The Safest Way To Remove Cured Resin From Your Screen

I am sorry that i unable to make this The Safest Way To Remove Cured Resin From Your Screen video sooner, due to my personal issues.
But i hope that you guys find this video helpful.
kindly support my channel
/ dennyswang
Calibration Models
cults3d.com/en/users/krisn4li...
25% discount using my code : Dewa0310
for DM Stash figure at dmstash.com
Checkout Phrozen Website for Phrozen printer
phrozen3d.com/?aff=98
If you in Indonesia, you can buy Phrozen printer at tokopedia here :
tokopedia.link/I1hQGRPRpmb
If you are in Indonesia, you can buy NFEP at tokopedia here
www.tokopedia.com/yuishimokaw...
Chapters :
#3dprinting #3dprinter
If you interested to check my other work
Here my social media
FB : / nobodycustom
FB : / 3dmikron
IG : / dennys_wang
FB Group : / 373300934849501
Discord : / discord

[@HayashiKaiji]

Big wow moment here.

[@wangdennys]

Yep Super easy, fast and safe. 😆

[@ftumchgtumch732]

Instead of using masking tape, just pop down a set of trashed supports from a previous print. Cure these onto the blob with a shot of UV, the whole thing will peel off using the firmly bonded supports as a grip.

[@Alvaro-fh9gz]

Are you sure? My screen is covered in hard resin and I don't know what to do because the tape doesn't work.

[@ftumchgtumch732]

@@Alvaro-fh9gz alcohol/metho will also work, let it penetrate around the edges. BE GENTLE and let the scraper be the absolute last resort. Invest in a tablet screen protector that fits your screen dimensions. It saved my LCD from being totally destroyed.

[@CYMotorsport]

what do you mean a "shot" of UV? how? via what mechanism? that would be really helpful if you mean tank clean or what

[@napalmmachete]

Not all heros wear capes. A life saving technique, thank you

[@negativghostrdr]

Spiderman doesn't have a cape. Neither does Iron man, or Cap, or Green Lantern....etc....

[@theotherbart]

As always the simplest solutions are the best!

[@j4ym2]

THANK YOU SO MUCH! this saved me from having to get a new screen, i scratched it a bit using plastic scraper but hopefully ti wont affect prints too much. cant thank you enough!

[@trevorastin5896]

You are a total lifesaver!🙏

[@peterhilko917]

I agree this is the best way I've seen to do it. Never use anything but soft objects like microfiber cloths etc on a screen like this. I use a different kind of tape but good to know general masking tape works well too. Thanks for the video.

[@mrc8308]

Great advice as always!

[@samanthaknepper5963]

Hello, you gave the best advise I found on KZbin. This worked like a charm!!! Thank you for sharing.

[@wangdennys]

Thank you

[@martinsivertsen7485]

This is a great tip, thanks a lot.

[@ekrem06]

I thought there was a protective layer on the screen. Turns out there wasn't, but after a little hesitation, I noticed your video and after 7-8 tries, the method you said yes definitely works. Thank you very much.

[@wangdennys]

thank you for letting me know. i guess those that fail just dont have the patient.

[@junglebro]

ive just tried it and it worked!!!!!!!! Thanks a lot.. 😢 you just saved my $350. thank you!!!!!!!!!!!!

[@DC-xt1ry]

Thx for sharing! Awsome trick!

[@netnoob77]

Interesting technique. Will give it a go if it ever happens to me.

[@timothywood4402]

Awesome video, Thanks for sharing.

[@michaeltwalls]

Amazing. Thank you!

[@mrpotatohead34]

Holy wow, that worked! Thank you so much

[@negativghostrdr]

Great video! Thank you.

[@thomaswilliams5005]

Amazing. Ty for this.

[@Morten123DK]

Worked perfect to remove resin on the screen of my Phrozen Mini 8Ks after a punctured NFEP. Saved me fron replacing the screen protector - THANK YOU🎉

[@wangdennys]

Thanl you

[@CRClem]

I wanted to vouch also for this, I literally 10 seconds ago watched this video and it worked PERFECTLY. The screen has no scratches or anything.

[@wangdennys]

Thank you

[@Ronin_Dust66]

Was skeptical but dam worked like a charm ty

[@wangdennys]

Congratz! but honestly for some people it doesnt work, and i have no idea why.

[@prathamkshyp]

Thanks a lot sir...

[@Mrpurple75]

Thank you

[@gabtrabulsi]

Thanks bro

[@TheHobbySmith]

Awesome!

[@Jhoelgrox]

It Worked. TY!!!

[@wangdennys]

Finally, thank you for confirming. I am so confuse why it wont work for some people.

[@Shigeryu]

You save ma life ! 😅 Thank you !

[@wangdennys]

It works right?

[@justinspringer1762]

Amazing. You are a saint.

[@runklestiltskin_2407]

Awesome

[@LesWheelerBass]

This worked great!! I basically set my printer to clean mode, then took clear shipping tape and the glass screen is now spotless!

[@wangdennys]

Nice!

[@cameron7297]

So you put the tape on, then set it to vat cleaning mode to cure the resin onto the tape?

[@LesWheelerBass]

@cameron7297 , I set it to clean mode first...then applied the tape. You want the residual resin cured before applying the tape

[@ccarter1988]

Interesting. Gained a subscription from this at a minimum.

[@wangdennys]

Awesome, thank you!

[@TheIcemanModdeler]

Very cool thanks for sharing. I wonder if you could also pour a bit of fresh resin with maybe some supports the cure it and remove it from the support.

[@wangdennys]

Yes you can. But i find this is much easier. And less hassle.

[@wangdennys]

HOLYSHOOT!!!!! your profile pic is rendered image? i thought it is areal pic for a moment there!!!!

[@TheIcemanModdeler]

@@wangdennys Yes it’s a real-time character I made for Unreal, I’m a Senior 3D Character Artist, that’s a Hercules I made, you can see the animation on my channel.

[@wangdennys]

@@TheIcemanModdeler amazing!!!!

[@TheIcemanModdeler]

@@wangdennys Glad u like it.

[@eugenax9345]

Holy Moly :D

[@algernopkrieger7710]

Ugh, good to know, but it's a shame it comes just a few weeks too late for me! I accidentally destroyed my mono screen's polarizing filter cleaning resin, and after wasting money on replacement filters I got a new screen... Just yesterday... Oh well, informative and heloful as always, so thanks! I just wonder what the performanc eof tape is like on those very thin spills where it is almost like a film? Those are the hardest to scrape up, does tape work for those?

[@wangdennys]

Yep It works well for the thin film like. But might require repeated taping

[@algernopkrieger7710]

@@wangdennys Hopefully I won't need the tip, but thanks again for posting. You're the best!

[@sidar87]

I pray to the resin gods that my fep will hold for a long time. But this is an awesome technique. im assuming it will work with thicker cured resin too?

[@wangdennys]

yes it will

[@enginepy]

I have had a few resin leaks on my screens. None have come off using any technique like this. A nice thick round spill like your would but I’ve never seen a leak like that in reality.

[@wangdennys]

Let just pray you will never see more leaks.

[@neumann1940]

As for touching the resin with your bare hand, I think it's a bit over-exaggeration, I do not underestimate it because some people might have irritating skin but from my personal experience I've touched the resin by mistake many times, even 2 days ago a size of 2 full big spoons have fallen into my bare foot, I didn't feel anything just a slight feeling of heat and itchy feeling for about 10 minutes and all good! nothing was really awful , summary is do not panic if you touched uncured resin by mistake and take it with caution at the same time

[@wangdennys]

years ago when i first start, i have the same thinking like you. i don't even feel any itch or heat, nothing at all. it's like i am immune to resin. for years i am fine. but now after, touch a resin, and i will end up with itchy blister that wont go away for weeks. PPE is about preventing the sh*tshow.

[@neumann1940]

@@wangdennys I said don't underestimate it and don't panic , because some people are really terrified from resin printers because if this , that's the main point

[@wangdennys]

@@neumann1940 it is terrifying Not to mention the chance of getting cancer. LOL

[@neumann1940]

@@wangdennys trust me, most of the stuff we are already eating is cancerous, not to mention smoking and alcohol , I guess you can be a good marketer for resin printers by saying to the customer it is cancerous xD

[@wangdennys]

@@neumann1940 i do honest review, so i say it as it is what it is. Also it is a known fact and common knowledge. Hence need to keep reminding for ppe

[@FrankieMankie]

Would you use this same technique of you had a glass protector on your screen? I have a Mars 3 Pro and it comes with a screen protector... in case any of this happens to me, should I replace it? Or just clean it and I'm good to go?

[@wangdennys]

Hahahahaha yes, if the leak is not bad, and the screen guard is not ruin badly. This method works well.

[@Gijoeandstarwarsguy]

Hey Denys, in the past, I would put a few drops of uncured resin over the cured screen resin, then place one of my old model discarded cured supports into the drops, then cure it for around 30 seconds. Then the entire mess peels off just like your tape! Ever try that?

[@wangdennys]

Yep, tried it, faster with the tape imo.

[@richardcattafi1327]

hello,.....I have a phrozen mega 8k brand new.......anyway I had a resin spill and did exactly what you said using masking tape and I still cant get the resin off the screen.....what am I doing wrong ?......please help

[@3DJapan]

Masking tape didn't work at all, maybe mine is cheap. I tried duct tape several times and saw progress each time with a bubble in the middle getting bigger, aster 5 or 6 pulls it all came up. Thanks!

[@canaldaval8876]

Is it 002H?

[@tek9058]

This screen has a glas plate on top?

[@dbretton]

Will this work on large leaks? If not, what solution would you recommend for large leaks?

[@wangdennys]

It will Just take your time clean it well with ipa before apply the tape. And might need repeat the taping.

[@brandonstone7134]

Denny have you used the Phrozen resin cleaner?

[@wangdennys]

Nope

[@annagiladi3680]

Does this also work for fully cured resin that evenly covers the entire display?

[@wangdennys]

Depends on how patient you are working with the tape

[@Kimkim-gl6qc]

Already scratch the screen last night then found this video. 😅

[@Luisramirez-cn7hi]

😲🤯

[@wangdennys]

😎

[@pgabrieli]

excellent tip! why the worry about not touching the resin without the glove? the resin has been cured, hasn't it? anyway, thanks for the method, it seems brilliant. I hope I'll never have to use it! 😀

[@wangdennys]

I play safe, rather than deal with sjw 😆

[@pgabrieli]

@@wangdennys ahahahah!! 😂😂😂

[@joechimento7934]

if a print works and prints fine then you reprint it right afterwards and it fails and punctures tiny holes in your fep film, what in your opinion could be going on? the resin then gets on the screen and cures like this. but what would cause it to have punctures in the first place if the settings didnt change and neither did the files?

[@wangdennys]

Easy Fep can degrade. Raise exposure usualy fix it.

[@joechimento7934]

@@wangdennys thx for the Insight my exposure of normal levels or burn in? I'm using a m3 premium

[@dbretton]

I would suspect that small particles of cured resin are in the vat.

[@pitdusk8]

Well it's a little amount I have a really big leaky on the screen. And yeah it's cured

[@3diyfr43]

I must do something wrong here. Doesn't seem to work at all for me. Do you use a specific masking tape? Mine seems to be quite old and doesn't stick enough. I tried electric tape and didn't work either

[@flanker1659]

It's a scam, u can clearly see that he uses special tape but he mentions that anything can work

[@wangdennys]

Just simple masking tape

[@wangdennys]

Hahahahahahahahahaha The special tape is masking tape 🤣😂🤣😂🤣😂🤣😂 The cheapest brand that i have.

[@3diyfr43]

Well, I don't know how it'd be a scam, he's not selling anything. Ok, so it is not working at all for me. I'm using some IPA on it and scrap with plastic spatula

[@kuzmavolkov]

Man wish it worked. Had to just keep wiping with ipa every few light pressure scrapes with the plastic scraper.

[@wangdennys]

I am not sure why it works for some people, some dont. If you check other comments, some has success, but some dont.

[@B3D]

not working... i use tr300 resin ... soak ipa hot water aceton also not work.

[@wangdennys]

Interesting. I also found it is not working for some people. Maybe i do have magic masking tape 😅

[@Magyarkhan]

Not working for me too i use aqua 8k resin

[@daarionaharis3675]

Bullet Brand and Mach5ive hate this one simple trick.

[@wangdennys]

Well people better use them rather than use this trick 😅 Much safer to have screen guard

[@EricHockridge]

What if you have tiny little specks, I cant for the life of me get it off.

[@wangdennys]

It will work too In fact easier

[@no.1_2u32]

If your fep leaks from the edges you probably won’t get away with this method. GET PLASTIC RAZOR BLADES.

[@wangdennys]

Use whatever method works for you THIS IS JUST ALTERNATIVE Cause resin dont always leaks from the edges

[@no.1_2u32]

@@wangdennys You’re totally right, wish I would’ve thought of this before I scratched my screen with a real razor blade while I was drinking! 😆 True story.

[@wangdennys]

@@no.1_2u32 dont drink and drive and printing bro. LOL

[@no.1_2u32]

@@wangdennys 😂👍

[@drebelo02]

Didn´t work for me...lots of IPA, lots of cleaning cloth...nothing

[@carlosiyanaszca]

I have more than 1mm of resin on my screen

[@genin69]

this did not work at all

[@jakesells2379]

What. The. Heck.

[@figuresix]

Lol this didnt work for crap. Nice try but nahhh

[@wangdennys]

Of course it didnt work for crap. It is for cured resin.

[@23lkjdfjsdlfj]

@@wangdennysHahahahahahahaha!!!!!!!

[@wangdennys]

Got ya...

[@zerotolerancel]

Damn boy😮