The Ultimate Build & Setup Guide for HD FPV!! // MurdersFPV

I put a lot of time and effort into this video, and I really hope it helps many of you to enjoy the FPV hobby and get into the air.
Thank you to my sponsors for helping me do what I love!
- T-Motor
- Quadmula
- Gemfan
Timestamps
Build tips/recommendations:
Solder Station/heatgun/Helping hands 5:31
ESC/motor layout 6:00
Velox Flight controller/RX tips 7:18
Multimeter checks 8:10
First power on/TBS RX binding 9:06
Final build tips 11:42
Firmware/software programs:
Betaflight 13:11
BLHeli_32 14:10
PID Toolbox 14:42
Blackbox Explorer 15:06
TBS Agent M/firmware update 15:38
DJI Assistant 2 (Consumer Drone Series) 17:23
DJI Goggles/Air Unit binding 20:53
Drone setup/config:
BLHeli_32 settings 22:59
Betaflight/firmware update 26:10
Ports tab 30:27
Configuration tab 31:23
Presets tab 36:27
PID tuning tab 39:31
Receiver tab 47:09
Modes tab 48:30
Motors tab 51:34
OSD tab 55:28
Quadmula Siren F5 Split Build Video:
• Quadmula Siren F5 Spil...
Betaflight 4.5
Quadmula Siren F5 Split Freestyle Frame
T-Motor Velox F7 SE Flight Controller
T-Motor Velox 50A 4in1 ESC
T-Motor Velox V3 P2306 1950KV Motors
Gemfan Hurricane 4937-3 Props
DJI O3 Air Unit
TBS Tracer Nano RX
Five33 1380mah 150c 6s Lipos
Radiomaster TX16S Max AG01 Gimbals
DJI Goggles 2
Edited in Adobe Premiere Pro
Follow me on social media!
linktr.ee/murd...
Inquiries for collaboration!
[e-mail]
#fpv #fpvfreestyle #drone #build #tutoria #guide #betaflight #dji #djifpv #quadmula #sirenf5 #tmotorfpv #gemfan #teamblacksheep #five33 #radiomaster #diy #stem #education #electronics

[@FREEDOMFPV84]

I cant wait for that tuning video i really want to see how you tune your quads man

[@mikalaitinen2976]

I copy those settings and my apex fly nice. Have a great summer....thank you.

[@MurdersFPV]

Awesome, I'm glad to hear!

[@almanacgrauer]

Great video! I am just starting on the hobby, didn't had my maiden flight yet but I appreciate those type of videos so much.

[@szakalszaleniec]

can't wait for PID/filters tuning video !

[@lambo_drives]

Christmas came early folks, Saint Nic bringing in the gifts (and it isn't even July!!) Love your walk through here... as i'm inheriting friends' Analog rigs while I'm stepping into FPV (forcing myself to start with some 2016 basics) your walk through in Betaflight was great and cleared up number of questions and opened many more to explore. Thanks, Nicholas! - Brett

[@ZiAfpv]

My dude, I tried props out for the first time today and Im never looking back thanks for the tip, honestly didnt ever even think about it before but the difference is crazy.

[@MurdersFPV]

The difference is wild when you talk about recovering from hitting shit.

[@CyberiaFPV]

ive been trying to figure out how to tune this exact stack and frame, thanks for the tune tips. will be waiting for filter tune videoo

[@balc3r]

Thank You! 💪

[@GarethDix]

The thing I love about quadmula frames other than they come with everything you need... is that unlike most frames they have really thought about where the cap goes. when I was dry fitting the double cap in my F5 I honestly didn't think it was going fit... but it's perfect! Honestly though I love these videos you do... it got me into building a year ago, I guess I'm going to learn how to tune today from this too!

[@MurdersFPV]

Giving back to the hobby is important to me. Videos like this are hard work, but it's worth it if even one person can be helped.

[@Krash_fpv]

Do they come with prints?

[@MurdersFPV]

@@Krash_fpv they do if you order the prints with it. They come in a really sick forest green color. They have their own official site with all of the available 3D prints here: www.printables.com/@QUADMULA_373548 Here is a link to my Google Drive that has additional STLs that I've made: drive.google.com/drive/folders/1z3__ksROZxzBgrc758uu9GftnuuaIUop If you're in the US, Mark McCollum is the guy to go to if you need 3D prints made. facebook.com/share/tynd84kBHLZab9dC/?mibextid=qi2Omg

[@FREEDOMFPV84]

Awesome video man I love this that's my favorite part of fpv the building and tuning it makes you appreciate your quad way more plus I crash alot so I need to know how to fix it I never bought a bind and fly my very first quad I built my self thanks man great job love it

[@FREEDOMFPV84]

And ate those antennas you have on the goggles 2 worth upgrading to rather then the stock ones

[@fpvkevlar8101]

Great video

[@josftm]

Nice video bro!! Sevilla is waiting your rip again 🔥🔥🔥

[@RCRitterFPV]

good stuff... thanks for putting this together... great new to fpv synthesis vid.

[@CasualFPV]

The video Ive been waiting for... now do the tuning one!

[@MurdersFPV]

I gotchu, bro. I'm actually down in VA again this week. I plan to work on the tuning video this weekend and hopefully have it out by next week.

[@FlyZoneFpv]

Really nice video my dude . Very informative 👍🫶

[@VitriFly]

Zang! Great Vid bro.

[@MurdersFPV]

This is me always trying to drag more people into spending their hard earned money on the hobby. 😜 I need more pilot friends! Hah. #oneofus

[@dizzydeanfpv45]

Thanks for all the info...what do u think with almost all our stacks and motors(m-30) plug and play...you can ptretty much build now withour soldering....#1 pilot!!!

[@MurdersFPV]

M-30 is definitely a great option.

[@dizzydeanfpv45]

@@MurdersFPV yeah I watched a five33 video where Evan changes out a motor in 2:30...and back in the air...lol....love the tech part of this hobby!

[@Krash_fpv]

I would kill for a quadmula f5 mini split or a f3.5 split they've been out of stock for forever

[@MurdersFPV]

I know, bro. They had a bit of a rough time getting more stock at the level of quality they demand. They are hoping to be back in stock very soon.

[@VitriFly]

@@MurdersFPV @desyncFPV Its estimated they will have the proper carbon by the end of this month!

[@Krash_fpv]

The white prints look great.....also I run a double cap in parallel is there any benefit to running the 2 caps in series?

[@MurdersFPV]

Running in series isn't needed for these smaller voltages and this application. Running in parallel just smooths out the voltage even more than with just one cap. Also stores more voltage on demand. To me, it has a very slight improvement for consistency in throttle. Most people don't notice the difference, but I prefer it.

[@AdamWeatherall]

Clean build nice 👍

[@hprompt166]

great video, thx for all the tips

[@SimplyGod100]

Hey do you happen to know when will Quadmula restock? Also, great video btw, I wanted to build a 3.5 inch but had to buy a volador because Quadmula had no stock

[@MurdersFPV]

I was told this month.

[@gtodua]

Hi, with your money, which freestyle rama would you buy? thanks

[@SbangFPV]

Does Quadmula have anything to say about when Siren F5s will be back in stock? They’re always sold out

[@MurdersFPV]

I was told this month.

[@xxsorrowxx1]

I know it seems crazy that a frame manufacturer has no frames been wanting one for last few months ended up getting the 2fiddy to make a sub 250

[@christianibarra6822]

@@xxsorrowxx1 I reached out and they mentioned their building was affected by some earthquakes and shut their production down, they were moving to a new facility

[@SbangFPV]

@@MurdersFPV hopefully. But we all should be able to see why there’s a shortage of carbon fiber sheets. Where are they being sourced instead. Rough Times!

[@Juicy-J-FPV]

what happened to the google drive you had with the STL files? They disappeared?

[@MurdersFPV]

drive.google.com/drive/folders/1z3__ksROZxzBgrc758uu9GftnuuaIUop