The Ultimate Sig Sauer P365?

I've created what I think is the ultimate p365 build. Thanks for watching!
Build
Holosun 507k
amzn.to/3I5yhaN
Tac Dev Pro Ledge Rail
tactical.dev/collections/all-...
Tac Dev base pads
tactical.dev/collections/all-...
Herrington Arms Comp
herringtonarms.com/collection...
True Precision Barrel
true-precision.com/barrels/si...
Streamlight TLR7 sub 1913
amzn.to/3FmxqjW
Tac Dev Key for TLR7 Sub
tactical.dev/collections/all-...
Mckinatec Kina Flex
Buy your holster here
EDCGearandGunReviews for 15% off your order!
www.mckinatec.com/discount/EDCGearandGunReviews

[@back2schoolfool]

I feel like most of the guys commenting don't realize how small the P365 is... Even with all these mods this things is still tiny. Definitely way smaller than a P320 X-Compact which people CCW all the time. Gun looks great dude 👍

[@overlandedc]

Exactly! And it shoots so flat for such a small gun. I shoot it better than my Glock 48MOS which is bigger.

[@TazyBaby]

@@overlandedc I have mine set up very similar but without the gas pedal, I love your set up though! I have a short of mine on my channel if you want to check it out, I swapped the laser for a light of the same design

[@marklags2396]

Internet: We want smaller sub compact guns with more capacity and better concealment. Sig Sauer: Here's our new P365. Internet: We want bigger sub contact guns with even more capacity and little concealment. We are a crazy community aren't we.

[@jsr-uz3oj]

The capacity and caliber and thumb safety issues are my favorite among the stupid issues the best gun is to get is the one you shoot the best the same goes for the caliber you don't need 12 or 15 round for self-defense.

[@jasonbias3288]

@@jsr-uz3oj when adrenaline is pumping and multiple people are attacking, you'll want 20

[@Fakechainboiiieeee]

@@jasonbias3288 ya everyone runs into gun fights like this at least once in their life

[@kashifjones6007]

@Fakechainboiiieeee Yea hopefully you never do but the point is you want to be ready ..you don’t know if it’s one attacker or multiple

[@chrisvickers718]

Just got my Herrington comp today. It looks very good in person. Also installed the tactical trigger as well. I was skeptical but the trigger kit is great too

[@jimmymassie8420]

I use a Mccinatech holster with my P365XL with Icarus precision grip module. They offer a lot of options for the P365 pistols. I’ve been using Tactical Development base pads on my P365XL since I bought it, Great products

[@turtlejon2002]

I absolutely love this the setup on the 365 that’s what I have been looking for since I got my p365 fcu

[@settleschris1965]

Those holsters are awesome!

[@THATMOFODIRT]

Good stuff

[@user-jv4ic8rh4d]

The SIG foxtrot1x fits this rail system perfectly and you don't need to buy the special key like the tlr7-sub. You can slide it into 3 dif positions. Giving you more options. I have a holster on order for the tlr7-sub. Let you know if it fits.

[@Swampytheroot]

I hate to ask this, but where are the details of your complete package? I looked through the comments and didn't see them. Tonight I put a Griffin barrel and micro comp on an XL that I traded for recently. Looking forward to see how well it works (or doesn't) tomorrow. Handsome piece. Good presentation.

[@alfredoserna4408]

You should get the gold flat trigger from sig to match your barrel, bad ass build though bro!

[@jeremybermender6322]

Have you found an improved/upgraded slide stop lever?

[@rquinn1914]

Which do you prefer, the 365 or 48?

[@HeebieKikeberger1025]

Guessing you can’t put a suppressor on this with the ledge, in my mind that makes a removable comp a bit less useful. I’d pick the ledge and comp over a can.

[@brandondane4777]

How the difference between the hc365 p vs hc365 I see itv has holes in the side but which feels best. Less recoil

[@Diddley-js6lf]

Way to busy for me. But hey to each their own. I have the 365 and a XL both with Lazer light/ Light Combo by Streamlight works very well, the XL has a Romeo X on it as well I have converted over completely to the XL. Optic worked great for me. I actually love the Compensator.

[@TazyBaby]

I agree with the too busy but with a smaller more flush light it would look pretty good, I have something like that as a short on my channel if you want to check it out

[@TacticalDev]

Sick! Agree on the gold…not my first choice…

[@quesoranchero]

Here i am wanting the gold! Going to look I to your stuff based off this video! Thank you!

[@frednavarro8667]

Sooo does it shoot?

[@wbwills2]

Where’s the LED’s & curb finders?

[@alabamatrout6985]

So just to be clear… the tac rail is a gas pedal and a 1913 adapter for the proprietary rail?

[@quesoranchero]

Looks like it. Pretty unique!

[@victorortega2718]

Hey but you ever have issues with it comped? Like any failure to feed or not ejecting brass properly etc? It being a smaller gun i was worried to comp it so just wanted to make sure i can still shoot it with a comp and not worry about it messing the actuall spring and gun up

[@overlandedc]

None at all

[@aem226]

So you could take the regular 365 and put it in the xl grip module and get that same flush looking for correct?

[@overlandedc]

Yes, but you'd have to get the 12 round xl mags as well.

[@aceboogie57]

Im late to the party.. but can i take my p365 slide and put on a xmacro grip module? All i have to do is switch the barrel and add compensator?

[@overlandedc]

Yes you could do that absolutely

[@orenji1625]

hoyl shit, this is essentially what i'm trying to build

[@dadbod4207]

hello! i love your gun! so much so that i am building the same exact build! what did you put as your "gun" when ordering your holster from mckinatec? I am also using the tac dev pro ledge rail with the herrington arms comp. I just want to know if you ordered your holster for the 365xl or the standard 365 given that you put the xl rail on the standard length gun. thank you!

[@overlandedc]

I think you’ll be fine with the standard with the rail but I’d reach out to Dan on Instagram, he’s very responsive

[@brenthedani6076]

Mckinatec didn't have a drop down option for herrington arms compensator. Will this build on a p365xl fit in the holster?

[@chrisharlow6849]

So I'm confused, I have a 365, I want to buy a 365xl slide true barrel and a spring. Will that all slide on my existing 365 lower or do I need a different fcu. I like the idea of a longer slide and being able to add a optic easily.

[@brianhuynh0503]

Yes you can run the xl slide on a regular 365 frame

[@gerardjoseph5572]

nice video, i have a question. Like you I want to be able to remove my comp when I want my pistol to be super concealed. I want to make sure I heard you correctly that you didn't lock tight to the barrel. If anyone in the comments that have the answer to this question feel free to answer as well. Again the question is do you need to add lock tight to the barrel in order to function the comp?

[@overlandedc]

No loctite on the barrel, their are two set screws that you apply loctite to

[@alextievsky9375]

Have anybody played with the newer Herrington arms comp I think it’s called P2. It had 2 top ports and nothing on the sides.

[@vitalyyuro]

Do you think this comp would work with the Springfield armory hellcat with a true precision threaded barrel?

[@overlandedc]

No it’s not made for that gun

[@Andy-ot8cu]

I would love to run the pro ledge and tlr-7sub light combo, but I can't find a good holster for me. After running a Tenicor SAGAX LUX and Certum LUX for the past few years, no other holster compares.

[@overlandedc]

My mckinatec Kina flex is really comfortable

[@Andy-ot8cu]

@@overlandedc unfortunately, it won't be for me. There is just too much kydex below the light, making it unnecessarily bulky there. If it followed the lines of the tenicor or t rex sidecar 2.0 holsters I'd be all over it.

[@karle466]

So you can use the p365x and put the compensator and the attachment rail for a p365xl?

[@overlandedc]

Yes

[@justinalvarado6706]

I have the same set up with the same comp on my x slide and true barrel and every time I shoot with the comp on the empty shell gets stuck in the eject port on every shot. Any ideas or suggestions?

[@overlandedc]

Lighter recoil spring

[@justinalvarado6706]

@@overlandedc I tried looking for one because a friend told me that can be it but none of the gun stores near me have one. Any idea of a good place to find one?

[@ronrobles2321]

Just want to know where did you get the Holster with gas pedal???

[@overlandedc]

Mckinatec holsters. Use code in my bio for a discount

[@OnesAtYourParty]

So, if you want to opt out of an optic cut on the basic p365 slide in order to put their Romeo sight on it, you can purchase the p365x slide and put it on the p365 lower? If so, doesn’t that mean you’d be spending an extra 300 dollars just for the p365x slide in addition to already buying the full p365 pistol, because I don’t think you can purchase a 365 lower separately. Let me know. 17 and researching for when I turn 21! Thanks

[@overlandedc]

You can actually buy the Sig fcu by itself as well as the 365x slide.

[@davidhudson2527]

@BitcoinDeo the P365X sells with and without the Romeo 0 installed. The P365X without the Romeo 0 gives you the option of no optic or installing a variety of different optics later. The "lowers" (grip modules) are sold separately so you can interchange the P365, P365X and P365XL grip modules with all of each other's slides. Many changes can happen in our lives in 4 years. Good luck.

[@OnesAtYourParty]

@@davidhudson2527 I think you can just buy the FCU, p365 Grip Mod, P365x Slide and other slide parts like the barrel and you’d be good

[@mendesfv]

Looks great and I’m sure it’s an awesome nightstand gun, but does anyone even make a holster for a gas pedal that big??

[@overlandedc]

Yes a few companies do. Mckinatec holsters is what I’m using

[@theriddler4914]

You should look into upgrading to the Magguts magazine internals. They add +2 to your magazine without adding any additional length. It is a must have upgrade.

[@overlandedc]

I’ve thought of that but I’m concerned about reliability

[@theriddler4914]

@@overlandedc I have used theses for years in a few different guns and have never experienced any issues. They are worth upgrading.

[@bobroberson9286]

@@overlandedc I have a 14-rd kit for the 365xl 12-rd mag and have had no problems, also Tactical Development has a base plate specifically designed for use with this 14 round spring kit and in my opinion IS A MUST if you make this change. 👍

[@overlandedc]

@@bobroberson9286 I'll pick one up to give it a try. I'm actually at shot show with Tactical Development funny enough

[@bobroberson9286]

@@overlandedc that is pretty good, be sure to get the TD pase plate for that spring kit, the one they furnish is👎👎

[@reidseghers3013]

Who did stipple

[@rivercityviews48]

What holster are you using that accommodates the gas pedal

[@overlandedc]

Tac Dev has a list of them on their site, as well as some available to purchase. I’m personally using McKinatec

[@YouBoyJpres]

❤❤

[@scottmoore5839]

Can you run the ledge rail without the light?

[@overlandedc]

Yes you can

[@scottmoore5839]

@@overlandedc Thanks...!

[@Ledyard24]

So with this setup are you running a threaded barrel

[@overlandedc]

Yes

[@weewee9464]

What holster again?

[@overlandedc]

Check the description. It's linked

[@shoot2thrill820]

Is that a 365 or XL sized barrel?

[@overlandedc]

365

[@actionjackson9201]

Amazon has very nice holsters for 365 and the XL.

[@private_ventures2592]

Personally, I'm going for a ported slide, Wilson grip

[@overlandedc]

lol that’s literally what I have now. I have the Spectre comp with a Wilson grip

[@williamclements2749]

365 XL - Mag-na-port barrel/slide, WC grip module, TLR-7, Holosun 507 K, Tac-Dev magazine bases - sending out later to Sig Armorer for Carry Action Job

[@ismaelzuniga9280]

What’s that pattern on that holster looks good

[@overlandedc]

It’s called recon fog

[@ismaelzuniga9280]

@@overlandedc can we order it so we have to email that info I don’t see it on the web site

[@overlandedc]

@@ismaelzuniga9280 ya you could dm him on Instagram

[@ismaelzuniga9280]

Thank you great vid great set up probably the best upgrade 365 I’ve seen so far

[@BlaccBoii]

that gold barrel makes it difficult to see chambered round ???

[@overlandedc]

No

[@googoo-gjoob]

you might consider using a lapel mic, as you are quite difficult to hear.

[@bhmsupra]

Looks like you’ve bolted all the shit possible to that piece!

[@dangerousfreedom4965]

Dude just run an XL

[@overlandedc]

I’m hoping this is sarcasm

[@yankeespanky6570]

Haha, true. Like at that point it's basically the same except the slightly shorter grip module. Too much stuff on it basically defeats the purpose of it's creation but it's still fun to add stuff so I understand.

[@overlandedc]

@@yankeespanky6570 actually it shoots flater than an XL will while being the same length so it has a purpose.

[@yankeespanky6570]

@@overlandedc I wasn’t talking about the compensator specifically. I was speaking about all the little parts. It defeats the purpose of what the gun is designed for but I acknowledged that it’s still fun to add things to a carry build. I imagine it isn’t THAT much flatter man. Difference is probably negligible. It’s smaller, snappier and so with the compensator I’m sure it’s only slightly flatter than the XL.

[@jsr-uz3oj]

Nice looking but the modifications could backfire on you a prosecuting Attorney will use that against you calling it a modified weapon and grill as to why you took it upon yourself to modify the gun were the modifications done by a gunsmith and why did you feel the need to modify the gun, I run stock on my CCW.

[@La-di]

Boomer logic

[@lowerspeedhigherdrag]

Firstly no, they won't. One because everyone knows about modifications on weapons making them work and function better. Secondly that's never actually happened. And thirdly if it did that's what your attorney is for. Same way if the prosecuting attorney tries to bring in some other stupid irrelevant stuff.

[@Mike193Inf]

SIG designs a great small cc gun and then everyone wipes out that design achievement by bolting all kinds of unneeded crap on it..

[@Barchenhund]

I never understood the flashlight attachment concept. Doesn’t it tell the bad guy exactly where you are?

[@Samyouell11510]

@@Barchenhund I’m fairly confident at this point it’s just one of those things people do for looks.

[@8654ZuluFoxtrot]

Anyone that needs a compensator and gas pedal on a 365 simply needs to get some good instruction on how to shoot.

[@overlandedc]

While I agree with you that everyone needs good instruction, no matter what training you have it's not going to change the fact that a smaller CCW gun like the 365 inherently has more recoil than a larger framed gun. Comps and gas pedals help to reduce muzzle rise and result in faster follow up shots.

[@8654ZuluFoxtrot]

@@overlandedc Yeah, I know exactly what they are for. A good solid grip will do the same. I guess if this is a range gun that you never intend on shooting at night, the comp is fine, and hey....it looks cool and that's the most important thing.

[@overlandedc]

@@8654ZuluFoxtrot it’s functional as well and the gas pedal helps with the good grip you mentioned.

[@8654ZuluFoxtrot]

@@overlandedc Hmmm, I guess I've been doing it wrong all these years then. I personally haven't found a 9mm small enough to need something like that, but I guess that's just me. Maybe a .45 micro the size of the P365 might need one...nah, what am I saying? A good grip is simply that, a solid grip, no little side attachments needed if you use good form. But hey, if you need it then use it, it's what it was designed for. People are always trying to find a way to cheat hard work and building good fundamentals.

[@Asherons]

Anyone with duel side airbags just needs some good instruction on how to drive.

[@80sbaby___baby70]

Get rid of everything on that gun besides barrel and comp

[@philsalvage]

Looks Ridiculous… buys a sub compact just to make it full size. Guess you hand money burning a hole in your pocket.

[@overlandedc]

It's hardly full size, still smaller than a 365xl.