XTOOL COUPON! Save $80 on xTool products (U.S. store) with the promo code FDOH80! Redeem here: shrsl.com/48hap.
@Sustainmycrafthabit4 ай бұрын
I really needed this! Have been putting off using my RA2 Pro for months. Thank you for the excellent tutorial. -Jane
@FirstDayofHome4 ай бұрын
Thanks, Jane! I hope you have fun making some cute tumblers. It’s so satisfying.
@Sustainmycrafthabit4 ай бұрын
So many great tips Crissy! Thank you - the tumblers turned out amazing!
@FirstDayofHome4 ай бұрын
Thank you! I can’t wait to make some more designs.
@John-bw1cy9 күн бұрын
Can this do 40oz tumblers? And this was answered in the video please forgive me
@FirstDayofHome9 күн бұрын
Yes, you should be able to do a 40oz tumbler. My 40oz Stanley cup mouth is the same size as the aqua tumbler I engraved in this video (about 4"). For tumblers with handles, just make sure you can unscrew the handle. Good luck!
@kimberlyweeks2265Ай бұрын
This video helped me so much! Does the machine automatically adjust the image for the taper?
@FirstDayofHomeАй бұрын
I’m so glad to hear that! It doesn’t automatically adjust, but if you measure for around the middle, it should be fine. Here are some written instructions in case it’s helpful too: www.firstdayofhome.com/how-to-laser-engrave-tumblers/.
@ValYo06233 ай бұрын
Where did you get your wooden risers? Thank you for the video! Very detailed and easy to follow!
@FirstDayofHome3 ай бұрын
I'm glad the video was helpful! The wooden risers sometimes come with the M1 bundle, but you can also buy them separately here (affiliate link): shrsl.com/4lrmb. I received mine as part of the M1 Deluxe package: shrsl.com/4lrmg. I hope this helps!
@jimtonelli65842 ай бұрын
Is the adjustable support lifting the nase of the rotary tool off the table?
@FirstDayofHome2 ай бұрын
Yes, the adjustable support module sits on the same surface as the rotary tool. In my example, they both sit on the honeycomb panel (inside the riser base). If you're using wooden risers instead, you'll have the rotary and support module sitting on the base plate. I hope this answers your question.
@ashleighsoufas29532 ай бұрын
how can I make sure the wrap matches up perfectly???
@FirstDayofHome2 ай бұрын
The design I purchased was made for a 20 ounce tumbler, and then I just had to make sure it was sized to get as close to the silver rim (edge of the powder coating) as possible. I used framing to preview where the laser would engrave and made adjustments until I felt it was close enough to the edge of the powder coating. Framing is your friend to preview the laser path before you process the job. I hope this helps! Here’s an article with the steps as well: www.firstdayofhome.com/how-to-laser-engrave-tumblers/#settings-for-engraving-powdercoated-tumblers
@multidinero3 ай бұрын
The Rotary is also compatible to the XTool F1. Just an FYI.
@FirstDayofHome3 ай бұрын
Yeah, I didn't include the photo or mention it in the voiceover, but I put a footnote in the video that mentions it. (The closed captions might cover it up.) Thanks for highlighting this also!
@Michelle88-holaАй бұрын
I love your measuring tape...where id did you get it?
@FirstDayofHomeАй бұрын
The measuring tape comes with the xTool Rotary tool, which you can find here (affiliate link): shrsl.com/4892f. The tape has color coding to determine the level for the wooden risers or honeycomb panel and the roller gear (A, B, or C).
@Michelle88-holaАй бұрын
@@FirstDayofHomeoh ok…ya my new RA2 rotary accessory only came with a super cheap measuring tape. It’s not like yours. Thank you for replying ❤️
@FirstDayofHomeАй бұрын
@Michelle88-hola Oh! Maybe they changed it. Well, I hope yours does the job still. Happy to help any time.