The Ultimate lambretta Rustoration project!

Рет қаралды 4,272

Kickback Garage

Күн бұрын

Пікірлер: 21

@victorhawkins3461 7 ай бұрын

I'm all in! Here we go...

@Avantone 8 ай бұрын

Looking forward to this one. I’ve got one in the same condition and after as many tips and tricks as possible on bringing the paint back 😊

@shaundewar7397 8 ай бұрын

Rather than using a chemical rust converter you could use 0.0000 wire wool all over, which will remove loose rust and loose paint. It will also matt the remaining paint which can be brought back with T Cut. Then use boiled linseed oil cut thinner with methylated spirit

@kickbackgarage 6 ай бұрын

Hi Shaun, Thanks for the heads up on the fine wire tip. :)

@ScooteristFellini 8 ай бұрын

Great job fellas! 🥳🛵🧰

@kevinhendon 8 ай бұрын

Great vid Rob, looking foward to this nice project 👍👍. Lovely Scooter

@thomaskunkel7460 8 ай бұрын

I used the MB ringnut spanner once for tightening. And guess what happened. It just sheared off. Now I‘ve got one from Jockeys Boxenstop, which seems to be up with its job.

@derekwalton6498 8 ай бұрын

Hi Rob, there’s a product called ‘Evapo-Rust’ by CRC. It’s excellent at removing rust without damaging paintwork and worth considering in my opinion. Great video as always and look forward to your progress.

@heislpartie 8 ай бұрын

I have an early 61‘ li125 with the round horncast. They used the round horncast until early 61‘.

@neilbrown6789 8 ай бұрын

What a cracking scooter, going to proper enjoy this series. Brilliant Rob.

@danielharrison6427 8 ай бұрын

Hi I have used a product called Anchor Wax for patina which works really good this might be an option for you I would definitely look it up 👍

@kickbackgarage 8 ай бұрын

Yep. After we have treated the rust.

@stevebgp200 8 ай бұрын

Definitely take some of the loose rust off, as for rust killer, it’s a bit strong I would say on a 60 year old frame, try a little bit first. Do the welding before the rust treatment if you are going to use it.