The Secret behind white engraving on tiles and granite | Tips and Tricks for Laser Users Owners

[@rickieboyd5769]

great video! Do you spray on a clear coat afterwards?

[@Redmudmarine]

Very nice!

[@NehemiahSantaMaria-v9t]

do you engrave it a couple times or is it enough to go over it once?

[@katzendrama823]

What kind of paint is this?

[@melvztv6803]

hello. what pigment you have use for your final coating

[@simpatiko2k5]

We bought am 80w china CO2 almost a month ago but still haven"t use it cause we have so much large format printing right now. And still a newbie for using this machine. My question is how do you center your project logo on the material? Watching from the Philippines.

[@JimHaysTechGeek]

Absolutely Beautiful. Well done.

[@joehamblin3297]

Very nice technique, looks excellent. I'm going to get some smaller tiles and do some testing

[@LaserManiaOfficial]

sure, it is better to use high contrast I have also seen people using white tiles and paint them black

[@kri5tian406]

Would this work on marble if I had used a sealant after engaving? I'd like to apply the paint without worry about it seeping into the stone.

[@bektasarslan1187]

Kolay gelsin sürdüğünüz boyanın ismini ve markasini söylermisiniz tesekkurler

[@isenbergj]

What is the highest watt laser I would need to engrave on tile ?? I don't have space for a laser unit that size. Thanks. Oh ....That design looks awesome.

[@SSthis]

What kind of paint are you using? Beautiful etching

[@augustinekofiasante5216]

It's very nice and how much that it's cost

[@MakingwithMarilyn]

That turned out great! Thank you for the video.

[@LaserManiaOfficial]

thank you

[@sensei2203]

How do you make the engraving price or charge.? How you calculate how much to charge..?

[@rueletcobanez7432]

I like the machine for my business.How much is the price?And where can i buy the machine?

[@srflexthirumalagiri5033]

Hai sir what cemical used here

[@vas4uin]

At mm thickness it's engraving is?

[@kasasurik4863]

Sir, if the machine operates for the whole day and repeat every single day is it could damage the machine or not, hope you to share some information here couse i want to invest in this business

[@arvenaguinaldo7533]

what product did you use? the white paint?

[@ensambat4945]

What paint did you use?

[@RGCbaseace]

Super nice job

[@LaserManiaOfficial]

Thanks, I hope it helps

[@briankale7421]

LaserMania thank you so much. I am still trying to figure out how to engrave on hard granite, which do i select. Scan, cut or dot to do the similar engraving?

[@stacywilliams1624]

Turned out beautiful! Great tutorial. Yakoke!

[@LaserManiaOfficial]

Thank you! Cheers!

[@budmoore7971]

Good video. Thanks for sharing.

[@LaserManiaOfficial]

Thanks for watching!

[@LJ-gu2dj]

What a cool technique. Thanks for a great video!

[@sylvestremignot8269]

Hi! thanks for this ! I have a quesztion, what is the white material that you put on to ehance the contrast??? (i didn't guess)

[@LaserManiaOfficial]

it is acrylic paint, but try to get the one that is dishwasher safe

[@Tom-yr1mp]

I want to purchase a laser to etch photos on granite. I've never used a laser etch machine before. Can you recommend one for me.

[@frederickacker5379]

Beautiful Tool! I'd LUV To Know How Much Does IT Cost Plz???

[@randysarmiento8842]

what is your setting sir im using 300w laser but i cannot get the correct settings for granite engraving.

[@kevinm3751]

Awesome laser... someday...;)

[@jameskonstantingalvez9202]

Is it ok to use same acrylic paint for portraits on granite lapida?

[@TheDwilliams1000]

I have a k40. Could you do slate and what kind of paint should I use to color fill with?

[@LaserManiaOfficial]

that is a hard question, slate is a natural stone and it is not polished (as granite) no if you apply paint it will penetrate the non lasered areas as well, I see only 2 options now, either do not apply paint or apply a strong masking that will stay after applying paint and then remove it. I hope it helps

[@carlosalegre3139]

Very good Luis

[@LaserManiaOfficial]

Thanks

[@gorodph]

Absolutely beautiful. Greetings from Slovakia.

[@rickmccaskill7888]

How did you spray the paint on the tile? I assume the tile was white? Thanks for showing.

[@timothymusson5040]

That’s a black porcelain tile

[@LaserManiaOfficial]

I use acrylic paint, and I simply pour a little and I spread it with a rug after a few seconds I just remove it quickly, it will only adhere to the engraved areas

[@tdots_finest9894]

Is this the same for glass or is it different

[@RED_EYES11]

what model and where can i buy this engraving device?

[@jamesnichols9592]

You got us hooked on great training videos. When are you coming back and do more?

[@jayffeefernandez59]

Boss ano pp magandang laser para sa 60x60 sa lapida

[@melchiadesrommeldy3367]

Hi.. where can i buy the laser machine?

[@LaserAnia]

I have a 40W laser and tried to engrave a portret on granite. File was .bmp which my laser is also using. I wad surprised that laser started to engrave versa colors, like black areas on original portret white on granite. I did not inverse image before engraving. Do you have a solution for this? Thank you in advance By the way, I tried your trick with acrilic paint, it is so usefull, thank you very much!!!!

[@kimmaceda9250]

Sir, may i know the wattage of your laser machine? It's really nice you could engrave in granite tiles. 😊

[@LaserManiaOfficial]

I have a 100w machine but I can also do it with a 40W machine

[@MrHighvolt]

@@LaserManiaOfficial so, 50% power and 300m/s on that 40w machine?

[@Classic461]

Really liked this one

[@LaserManiaOfficial]

Thanks a lot for your support

[@diannajowers2906]

Great video! Question, after lasering the granite, does it need to be sealed if it's going to be outside?

[@cocoyreyesvlogFrancoDelosReyes]

Sir how much the cost of the machine?

[@steriltech63]

That’s is awesome 😎

[@SWIFTY5150]

What brand, wattage and type of laser is this?

[@3DJapan]

Is this a seal on the ground that people will walk on? I'm afraid their shoes would tear up that paint if it's not sealed or coats worth something.

[@joshjon8118]

What type of machine is that? Is it reliable?

[@darrylbungabong6084]

Sir San mpo nabili yng machine nyo.?

[@joshuelicasartscrafts1250]

What is the laser machine watts power?

[@saievlogs4348]

What colour we should use after laser engraving on stone or tiles sir please send me colour bottle name

[@TheDwilliams1000]

What do you use to prepare your photos to be lasered?

[@LaserManiaOfficial]

Photoshop, the key is to make high contrast images (whites whiter and darks darker), then a little trial and error to adjust the power, there is no magic number nor ONE SIZE FITS ALL, but once you get used to it you can predict: this picture will look better with low power, etc, etc

[@manikandanmuruganantham4683]

For colouring white, which material added?

[@judymccune8275]

are you in oklahoma? im in Owasso...

[@grbr1974]

hey ..i would like to learn more...where are you located

[@LaserManiaOfficial]

I am in FL, no worries we will publish more videos

[@brew0498]

@@LaserManiaOfficial Thanks for the video, where in FL? I am in Broward.

[@edford2171]

What resolution settings ?

[@WilliamBlakers]

What power is this laser tube please?

[@LaserManiaOfficial]

I have a 100W machine

[@Cambium29]

Good video. Thanks.

[@sundeshbalraj]

Looks amazing

[@jofloresz]

Can you use thicker material like a grave stone?

[@norteezapparel2395]

What liquid did you used

[@agustin-tochimani]

Nice video What kind of machine is that?, price range? Thanks

[@LaserManiaOfficial]

it is very affordable, under 9K I am sure but check with camfive please

[@maritimemongo01]

Looks great! I love our nation's seal!!

[@EdwinGarcia-h2m]

Name of the paint sir

[@iamzombie76]

Do you use a battery back-up on this machine? Seems like it'd be a pain in the butt to have the power go out part way through a job. Love the video by the way! I'm jealous!

[@LaserManiaOfficial]

thanks a lot, I do not use a battery backup, yes it took a little to do the whole thing but I normally do not have power problems so it rarely will turn off in a middle of a job.

[@mcreynoldsmc1100]

This is granite stone or tiles??

[@dennisrara5892]

Hi gud day! Sir whats the brand of your paint & how much cost of your machine? Thanx

[@LaserManiaOfficial]

Any acrylic paint will work just make sure it is dishwasher safe, about laser machine cost, prices have change now from the time I bought it, however prices depend mainly on the wattage and work area, and you should keep in mind what you are going to do with it so you can narrow your search down to a fewer machines

[@maricelpaglinawan6652]

Sir how much this machine

[@ezridaeus]

Do you use that nozzle to protect the lens from the bits of tile that "explode" off of the surface when the laser hits it?

[@LaserManiaOfficial]

correct, this material does not melt and does not emit fumes on the contrary we need the the bits of tile out of the way as soon as possible

[@3187rakkasan]

Let's say that tile is installed in the floor of a building. Will the paint come off when the floor (that tile) is cleaned, mopped, buffed, etc? If so, can the paint be reapplied at any time and bring the contrast back out? Thanks!

[@LaserManiaOfficial]

If they use some abrasive cleaning procedures, eventually the paint may come off (not completely) but you can definitely reapply it, also keep in mind that even if the paint come off the engraving itself will NOT so you will always have the tile engraved.

[@DerRespektph]

Is your level out of focus? Great video by the way!

[@noelflores8989]

Is this a CO2 laser doing this engraving?

[@armusaofficial]

Hello. do you have any idea po about those models na mahaba laser nya? unlike sa inyo isang laser head lang

[@egorkusnezov]

Это керамогранит?

[@markrumrey790]

where did you get the material your engraving on to?

[@LaserManiaOfficial]

I have multiple providers for different things, I got this material from THD or Floor and decor

[@sebastiangalli864]

Tienes un email para comunicarme contigo desde Argentina?

[@theadriansilva2647]

Hi! Where do you get your granite slabs?

[@LaserManiaOfficial]

you can get it at any tile and floor shop, I have seen it in Home Depot, floor and decor, etc

[@makietechreviews]

You didn't say what kind of paint you use

[@iq0099]

Air flow, you want more on the surface, right?

[@LaserManiaOfficial]

right, that way it will push all dust away of the engraving

[@SlingShotNinja]

Wow ! That laser must be very expensive but worth it

[@matthewborg94]

You can get a 80watt for 2k easy. This is a 100watt tho. He said u can use a 40w machine and do the same thing as well

[@epedja]

What is the secret ingredient that helps removing paint?

[@LaserManiaOfficial]

chemical formula is H2O ;) you can apply a little water and remove paint before it completely dries, once the paint is fully dry (it may take one day) it will be hard to remove from the engraved areas

[@BC5391]

WOW!!!!!!!!!!!!!

[@LaserManiaOfficial]

I know, right?

[@leopoldoadim3185]

boss how to put paint on white tile

[@LaserManiaOfficial]

you can use black paint and do the same procedure

[@ericwilliams2122]

maybe oil paint will work better as it won't dry on you?

[@LaserManiaOfficial]

yes, may work better. i guess it is also water proof. if you try it let me know.

[@generalawareness101]

After spending over a thousand hours and 2 grand I gave up and my laser has sat there for 2 years now. I just never could get it to perform right.

[@LaserManiaOfficial]

really?, what was the problem, what brand is it?

[@generalawareness101]

@@LaserManiaOfficial China blue from eBay.

[@vivekanand3938]

@@LaserManiaOfficial which size tile a maximum can I engrave with that machin

[@atchutaramayyajagata1114]

Adras please

[@dejandenih1101]

Put niksion (glue) and pouder paint on it. You get beter results

[@flufygrowth]

dude you gotta turn off some stuff so we can hear you talk

[@LaserManiaOfficial]

JAJAJA, thanks for the advice, I guess I will have to get a mic, I know machine is loud, and I think the Lawn crew just got there when I was doing the video, thanks again

[@TheFalconJetDriver]

LaserMania _Official the noise is the music in the background.😁🛫

[@Deliciouspost]

for full video kzbin.info/www/bejne/q4GXeYN6bLxmmqs

[@michielvannoppen9581]

You think the white stuff would also work on this fast laser? kzbin.info/www/bejne/al6QgqOwfLGMqtE

[@TheFalconJetDriver]

I hate to say this however the music in the back ground is too loud and not necessary, thanks for sharing the tips 😁🛫

[@LaserManiaOfficial]

Jajaja, I will keep that in mind, thanks

[@ToddMoore1]

Way too much footage of the laser going back and forth... I fell asleep

[@LaserManiaOfficial]

sweet dream ;), thanks for the feedback

[@ouroboros5378]

Tirate uno en eapañol pues! Jaja

[@maikomefarishvili7724]

Ra girs