for watching.

@m.carter9090 2 ай бұрын

Perfect build - indeed!

@destinationjourney_overland 2 ай бұрын

Thank you

@90turbo300zx 25 күн бұрын

Nice build. Which model off hitch tire swing out is that? I dont believe it is in your description area. Thanks

@destinationjourney_overland 25 күн бұрын

Thank you. I made the tire swing out.

@jorgejelicic8525 4 ай бұрын

this dude is a genius!

@iamoutofideas13 19 күн бұрын

Nice build. That drawer system is professional level quality. I wonder if you could tel me what brand of power interrupt that is for your winch? I'm looking to install one, and that looked really clean.

@destinationjourney_overland 19 күн бұрын

The brand I bought is no longer offered on Amazon anymore. But just search for battery disconnect and you will see similar switches. I have a simple on off switch and I mounted it to a 2x3 in aluminum piece of angle iron spray painted black and then bolted that to an existing tapped hole in the side of the engine compartment. Hope that helps.

@IntoTheMystery13 4 ай бұрын

Wow! Well done! I'd love to see a whole video on the air compressor install. I have the same compressor and have been thinking about doing the same. Would you do anything differently? How did you make the bracket to hold it?

@TheWheelLifeChad 4 ай бұрын

Beautiful no frills overland build! I’ve seen builds with a billion and a half lights and everything else including the kitchen sink. I really love the idea of having everything you need plus a few little additional items. I’m actually about to buy a rig that’s very similarly setup. I’m pretty stoked on it. I WILL however need a rooftop tent and some form of awning so I’m definitely going to check out your recommendations on those fronts 🤙🏻

@destinationjourney_overland 4 ай бұрын

Yes, check out my video on the top oak rooftop tent. I’ve had it on a few trips now. I’m very happy with it. Also I have a video on an OVS 180 awning as well as another video featuring the top oak budget friendly 270° awning. Happy with both for different reasons.

@thomastorretto2772 13 күн бұрын

Thanks for the video and all of the great info. I assume those are OEM TRD Pro wheels (7” wide) No issues with the 285/70/17s as far as running aired down or anything else?

@destinationjourney_overland 13 күн бұрын

I have not had a single issue with these tires in the 4 years I’ve had them. This is my second set. I bought the 4Runner with 30k on it and the tires were half through their life at that time. Sit down great. Those are the OEM rims.

@austinm2032 Ай бұрын

Nice rig and video, what model 4Runner do you have?

@destinationjourney_overland Ай бұрын

Thank you. That’s a 2019 TRD premium off-road.

@douglasjuvinall3118 2 ай бұрын

Such a clean setup and also a GREAT video. Love the way you explained things, straight, to the point, just being you. I bought a Tacoma in 21 and semi regret not getting the 4Runner, not in a hurry buy might make the upgrade down the road. Question, sorry if you mentioned this in your video, but does the on board air have a tank somewhere or does it just run while you use it? Thanks and great job! subscribed.

@destinationjourney_overland 2 ай бұрын

Thanks for watching. No there’s no onboard air tank. The compressor just runs while I’m using it.

@patmoran3105 4 ай бұрын

nice build

@destinationjourney_overland 4 ай бұрын

Thanks!

@toyotaoforlando 4 ай бұрын

Love this! such a great build

@destinationjourney_overland 4 ай бұрын

Thank you!

@baldre3000 7 күн бұрын

In one of your previous walk-around videos you mentioned that the lift was a 3in Toytec lift. In this video, you said this was a 2.5in Toytec lift. May I ask what your front center hub to fender height is?

@destinationjourney_overland 6 күн бұрын

This is a 3 inch lift in the front. The 2.5 refers to the diameter of the shocks, which is a larger shock body than their normal shocks. It allows for more oil for better cooling. The front suspension is adjustable between two and 3 inches. Check out ToyTec for their boss 2.5 Aluma series.

@InGratitudeIam 5 ай бұрын

That is a nice setup. Quite often, when people get bogged, the rear of the vehicle is typically where the "bogging" occurs. When really stuck, swinging out the tire carrier and opening the rear door might become extremely problematic. You might want to rethink where you store your recovery gear. Behind the front seats might prove to be a better spot.

@destinationjourney_overland 4 ай бұрын

Thank you for the suggestion. I’ll give it some thought. Thanks for watching.

@blakedraughn2112 3 ай бұрын

With the Diode Dynamics SS3 fogs, which level did you get (sport, pro, or max)? Do you use them for daily driving as well? Any issues with being flashed? I just ordered some yellow max fogs from them for the hard cutoff but worried they may be too bright for street use and might have to return for the pro or sport. My issue with the pro is the cutoff on the top of the beam is not sharp and seems to have some bleeding light that could possible affect oncoming drivers. Thanks!

@destinationjourney_overland 3 ай бұрын

I have the sport. I only use them during rain, snow and fog and have never been brighted using them.

@peterolfert7477 3 ай бұрын

Great video! Where did you get that bracket for the battery disconnect (winch)? Pretty slick design!

@destinationjourney_overland 3 ай бұрын

Thank you. I cut off about a 3 inch piece of 2 x 3“ aluminum angle iron. Drilled a couple holes in it and mounted it to an existing tapped hole Simple as that.

@BryceBerry-w6e Ай бұрын

Looks like missing lugnut driver front.

@destinationjourney_overland Ай бұрын

You have a good eye. I had my wheels balanced and rotated at Discount Tire and they cross threaded the lug nut. I had to break it off. I replaced it later that week.

@DM-yp2fk 6 ай бұрын

Do you have a video showing how you mounted tent to prinsu rack? Thanks!

@destinationjourney_overland 6 ай бұрын

Here is the link to the video. Budget Friendly TopOak Rooftop Tent Install and Walkaround kzbin.info/www/bejne/bGmQlaupd7yMi9k

@billychristmas 6 ай бұрын

Can you share how you mounted the awning?

@destinationjourney_overland 6 ай бұрын

180 Awning Install on @PrinsuRacks kzbin.info/www/bejne/Z5WxgGCIebqgnLs

@destinationjourney_overland 6 ай бұрын

This video shows the detailed install. Thanks for watching.

@yourdailyblockchain 6 ай бұрын

Very cool. Curious if you went with the steel skids for protection vs. trying to save a little weight by going full aluminum? Thanks

@destinationjourney_overland 6 ай бұрын

Yes. I went with steel for more protection especially in the center of the 4Runner.

@ashresearcher 5 ай бұрын

Don't get aluminum. It can cave in a little on a jagged rock and get you stuck vs steel which would let you slide over things. Also, weight at the bottom is good for your center of gravity. That being said, if you won't do much offroading, the default engine skid plate the 4runner comes with is good enough for most occasions. You might as well save weight, gas and money

@playdudeguy7269 4 ай бұрын

Awesome build man! I'm wanting to upgrade my tires to those same BF Goodrich KO2 285 70 R17 on the same wheels. Did you need to do a BMC in order to fit them without rubbing?

@mcwendel8066 4 ай бұрын

I have Falken AT3Ws that are the same size on the exact same wheels and they only rub the body mount when I had wheel spacers on it. Without the wheel spaces, they did not rub the body mount. However they do rub a lot of plastic so I had to do some trimming. That being said, I dropped it off today to get a lift installed and the body mount chopped done so I can put the wheel spacers back on.