The Ultimate Stock Tank Pool - Deck Build

Watch our original Stock Tank Pool DIY to get you started! • The Ultimate Stock Tan... The best improvement you can make to your stock tank pool is a lounge deck! Here's the long overdue video for our Stock Tank Pool DECK BUILD that we completed end of last summer! Note, this isnt a DIY since there are enough videos on how to build a deck, but more to give you ideas of what's possible with your stock tank pool! Special thanks to my brother for the help on this build!
Seen in the Video:
Bleacher Seats: amzn.to/2Hkluov
Hydra Bluetooth Speaker amzn.to/2z7E3dz
Ridgid Impact Driver amzn.to/2VGVVlx
Ridgid Circular Saw amzn.to/2H52rPS
Ridgid Fan amzn.to/2H6Bco7
Ridgid Tool Case amzn.to/2CjUUJ9
Camo Marksman Pro Tool: amzn.to/2TnogAA
Tarp we had custom made is a 9' Round tarp ordered from Tarp Supply, 55% mesh, full finished with grommets every 18" apart www.tarpsupply.com
Also ended up purchasing an outdoor deck box for pool supplies and chemicals: amzn.to/2Tl1mdp
Gear used to make our KZbin videos! kit.co/Lucent/youtube-kit

[@bonnierobbins4230]

Thank you for the great grandchildren pool! We're in Ohio...checked at Tractor Supply found one in stock 20×2' for 430.00 dollars. Best Wishes New Loyal Watchers!

[@LucentProductions]

Awesome!!

[@cms7129]

Love this, great job!!

[@alohaerickson]

Well done. Good to have relatives with skills. And don’t sell yourself short. You done good.

[@LucentProductions]

Thank you!! :)

[@markgeletzke6328]

Thank you for sharing your pool with us.. That is a great pool.. And the deck really works..

[@LucentProductions]

Thanks for watching!

[@Giondenver]

ok I see your finished video and looks great... I am sure you guys will get a lot of use out of it.

[@eroc1684]

Perfect for your growing family.... nicely done!

[@LucentProductions]

Thanks!!

[@bonzibonnie]

Wow....you all did a wonderful job!!!!! Looks great!

[@LucentProductions]

Thank you for watching!

[@DonTHEhandsome1]

Awesome. When we set up our above ground pool I built a mini deck also. Always fun to do man things.

[@LucentProductions]

Always fun!

[@rickydyess8869]

I love it. Gonna build one for my grandkids..

[@LucentProductions]

Good luck!!

[@pamularcarter418]

New subscriber, I love it. I've been looking for something like this.

[@LucentProductions]

Thanks for subscribing! 🙌🏻

[@coherantbliss3483]

You did great and love your idea. Makes me want to do it too! I live in the PNW so will have to do some research on keeping the tank from rusting...I see them around here and they all rust. Great job!

[@LucentProductions]

Thank you!! I’ve been lucky with no rust so far in our pool!

[@cherigreen4471]

This turned really great! I love the deck and the planters are a nice touch. Your kids are super cute!

[@LucentProductions]

Thank you!! Gotta give my wife credit for the planters and the cute kids! :P

[@katherinemartinez2217]

Looks good Thanks for the idea of how to build it

[@LucentProductions]

No problem, glad you enjoyed it!

[@regularguyfixes3142]

Very clean man. Love it. Now I just gotta modify this for my 18' pool...

[@LucentProductions]

Thank you!!

[@carlosnava8485]

nicely done. I am inspired. Thanks for sharing

[@LucentProductions]

Thanks for watching!

[@tmichaelryan]

Pretty awesome!

[@ChannelFiend]

What an awesome Uncle!!!!!! Love the deck & poolsetup!

[@LucentProductions]

Awesome for sure, thanks for watching!

[@garygerard4290]

turned out Real nice!

[@LucentProductions]

Thank you!!

[@eaglescout9901]

Very "Cool" idea, at 95 here in Cleveland, that looks awesome! I am a wedding photographer, since 77.

[@LucentProductions]

It has definitely been getting a lot of use the past few months from the kids and us parents! :)

[@carolewarner101]

Awww, what a lovely play area for your family to enjoy the summer. Looks amazing!

[@LucentProductions]

Thank you, kids def got a LOT of use out of it last year during the height of the pandemic...hoping it still seems the same use this year!

[@carolewarner101]

@@LucentProductions Oh my gosh, it must have been a total lifesaver. The deck will make it SO much nicer for all of you to enjoy! Your boys are beautiful.

[@jerseywomeninc.8640]

What pool ?????? Can We talk About how Amazing Theo's Smile Is ???? Your Boys are Adorable... The Pool is Pretty Cool too :-)

[@LucentProductions]

Thank you! :)

[@albertflores5356]

Looks great!

[@LucentProductions]

Thank you for watching!

[@malynnabdgirl]

Cute idea!

[@oddsandwindsocks5905]

Nicely done

[@fsalda1942]

Super nice man.

[@LucentProductions]

Thanks!!

[@jello022170]

Wow what a great looking job. Take care from Montréal,Québec 😀

[@LucentProductions]

Thank you!! :)

[@vcr210]

Well done!!!

[@LucentProductions]

Thanks!!

[@ProjectsWithPaul]

Nice video! Thanks for sharing!

[@LucentProductions]

Thanks for watching!

[@rebekkad.2092]

OMG I would have loved that as a kid!

[@LucentProductions]

Most definitely!!

[@jannyphillips1387]

Awesome! Thanks! 🙃

[@LucentProductions]

👍🏻👍🏻

[@jeepsanddragons]

Wish i can hire a guy to build me one in few years when i get my own place again...right now my mom and my son come first . I love these

[@asusreviews]

Good job!

[@LucentProductions]

Thanks!! 👍🏻

[@jacksonfl]

Nice job. Good for you.

[@LucentProductions]

Thank you!!! 🙌🏻

[@marianfrances4959]

Love it! We live in Canada so I'd want mine heated. Thinking: wood fire heat.😉🇨🇦

[@LucentProductions]

Totally!!

[@kaiguy]

Damn this is really inspiring! looks classy even my wife is into it.

[@LucentProductions]

Thanks!! Def worth the time and effort!

[@damienkashton9552]

i guess Im asking randomly but does any of you know of a trick to log back into an Instagram account..? I somehow lost the login password. I would appreciate any tricks you can offer me

[@alaricmarvin6332]

@Damien Kashton Instablaster ;)

[@nicksmooth75]

Hey man awesome video's and very well done!

[@LucentProductions]

Thanks!! :)

[@nicksmooth75]

I was just about to ask for a materials list for the deck but I see you posted it already. After seeing this video I want to do the same. So your pool might have a twin to it in Greenfield Ma.

[@LucentProductions]

nicksmooth75 aaaaw yeah!

[@ronniestanley75]

This would've been a good project to use that Trex stuff. I know it's much more expensive but, this is small. It would keep the water damage to a minimum and you wouldn't have to stain or treat it. Also, adding a small diaphragm pump and a cheap tankless water heater could make a great hottub in the winter months.

[@LucentProductions]

Thought about it actually, ultimately preferred the look of wood and don't mind the upkeep for the small deck size!

[@jwiheath1928]

Very nice

[@charlesbryant3515]

Nice BRO!!!

[@raymondseye]

Amazing

[@threenails3030]

I love this deck, i wish it was a step by step instructions

[@sharoncourt75]

I just finish my decking, my yard us very unevenen, I had to call a friend with a laser level and go all the way aroung cuting and rearangin the legs, my deck is not as prety as yours , i use composite for the top and i was not able to cut the circle is nest, never do it with a full tank lol but i am happy, great job.

[@michellemurray9688]

Gotta have a place for your dranks😉 Great Job!

[@LucentProductions]

Always needed! :P

[@hummerklein2567]

Fabulous

[@LucentProductions]

Thank you!

[@beachpinko1]

Afternoon Good Dad Lucent! I copy catted your pool build last summer. I did put “that “ valve down one ring. The sun here in beachside Florida is killing the rubber seals and plastics of the pool pump and hoses. I did break down the pool over our winter with a good wash and automotive car wax, replaced some hoses for this season. This season I’m going for a pool deck myself. The2 and a 1/2 year old likes to step on the pump and fitting to fall over the side. Maybe a little bigger on my part. Love your videos. Great work. Jason

[@LucentProductions]

Awesome!! Sucks to hear the Florida sun wasn’t so kind, we were lucky to have most of the equipment in the shade before this build. But if you add a deck it will def help protect it! 👍🏻

[@zeegee2483]

What a bang up job. You definitely owe your brother a big ole steak on the grill. 😜great job.

[@LucentProductions]

Thank you!! I am definitely in my brother’s debt for this one!

[@josielancaster7095]

Awesome

[@LucentProductions]

Thanks for watching!

[@GreenFamily2007]

That is one "decked out" kiddie pool! ;)

[@LucentProductions]

😝

[@teter129]

Awesome job. Do you plan of staining the wood? I wonder what the pool water might to that wood over time?

[@QueenByNature504]

Wow. Niceeee

[@LucentProductions]

Thanks!!

[@jennycass2070]

I am totally inspired. I am absolutely blown away at the quality and craftsmanship. Did you happen to post a materials list for the deck build?

[@LucentProductions]

Ah yes I posted it in comments somewhere in here, let me see if I can find it!

[@pj3998]

Cool, daddy, cool!

[@kevinkev1530]

Cool

[@JJE2010MO]

Can you make a quick video showing the tarp in use, curious to see how it's attached to the outside of the tank part. Thanks!

[@LucentProductions]

Trying to squeeze in an update video that will fully show how it attaches, but using ground anchors in front of the tank, and then hooks/tie down straps around the deck!

[@lendishaoops3168]

Wow... Really looks nice... Hats off.... Do u plan to add something to heat up the water like a hot tub?

[@LucentProductions]

No plans as of yet, might take a lot to keep it warm once fall hits New England!

[@drayid5839]

Man this is really amazing i love the video,Btw i expected to see about atleast 100k subs 50k views but it was 500 subs 250 views. so ive subbed and liked gl

[@LucentProductions]

Thanks for watching and big thanks for subscribing!! We're slowing starting to create more KZbin content outside of our commercial work for clients. Glad you enjoyed it! *fist bump*

[@dominiquehouleemc1044]

Looks great! May I ask what was the total cost for the pool, filter system and deck? I'm thinking about having one.

[@marcelosanjines360]

man awesome job. perfect size and set up. Do you all have the measurements up anywhere?

[@LucentProductions]

Thank you!! I don’t have framing details but it extends two feet off the sides and back. If it were to do it again, I would have gone about 3 feet off the back just so there’s a BIT more room to walk around without risk of young kids falling in. But now that the kids are older/taller and can swim great I have slightly less concern! (And there’s a secure cover on anyways when not in use!)

[@426superbee4]

Can make some nice thing from them Cheap. I love my 100 gal Rubbermaid

[@christopherblack1165]

It’s pretty great but that sure is a lot of work for something the kids will grow out of!

[@LucentProductions]

I mean, I'm an adult and I still use it 4-5 times a week during the summer. Perfect spot for a beer and a soak/float!

[@christopherblack1165]

Lucent Productions don’t get me wrong it’s a cool project. I was just thinking how my kids grow out of stuff.

[@christiancordero4060]

Wow wow badass , What's the size on that stock tank and how many gallons does it hold ?

[@tjl8884]

Good job. Only thing i would have done different was the height of the deck would have been flush with the top rounded part of the tank so the kids don't chew up their legs on the sharp wood edge. And when the kids get too big for it, it can serve as a bird bath lol

[@LucentProductions]

I made sure to really sand down the edges after filming to make sure it was nice and smooth! Kids slide in and out all time with no issues 👍🏻

[@kristinc8285]

Your video is awesome! Fantastic quality. (And when I heard you say weddings, and MA, I immediately wondered if we ever worked together!) I have been wanting to do a stock tank pool with stock tank planters around it for so long. I think this might be the year! I have a few questions for you, if you have the time to answer. If not, no worries. :-) 1. Wondering how you attached the cover so it stays on. Does the tank have the same rim on the bottom to attach bunch hooks onto? 2. Deck footing piers: Since you live in the same climate as I do, I am wondering how the deck piers have held up, or will hold up, with them being above the freeze line. 3. How did you get the tank home? A U-haul van or truck?? This has been my biggest deterrent for too long. ;-) Thank you!

[@LucentProductions]

Awesome!! (Our wedding company is Lucent Wedding Films!) 1. I actually used tie down straps for the cover. Some attach to the deck itself, and others go to ground anchors around the front of the pool. 2. Haven’t seen any isssues with frost and the footings yet, thankfully. 3. Getting it home was a big challenge. Borrowed a small pickup truck but it still overhung the side a bit. If you watch our original pool build video there’s a quick picture in the video of what it looked like. Def nerve racking driving back roads with that in there!

[@kristinc8285]

Lucent Productions thanks for the reply! I was KristinStudio Photography out of PVD. (Site still up, but after 18 yrs last year was my last year of my business). Ahhhh, ground stakes! Ok that makes sense. :) I’ll bet the drive home was a nail bitter!! Hope the deck looks great for many, many years! :) Enjoy! Summer will be here soooon.

[@kylepeavy]

I had the same question about how to keep the tarp down... I would love to see a picture of that in case need to plan anything into the deck build. I had a long drive to get the tank home - so for $35 I rented a 6' x 12' uhaul trailer and felt totally comfortable on the highway. It stuck out one side maybe 6" beyond the wheel.

[@dsweet471]

Great video! How are you fastening the tarp to the pool/deck etc?

[@LucentProductions]

Using tie down straps that go to the deck and ground anchors! Once it warms up here we’ll be filming an update video with more info on the cover 👍🏻

[@ashill34]

Hey, I asked you a few questions a while ago and FINALLY brought home a stock tank. Trying to figure out a child safe cover for it now and wondering how you "fasten" down your tarp via the grommets. Thanks

[@LucentProductions]

Hi! Sorry for the late reply, I have ground anchors in the front of the pool, and then anchors on the deck and use a bunch of tie down straps!

[@billyallmon5039]

Go lite on the Florence ,it will eat the galvanization off the pool and you will have rust

[@426superbee4]

He hee my tarp for my Rubbermaid is? 55 gal trash can bag, with duct tape around the top sides. And cloth pens clamp around the top. Hey it works and Looks nice. I put over one end with some cloths pens and Stretch out, to the other end with cloths pens Makes a nice tight fit. The duct tape around the top make it go under the lip. Hold excellent

[@michaelpugliese2715]

Tank can also be utilized as a giant deep dish pizza pan

[@LucentProductions]

I can get on board with that idea! SUPER deep dish!

[@michaelpugliese2715]

@@LucentProductions Now I'm really hungry. Toss on some anchovies

[@BryanFletcher]

Thanks for these videos. Would you recommend painting inside of the pool (or liner) for chemical resistance from chlorine tabs?

[@LucentProductions]

So we actually JUST coated the inside of our stock tank with Pond Shield because we got some rust this winter after 5 years. We’ll hopefully have an updated video soon with that whole process!

[@sherristrain6240]

Love it!! Any problems with rust yet? I’ve been told to treat the outside and bottom to prevent rust when the chemicals get splashed. I’m trying to do my research before getting one.

[@LucentProductions]

Three years and no rust yet! Trying to wrap up an update video answering some of the most asked questions we get (rust is one of them), so stay tuned!

[@jimpappas4244]

Do you have a list of the lumber you used, I want to buold this for my grandkidd

[@jb311incubus]

Hey brother! Love it! How much did you spend on the deck? Also how big is your stock tank?

[@LucentProductions]

It's an 8' diameter pool, and I THINK I spent about $600 on the deck build.

[@jb311incubus]

Lucent Productions outstanding! Thank you brother!

[@jonathannovella6918]

Building my stock tank pool deck this weekend with the help of your video! what are your dimensions on yours? how many 4x4's and 2x6's did you use?

[@LucentProductions]

Jonathan Novella there’s a comment reply below with some basic lumber supply numbers! It 10’ wide and 6’ on the sides. Although I’d prob go another 1-2’ deeper off the back if I did it again so there’s more room to walk by near the jets.

[@lydiamoore1418]

i'm probably missing it since I don't usually read a ton of comments on KZbin but could you repost the "basic lumber supply numbers"...I can't find them in the comment reply below. This deck is so awesome and my husband and I are hoping to tackle something similar with our new stock tank pool! Thanks for any help!

[@MrBNARick]

7:08 Max doesn't need steps LOL

[@LucentProductions]

Ha def doesn’t!

[@uniquesoundsforsleeprelaxa8538]

Were get pool? Great work

[@LucentProductions]

Tractor Supply!

[@drunkle4998]

So beautiful build but if the valve needed to be moved my not just rotate the pool while it was empty?

[@LucentProductions]

Initially I wanted to move the inlet valve in relation to the outlet valve, not moving both valves. But how the deck is laid out, having both valves at the back of the pool makes for the easiest access.

[@angelmission]

These stock ponds are pretty cool, but do they make them any deeper than 2ft? That is great for small kids, but bigger kids or adults need one a bit larger. I might like that size for a koi pond, but I'd probably have to put it in the ground or it would probably get too hot. Nice job!

[@LucentProductions]

Most are 2’ deep as their original intention isn’t for swimming.

[@lydiamoore1418]

i'm probably missing it since I don't usually read a ton of comments on KZbin but could you repost the "basic lumber supply numbers"...I can't find them in the comment reply below. This deck is so awesome and my husband and I are hoping to tackle something similar with our new stock tank pool! Thanks for any help!

[@LucentProductions]

There was a comment where I replied but now I don’t see it. Let me see if I still have my build supply notes!

[@daniellelouise7587]

How has it held up this many years later!?? We need an update!

[@LucentProductions]

Trying to film an update video this year!

[@aldwindetorres4085]

Have you noticed any instability using the concrete blocks? Did you somehow anchor the posts into the blocks?

[@LucentProductions]

They are just inserted into the concrete supports, and once you have everything tied together it is rock solid!

[@yhwhtlc9217]

deck looks nice ,, could you not turn the pool so the filter connectors are not where the decking is?

[@LucentProductions]

So I didn't want to move BOTH valves, just wanted to move the inlet valve lower and away from the outlet valve. But with the deck there now, the current location is the easiest for turning off the plunger valves.

[@megexe5837]

Just a quick question for you! How do you like your custom cover from Tarp Supply? I have a 6ft stock tank pool here in South Texas and I'm looking to get a nice cover made. I'd appreciate your thoughts! Would you order it the same way again? 55%mesh with the grommets?

[@LucentProductions]

The tarp has worked great!!

[@LucentProductions]

and yes, I would order same specs again!

[@apocalypticarhp]

Nice Work! What about rust on the stock tank? Did you put any chemicals to treat the galvanized steel? Tks!

[@LucentProductions]

Haven’t had any rust yet after over 3 years. But looking to add some sort of coating this spring before we open it up for the season.

[@apocalypticarhp]

@@LucentProductions Please, share with us!

[@jcaveroe]

Awesome job. What’s the diameter of your stock tank ???

[@LucentProductions]

Ours is an 8' tank!

[@DanK-Mtb]

looking to doing something similar, do you need to remove sod and pack down the ground to add the concrete footing blocks or plopping them right on the sod and mud would be fine ?

[@LucentProductions]

I would def dig up grass and compact dirt + add a bit of crushed stone so you have a solid base.

[@johnhottle8234]

What would it take to get detailed deck plans? I’m looking to copy this except with taller 4x4s to put a sail shade. Any issues around the stability of the deck blocks? I have limited woodworking experience... but I have access to some free lumber so why not try?

[@LucentProductions]

ah good question, I sadly don't have an exact blueprint anymore. I know that the deck extends 2' beyond each side of the pool (so 12' at its widest on the back).

[@plasmac9]

A+ for using timber screws instead of simple ceramic deck screws for the framing. Someone clearly knows what they're doing.

[@LucentProductions]

Thank you! My brother introduced them to me and all I use now for framing!

[@NikiRussell]

I built my own pool last summer and I’m putting together the deck this summer. I have been pricing out and looking at covers as well. Do you have pics of your pool covered with this tarp? How are you staking it down. My worry is things sticking or jutting out that the kids can get stuck on...

[@LucentProductions]

Niki Russell I posted a picture on our “Community” tab so you can see how it’s attached! Ground anchors near the front of the pool and then hooks on the deck. 👍🏻

[@NikiRussell]

THANK YOU!!

[@reneevasquez6255]

Where would you have put the plunger valves? Both on bottom of the stock tank? And why?

[@LucentProductions]

I would have put the return valve closer to the bottom instead of right near the top. Only because you need to fill the water above the valve which made it almost to the top of the tank.

[@alexzanderpullen1517]

I'm building a deck based on this video but am wondering what degree angles you cut for all of those diagonal braces ? I've been using trial and error so far but am running low on wood. lol

[@LucentProductions]

Ah good question, I have no clue on angles as my brother did all the cutting. And angles would change depending on size of the deck!

[@Rob_Steele]

great video and love the project, but small typo on your kit.co link... you put .com instead. just wanted to let you know :)

[@LucentProductions]

Good catch, updated...thanks!!

[@randallfrank5682]

I question the design of the concrete pier blocks holding the upright 4x4s. Is there drain holes through the 4x4 pocket? Even if there is a drain hole, water will eventually rot out the upright 4x4s sitting in those pockets. I would have used a different pier block design where water would not sit in that pocket with the 4x4s.

[@LucentProductions]

All the blocks have good size drain holes and I haven't seen any issues with water collecting.

[@OffTheLens]

about how many of those 2x6x12 did you buy for this ?

[@billmoore6688]

Just finished a deck like yours. My problem like you was the length of the hoses to get the pump/filter. Mine are Intex 1.5 inch 59 in length. Do you have any idea where longer hoses are available? Thanks

[@LucentProductions]

Hrmm not sure where to get longer hoses, sorry!

[@sherriek3476]

Ok I do have an important question where you live in Massachusetts so do I how are you going to winterize the stock tank ???? Im intrested in using one of these not sure what to do in the winter thou

[@LucentProductions]

So I live west of Boston and typically empty the tank each fall. One year I DID leave it filled and it did freeze a bit on top.

[@emorymurrah4584]

Hey have you done an update with your cover on?

[@LucentProductions]

Ran out of time to film an update video last year with Covid, but working on it soon and will have more info on the cover!

[@photonashville]

Could you have just spun the tank around to put the valves in better location? Tank wasn't locked to the grond and had no water in it.

[@LucentProductions]

Didn’t want to move both valves, just wanted to move one of them.

[@tessamccormick8240]

What type of wood did you use for the deck? And did you seal it with anything or is it doing well with just the wood?

[@LucentProductions]

Just reg pressure treated lumber! Sealed it last year and will prob give it a good power washing and reseal this summer.

[@tessamccormick8240]

Sorry I don’t know much about wood so my questions may be silly, but your deck is identical to what we are building! Does this splinter and does it feel good for the kids feet? Does it hold up well with water getting on it?

[@LucentProductions]

@@tessamccormick8240 After installation I sanded it down and treated it with deck sealer so it's been great on feet and has had no issues with water!

[@tessamccormick8240]

I have one more question! Did you custom tarp work well? I got the intex one and it sinks below the water if they makes sense? So when dirt and leaves land in the tarp and I try to take the tarp off it all falls back inside the pool!

[@AmberPisanoChefWillBeFamous]

Excited to get started on my whole process of one of these for my little kids, I'm just wondering, going on now threw years in, how are you doing with rust on the interior? did you plan for that at all or is that something you'll deal with when it comes? I've seen so many different videos, some seal and line it, some don't. What do you suggest?

[@LucentProductions]

So far we’ve been lucky with no rust, but plan on painting the inside this spring! Plan to film an update video this spring that will include the painting!

[@AmberPisanoChefWillBeFamous]

@@LucentProductions thanks for the reply. So what I've gathered after tons and tons of internet research is that you use it for a few years until you start to see some rust and once the galvanized coating wears off then you paint it and treat it as most rubber paints won't stick to the galvanized metal. you can sand and treat beforehand but why stress yourself out more? We're going to use your video to make our kids pool. Thanks again!

[@LucentProductions]

Amber Pisano awesome good luck!! 😃

[@AmberPisanoChefWillBeFamous]

@@LucentProductions Awesome! Can'r wait to see. We were thinking about coating the inside with Pool Paint once the galvanization starts to wear off. Can I ask what pool cover you're using now? Did the 8 Ft. Intex end up working out for you guys or did you switch over to something else? Thanks again!

[@LucentProductions]

@@AmberPisanoChefWillBeFamous The intext one didnt work as great, so we had a custom mesh cover made for the pool! Still lets rain get through to prevent pooling of water/sagging on the cover, but keeps out big debris.

[@MultiLisa10]

What about rust in that metal pool?