CLICK HERE for my BMW Fanatic Amazon recommendations that I’ve tested on this channel! Thanks for the support! 👉🏻www.amazon.com/shop/bmwfanatic
@JlevGaming7 жыл бұрын
the fact that the oil filter is on top makes it easier than most vehicles and to say something is easier when talking about working on a BMW is a rarity
@adriangutierrez95826 жыл бұрын
Joshau Levell I have a 1992 E36 and at the same spot. There really isnt any other spot to mount it
@BubbaGreathouse6 жыл бұрын
Great video. Use the same filter. I have a couple different techniques: ramps for wheels (no jacking, no BMW required jack pads either), pre-oil the o-rings slightly for “sure” seal and reload the oil filter to decrease the amount of time engine is “dry” of oil during first start up after change. And I am sure you are aware, Castrol and Mobil 1 both make the euro spec oil for the N54 and it’s commonly avail at Wally World. Thx for vid!
@koachk53607 жыл бұрын
Lee, Pelican Parts in their DIY oil change write up state that if you don't loosen the oil filter housing lid first, you will leave about 1 liter of old oil in there. So if this is true, you'd have 6.8 qts + 1 L in your engine at the moment.
@jonasthemovie4 жыл бұрын
Change filter before you put the plug back in.
@allmycarsisbroke3 жыл бұрын
And wet the tiny o-ring with oil before installing it onto the bird cage piece, also wet the large o-ring with oil before reinstalling oil filter cap. Lastly, it's not a bad idea to wet the oil filter by soaking it briefly in the 6.8qts of clean oil you will add to the car, as well as pouring 1-2 quarts of your 6.8qts into the oil filter housing before installing the filter. Then pour the remaining ~5qts into the normal oil filler cap.
@richtofenillingroth6415 жыл бұрын
Another comendable film ...surely worthy of an award for best BMW e90 DIY short.
@JKMediaaa5 жыл бұрын
just picked up a 2011 335is DCT today , love it so fast
@Flyingaceful4 жыл бұрын
JK Media, I still have my 335IS e93 since 2012 when I purchased brand new. Love it and people still turn heads whenever I drive it.
@colin555944 жыл бұрын
Mine felt slow now it makes 450 wheel, very nice
@SirtubalotTX3 жыл бұрын
Great video and thanks. Would like to add that Castrol Edge is still spec for BMW Longlife-01 as long as it has A3/B4 on the label.
@911engineguy3 жыл бұрын
Wow, I am totally in awe of the large block sizes and huge flat driveways you have there!
@JimmyJohnson-ub4rt4 жыл бұрын
Well, it’s been 3 years. Did FCP honor their lifetime warranty on the oil?
@zed28652 жыл бұрын
Comprehensive illustration Unlike some other videos I’ve seen. 👍
@cyounger993 жыл бұрын
The best part of the vid is watching your son be amazed.
@marcmaxkintosh53557 жыл бұрын
Magnetic drain plug is highly recommended ECS Tuning sells it for $9.95.
@Max_Mustermann_3 жыл бұрын
Aluminum isn't magnetic.
@bradleygroenhof81833 жыл бұрын
@@Max_Mustermann_ it has a magnet on the tip
@Max_Mustermann_3 жыл бұрын
@@bradleygroenhof8183 With aluminium I meant the motor block, but I noticed the N54 has steel cylinder liners, so a magnetic drain plug might be a good idea.
@allmycarsisbroke3 жыл бұрын
@@bradleygroenhof8183 his point was that because the block is aluminum any metal flakes in the oil won't stick to a magnet. He apparently has never heard of a crankcase, pistons, etc.
@mattwalsh5976 жыл бұрын
Great video but I would always oil the o rings on the oil filter to make sure you won’t have any problems with it leaking or with getting the filter off
@KozmikEl77 жыл бұрын
Great video instructions as usual dude!! your the best 👍
@xMrxiHacks6 жыл бұрын
Hi I recently purchased a 09 e92 335xi n54 with 51k miles and need an oil change and was wondering which oil you would recommend to use was recommended Rotella T6
@tidakadaide6 жыл бұрын
Just about to do the first oil change on my 335i. I had to buy a hoist, because my jack didn't fit XD. Going to be nice and easy now!
@allmycarsisbroke3 жыл бұрын
Are you kidding? You hoisted your engine instead of just putting down wooden planks and driving into them to gain clearance? Yeesh. Great problem solving skills...
@tidakadaide3 жыл бұрын
@@allmycarsisbroke it's a bmw, hoist should come STD with them. And by the way, you hoist the whole car not just the engine lol....
@Haffizy177 жыл бұрын
Subscribed today, can you please create a video on how you are shipping the oil back to FCP Euro?Starting from putting the used oil into the quarts up to the packaging and approximate cost of shipping it back to FCP Euro? Thanks! I am considering switching on Monday after knowing this info
@BMWFanatic7 жыл бұрын
+brian doughty sure thing!
@B3nnywhit36 жыл бұрын
this channel is the bomb since I have a N55 =]. have you ever changed your transmission or differential oil on the car? keep up the good videos
@tamilpride3217 жыл бұрын
Nice easier than I thought will give this a go myself next week thanks😊
@Put1InYoHeaD2 жыл бұрын
I’m new here because it’s I just got my first 08 335i, but I have a serious problem. My coolant pump is leaking bad, like real bad, I have to refill it everyday because it’s my only vehicle for work I took it to a specialist and they want 2500 to fix, they said it’s the turbo line???
@BMWHOBO7 жыл бұрын
What shipping service do you use to send back the old oil and filter and approx how much does it cost to send back? Also do you need to tell the shipping service that you are shipping chemicals?
@Haffizy177 жыл бұрын
Did you get an answer to this?
@BMWHOBO7 жыл бұрын
brian doughty I did not.
@curtmosca16545 жыл бұрын
Depends on where your shipping from. I fit my oil with the big usps box, if it fits it ships and that is $20. My oil change is about $70 real cost is $20 after the refund. yes I tell the post office it is chemicals. Make sure it is fully secured and tops tight.
@WereJoebin7 жыл бұрын
I pour my oil in without a funnel. if you miss it gets into the top of your valve cover and pools it impossible to reach crevices. don't ask how i know
@notoriousshizzane26965 жыл бұрын
I did the same... and then changed my gasket for nothing.. while snapping a bolt.. I do it nice cause I do it twice
@zacharychristian97623 жыл бұрын
I used a shop vac and a small tube coming off the end of the hose to clean mine up when putting in new oil
@allmycarsisbroke3 жыл бұрын
Then why the f*** do you do it? Are you just a bit slow?
@DylanBB186 жыл бұрын
Hi I’m soon buying an 07 335i n54 75k on it, what oil would you recommend? I use for a daily, will have bolt one eventually
@m4u56 жыл бұрын
thanks for the video! I would like to know how do you jack up and put front jack stands, do you jack up from rear side point and then put front jack stand or you use front center point to jack up and put both front stands?
@ducewebber45617 жыл бұрын
Great job going through the steps. What MM oil cover did you use for to get to your oil filter. Been getting difference sizes from local auto stores, I have a 2011 335XI Twini Turgocharged BMW and trying to find out the cover I need to purchase to remove the plastic top to get to my paper oil filter....????
@BMWFanatic7 жыл бұрын
+Duce Webber Not sure on the mm size, but it’s the BMW OE part oil cap filter wrench
@BMWFanatic7 жыл бұрын
+Duce Webber other companies sell it too for around $20
@gas4money_465 жыл бұрын
How many of those oil containers do you put in? I just the got the set with 7 bottles
@204carguy7 жыл бұрын
great video (y) will use this for my new used 335i
@joshmarauder2 жыл бұрын
what oil weight is recommended for 08 n54...people sayin 5w30 some 0w40
@theazndudelivefree6 жыл бұрын
Does FCP really provide Lifetime Replacement Promise for the oil? buy one set, and next set is free? have you actually done it before?
@allmycarsisbroke3 жыл бұрын
They do but by the time you pay to ship you oil back it's pretty pointless.
@Thomas9988222 жыл бұрын
@@allmycarsisbroke not at all..buy your FCP orders using Paypal sends you a free return shipping label for any order you've made (one per month limit). Free oil and free return shipping is never pointless
@LS2kid7 жыл бұрын
I was wondering if you had a proper way to clean the engine bay. My car sits for awhile and everytime I pop the hood the engine is caked with dust. Any help or even a vid would be awesome.
@DolphinDivingChamp7 жыл бұрын
LS2kid spray it with water and then scrub it
@wazi136 жыл бұрын
Hey Lee, I enjoy the videos! Almost time for an oil change on a 2011 e90 i purchased at the beginning of Summer. Was wondering if you’ve ever tried out Liqui Moly oil products? Heard they were excellent, made in Germany and even better than genuine BMW oil, but these opinions were coming from anonymous people in message boards so i’m not so sure what to think. Any insight or info would be greatly appreciated! Keep up the good work!
@BMWFanatic6 жыл бұрын
Just switched to Liqui Moly 😀 I uploaded a new video on that just the other day
@wazi136 жыл бұрын
BMW Fanatic it’s like you read my mind! Thanks man!
@antsantos9952 Жыл бұрын
So the car doesn’t need to be level out for oil to drain ? I get a oil change at Valvoline and car is on even level ground
@JasonTurcotte7 жыл бұрын
Nice video. I've got an F30, but imagine the process is pretty much the same.
@BMWFanatic7 жыл бұрын
Jason Turcotte yep!
@mlidie7 жыл бұрын
Been trying to find a solid jack lift and jack stands. What is your setup? Do you jack up under the front middle or off on the sides? I’ve seen many videos that do both. Seems jacking up the front middle is the preferred method
@adriangutierrez95826 жыл бұрын
Harbor Freight is cheap and they carry low profile jacks.
@UnwanaUdoh3 жыл бұрын
Excellent job 👏
@SpeedyMLS6 жыл бұрын
My BMW shop have used 5w-40. You are using 5w-30. What is the difference? I live MN where winter can get very cold. Then 5w-40 better?
@nswiss197516 жыл бұрын
Cold thin hot thick
@euko68764 жыл бұрын
Love your vids!! Care to explain a little further on how this refund process works?
@Robert_J8917 жыл бұрын
How do you keep your engine bay so clean? Do you use any products, and if so what do you use? I live in northwest PA so obviously salt on the roads is horrible, and I want to clean it before things start corroding.
@BMWFanatic7 жыл бұрын
Robert Edwards I need to do a full clean again, but I detail it once a week and keep it up. Adam's in and out Spray for the Shine dressing.
@BMWFanatic7 жыл бұрын
Robert Edwards Here's what I use - see the description within this video kzbin.info/www/bejne/j3iTfXikpK2fn8k
@Robert_J8917 жыл бұрын
Thanks, I finally saved up and bought my first BMW it's an 09 535i but I want it to stay clean inside and out. 👍🏼
@SergiuYojja5 жыл бұрын
Love the house and the garage
@thatniqqapablo136 жыл бұрын
Hey man so how long does it genuinely take to receive the oil? I've been using liqui molly but lifetime warranty sounds good although I do daily my 335i and wouldn't be able to leave it at home for more than q couple days
@cuttingedgecool72356 жыл бұрын
Incredible info about the lifetime warranty on oil at fcpeuro.com!!! Thank You very much!!!
@bayareaarab7 жыл бұрын
I noticed every video you make your son always wondering around . 😂😂
@BMWFanatic7 жыл бұрын
+BayAreaArab he's always playing outside
@dragger1687 жыл бұрын
Great video. Can you please make a video on how you put the car's jack pads on your jack stands? Thank you
@DolphinDivingChamp7 жыл бұрын
dragger168 Lift from the front and rear axle and then put the jack stands on the lift points
@dragger1687 жыл бұрын
I'm really curious how the jack pad sits on the jack stands.
@mlidie7 жыл бұрын
dragger168 same... been trying to figure this out and what his jack lift and jack stand set-up is. I’ve found a ton of decent lifts and stands but would prefer stands that fit the jack lad adapters the best. Hoping his setup is best!
@johnnylankford61217 жыл бұрын
how did you mount the tablet??? Looks clean and thanks for the vid..
@michaelcallow20186 жыл бұрын
JOHNNY LANKFORD I
@laxdnumber36 жыл бұрын
Can you make a video on how you keep your engine bay looking so pretty? I own a 335i as well, new to owning a turbo vehicle--do you have any special way you clean it? I have hesitation to high pressure rinse the motor with a turbo on it. Thanks!
@BMWFanatic6 жыл бұрын
Here’s what I do to keep it shined up kzbin.info/www/bejne/l3LSo4yEfqiDeKs I’ll be doing a cleaning video in the spring
@allmycarsisbroke3 жыл бұрын
You shouldn't pressure wash any motor, turbo or not.
@supersnake50037 жыл бұрын
I went to my local BMW dealership in town to purchase oil for my N54 and they had told me that they had discontinued making the 5W-30 Synthetic blend and sold me the new 0W-30 Synthetic blend, i wonder if its only around my area, do you have any insight on this?
@BMWFanatic7 жыл бұрын
supersnake 500 Let me double check
@BMWFanatic7 жыл бұрын
supersnake 500 What's the part # on the bottle or receipt?
@armendsahiti49407 жыл бұрын
Do an ultimate coolant flush plz
@david-tracy7 жыл бұрын
i 2nd this
@vintagetrk2 жыл бұрын
What BMW Scan tool do you use? I did'nt see that in the links.
@BMWFanatic Жыл бұрын
I have a lot of them honestly lol
@vintagetrk Жыл бұрын
@@BMWFanatic I have an Ancel BM 700 and an Autel
@davidboyles4285 жыл бұрын
Do you HAVE to have the adapter for the filter cap? Any other methods?
@chalprin6 жыл бұрын
Does anyone know why the cage part of the oil filter cap is spring loaded ? Does this open and close to allow oil into the motor? Seriously why is there a spring in there ?
@ThisLaoGuy6 жыл бұрын
which is better for performance. oem vs castrol vs liqui moly?
@vw35765 жыл бұрын
Shell Rotella T6 thank me later. It's a diesel engine oil. I used Amsoil religiously. Tried T6 AND WHAT A DIFFRENCE
@ant1353 жыл бұрын
the only question I have is how much oil do these things really take? I've heard some say 7 quarts other's say 6.9 you said 6.8 and I called BMW and they said 6.5 like really why soo many different numbers?
@John-yq9qx7 жыл бұрын
Are you running catless downpipes. If not how do you hit 18 psi!!?? In your map tutorial you said not to use map two with 14.5 psi without downpipes. How can you hit 18 psi without downpipes.
@daviddavilajr5467 жыл бұрын
Great video! Where did you get the pick?
@BMWFanatic7 жыл бұрын
+DAVID DAVILA JR What pick are you referring to?
@daviddavilajr5467 жыл бұрын
BMW Fanatic thanks for responding. I'm referencing the red handle pick you use to remove a rubber seal at the 6min mark in the video - thanks
@Isaac865576 жыл бұрын
DAVID DAVILA JR you can get a set at harbor freight. I think they are called o-ring picks.
@YouTube.TOM.A3 жыл бұрын
thank you for this
@oscarvee54154 жыл бұрын
I don’t have that blue dot so how do i know how tight to close ? i have a torque wrench
@sonnynguyen91732 жыл бұрын
Didn’t see you mention torque specs for tighten the drain plug and canister housing.
@Thomas9988222 жыл бұрын
25 +5nm says right on the cap, clear as day
@bg-se7rq6 жыл бұрын
U don’t get oil leak(s) with that traditional oil fill cap? BMW calls for the new one ... separate gasket needed too. Nice video -follower
@BMWFanatic6 жыл бұрын
New gaskets were swapped on
@zamx966 жыл бұрын
Yiu forgot to mention the torque specs for the oil filter and the drain plug. And also drive forgot to drive around a little and re checking the oil level. Correct me if I'm wrong, great video regardless!
@Whiboi5 жыл бұрын
Mohammad Zohaib oil filter doesn’t really have a torque spec. It’s very obvious when it’s seated, it just stops turning and you can see it seating
@ericg4x44 жыл бұрын
18.5 ft-lbs for both!
@Put1InYoHeaD2 жыл бұрын
Btw way the hydraulic on my hood doesn’t not work, 🤣🤣I thought it was kinda funny how u snapped ur finger and opened it.
@aragornelias6 жыл бұрын
Do you jack one or both sides?
@Rain9_95 жыл бұрын
what you perfer is better twin power turbo oil or liqui moly?
@Whiboi5 жыл бұрын
Mr.Runner Bmws oil is still made by Castrol as far as I know but castrol can hardly compare to liquimoly imo, just got an n54 4 days ago, said they changed with Mobil one so i am definitely gonna change soon with leichtlauf liquimoly and ceratec (I highly highly recommend ceratec, 20$ a bottle and you need a little more than one but it’s incredibly effective)
@Stancedude16 жыл бұрын
Automatic transmission fluid change?
@tommyheady317 жыл бұрын
What weight of oil do you us in your 335i ?
@joseest95257 жыл бұрын
I just bought the castrol edge sae 5w-40 is that fine?
@BMWFanatic7 жыл бұрын
+Insomnia Toxicx it’s not BMW long-life approved - I would go Motul 5w-40
@ericg4x44 жыл бұрын
Castrol Edge 5w-40 is BMW LL-01 approved, it’s a fine pill to use!
@stephenlozano28167 жыл бұрын
If I'm not using the BMW oil what is the next best equivalent?
@BMWFanatic7 жыл бұрын
+Stephen Lozano Motul Xcess
@david-tracy7 жыл бұрын
have you ever tried redline 5w30? it reduced the temperature my 335 runs at by about 15degrees fahrenheit
@TheGrimSkeeter7 жыл бұрын
Im a store salesman that makes aprox. 500 a week. How much would you recommend buying one of these same year BMW as far as maintenance cost and reliability?
@BMWFanatic7 жыл бұрын
Bad Drivers on Cam I'm currently making a new video on that very same topic for this week 😀
@TheGrimSkeeter7 жыл бұрын
BMW Fanatic Awesome! Cant wait
@BMWFanatic7 жыл бұрын
Bad Drivers on Cam I do cover those topics on my channel tho! Check my playlist videos!
@TheGrimSkeeter7 жыл бұрын
BMW Fanatic great! I just found about your channel, im gonna watch your videos tonight 😁
@BMWFanatic7 жыл бұрын
Bad Drivers on Cam sweet 👍🏻 welcome! 156 videos in all lol
@hewes42395 жыл бұрын
Is that oil full synthetic?
@glamoc00005 жыл бұрын
How frequently do you do it?
@kevper967 жыл бұрын
So we just basically put our old gathered oil from the pan into the empty FCP Euro oil bottles and ship them back to them and we get refunded?? WHAT? You got to be kitten me!
@Motorsportsgeek6 жыл бұрын
seriously, ive wasted so much money on mobil one
@standeman324 жыл бұрын
How exactly does the refund process even work, Ive got old oil from them, just not sure what to do lol?
@euko68764 жыл бұрын
@@standeman32 same here. And about to order another kit.. have any ideas how to get the refund?
@standeman324 жыл бұрын
@@euko6876 not sure with the covid thing going on how easy itll be to be honest.. were you able to get it figured out man?
@euko68764 жыл бұрын
@@standeman32 lol nah not yet, still sitting in my room. I keep telling myself I'll email them but haven't gotten around to it
@1300l7 жыл бұрын
Is the genuine oil Pentosin?
@iysisrose7 жыл бұрын
You were using 0w-40 prior ? Why the switch ? (aside the fcp plug) Thanks .
@BMWFanatic7 жыл бұрын
+IYSISNASIR FCP Euro doesn’t carry the 0w-40 for the oil warranty- I’m now running 0w-40 since it’s coming on on winter time
@jacobsvintsitsky61123 жыл бұрын
What car Jack do you have?
@keeganadams67625 жыл бұрын
why did the link switch to 0w30 oil?
@s2foe7 жыл бұрын
Liqui Moly is life
@david-tracy7 жыл бұрын
how come?
@kimmywong99956 жыл бұрын
can I use 10w60 for my tuned n54?
@Latinblood596 жыл бұрын
Kimmy Wong 10w60 is too thick for the turbos
@theazndudelivefree6 жыл бұрын
Thats for the M3, DO not use it!
@stuartlord76405 жыл бұрын
Only if you are on a track, perfect for many back to back laps but dump it straight after. The oil will only be protecting your engine correctly at very high temps, eg track days. 0-40 Mobil 1 in opinion is the best n54 oil of them all.
@asdlkj387 жыл бұрын
how often you change your oil ?
@RealDoce17 жыл бұрын
Volodymyr Stepanenko every 6,000 miles is recommended but i do it every 4,000 miles
@mareksumguy18876 жыл бұрын
Can someone please explain to me this lifetime replacement business on OIL?!
@BMWFanatic6 жыл бұрын
Use it, order the kit again and then send back your old oil for a refund 😀
@mareksumguy18876 жыл бұрын
Thats the most fucked up business model iv ever heard.
@E92Danny6 жыл бұрын
Marek Sumguy not really, they recycle the oil and reuse it a lot of people don’t return the oil within the time period as well so either way they aren’t really hurting
@boonce65063 жыл бұрын
Can somone tell me why I did this and f old oil started coming out of the car in a whole different place
@allslitup7 жыл бұрын
I 2nd what kevin just said. You really just ship the old oil back to them and they send you free oil no questions asked? That seems kinda crazy...
@BMWFanatic7 жыл бұрын
+SKiTHx SKiTHx you buy the kit first, use it, then buy the kit again and then return the old oil from your first kit then you'll get your money back.
@jackcharlie93194 жыл бұрын
how much oil do these engines take?
@HealerRoulette6 жыл бұрын
With this kind of engine, isn't it generally suggested that you take the oil filter housing cap off first? The car has a drain function that makes all the oil go to the bottom oil pan for easy draining.
@cubekz874 жыл бұрын
Do You know what is Ravenol or ROWE ? OR oem only? 😂
@notoriousshizzane26965 жыл бұрын
I highly recommend a funnel... I spilled some oil and it leaked down to the coils/spark plugs. I noticed some stuttering and figured I should change the plugs and coils... saw oil on them and was like what the hell??? Asked a guy at the shop I was working at why I had oil on my plugs came and looked and said my valve cover gasket was leaking... spent hours to change it... and the gasket was in good condition. Changed it anyways since I had a new gasket and snapped a bolt on the cover being a dumbass and not following the torque specs... 10 nm or so I saw some say 8.5 but I think 10 wouldn't hurt. Now I have to special order a bolt and do it all over again... yay... all because I spilled a little oil around the fill cap.. so ya, use a funnel.
@jackf84172 жыл бұрын
People here have asked about oil capacity. It's 6.8 qts. Also, you should always add a bit of oil to the filter reservoir which helps to prime. I simply use 7 qts and pour a small amount into the filter reservoir for priming purposes. Finally, the torque value for the oil pan bolt is 18.5Nm and the filter housing. 25.5Nm.
@lsatq5 жыл бұрын
shouldn't you drain the oil when the engine oil is hot?
@euko68765 жыл бұрын
Seriously?
@bimmerdadd5 жыл бұрын
My oil filter cap separated from the cartridge O.O! I ended up making a video about that haha, make sure you don't throw it away on accident. There is actually a TSB for it.
@mareksumguy18876 жыл бұрын
The car is supposed to be LEVEL when draining the oil!.
@MOBROOKS5 жыл бұрын
You sure?
@flaquito16843 жыл бұрын
@@MOBROOKS 😂😂
@gnosticorderofthewisecounc18123 жыл бұрын
Gen-you-wine lol
@luisnava32395 жыл бұрын
6.8 quarts or liters?
@RealdealSkip3 жыл бұрын
Quarts and 6.5 quarts is max for n54
@TheTruelakersfan7 жыл бұрын
Why is the oil always black!? No matter if you change at 5k intervals?
@adriangutierrez95826 жыл бұрын
Turbo engines run hotter, thus turns the oil black over time due to it being hotter than normal NA engines.
@badboygto4 жыл бұрын
i change mine every 1k on the dot :)
@aster50317 жыл бұрын
5/5
@BMWFanatic7 жыл бұрын
+as ter 👍🏻
@dubwizezt7 жыл бұрын
Yo so its 6.8 liter not 6.5?
@Haffizy177 жыл бұрын
Manual says 6.5 Liters and 6.9 Quarts
@juicepascal28142 жыл бұрын
I accidentally put 10w30 instead of 5w30 in my 335i I’m scared 😅
@BMWFanatic Жыл бұрын
You’re fine, but you can change it out to 5w40
@nswiss197516 жыл бұрын
You didn't check it
@brandonwilks23076 жыл бұрын
only way to check it is digitally after the car is already running :/
@mareksumguy18876 жыл бұрын
I can't believe you use BMW branded oil!. Thats just disgraceful! OEM oil's are always overpriced garbage.
@euko68765 жыл бұрын
What do you use? I just got the luqi moly molygen 5w-40
@randkamza12065 жыл бұрын
Terrible video. 1. The lines on the oil filter cap are just oem marks, nothing to do with it being completely closed or open, you do know your torque would be different depending on what position the cap was when it started threading, right? Im sure their is an OEM recommended foot pounds spec. 2. Lower the car on level ground to drain out all the oil 3. Dont add all your oil and assume it's correct, go about 1/2 quart under, measure on level ground, then correct. The car never looses 100% of its old oil in a change.
@tdrane_E905 жыл бұрын
He obviously said he’s never had an oil filter cap leak soo how is he wrong mr know it all
@joseph43336 жыл бұрын
6.5 or 7quarts?
@BMWFanatic6 жыл бұрын
6.8
@alejandrogeorge72656 жыл бұрын
BMW Fanatic what happen if i put 7? I forgot to stop on my last quarter just today, should i drain a little or its not a big of a deal?