the simplest CNC PEN PLOTTER, how to use it

[@DAZprojects]

The config files have unfortunately been lost, I'm sorry for that inconvenience but i can't do nothing to recover them.

[@omeryldrak4709]

kzbin.info/www/bejne/d5qakHSsfr57kMU

[@shantilkhadatkar1195]

Which source you took help to get them. I will try recreating them.

[@elianovia3256]

We need config files

[@shantilkhadatkar1195]

@@elianovia3256 Got it! If you pause the video at 1:40 you can see the configuration and dont need to setup your config file. Only problem is you will have to do that each time but it should work

[@orlandolopez9136]

@@shantilkhadatkar1195 the configuration are the numbers that appear in the tab of input and setup?

[@yb4347]

Hıı David! configuration file link not working :(( can you upload it again? Thanks

[@miguelangelriosbermudez7216]

hi, the configuration file is not there, can you send me please?

[@madrynchubut]

Hola, el proyecto es muy interesante. Gracias por subir este video explicando la configuracion.

[@nekoppai7398]

The configuration file isn't in google drive, i tried to making my own configuration file based on the video but i can't, have someone the original file?

[@FelipeSilva-ld3gr]

I need too

[@omeryldrak4709]

yapabildin mi

[@syedsulthan8236]

bro config file is empty what to do now

[@erickanthonymenendezcacere1503]

Hi, I would like to know if you used a calibration or configuration in your stepper motors drivers. Please, my motors aren't running.

[@SimpleMP]

same, but probably it's an error with the software

[@SimpleMP]

hey bro, literally i solved it rn, if you want help just say it

[@senjalaran9387]

Hi man can you help me? Pls answer me, i need it as fast as you can😢​@@SimpleMP

[@yatins1415]

Hey Please reshare the configuration file, because the old one has expired, Thanks and this is a lovely project

[@flaviusmuresan8842]

Hi agaain! An error appears on the right side of the commands that says: E06: This point falls outside the area of this machine. Skipping it and my stepper motors are not moving. Can you help me?

[@flaviusmuresan8842]

Again*

[@DAZprojects]

Try moving the pen closer to the path you want to draw (do it with the software)

[@flaviusmuresan8842]

@@DAZprojects ok. I will try…

[@gabrielh.luchtenberg149]

I had the same problem. I tried to move the pen closer to the drawing there in the software, but it didn't work, because everything remained stopped. Would there be any other solution to this problem?

[@msrlady3025]

@@DAZprojects so where is the code.

[@mohsinfayyaz3056]

Bro the config file is empty kindly re-upload

[@diogolima8339]

i need it too. pls someone send it to me. thanks!

[@Userlol.]

Solved?

[@calebcoetzee5131]

Very cool !

[@caiorocha1587]

Hey! The config files still lost? someone have it to share ?

[@hebertigomesdemello696]

Is possible to use *.PLT files??? (HPGL Plotter File)

[@Nacho-h1n]

This is my robotic proyect

[@KhushiGadataranavar]

Plz send the video on circuit diagram

[@cyberlaurent2101]

Bravo !

[@עידןקרבציק]

Hi, I love your videos . How I cen send g code commands by hand?

[@עידןקרבציק]

Can I do it via serial monitor?

[@armin7895]

the configuraton file is not working

[@shantilkhadatkar1195]

Just see the video at 1:40. Manually do the configuration and voila! It works. It's a bit tedious but will do the job

[@trevorb509]

@DAZprojects , Can you send me the config file?

[@carolinac233]

If you pause the video at 1:40, you can see the configurations on the left side. You will have to do it manually.

[@trevorb509]

@@carolinac233 Do you know how to change it? I tried to click on it but it won't do anything.

[@carolinac233]

@@trevorb509 drag it up or down, i think it should work

[@trevorb509]

@@carolinac233 I have tried. Nothing is working. Do you have a video I can reference to?

[@carolinac233]

@@trevorb509 no, sorry. i tried on my pc and it worked

[@adithyanmnair5899]

bro can you explain me how to do it coz i am planning to submit is a project please

[@DAZprojects]

sorry but i didn't understand what you want

[@adithyanmnair5899]

@@DAZprojects hey man i want to discuss this thing how is it done

[@adithyanmnair5899]

i want the detail what all stuffs we should buy for this can i get ur number

[@DAZprojects]

@@adithyanmnair5899 you can find all the details on how to build it in my last video. I don't have a part list, but you can find all the parts you need easily on Amazon an at your local hardware store

[@adithyanmnair5899]

0:54 bro in my documents its showing only arduino data this processing thing is not there

[@DAZprojects]

If it isn't there create it

[@adithyanmnair5899]

@@DAZprojects bro for testing the dipole motors i plugged them into cnc and tried to wrk it but in processing software it is showing this point doesnot falls in the machine

[@danielscosta]

Someone get the configs? :/

[@adithyanmnair5899]

bro where is this ac adapter used