The problems with owning a old truck!

[@dominicgiannetti6562]

Best truck channel

[@Laynie_247]

Facts

[@adrathemetaloutlaw754]

Even with problems... Earl still sounds so good and beastly. And again...Doggos are a big plus to the vids.

[@666lame666]

You are the inspiration for upgrading my 91 gmc. Couldn't have done it without you and your videos. Keep up the good content!

[@egertonridout4102]

I believe that your wheel cylinder is trying to lock up. Also, it looks a little wet. They should be completely dry. Hope this helps

[@christianhughes9756]

I'm in Bama also, I just came across your videos... I have a 94 Chevy Z71. You're giving good info, I'm also going with a 4" lift. It gives me a good idea of what my truck will look like lifted, thanks.

[@bludragontruck9743]

My 2000 Silverado has a “check engine” light 💡 that’s always on. I wouldn’t trust it any other way 😁

[@Smallblockdaddy69]

Im willing to bet money the code is a "knock sensor" lmao

[@JohnnyReb2000]

"You can set my truck on fire and roll it down a hill, and I still wouldn't trade it for a Coupe de Ville," - Joe Diffie Enough said.

[@_mart_7183]

Amen to that

[@aspellisgaming1544]

You're the reason I bought wheels tires and a lift for my 98 f150 2wd!

[@domportillo9916]

I'm saving up to do the same! My dad gave me his old 2000 f150 last year and I'm finally at a point where I can afford stuff like this

[@cullenwilliams1695]

Why lift a 2wd it would be better as a lowered drift build

[@aspellisgaming1544]

@@domportillo9916 once I get my wheels and tires in I'll show you what it looks like.

[@aspellisgaming1544]

@@cullenwilliams1695 I was going to lower it but it's hard to find nice wheels for a lowered build on a budget

[@cullenwilliams1695]

Good point rough country prices are hard to come by when it comes to lowering

[@Cwis901]

lets goooooo! love seeing you post on youtube. gives me something to watch while im stuck at work. keep up the great work bro!

[@joeycomizio1675]

i love the obs content because i have one and i’m only 16 so i don’t have too much money to do stuff to it but also i’m swapping a brand new 350 in it currently so i haven’t been able to drive it in a while

[@doloriswhite7167]

same

[@elvisstarlord7121]

Young man that is outstanding to hear.

[@heybucko3956]

hoping one day my at4 will be featured here. amazing videos!!

[@davidanddiana7173]

Cool stuff man 👍

[@madshark2163]

When I first bought my OBS 97 Chevy it was doing that we had to replace the brake caliper

[@gassadually6879]

did you just leave the spider there????

[@lmfscrew]

Yep lol

[@edwardgalvan1672]

love the content man, I got a tundra myself

[@tg2963]

You need some venom power terra hunter tires for the rims on earl

[@jakeklotz7880]

that first issue could be your reverse adjuster or just from lack of driving your brakes will get sticky. have had both issues on my obs.

[@truittlynn5626]

my obs did that one time too and it quit and has been fine for months now never changed anything .

[@jimervin1637]

Good looking truck, even with loose steering. I have a similar '97 GMC 1/2 ton. Had to replace my tie rod ends too. They're good looking, reliable old trucks. But one thing I really hate about them is the amount of plastic that's in them. For instance, that lower valence strip under the grille. Give your bumper one love tap and you've probably cracked the plastic valence strip and maybe broken a mounting bracket or two on the plastic grille. And those valence strips aren't cheap. 80 bucks I paid for my second one. Too bad somebody doesn't make a replacement metal strip.

[@turbohead5612]

You should get a special set of wheels for earl like bullet hole wheels I had some on my red 98 Z71 and they looked amazing

[@jamesnolastname620]

Tie rod from what I could see looked ok it didn’t move BUT the nut that is suppose to hold it tight into the bracket looks shot and loose .

[@josegaucin6007]

Love the obs content!!! Wish you had a Tahoe tho I like your taste on style when it comes to dressing up your rides, my wife wants rims and tires on her Tahoe just don’t know what route I should take.

[@Blackocalypse]

@2:13 was low key cool as shit lol

[@SquareGoated]

U never seen it done before?

[@Blackocalypse]

@@SquareGoated I have but it never gets old to me lol

[@bigc43floboy65]

Love your channel

[@jeffambrose5244]

Those wheel studs 3:12

[@jackswan5640]

My fav vids are of Earl

[@raysprojects4956]

Does look aggressive with no bumpers

[@s.l.r.z.r.1810]

4:28 if you want check ball joint put something long under the tire and lift it

[@johnnyp5573]

Did I miss what your doing to the Trail Boss?

[@ScottyBeen1000]

LARRY! LARRY! LARRY!

[@DownYonderGaming]

I speak from experience when I say get a alignment. If the alignment was done with bad front end components it’s going to be off even if you put it in the same position. As for the brakes I’d start with cleaning the drum and shoes. If it happens again I’d go ahead and adjust the shoes on that side by pulling them in slightly

[@AndyDaClimber]

When you gonna toot earl?

[@nosmoke]

LOL - you call that an old truck? 1994 rust bucket here. i just discovered that i need a break job as i was exiting the express way at 70 mph. one year ago while it was on the lift getting new tires, the shop owner said not to bring it back because it is so rusted underneath that it CANT be lifted without the risk that if will fall apart. I guess i got my $1000. worth of use out of it.

[@tristiansharpe5152]

My trans on my 97 Tahoe blew last night doesn’t go over 35 no more 😂😭

[@Buddhalicious]

i have a clean 92 and had to do the same thing but also did cv axles and it wasn't fun

[@cristianmayen4736]

Hey bro I love the channel so I take my 2018 Silverado mudding, and I come to find out that the front left axle is kinda coming out of the boot. Should I worry too much about that?

[@CodyMullennex]

What size are your tires on the 18 inch rims ????

[@damienkuster3432]

Make another video on all vehicles and how much they cost and stuff that was a good video

[@fixingwhatihave2906]

Are those 20 inch 2020 Silverado rims?

[@cadenmoore757]

Ya gotta get a cab visor for lary or Earl they make the truck look so aggresive

[@JayHegwood]

Ok grandpa

[@buckskinz]

So you put the badging back on the trailboss?

[@kylechellino2579]

So I'm curious, how do you fit your truck in your basement? Don't mind me I'm kind of slow, does that mean your garage?

[@WBOS72]

Looks like you need wheel cylinders, not a big job. Get yourself a Motive Power brake bleeder and do a brake fluid flush while you are at it. Thank you.

[@redwolfmaddox3986]

Doing repairs is a common thing I got a 93 so I get it

[@urbanojuarez3268]

Where did you get your wheel spacers from? Thanks

[@jewllake]

just find a common point in the thread of the tires and measure front and rear straight across with a tape measure. The front should be about 1/8" towed in.

[@aidanmfowler]

Are they catahoula’s?

[@Fishing_4Wheelin]

Question what wheel adapters do you use?

[@danielgomez8187]

It’s the brake wheel cylinder you should just replace both side there very inexpensive

[@peytonromano4107]

Dude my 2008 expedition work truck had that same issue and it has mud grapps on it and they started to wear way worse than the others that was the only way i knew that there was something wrong.

[@michaelhowe9792]

My truck did the same all I did was pull the drums and put oil on the shoes and it fixed it

[@256life6]

Fill your jack up with oil and shell jack all the way up for ya again buddy

[@user-wf5ms7hv9y]

#obslife

[@charliesybert2683]

Just bought a 1986 toyota pickup 2wd and the brakes stuck and melted the grease out of the wheel bearings and still drove me it's parked

[@sixxgunz3774]

Put all the kryptonite stuff in it. Its worth the cost.

[@craigwarnke1715]

Wheel cylinder. Common problem

[@michaeljbaker3492]

You should have not cheaped out and only replaced the outer tie rods. Them old shitbox chevys are famous for one thing after another wearing out on the front ends. Every one I've ever had, once one thing wears out everything wears out. Just replace it all lol

[@Sloggett20]

I know the title says what it says but I would rather own an older truck because I can work on it these newer ones have so much technology crap in them I don’t know that kind of stuff I would like to fix it myself and save money

[@Charles3278]

I miss the Larry content

[@Idaugard5]

You should cut off the Muffler

[@lmfscrew]

It has no muffler 👍🏻

[@Idaugard5]

You should Cherry bomb on it

[@connorwoleslagle8804]

That’s the sketchiest way to jack up a truck why not put wood on top of the jack. Also if you can lean on the vehicle and it moves that much it isn’t stable, could fall of the jack on you. Wouldn’t see me getting under a vehicle like that.

[@ethanharper3185]

I live in Alabama we should hang some time I got a 10th get truck

[@levibalazs3775]

truck would be burnt down lol

[@lesleyunderwoodjr4914]

I want to get a sticker

[@gagehilliard8372]

First

[@BVALSProgress]

An* old truck