The Thermaltake P3 TG Pro Ultimate Review: Handle High End CPUs Like A PRO

[@WSS_the_OG]

Been running the original P3 for a few years, and dust isn't the issue I thought it would be. Being "open" does mean plenty of fresh and ambient air all the time, which also means lower fan speeds. While you'd think being so open would be loud and dusty, it's really not that bad. But this would depend on how dusty your home is, of course. This isn't a good case for people with multiple cats or dogs, for example.

[@Joyride149-1]

I have run the p3 for over 5yrs, dust never an issue. Currently trying to use the P3 Pro to do dual 420 rads, custom loop, pain in the arse. Will be good when complete, but hard to set up.

[@gmoddude12]

I also feel like it being very open makes the regular Quick cleanup pretty easy Just get something to blow any dust that May be there off and you Can do it with little removal of panels

[@KikoCCID]

I got 4 cats. Rocking the new tg version of the P3 without any problems. It's wall mounted and pretty high, this helps a lot too. But yeah, dust collecting is not as big of a concert as I thought and it being so open it's pretty easy to clean even without taking off the glass. I just love it!

[@Mauwe]

The sound track showing off the case went sooo hard holy cow 🔥

[@charlesgray6703]

Thanks so much for this video! This short little video really answered a few of my questions. I'm getting ready to buy this case, and then mount it on the wall, behind my TV. Going to look fantastic! Thanks again.

[@Aus10j4d]

Would def be interested to learn more about fan placement/cooling design for open cases like this

[@gregorywilson1208]

I love this series of cases except for the new base. The feet on the original gave it a great floating look for on a desk but an even better look when the feet were removed and the case is wall mounted.

[@hyperstimmed]

opposite opinion here.. I thought the feet looked stupid like the new one a lot better

[@HuntsChris]

I’ve got this case, it’s very well designed, but they should have provided (or make available) a second radiator/fan frame so you can mount a rad on top, a distroplate on front and fans in the recess where the magnetic filter is. As it’s configured in the video I don’t think there is much air passing over the motherboard which is creating a bit of a dead spot for air movement, but I guess the temps don’t lie. I agree totally about the manual, it is junk. Additional grommets are not available (odd size openings) for the cable openings so neoprene foam sheet, 1.5mm to 3mm thick stuck to the back of the mounting plate will do instead.

[@N3woise]

the temps are high or am i wrong? 84°. how did you arrange your aio?

[@itsJoshW]

My guy, my Halo guy (Who I use to think you would be discussing Halo stuff post launch but lol). This is the review I was looking for. So backstory: Take a look at Peter Brands / L3P. Way back, he used the P5 to build a unique Desk PC with it. I was looking into upgrading my hardware finally and thought of that, which I already built a Desk PC of my own. I'm going to take two of these cases, fabricate up some simple wall mount brackets out of steel, and wall mount two of them with a sheet of glass on top. Thanks for this review! Needed to know exactly some critical and unique thoughts on it, as I'll be using this as a ground to build off. I'm loving the modularity of it. Means I don't need to sit there and metal fabricate (by hand) all the stuff again like I did with my old desk build 10 years ago lol.

[@techman8336]

I have this case and its awesome! Easy to build in, highly recommend this case. 13900k Asus z690 HERO, Corsair dominator ram 32gb@5600 Corsair H170i 420mm rad 6 Corsair QL 140mm fans Asus Thor 1200 watt PSU Lian Li 24 pin and 3-8pin RGB cables Asus Strix OC 3090 GPU 1-Samung 990 pro 2-WD Black SN850X 2tb

[@Aus10j4d]

What arrangement are the fans setup with?

[@techman8336]

@@Aus10j4d I have 3 ql 140mm fans on the rad mounted in the recessed area and 3 ql 140mm fans blowing in from the side

[@ghostplyr6346]

Can’t find a video with this case in horizontal orientation. Neat Case though! Was thinking of grabbing the new NV7, but this case is super interesting.

[@spiceoflife4677]

Seriously thinking about purchasing this case. It's a rap thanks to your video. I will be buying this case.

[@PharaohofVibes]

Case is actually sic!!! love the design. Aren't tubes up on an AIO the least optimal setup and causes issues further down the line?

[@RobeytechLive]

Nope the pump is not at the top of the loop so zero issue

[@a.g.jordaniii5025]

Case is awesome looking, but I live in a house that gets dusty fast. Would be cleaning it weekly lol.

[@CrisIsBored]

bro i want to see them closing the hole while using a mini itx board, and make the stand easier to clean from dust.. less surface area where dust can accumulate and hide.

[@Betonoszlop]

Finally a proper review, cheers!

[@Shade_1111]

Great video. Do you what the dimensions are for the wall-mount configuration? I have a custom mount requirement and want to know if it comes in under 19 inches when you remove the feet.

[@djtechno95]

5:28 - RTX 7090? That won’t be available for at least six more years!

[@Jason_Bover9000]

Its really cheap

[@t.el.]

Do you think the temperatures are better if you put the "fan bracket", up and not in the front?

[@N3woise]

Nice case. Is it loud?

[@nachovidal4047]

Could be upside down, installing the base on the top of the case?

[@Jason_Bover9000]

This case is awesome

[@superfly4137]

why there isn't a top to this case is wild.

[@KaozTv]

How did you get RTX 7090?😮

[@woody1980]

can I find an additional fan bracket ?

[@IamY00t]

People who claim dust. Yeah, its not really an issue. A regular sealed case with positive pressure gets a lot more dusty over time than this one does.

[@mossivichgaming3606]

Will that fan bracket fit the original P3?

[@t.el.]

Is a push-pull configuration possible?

[@RobeytechLive]

The radiators for these are two thin for push pull

[@t.el.]

@@RobeytechLive i have an artic freezer 420mm ist pretty big Could ist be ok for push-pull?

[@Moshington]

@@t.el. push-pull should work if you use the bracket for front mounting.

[@t.el.]

@@Moshington Radiator in the back and bracket in the Front 👌

[@napoleon-sk5oc]

Since I got the P3 I do watch these videos. In fact I watch these instead of movies.

[@arqist]

can you fit two 4090s ?

[@Hellwalker855]

If your board supports it. Yes.

[@GeraltOfRivia99]

Still like the origonal much better. the front bracket and different coloured glass with the goofy new base support is a no for me. hard pass

[@DethNade]

at 5:25 whats a Asus tough gaming RTX 7090 beefy boy????

[@RobeytechLive]

A mis statement ☺️

[@84Actionjack]

Mounted an earlier version on mobile TV stand.

[@youngtuna2385]

id like to see how much dust it accumulates over time lol

[@babylorvbeats]

I have it and it doesn't pile up dust that much to be honest. the only place I see dust is the fun of cause and that's pretty much. The GPU probably has dust but my temp is always low

[@mboiko]

Worrying about dust...Then plug a $100-$150 HEPA Air Purifier in the room with the case and then once a month use an electric leaf blower on it.

[@ZeusWRLD999]

800 views on fking 260k sub???

[@RobeytechLive]

Welcome to the Algorithm 😀

[@KillerPojo12]

yeah wait what ? this case deserves way more attention in 2023. its unbelievable.

[@guilherme5094]

👍

[@mcalin5931]

Cons: AIO can only be mounted Hoses at top of loop because no AIO manufacturer makes the hoses long enough to be at the bottom of the loop. This case is designed for custom loop using hard line tubing, who builds with an AIO in this case!

[@Zakori]

Hoses should not be at the bottom it’s not good for the pump

[@j_shelby_damnwird]

D U S T

[@PateYEditz]

Day 1 of asking for a AMD Radeon RX 7900 XTX

[@sayaato6721]

Ggbro

[@lifebidesign]

DUST MAGNET 🧲