The Truth About Cheap Motorcycle Levers | Sportbike Track Gear

The Truth About Cheap Motorcycle Levers
www.sportbiket...
There are many places to save money on your track bike but levers, and any of your controls in general, are not one of those places. There's a couple of things on this motorcycle that if they let you down, if they fail, if they're a poor quality or poor design and there's an issue with it, you could have a really big problem that could cause serious injury or worse.
This all started when one of our good customers purchased a set of Spiegler brake lines for his 2017 Yamaha R6. He watched my kick-ass install video and installed the brake lines on his bike, went for a ride, and the brakes locked up on him. He left a comment on the install video for help on fixing the problem. After reaching out to him, we were eventually able to determine the cause of the problem, which were the cheap aftermarket levers he installed on the bike. He agreed to send the levers over to us so we could get a look at them.
This video isn't an ad for CRG, we just want to point out some of the differences in a quality name brand lever versus a cheap no-name lever that you find on eBay or Amazon. Let us know what you think. Tell us what kind of levers you use, and if you've had any experience with any of these cheep levers.
Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions call 888.784.4327, send an email to [e-mail] or leave a comment. Don't forget to subscribe!
/ sportbiketrackgear
/ stg_moto
/ stg_moto
blog.sportbike...

[@mikefandango3343]

kzbin.info/www/bejne/nZ6yh6OqebyGhqc this shows what happens, thanks for the info great video .

[@sportbiketrackgear]

Sorry to hear you crashed man. Thank you for taking the time to share the video, this will help others (well at least the ones smart enough to understand we a just trying to educate them) from having a similar experience. - Van

[@mikefandango3343]

Sportbike Track Gear Sorry I don’t want to mislead you, it wasn’t me in the Video. It belongs to someone called Cory. He put up such a good description of what caused the crash and it’s basically what you are stating! His and your video has stopped me buying cheap aftermarket levers.There is also a crash of someone on a track day, in the UK going flat Out, the front wheel locks and he totals the bike but walks away.If it had been on the streets I’m sure he would be dead.

[@ryanzepp9185]

Lol that dude just grabbed the front brake riding one handed

[@surronzak8154]

@@sportbiketrackgear So must this thing move or not, the guy in the vid says he crashed because it was moving ..

[@bobbymalta73]

Thks For Sharing mate!

[@blue03r6]

your shirt must have high quality buttons

[@frankgonzales7923]

Lol

[@declanmoran1894]

😂🤣😂🤣

[@tomdickharryjane]

HAHA!!!

[@maximusmax4557]

Don't sneeze.

[@queenbee7074]

Bahahhaha stop it

[@BustahNutt]

I’ve never had 1 single issue from the eBay levers and I’ve bought like 3 sets for my R6. The only downside is that the black fades into this gold-ish color. I won’t be suckered into spending $100+ for some levers. They shouldn’t cost that much. Everyone has different experiences and opinions about the “good stuff”. I’ll stick with my eBay levers and spend the $80-$90 I saved by not buying ASV levers on something else.

[@user-cg9vp9bf5d]

yea, something else like your hospital bills once the lever suddenly stops functioning

[@BustahNutt]

Xta-C Dummy. They work fine and will continue to do so.

[@user-cg9vp9bf5d]

And that was the last thing RAD Chili ever said before he ran through a busy intersection and got trampled by a semi. According to authorities, cause of fatality was traced down to brake failure.

[@robzillagarage]

@@user-cg9vp9bf5d I'll just tag in.. I have these exact levers in the video and unless theres a new design they dont have this problem his speaking of.. no binding the pin lock thing his talking about is free an loose...

[@Csikter]

@@robzillagarage but now we know what problems could arise from the Chinese levers. Only thing that needs to be done is test it out and see if it binds or not. If it does, tell the seller it's crap and you get your money back (if you buy it on aliexpress). No harm done. You can do this until you get a fully functioning one. That's it.

[@bretgin]

Thank you for putting this out there. My front wheel almost locked up after installing a set of these cheap levers. There are videos on KZbin of crashes caused by these levers. Not worth it. Brian is spot on.

[@sportbiketrackgear]

You're welcome and thanks for watching! - Van

[@christopherdonlick9119]

if your brakes locked up after you installed aftermarket levers, its probably because you installed them incorrectly.

[@A_Pt_9298]

I've installed cnc levers from China on my gen 1 fazer 1000, not an ounce of problems at all, and as to the allowed movement of the pin on the end of the clutch and brake cables, I've messed around with bike ones, they don't move, they're not supposed to move, why would you want them to move??? That's just gives another strain point on the cable, it needs to be rigid

[@alejandrotobienne8220]

Your a moroon You have to grease these period you also have to tighten the Allen and bolt to desired tension.

[@alejandrotobienne8220]

@@christopherdonlick9119thank you these morons

[@thelikeablerider8800]

Great that you let people know this issue! Makes you think twice and spend a bit more for quality

[@waterhouse235]

Never had a problem with cheap levers, had them on about 6 different bikes! And will continue to buy them

[@thepanman8]

Me too dude. I actually just bought a set of the mzs that he discusses first, and i love em

[@tooljunkie555]

I bought the blk& red "ride it" levers and outta the box the blind hole for the pin was "loosey goosey" there was SOME play all I did was tighten the nut on bottom a little and slapped a little grease on it good to go and the shorty size was a little longer than rc2.but other than that they been good to go for 6yrs now.

[@bootz0409]

I'm rushing out to check my aftermarket levers. This vid has put chills up my spine. I am usually extremely safety conscience yet how could I have allowed myself to be so trusting with the quality of so critical a product. Your vid is a wake-up call for me. And potentially a lifesaver! Thankyou.

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@barrywood8838]

Dont be a pussy

[@swatz22]

I respect as a businessman for actually caring for your customers and looking up someone on KZbin that ordered something from your website and you were able to reach out to him and resolve his issue!

[@sportbiketrackgear]

Appreciate that! - Van

[@MasterGuil]

What I like about this channel is not only they give you advises, they also show you why. Thanks!

[@sportbiketrackgear]

You are welcome and we appreciate your support! - Van

[@evildead5843]

I have MZS levers on my bike and had them on my previous bike. You do have to check that bearing on these cheap-os. Thank you for spreading awareness of a major safety issue. Having never been exposed to the higher end product I never knew what that extra money was buying. I will keep a closer eye on my MZS levers and add better parts to my Christmas list.

[@phantombigballs8165]

Remove them immediately had this happen to me on shit levers

[@R1Ammar]

I appreciate you taking the time out to do this and looking out for fellow riders!!!

[@sportbiketrackgear]

Thank you for watching! - Van

[@rayromero6891]

Dude, this video helped me heaps. Love the channel and always learn something new. My brakes locked up as you have described and after tons of money spent and time looking for the boogie man, it was the new lever i had installed. All the best!

[@sportbiketrackgear]

Happy to hear this helped you sort out the problem. This is the reason we made this video when we helped one of our customers solve his brake locking issue. - Van

[@del80y]

Can you make a video about wearing the correct sized clothing :D

[@sportbiketrackgear]

I am giving you a great example right here man, you're welcome!

[@vladbpootin3122]

That's a race fit shirt, nothing wrong here 😂

[@baldilocks1914]

Ha!

[@rutvijsonawane8597]

@@sportbiketrackgear 🤣🤣🤣🤣 duuuude

[@leandrocintrao67]

hater idiot

[@TofuProductionCinema]

You always provide phenomenal customer service and produce quality content as well. Keep up the great work, Van - hope your son will follow your footsteps one day!

[@sportbiketrackgear]

Appreciate the kind words for sure. There is a very good chance Max Van will take over some day and take STG farther than I ever could. - Van

[@ahole5407]

Quit sitting on his D begging for freebies 😂 the guy is a lowlife scumbag selling ChiNa garbage with huge markups. Don't be a fool

[@ahole5407]

​@sportbiketrackgear you just appreciate taking people's money. You are pathetic. A loser. My bet is you will be homeless in a year or two with all the sharks after you for tge money you still owe

[@ちんこ-o2v]

Damn, glad I watched this. You probably just saved me from an upcoming crash! I'm around 3 years late to this video, not sure if you're gonna see this but I just wanna say thank you!

[@sportbiketrackgear]

You are welcome, happy to help out. - Van

[@jpmon-wd6xe]

I am a 60-year-old Canadian I've been riding since the age of 15 I truly enjoy your videos find them very educational keep up the good work thanks man

[@turboboy0]

ive never had any problems with "cheap" ebay billet levers and ive used them on most of my bikes since i started riding back in 1991. used them on my suzuki katanas, gsxr's, rf900 and now my kawasaki zx14r. love them. i make sure to use synthetic grease on all of the "friction points" to make sure they always operate smoothly and blue threadlock on the nut under the levers so it has no chance of vibrating off.

[@sportbiketrackgear]

Happy to hear you have had a good experience using these junk levers on your bikes. Personally I would not install them on a riding lawnmower. - Van

[@AntaresSQ01]

Got a pair of foldable, extendable lever for 25 quid on amazon, I've bought like 4 sets on all my different bikes, absolutely good quality, simple and robust design, nothing to fail on there, on the other hand, my XT600 had a set of ASV levers on it (they are like 80 quid EACH if i'm not mistaken), one time the bike fell off the kickstand and landed on the bars, i pick it back up, nothing special, about 20 mins later when i go to leave at the 3rd or so redlight trying to stop, going to pull the clutch in, lever snaps off and made my bike almost jump into the intersection... I've dropped, hit and clipped my bike dozens of times with these amazon levers on, they never failed or shown any signs of failure.

[@kawasjt]

@Thgt Ggyh so you don't drop your bike when offroading? You are the perfect rider in that case... The XT600 is a dual sport, pretty sure the falls are from offroad riding

[@kawasjt]

@Thgt Ggyh that's because the clutch lever broke and the bike launched forward you knobhead... and in no way it is because of his riding. learn to read but mostly understand

[@anglerforlife7538]

True shouldn't risk your life just to get cheap and bad quality product.. life is priceless

[@R00567]

This man is GOLD - most definitely going to buy everything and anything from them in the future for my bike.

[@sportbiketrackgear]

Thank you for watching and for the kind words. - Van

[@daviddeleon145]

Thanks for the warning. I had a cheep brake lever bind up on my old ZX10r a few years back, and almost had a violent crash in the middle of a busy highway. Never again will I get cheep with levers.

[@sportbiketrackgear]

Sorry to hear that happened and thank you for watching! - Van

[@728yamaha]

Another great video guys. On my R6 race bike I run CRG carbon fiber levers with the remote brake adjust. On my supermoto I'm running ASV. You get what you pay for, and levers are certainly a no compromise part, they have to perform every time. Better to spend $100 per lever than have to pay $1,000 or more to fix your bike when you crash because of crappy cheap levers.

[@sportbiketrackgear]

We are 100% on the same page. - Van

[@Midwesthookset]

First of all I want to say great safety information in this video! You had me worried since I found this video right after installing the Amazon Chinese levers on my grom and z125. I watched this video 3 or 4 times trying to understand how such a simple lever could fail like you talk about. Secondly, I wish you would've talked about the difference between axial and radial brake masters. It took me a while to realize that the grom and z125 levers are axial and don't have that cross pin bearing and that there is literally no way for those to fail, in that manner. Aside from a little up and down play (really no worse than stock) I am resting easy now lol. Thank goodness, there was no way I would've spent $200 on levers for either of those bikes.😄

[@sportbiketrackgear]

You will not have the problem described in this video with your Z. - Van

[@xdepredatex]

Glad I watched this, and as always, great content from you guys. I bought a ‘16 R3 which had adjustable levers on it already and today I noticed the adjustable part had just disappeared. Time to upgrade!

[@sportbiketrackgear]

Never go with cheap controls. - Van

[@thegavel628]

Thanks (from Melbourne Australia🌏 -2022) for this info. Neighbor had this exact prob on his ZX14. After watching this vid, You/ I diagnosed his problem......crappy levers (that I didn't know he'd installed). When I asked what he'd done since I'd changed his brake pads and bled them, he said "Nothing..... Except, Oh, I changed the levers". Put old lever back on and Problem solved. Thanks guys.

[@sportbiketrackgear]

Thank you for watching and happy to hear this was helpful. - Van

[@itsmeericb]

Wow... I just bought a 2017 R6 and these MRS lever already installed on it. I’ve only ridden the bike twice so far but I won’t be riding it again until I replace those lever! This video is a life saver! Going to pick up a set of CRG levers now.

[@sportbiketrackgear]

Happy to help out. This is the kind of shit people need to know. Enjoy the new bike. - Van

[@ChefStevenDiaz]

Thanks for a clear & concise explanation. I'm so glad I came across this video just as my ebay purchases were almost complete! Needless to say, saving up my money for a much better lever set, like you suggested 👍

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@77teahupoo]

Man I’m glad I watched this , just so happens I ordered the crg black with blue clickers for my 2018 cbr 1000rr. I was glad u said these are good

[@Leeh187]

Thank you for this video, was just about to purchase those cheap levers and was looking for information on KZbin. Im a new rider and after watching this Ill be spending a hell of lot more money on my levers. Thanks

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@colbyclark2479]

Wow, great video. I was going 110 MPH on my gsxr 750 on the highway and had CoreMoto brake lines on, first 5 miles with these levers my front tire RAPIDLY locked up and by some miracle I didnt wash out or fly over my bars. I stopped so fast form 100+MPH that i didnt even have time to merge onto the left shoulder while i was in the far most left lane! I was half sticking out in traffic. A cop and pedestrian pulled over to help me lift the front of my bike and roll the bike out of hazard. BEST BELIEVE I am spending $120 on a brake lever now!

[@sportbiketrackgear]

Happy to hear you did not crash. - Van

[@12GKing12]

I'm glad I watched your video because i bought these levers and when i tested them I almost crashed due to the front brake locking up on me due to that cross pin being in that fixed position with no flex in it. Good thing I was going slow when it happened. I don't have an issue with it now since it has probably "adjusted" are my near miss. The clutch actually sticks a bit and is slow to return to the normal position thus not engaging the engine fully. I will be taking this shyt off and going with your recommendations. Thanks!

[@sportbiketrackgear]

You are welcome and thank you for watching! - Brian Van

[@patrickscycleshop]

I believe 95 percent of the headaches I have had in my business ( 35 years) have been caused by inferior aftermarket parts. I have had countless issues with lever fitment. I support your videos making the public aware of these poor fitting parts. Keep up the good work. If ONLY 1% of the levers sold were bad, how many people would that account for? Your body sliding across the ground isn't worth saving a buck...

[@kx501]

Your a motorcycle mechanic? if you watch the video of the guy coming down at the 10 sec mark just before he goes down the motor soars in revs, whats that got to do with the front brake locking up? sounds like he grabbed a handful of clutch and lost control. kzbin.info/www/bejne/nZ6yh6OqebyGhqc

[@patrickscycleshop]

@@kx501 my comment stands.

[@sekou3758]

@@patrickscycleshop It still stands? Without even addressing what @Bike Modder said?

[@patrickscycleshop]

@@sekou3758 irregardless of how this guy crashed his bike. My comment still stands about the poor quality of aftermarket parts manufacturing. I remove a lot of these levers from bikes that cause the brake Pistons to stick in causing brake drag, brake light switches to stick in or in general poor fit. I've seen quite a few of these levers break without ever having contacted the ground. As I said my comment stands about the poor quality of aftermarket parts.

[@patrickscycleshop]

@@sekou3758 he may well be right about the clutch grab, not going to deny that but as I said, my low opinion of inferior aftermarket parts still stands.

[@apriliarider6072]

I love STG but I also love my $30 eBay levers which are undoubtedly from China. I also know people who have had $700+ rearsets snap like toothpicks. Quality is important though and you must inspect any part that goes on your motorcycle putting safety above everything else! I think Brian does a great job of trying to educate riders and get people to focus on safety and that is never a bad thing!

[@Bhg265]

Agreed. It sounds like the story was 1 part cheap lever, 9 parts poor installation and poor testing.

[@burneraccount6396]

I think that's pretty cavalier, considering we're talking about something that could catastrophically fail at any moment. I'll save money by buying cheap chinese made knockoffs when it's a wallet or sunglasses, but when it's something that you need to depend on to keep you safe, buyer beware.

[@Bhg265]

You could apply that rationale to a great many parts on a motorcycle. Don't get me wrong, I think you absolutely SHOULD apply said rationale liberally, as motorcycles are inherently dangerous. But regardless, an aluminum bar is an aluminum bar. The line-bearing-housing interaction needs to be seated correctly, lubed, and obviously to fit with integrity. If that is the case, worry not. Either way, giving your money to STG is a good decision, so that's another plus to the expensive levers. STG takes good care of us all.

[@sportbiketrackgear]

The issue with this particular lever was not caused by improper installation IMO. The tolerance between the cross pin bushing and the lever body was too tight which caused it to bind. Said binding caused the brakes to lock. - Van

[@sportbiketrackgear]

Well said my man! If the $4 sunglasses shit the bed you just throw them in the trash and move on. - Van

[@solosportbikerider5734]

I took good note's "THANK YOU" so much for the information you may have saved lives by putting this video out,now i will WISH for the best product,because you get what you pay for.

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@seans8184]

Thank you for this information. I just happened to find this video. One of my bikes had aftermarket levers on it when i bought it. I could not figure out why the front brake was so touchy, almost like it wanted to lock up. I put a set of Parts Unlimited Honda levers back on it, now it is perfect. Crazy stuff. Thanks again!

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@dariodipaola8445]

I use to stand by Chinese levers; they can definitely get the job done for the avg street rider. After converting my bike to track-only though, I was throwing the Chinese levers out by noon and putting the OEM ones back on! The play that you showed in this video is important if you're looking for the absolute most precise and smooth lever actuation. For me, with a quick-shifter, the up/down play in the (clutch) lever wasn't very bothering. My problems with the Chinese levers came when I started to heavily brake into the corners. There is SO much flex in the lever when you squeeze the piss out of it. It actually gave so much that I had to adjust my levers another 1-2 clicks, which was uncomfortable, but gave me enough stroke to not bottom out! It was crazy. I'm sticking with OEM from now on... I might do a shorty lever on the clutch side and I do I'm definitely going with a name-brand like Pazzo, CRG, etc.

[@pommeybiker]

I got vortex lever for brake and use Chinese for clutch. The vortex came with the same knuckle as the Chinese one

[@doomsdayduck4479]

The tolerances are so tight on the CRGs they give Brian's shirt a run for it's money! 😂 Joking aside I'm going to get some CRGs now

[@sportbiketrackgear]

Great comment! - Van

[@bradgonewild]

Thank you for the heads up. Potentially saved my life

[@sportbiketrackgear]

You are welcome and thank you for watching. - Van

[@BrookStockton]

I appreciate this video. I bought a set of very high quality levers and because of this video ended up realizing a mistake I made installing them. I had sloppily applied thread lock to the front brake actuator pin and it dripped into the rotating bushing locking it into a single position. Went back to check it because of this video and realized the issue.

[@sportbiketrackgear]

Happy to hear this was helpful! - Van

[@lnaesll]

i'm going to share this with a friend of mine. he just had this same issue. i told him after the fact to never buy bike parts on ebay and amazon. luckily he didn't get hurt but he absolutely could have! thanks for putting out quality content!

[@sportbiketrackgear]

You are welcome and thanks for watching! - Van

[@pinkstonterence]

I had the same thing happen to my CBR 1000RR when I bought it. Bought some levers off eBay and went for a ride and only made it about 300 yards and my front brake lock up. Each time I squeeze the lever the more it lock. I actually had to Walk home and get my wrench and swap out the levers on side of the street to even ride the bike home. If I would have made it to the interstate which was about 3 miles away it would have been really bad. I pray that I never made it. But I will never buy Chinese eBay or Amazon levers again. NEVER..... So I agree with this video 100%. Saving a few bucks isn't worth crashing a 14000 bike or worse losing my life over it.

[@sportbiketrackgear]

Appreciate you sharing this man and happy to hear you did not crash your bike! Amazon has opened the door for poor quality products with crazy low prices. When you look at the listing the photos make the item look amazing, deal of the century. It leaves some people with the impression they are getting ripped off if they invest in a better quality product. Having the opportunity to compare CRG and MZS Levers side by side is not something most would ever get to do. I can tell you that there is a massive difference between them. - Van

[@yteka99]

I put some on my buddies 600rr and had the exact same thing happen. Day before a trackday so I told him go ride it to make sure it's good. He called me from the first stop sign he came to and I had to beat the pin out with a hammer and screwdriver lol

[@nathandaniel6540]

Same thing happened to me except I made it to the highway. Luckily I didn’t go down but I came to a complete stop right around a blind turn and there I was stuck in lane 2 with my bike trying to get drivers attention so me and the bike wouldn’t get hit. Shit went on for almost 10 minutes before someone finally pulled over to help. That shit was sketchy and I’m super blessed it wasn’t way way worse.

[@sportbiketrackgear]

@@yteka99 Thanks for sharing, already a ton of brake locking comments on this video. - Van

[@sportbiketrackgear]

@@nathandaniel6540 Glad to hear you are ok. Tons of people have already posted comments about brakes locking in this video and it has only been up a couple days. - Brian Van

[@Guzzoogle]

Great video! Thanks :). At first, I was skeptical - "Oh great, another retailer trying to convince me to buy expensive stuff" - but what you said made total sense! Also, it was awesome that you were very respectful and made it clear you had no ill will against China, but these motorcycle levers are just dangerous. Before watching this, I was completely unaware of the axial master cylinder/lever setup, having ridden mostly dirt bikes. That being said, I believe there is room for some clarification. For this axial master cylinder/lever setup, the Chinese quality control makes these levers DANGEROUS. Even with modification and maintenance to make it smooth and tight, I am not sure how the materials would wear. HOWEVER, for simpler levers, like those on dirt bikes, without the axial design, Chinese levers should be totally fine IF you check them out to make sure they are structurally sound and don't bind at the pivot point in the master cylinder or perch. Sure, they will have more slop and be generally less refined, but they should work fine. Thanks for the great video! Cheers

[@sportbiketrackgear]

If you lose your brake lever on a road bike you are in some deep shit. Is saving literally a couple of bucks worth risking yourself and your machine? - Van

[@A_Pt_9298]

Oh yeah, but there's a HUGE gap in pricing between the 'better' ones and the ones that come from China, like, £120 a set of Pazzos versus £14 from China, where they're being produced anyway!

[@jnavonoD]

Dirt bike rider here. It's a total waste of money buying the cheap Chinese levers, they rattle apart in no time and the tolerances are rubbish. Did it once, regretted it, now will only buy and install Zeta levers. They might cost more but they are worth every cent. Ride on!

[@Redrider2k2]

Every brake locking/cheap lever problem I've seen so far has been with radial master cylinders. If you don't have a radial master, you'll most likely be fine. If you do have a radial master, there's a pretty good chance you'll still be fine but you have to take a long hard look at your set up and make sure it's working right.

[@sportbiketrackgear]

Radial masters are the common denominator for the locking brakes at this point for sure. That said not everyone knows the difference between radial and axial. Let's not forget the horrible tolerances these levers have. Better to leave the OEM levers on then install these MZS, they have better feel. - Van

[@ibizatotalconcept1236]

Great to hear this….just in time before installing. Thx for that, always go for safety. Keep up the good work, greetings from Amsterdam

[@sportbiketrackgear]

You are welcome, those cheap controls should be avoided. - Van

[@brizzlefizzle]

I don’t understand how people are willing to risk their lives to save a few bucks. Truly blows my mind

[@sportbiketrackgear]

You and I are on the same page! - Van

[@echoconcrete8123]

Thank you for this video! It's documented that this has happened to many riders, who knows how many riders have died because of cheap unregulated Chinese parts . If you had a crash and you suspect it was caused by Chinese levels...change your levers - BUT keep your levers and purchase receipt, packaging, etc (and document your damage) - we need some kind of legal action against these manufacturers, I'm looking into it, but this type of thing could take years. But please keep your receipts/documents (very important) for going forward with any type of lawsuit. I will be posting in videos like this one with updates and once things get going will setup a formal website.

[@sportbiketrackgear]

This is a bigger problem than most would believe. - Van

[@douglas7260]

Yea, but unfortunately there is no way to hold these Chinese companies accountable. So many Chinese companies steal intellectual properties and it is not like the Chinese government is going to enforce any kind of punishment or fine. Best thing to do is spread to word to everyone to not buy cheap knock offs. The reality is, most riders who buy the cheap stuff like this probably do not realize just how much they are gambling with their life. If they did, I doubt they would purchase the cheap knock off stuff.

[@vicenterr7]

Got it. When i take it to the track I'll use OEM levers

[@danielfitzgerald9008]

Mine moves smooth Thank you for pointing that out Youre a great dude

[@Canyonluvr77]

Mine did lock up and I did crash . We were wondering what happened. Was having a great day it was a mystery till I watched this video . Thank you

[@sportbiketrackgear]

Sorry to hear you crashed. - Van

[@klaus-juergenkessel3916]

Top Info and you are absolutely right! A friend of mine had a life threatening problem with the cheap Chinese levers.! He could avoid a heavy accident because of his experience and was very lucky.

[@sportbiketrackgear]

Thank you for watching and taking the time to share this! - Brian Van

[@ash3sgaming812]

My OEM levers dont even have those bushings

[@JayPatel-cj3fk]

Yup ordered one from Amazon. I was scared when I watched this video and never bought them until recently I pulled plug after many recommending for my motorcycle. By that time I remember the watching video but didnt remember the reason not to buy. Well my break levers are so fucking simple, just a simple lever that can is held by original nut and bolt. No other bearing and stuff. After watching the video, I am so glad I bought them and not wasted $200 on CRZ. They are worth it.

[@fyuecd2]

jay patel can you supply the link to the levers? Thanks

[@thelifeofBrian8]

@quadruple treble 1888 lol I mean if you life is worth saving a few pennies then good for you

[@Doogleraia]

Properly working brakes are more important than a working throttle or even engine. Sure, wear happens, but at the point where they don't brake anymore, you better pray you have good enough gear to take that coming impact unless you can engine brake enough to survive.

[@MrTenzn]

I been riding for more then 12 years I believe If I am meant to die , I will die now matter if I have Pazzos or CRG.

[@SIMSPHERE]

The end result of the video applies to ALL riders, regarding any new gear. (no matter who makes it) Inspect your new gear, BEFORE you install them, AFTER you install them, do a pre-ride check , and then an "in/on-ride" check. If it works properly 100 percent, include it into your weekly/monthly maintenance intervals. If it does not function the way it is advertised, RETURN THEM, immediately.

[@cadger10]

I wish I’d seen this before I ordered some $25 levers off eBay!! I installed them and the brake lever wiggles like crazy, I instantly took them both off and ordered some driven halo levers from you guys!! Lesson learned!! You guys are the best!!

[@sportbiketrackgear]

Thank you for the order and for watching. When we come across something like this we like to share it. - Van

[@cadger10]

@@sportbiketrackgear Let me tell you, your videos have saved me and my buddies THOUSANDS in labor costs Van!! We love you guys at STG!!!!

[@demetriosmarinos8361]

Bought amazons ride it forever levers. Look nice, after watching this video I looked at the levers I did not yet install and he is right! Glad I can send these junks back. Thank you

[@sportbiketrackgear]

You are welcome and I am happy to hear you sorted this out before it became a problem. - Van

[@brandonpearce9631]

I almost bought a set of this pos's ! Thanks for the heads up. I'm ordering Crg's now! I'll be placing a order with you guys soon!

[@sportbiketrackgear]

Appreciate the support, you will love the CRG levers. - Van

[@mikeMcoa]

@@sportbiketrackgear same here

[@HeavyHaulinwBlue]

you guys changed my mind!!!!! thx bro

[@azariusshaw1890]

I literally have the same exact levers on my cb919 and they have worked flawlessy since installed. I think I can speak for 95% of everyone watching this video and say that I'd choose a cheap $30 pair of levers over a $300 pair any day.

[@sportbiketrackgear]

A 5% failure rate on a brake lever is horrible. These MZS levers are so sloppy you are better off with the OEM levers on the bike. - Van

[@xbladerunner]

@@sportbiketrackgear I agree. I would never accept a 5% failure rate. I also would never gamble my life on a failure rate like that.

[@firestorm996]

A great video and great advice that’s just as relevant 4 years later. A lot of folk get seduced by the low price point and funky anodising, but like you say there are certain parts on a motorcycle that you need to be able to rely on 100%. Front brake is perhaps the most important control on any bike, it makes sense to buy quality.

[@sportbiketrackgear]

Well said and thanks for watching! - Van

[@noamkleiner8749]

Ordered a lever from amazon to replace my broken tip clutch lever. Cancelled the order immediately after watching this. Spend a little extra and stay safe.

[@sportbiketrackgear]

Never install cheap controls on your bike. - Van

[@MrRAW1968]

Thanks for this valid lesson. I was looking for new levers, trying to get a cheap replacement. Ofcourse quality doesn’t come that cheap, so I’ll look into the CRC levers instead.

[@sportbiketrackgear]

You are welcome and thanks for watching! - Van

[@DRAKE5001]

Axial master cylinders use simpler levers than radial ones , that means that a cheap and even chinese levers can be used in relative safety but radial ones need really good ones ! But not just for safety but for feeling!

[@sportbiketrackgear]

You are correct, now do you think most riders who purchase levers know the difference between radial and axial masters? IMO they should not have to know the difference, the levers being sold need to be manufactured to proper tolerances. - Van

[@DRAKE5001]

Sportbike Track Gear you are absolutely right! I have some Chinese levers as spares and the difference between “good Chinese levers” and bad ones is just too much as a gamble if you don’t know what you are doing

[@XH1927]

To preface, I HATE the Chinese knock-off economy, but I disagree profoundly with the general sentiment expressed here. Drivers, and Riders even moreso because we should hold ourselves to a higher standard, should understand the simple terminology and technology involved in constructing our machines. Knowledge is power and you wouldn't need to make these videos if Riders understood simple engineering principles.

[@inthesPhila]

At the annual BMW motorcycle weekend party in southern Germany, the German Police had a booth and they showed a rack of "aftermarket" stuff that is Illegal for use on German roads. Aftermarket "cheap" brake levers were on their rack. These kill riders in the Alps and elsewhere.

[@sportbiketrackgear]

Thanks for watching and taking the time to share this. IMO this is a real problem from hard parts to safety gear that needs to be sorted out. - Van

[@davemartin9774]

I'm with you too bro, I believe 100% these are dangerous and SHOULD be OUTLAWED IN THE USA as well!

[@hoomannili]

Exactly how do the German Police identify "cheap" aftermarket levers?!

[@ColtonBlumhagen]

@@hoomannili My question too.

[@plllot9713]

dude. in germany, anything that is not factory fitted or doesn't have compliance certificate for the specific model is illegal, so even your beautiful $200 levers would be defined as 'Alpine riders' killers' xD

[@eloney1]

The truth may anger some, but if it saves one life it`s worth it. Great job keep it up.

[@sportbiketrackgear]

This is something that needs to be shared. As before some folks will call me names etc... No worries, I have pretty thick skin by now. - Van

[@AustinCProductions]

My wife got the MZS levers on her 300 and it was a disaster. ( she got them second hand, and had her friend install them ) I didn't know about it but it was a complete disaster. awesome video, thank you for making this video, the world needs to know about top shelf quality levers for not only their safety, but the safety of others around them.

[@sportbiketrackgear]

Thanks for sharing! We just turned this video on a couple hours back and there are already multiple comments regarding issues with these levers. One comment noted the front brake locking as well. Let's see how many more are posted after this video has been up a little longer. - Brian Van

[@Surpriseify]

Agree 100%, people seem to think that they can pay 10% and get 100%. Not how it works! I treat the mods i make for my bike (cosmetics excluded) as if i were buying new tires, i'd not skimp out on those, so neither will i for a lever or rearset, or chain...

[@AudriusN]

@@Patrickisnt ha ha, example, my XJR1300 - front wheel OEM bearing (NSK) 20 Euros, go to any shop and the same bearing is 10, be it SKF, Koyo, NSK :D

[@plllot9713]

with expensive levers you pay 500% and still get 100% at the most ;)

[@paddywestside3396]

"I'm sensitive" 😂 As always, superb video!

[@sportbiketrackgear]

Thank you for watching! - Brian Van

[@Roy_Godiksen]

I have a general rule: NO cheap parts on a motorcycle. It's just not worth it.

[@canturgan]

I also have a general rule, don't crash.

[@chrisharrison5655]

Greetings from the UK, I have a 2004 GSXR 750 K4, and this has happened to me, you are just riding along and all of a sudden the front brake self applied fortunately not locking but SCARY!, pads smoking and after a couple of minutes they free up ,happened 4 times, could not fathom out the problem, and scared to ride it, after watching this took the after market lever off and low and behold the same problem,you nailed it, put the stock lever back on and its sorted. PLEASE TAKE THIS VERY SERIOUSLY, IT COULD COST YOU YOUR LIFE!!!!!!!!!!!!

[@sportbiketrackgear]

Thank you for watching and taking the time to share your experience. - Van

[@scotw67]

This video is reason 1,462,750 that Brian and the STG crew are the BEST!!!!

[@sportbiketrackgear]

Appreciate you watching and the kind words! - Van

[@kmason3610]

I'm from China and I hate those made in China crap too. Good thing in the states is that they only priced $40,$50 each, so that way you know you are not buying any quality item. In China, they put big names on those crap and sell them at high rates. You can't really tell the differences cuz for most ppl we don't know what the authentic ones look or feel like. I hate to say this, but people can buy good things from China when those things don't require quality material or precision. Here in China, we have a motorcycle company tear a Honda cb500x apart, copied everything and changed the look a little and they say they made a new bike. Sad thing is that crap is having endless problems. It's really funny cuz it's just like a student copied No.1's homework and still failed class.

[@sportbiketrackgear]

Appreciate you sharing your perspective my friend. - Van

[@para39gt]

国内没有市场 环境 说实话我觉得抄没有问题 但是久了也要拿出点自己的能拿出手的东西

[@kmason3610]

@@para39gt 我没有反对抄，世界大厂都在抄，有厂商租一辆特斯拉全部拆下来抄，我反对的是，既然抄了，省去了所有研发费用，那么就应该抄抄好，把配置和材质提升一下。给用户一个更好也更廉价的选择。全部抄一遍下来还是没抄好，这不是来搞笑的吗

[@para39gt]

孔目兴 just like what I said

[@thephaniaraf8672]

K Mason well said. Am from southAfrica but I live and work in China now! I have bought very many goods with big names but on delivery the goods are crap on quality! On the 5th of this month(5.4.2019) I bought a brand new sport bike. I think it’s called horizon am not sure of its proper name @$3400. (Us Dollars). As I talk now the thing can’t move. It’s at a repair shop now. I broke a valve in the engine coz I tried to race it a bit! Taking quick tight twisties Change gears up and down so fast. I only rode it for 160miles. Now I have to spend another $980 to get it back on the road .. but why do we have to suffer in the hands of these ruthless money minded suckers ?? They don’t care about product quality. But only want to make profit! And worst of all The dealership won’t cover the damage! Am so disappointed

[@Jasperv71]

Coming from the IT world where most things are made by a select few companies, take Dell and HP both buy their motherboards from Foxconn and are made on the same assembly line.... The point is all this trash levers, computers & underwear are all made in the same sweatshops but certain companies pay the sweatshop owner just a little more

[@admirkaralic7209]

That's not exactly how it goes. It's more by Egineering and Design, you can't buy Egineering for $50.

[@trekkydelirium-vroom5821]

i bought & installed Pazzo levers on my CB500X six months ago. I love them; Great levers; fantastic quality like CRG 🇺🇸. Pazzo levers are Made in Canada 🇨🇦.

[@jackruby4680]

I guess they do have more up there than just beers steers and queers

[@abdonluna5324]

Excellent video man! You cannot go cheap on bike parts, it’s your life on the line practically. Thanks Brian!

[@sportbiketrackgear]

You are welcome and thank you for watching. - Van

[@ohmaigawshitsdavid]

On my way to work this morning my brakes locked up on my recently bought ‘16 R1S. Very fortunately to have been able to slow down in time and get footing but the bike was too heavy due to the slope of the road so I had to lay her down. Go figure it was due to MZS levers I installed. Last time I buy cheap aftermarket parts. I had thought I just did a bad install. I know this video is old but you saved a life. OEM levers are going back on. Thank you Brian.

[@chrisjones7281]

I don't doubt the level of Quality on a expensive line of levers is excellent. They have gorgeous products. Those are premium features that not even OEM levers have. OEM also tend to have a bit of play. I bought some nice Spiegler lines from you guys over a year ago May 2017 for my FZ1 with R1 front end fork conversion and I run them with Chinese lever and M/C. Zero problems. I also bought a used R1 that also had Chinese levers on them and they had been on the bike a long time with no issue. My brother has a 2015 R1 with them with out issues and my friend has a Triumph Street Triple that he picked used up from a shop with those type of levers already on it. All of them have seen track days and canyon/mountain rides without issue. Just by looking at the comments on here its like everyone thinks this happens all the time. If this is the cause then shouldn't it happen 100% of the time? Are those the actual levers on the customers bike? Were they tested to in fact prove this is the issue.? R&D is not done like that. And if they are truly dangerous levers why could you see them on an old clapped out bike? Dangerous is dangerous. If they are the true issue they shouldn't be on any bike. Cost of the bike is irrelevant to cost of life. Making statements like clip ons breaking under brake pressure? Support the products you sell . That's good business sense. You guys are a quality seller which is why I made a purchase from you after seeing your video also. But don't use hearsay and scare tactics and say I love Chinese people "BUT"..

[@sportbiketrackgear]

Nothing in this video has been misrepresented, these levers caused the brakes to lock on the R6. I did not do this to scare people, I did it to share something I feel needs to be shared man. You are correct not all of them have issues. That said ask yourself if you want to be the guy who's brakes lock up and you fall because they did? It is also a fairly safe bet these products are not backed by any product liability insurance. While I do not know that for a fact I will say it would be very difficult to cover the expense of said insurance when you are selling a set of levers for $40. End of the day we should all do what we feel is right for us. - Van

[@deathwish8339]

It only has to happen once. Someone tells me a dog bites, I dont go pet it because he looks fine.

[@chrisjones7281]

@@deathwish8339 Porsche and Ferrari break down. We own BMW and Audi's in the family and have recalls. It happens. Nothing is perfect 100% of the time. I'm not saying the Premium Stuff isn't amazing. Ball Bearing in the adjuster is cool.But once you adjust the lever to your comfort do you ever change it? The factory OEM doesn't have that feature , so comparing it to another brand and saying its not as good because it doesnt have that feature is a bit silly. Now looking at the pivot bushing design that Brian Van pointed out IS different from the Brembo design on my R1 and the Brembo RCS design that is fairly common on many bikes. SO with the rotating bushing being tight as BV pointed out he may be right. But that is not every design .And I'm sure that you could free that bushing up fairly easy IF that was a common issue.Should you have to free a bushing? NO, but like any motorcycle maintenance it wouldn't hurt to check an make sure everything is smooth. As I looked at the comments I saw that there was a blanket response that everything NOT from a premium brand was unsafe. Should you support the premium brands since they put in the R&D that is often copied? Sure if you like. But Even the OEM copy each other as well. As far strength is concerned, all levers break in crashes regardless of make. Like I said, this not a knock to STG as I am a paying customer and follow their page.

[@sportbiketrackgear]

@@chrisjones7281 Thanks for taking the time to leave this! You could 100% free up that bushing if you had enough knowledge and experience to see the need to do so. The reality is most riders do not have said knowledge nor should they need to, the levers should simply me made to the correct tolerances. I am not saying only premium brands are safe, I am saying these MSZ levers have shit tolerances and have caused the front brake to lock on several bikes (multiple comments in this video already noting brake locking). I feel best practice when shopping for brake components, levers, handlebars, rearsets and drive line components is to stick with known brands that have proven themselves to perform. Taking it a step further I also believe we should all support brands to invest in the research and development that works towards making this sport better. The motorcycle industry is very unique when you compare it to others out there. You won't find many people who make their living in this industry living in a mansion or flying in a private jet. Sure you can make a decent living if you work your ass off, passion for riding is the real driving force. - Brian Van

[@deathwish8339]

@@chrisjones7281 Porsche and Ferrari do break down, as do all vehicles. They also bring a somewhat unique driving exerience with their crazy performance. You are paying for the outstanding performance and relatively high reliability. A better comparison is, would you buy a known brand like Mercedes or a knockoff clone of a Mercedes like a BYD (chinese manufacturer) for 1/3rd the price. Be honest now.

[@LeaveYouOnRead]

CycleCruza got them $20 Ebay levers on his CBR1000RR with no issue, I had a set on my Ninja 300 no problem. Still using a set of $20 Ebay levers on my new Fz07, so far so good, the pull fells amazing. I can say that 95% of levers on the market r prob made in China. Not paying for $120 for a single lever. LOL

[@sportbiketrackgear]

Whatever tickles your pickle man. Over the years I have installed several different brands of levers on a wide range of bikes. My opinion is based on first hand experience and information learned over an extended period of time, not 1 set of levers on one bike. There are already several comments on this 2 day old video noting brakes locking up caused by the lever. Not worth the risk. Using these levers is about as smart as wrapping your junk with knock off condoms IMO. - Van

[@WICKEDGIXXERL]

I didn't know thay made after market levers for Chinese scoootaasss

[@sapalobo9723]

You are taking advice from CycleCruza?😳 good luck.

[@LeaveYouOnRead]

should i taking advice from u? hahahaha@@sapalobo9723

[@sapalobo9723]

@@LeaveYouOnRead probably not, but I stand by this one.

[@flip_moto]

this video made me check the tolerances on the mzs levers... hadn't realized how sloppy they were. not going to risk it, I ordered the upgraded OEM shorty handles from Triumph before taking the street triple to a track day. thanks for the advice STG. I even found some that are only $42 for the set, $8 more expensive than the chinese knock offs. No Brainer to stick with OEM.

[@alphaforce6998]

He is not advising, he is selling...to gullible fools.

[@nlee5034]

Thanks for the detailed explanation, on exactly how/why “this” has to do with”that”. I just bought a pair of those. Luckily they haven’t been sent yet, and I could cancel the order.

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@neipas09]

I almost bought some of these tonight. Glad youtube recommended this video before i did.

[@jl8973]

Joel Taggart they’re fine. I’ve had a few of them. Don’t let this video scare you off. He’s just trying to sell his product. Check everything before installing and lubricate everything and make sure it’s working properly before riding. You won’t have any issues.

[@sonofernest]

So the takeaway here is: "Inspect your eBay levers before installing them!"

[@Mojoissimo]

Not really. You now know some things to watch out for with levers (thanks for the great video)! What problems will kill you with other substandard parts? I'd suggest that if you have enough knowledge to reliably spot lethal defects, you wouldn't usually be buying dangerous parts in the first place. Buying a part that will kill you, then catching that fault at inspection is a 'near miss' - the last chance before you're injured/dead. I've ridden with cheap levers, and I've had a brake lever come off while doing 70+ on a GSX-R1000 on a public road. Somehow managed to stop in time with engine braking & the rear brake, but have since only used ASV levers (DOI: now have a sponsorship with ASV). The takeaway is: don't skimp on critical parts. Just because it looks and acts like a quality part at inspection (as mine did) does not mean it will continue to function reliably.

[@Ru5te]

@@Mojoissimo So the takeaway here is: "Inspect your eBay levers before installing them!"

[@Mojoissimo]

​@@Ru5te No. But feel free to follow your own advice - keeps me in a job. ;-)

[@canturgan]

@@Mojoissimo Brake pads and brake cylinders maybe, but a simple lever?

[@Mojoissimo]

@@canturgan One of my GSX-R1000s had a fully floating front disc with amazing calipers, pads, lines etc. Riding hard one day, I pulled on the aftermarket lever, which came apart in my hand, and I watched the parts fly down the road behind me at over 100 mph. The pads & cylinders were great, but I had no way of using them! I now have ASV levers and HEL lines etc sponsorship - I only want the best for my braking system. All I'm saying is that there are some parts that are underestimated, but actually critical in a serial system. With enough knowledge and experience you can use any part (that's what the factory do to make the bike in the first place)! Unfortunately the Dunning-Kruger effect means that those with less knowledge (like me) don't know what they don't know - hence will make critical errors when (unwittingly) working beyond our competence. I try to avoid this paradox by relying on highly-knowledgeable people (like ASV) to keep me safe, rather than unknown internet resellers. Some will have enough knowledge to be able to use such parts safely - but I suspect this would entail buying bulk quantities and testing the parts themselves - so in short I suspect this video is not aimed at them, and they are not trying to save a little money on a single pair of levers!

[@zcustdrum]

Great video. I used to have those exact levers on my bike but quickly replaced them with a pair of ASV levers. Would be interesting to show other comparisons between quality products and cheap knock offs (clip ons, rear sets etc)

[@calcal2030]

He did one for motorcycle stand and a lot of people with the cheap shit slammed him for it. sigh...cheap people is gonna be cheap.

[@underworldringside]

All the Chinese levers are shit nothing to know

[@marcomazariegos]

I was about to buy this levers on amazon until I saw this video. With the video I understand what happens with the brake lever, but what would be the consecuences of the cheap levers on the clutch side only?? Thanks for the info.

[@sportbiketrackgear]

You should be good to go with the clutch side. Still not great quality, just won't really be risking your personal safety. - Van

[@marcomazariegos]

@@sportbiketrackgear thanks for the reply, suscribed!!👍

[@sparticl3]

Thanks for the video and what to look for. I just put some shorty levers on my 636. Actually took them off to verify their tolerance and action.

[@sportbiketrackgear]

You are welcome and thanks for watching! - Van

[@mgbiketec]

We can only agree with you and for that very reason we offer a lifetime warranty on all our levers which are designed, manufactured and assembled in Austria since 2008!

[@sportbiketrackgear]

There are a lot better ways to save money than installing knock off controls on your motorcycle. - Van

[@circasteveo]

I have mzs on my dirt bikes, they get beat on and they are perfect, lasting longer than stock.

[@amonGustavo07]

Excited to put mine on my grom

[@kanand00]

HI BRIAN, am going to change the stock break lever , clutch lever. thank you for the info Gosh. .

[@TexasJack78]

Bottom line, your customer installed a bad part, then he rode around on it. This is 100% resolved by anyone with just a little common sense on install. And it needs to be said, that ANYONE who does maintenance on a bike without thorough safe review of the work, should not be riding bikes to begin with. SMH

[@R0CKETFOX]

I actually crashed at 70mph because my front brakes locked up suddenly due to these levers. Definitely lesson learned!

[@sportbiketrackgear]

Hard to believe how many comments from riders who have experienced a crash after the brake locked on this video. - Van

[@dontbsilly8104]

Man my mate woke me up out of bed as he had a accident his brakes locked up and his bike ended up under the car thank god his alright & the bike is not that bad considering it ended up under the car but thank god I’ve seen this video explaining this !! I always like to make sure and review things before I buy them & have told him also.. I really hope he does the same from now on. Thank you for this video God bless 🙏🏻

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@evansolomon169]

First off, great content on the STG videos. Brian, you obviously are a smart guy with years of experience which leads you to more informed opinions. I respect the things you say based on your intelligence and experience. However, Joe Blow with limited knowledge trying to install anything that he doesn't fully understand is an accident waiting to happen. That could be levers, pegs or even something as simple as adjusting chain slack. Motorcycles aren't dangerous, tackling a job that you're unqualified for is dangerous.

[@sportbiketrackgear]

Thanks man, appreciate the kind words. - Van

[@joshhuoabski3278]

ive been servicing 2 gsxr 750's from 0 Miles each. 2006 and 2017. guess what mashed my 2017. it wasnt my pair valve mod. wasnt my full exhaust i installed, or the PCM V i put in a had generic programmed myself. It was those damn levers. So joe blow cant know that his shit will vibrate loose and locked could he, or does everyone else have the ability to see in the future? kzbin.info/www/bejne/p2TdeI2rmbSqmMk

[@pplsi1]

I have had these MZS’s on my K1200S for years now. Have not had any issues from day one. If there was, I would have sent them right back immediately. I drive test everything I install in my driveway then around the block before I go rippin’ around. I have trusted these levers time and time again over 180mph. Maybe it’s because mine used the lower half of my stock levers and were not a direct replacement. Good video though I enjoy all of your vids. Lesson: test your stuff before you go ride.

[@huffingfarts]

I'm gunna check my MZS levers Monday. I haven't had any problems the last 2 seasons. Thanks for the heads up.

[@xenogears5177]

I ended up taking off my $30 chinese levers and put the stock levers back on until I can afford a good set. My brake lever was bound up just like those cheap one's that Van had. I'd rather be on the safe side instead of crashing my 11k zx6r.. not worth it.

[@krisreeves6242]

Any update? Still use the mzs?

[@huffingfarts]

@@krisreeves6242 I actually switched back to my OEM levers, but NOT because the MZS levers failed in anyway. Honestly, I got tired of the embarrassment of stalling my bike at the beginning of every riding season. The MZS levers never got stuck, or hung up. I did lubricate the pivot pins with lithium grease. Hope this helps.

[@krisreeves6242]

@@huffingfarts hey thanks this is super helpful - I ordered these from whatever province in China they are coming from (not arrived yet) and haven’t installed them yet. It’s good to know there is a chance they will arrive mechanical sound...

[@Dwit2EEs]

@@krisreeves6242 I've had MZS levers for the past 3 years and no issues whatsoever. Just grease the pivot pin when you're installing them. I have a 06 cbr 600 and the levers don't have the pivot pin, so there's that

[@G100666]

Many thanks for this. My (ancient but great fun) 2001 Yamaha 1000 Fazer recently had a similar issue on a regular road ride. Never even thought it could be a lever problem and had the calipers checked, cleaned and taken care of. Took it to a track the next week and, whilst it didn't lock up because I wasn't braking aggressively, it stayed on for a while and I had to stop by the side of the track for a while to let the calipers free up. I'll check the lever tomorrow. It's worked perfectly for years but maybe now either worn or dirty inside.

[@sportbiketrackgear]

Hope you get that sorted out. - Van

[@faridb40]

I have those same exact MZS levers installed on my new to me 16' R3, I dont even like the idea of aftermarket levers, and now that I have watched this vid i definitely know I will replace them back to stock. Thanks for sharing,

[@sportbiketrackgear]

You are welcome and thanks for watching. - Van

[@4doordriven]

Are You able to remove the cross-pin from the lever on the "MZS"? If so, would you use a dremel or sandpaper to free up some space where the cross-pin goes, re-install it and have the play necessary to prevent brakes from locking up?

[@sportbiketrackgear]

You should not have to do that, the lever should be good to go out of the box. - Van

[@4doordriven]

@@sportbiketrackgear I understand that 100%. I was shedding some light for the people that don't mind fiddling with their bike parts and would go the extra mile to make the levers work for them. But at sub $50 you should not expect the precision that's present in the premium levers

[@clintknowlton4589]

I deff want to trust my brakes to a home dremel job......

[@4doordriven]

@@clintknowlton4589 .......you're only putting trust in yourself. If you don't trust yourself then, easy, don't attempt it and go out and buy premium levers instead.

[@sumgui6010]

Love my MZS levers, spending 10% of my bikes total value on levers just seems foolish - not all cheap levers, not even all MZS levers will have this issue you're talking about. Mine don't even have that bushing - they have a spring. Work awesome and I would love to see a CRG take as much abuse as us dual sporters put onto our levers... lol. Bet you anything if I had something like those on my bike I'd have a broken perch and that's way worse than a lever breaking.

[@thepanman8]

Love my MZS, way more comfortable than stock levers

[@sebg2086]

i have a pair of asv on my bikes.....and cheap chinesse on my girlfriend bikes.....for probly 8x less the price.....theyre worth it....even if they fade every 6 month.....you still win

[@Anthony-qh1xv]

How are they holding up after this time? Are they still safe to use? I just put them on my bike

[@sumgui6010]

@@Anthony-qh1xv still fine!

[@intergalacticbasketballdro7186]

@@thepanman8 My OEM Levers work "Perfectly". Awesome comfort, too! I wouldn't trade them for any fancy looking aftermarket folding type of garbage lever. (Ever)

[@benjaminreppond6725]

lol ive had those mzs levers on my dirt bike for years. this guy is just a salesman. the mzs levers work fine.just lube them before you put them on.

[@chriscs9080]

Yeah stupid people don't even know the basics and then blame the Chinese haha

[@lewontwo5883]

I could not agree more. You made some really good points. Some things require a quality product and quality usually comes at a higher price. Reminds me of the old saying "pay now or pay later". Motorcycle parts, equipment, gear, and service require quality if you want to maximize the experience and live to ride another day.

[@sportbiketrackgear]

Thank you for watching and taking the time to leave this comment. - Van

[@VishwasParchure]

Ive read a lot of the comments, and i am just a potential user of aftermarket levers. I liked the way you showed how to check one before installing it. Thanks!

[@sportbiketrackgear]

You are welcome and thanks for watching! - Van