THE VAN SCANNER DANNER COULDN'T FIX

[@SouthMainAuto]

Hey James, nice fish and an easy fix! Hey if you are doing those in the future and want to plug the hole in the hub use a valve stem cap and the when you are done cleaning reach right in the hole with a valve stem screw it in the cap and pull it out. they seem to fit in there perfect :) Take Care - Eric O.

[@jamesdanner7850]

+South Main Auto Repair that's a great idea. Thanks. You are in the rust belt too huh? I think I remember u changing a few that were a year or so old and rotted worse than mine. I think.....

[@SouthMainAuto]

Oh yeah I have done some nasty ones. Upstate NY so we get hammered with the salt too. It is what keeps us going :)

[@ScannerDanner]

hahahaha I haven't watched yet but I'm laughing at the title

[@jamesdanner7850]

+ScannerDanner I'm sure you won't learn anything

[@zackbrown9321]

The last line was the best. Lol

[@prmayner]

same here, as soon as i read the title i busted out laughing sittin here at the kitchen counter telling my wife about the video, she even got a kick out of it. can't wait to watch. thanks JD.

[@rhkips]

Haha, I envy you and your fish! For about ten years of fishing with my father when I was a kid, we caught two fish, a medium-sized rock, a presumably non-functional torpedo, and a commercial fishing boat. A couple of great, simple fixes! Normally when I see low-speed ABS activation issues here in California, it's a bad hub/bearing assembly; we really don't get rust-jacking issues here. I did get a Honda from Colorado to work on once, though. I sure lost money on that one!

[@jamesdanner7850]

+rhkips presumably non functional torpedo. Ha. I want to hear more about that

[@rhkips]

James Danner I have to assume it was a torpedo, simply because it was in the water. It was only about a foot long or so, maybe 4" across, and was quite heavy; had a little propeller and a shroud on the back and everything! Embarrassingly, I fought with bringing it up for close to an hour, so I was pretty disappointed when it wasn't a fish, and even more so when my father told me I couldn't keep it!

[@jamesdanner7850]

+rhkips nice. I think they made bombs with those little fan things on them too in wwII or something like that too. Where u from?

[@rhkips]

James Danner I'm down in Southern California, but all the fishing took place in Vancouver, Canada, usually bobbling around Howe Sound. :)

[@Mikeywil0003]

13:47 When you said you were talking to your fans, it made me think of that movie Tommy Boy where Chris Farley is talking into a fan. LOL

[@cardiaglexia995]

James thank for your video , thanks for your work on this car.thanks for all.you are a very very good man for me. all good for you !!!!!!!

[@johnnysprocketz]

I Enjoy all of your content and the videos youre in with your brother, professor paul. Happy New Year Boss!

[@toroon]

Too old for Scanners' students! They better learn to deal with old. Great video man. Make Danner buy the beer!!

[@SteveRobReviews]

Two in one , doesn't get any better, cheers buddy and a vid on your ride would be cool.

[@jamesdanner7850]

+STEVE ROB I need Rosedale to fix their dynamometer for my nova video idea

[@SteveRobReviews]

Peter V Well it was nice to be invited but ill be up in the bush working on a friends camp. Maybe next year and I bringing James Danner with me. LOL

[@rheidtech]

saw the perch, drew me in...happy fishin man!🐟🍻

[@mfsperring]

Packing the hole with grease is a great idea. Thanks for the tip.

[@eddiemartinez265]

Good work jimmy.

[@rheidtech]

good vid Jim have a great weekend.

[@toyotatechMDT]

Nice rust Danner! Make sure Paul watches, he can learn for the next one!!!😉

[@billrimmer5596]

Good afternoon Toyota Tech. You're in Jolly Old England right? Always enjoy you're input!

[@toyotatechMDT]

+Bill Rimmer yeah, Midlands. Where are you from?

[@billrimmer5596]

+Toyota Tech I live in Sylmar Calif. Where we had the earthquake in 1971.

[@toyotatechMDT]

+Bill Rimmer Oh I thought you for from the UK! Midlands may not make sense then, I live between Manchester and Birmingham (Not the Alabama one!) if you've heard of Wedgwood pottery, I live where they manufacture that. I've never been to CA, it's on my list!

[@ozzstars_cars]

Enjoyed the video. I think i'm ABS certified now. lol That is a sweet looking van if your blind. haha.

[@rrmech11]

Hi James nice to see a new video.

[@nocarebear8301]

Not just any fix but a cheap fix and not just throwing parts at it.

[@haywardsautomotive6156]

First you had to do the suspension on his truck and now you're fixing what he couldn't.:-) Nice ABS videos 2 at a time.

[@eddiemartinez265]

PAUL can't get his hand's dirty after all he is a master ha ha ha .

[@titogaray5224]

Danner can you explain why a 96 dodge 1500 shifts proper when cold and soon as transmission gets hot then won't shift

[@jamesdanner7850]

+tito garay sometimes just the filter gets plugged. If u shut it off for a minute ore so, will it shift again? Or does it have to be cold again

[@titogaray5224]

transmission has to cool back down to properly shift smoothly again. Oh, thank you for opening a whole new world for me with your expierence on you tube.

[@Carlitosway211]

There's really too many possible answers to that question to be accurate without actually physically touching the vehicle.

[@makethemfly7660]

Where is your go to fishing hole for the evening fishing with the kids? Canonsburg Lake or Dutch Fork Lake?

[@jamesdanner7850]

+MakeThemFly that fish was laurel hill state park. Been to Canonsburg for trout. But mostly the youghiogheny river

[@jmtaylor556]

Awesome video Danner. Thank you

[@filibertobarrera3839]

Know this is an old video.But love the title gave me a giggle.And I thought giggles are for girls.But this title sure made me giggle.

[@jamesdanner7850]

Funny. Glad I put u in touch with your feminine side , I think

[@mikepratali5582]

what is with the pops and clicks in the audio?

[@jamesdanner7850]

+Mike Pratali I didn't hear anything when I edited it. Did it do it the whole video for you?

[@mikepratali5582]

yes, up to 26min didn't search past that.. I'm using headphones and not table speakers.. Try with a listen using headphones or earplugs.. more pops at the beginning of the video than the end.

[@leebarnes655]

Yeah, I got them too, chirps, beeps, squawks, tones, each starting with pops and clicks, always very short duration but only somewhat distracting due to very low volume. Quite a variety too, no two the same it seems. Can't imagine what it is though. Mostly at the very start. Every second or so in the worst places. I'm using a stereo system setup not computer speakers. I'd be worried about leaving my fishing pole like that around channel cats, you get a big one that wants your bait and you are buying another fishing pole unless you got a death grip on it or a safety cable system. Nice one James, old school rules. We all know he coulda, he just didn't wanna.

[@jamesdanner7850]

+Lee Barnes yep. And I have lost a pole or three. But we don't mind getting wet either. Sorry about the popping, I have no idea. Either during rendering or the upload. It was clean when editing. Hope it was a fluke

[@LynxStarAuto]

It was R2D2 giving play-by-play.

[@deepsquat600]

I cant watch yet///but wow ..throwing your Bro under the bus ...good job :)

[@wtbm123]

Good job , fixing the van , Even done it with a scanner and a scope . lol

[@wysetech2000]

Nice repair, Jim. Most people would have replaced the hub.

[@obsoleteprofessor2034]

I've worked all my life in Arizona and Central Valley California with 2% humidity and 2" of yearly rain.. I have never seen such rust ever!

[@trainer2018]

lol. I'm waiting for Paul's response vid,lol.

[@jamesdanner7850]

+busjockey1 yea!. I feel like I'm winning the sarcasm battle. Maybe all those years in the classroom made him too serious. :p

[@wyrtwister4260]

Looks like you were trying to hook up a scanner to the diagnostic port on the 95 model ? Can you explain how to do that . I have a simple OBD II scanner that I would like to use on a 1991 Caprice . Thanks , :-) Wyr God bless

[@jamesdanner7850]

+Wyr Twister different scan software. And a different end. . Gm ,Chrysler, ford. . They all had different plugs pre obd2 U looking for a code or wanna see data?

[@wyrtwister4260]

Think it is running rich , but maybe not enough to set a code . Thanks , :-) Wyr God bless

[@jamesdanner7850]

Check the resistance of the coolant temperature sensor

[@Pablo_Automotive]

Nice video James =P

[@billrimmer5596]

Really good! Was that Nicks car u did the burnout in? So the engine that was on the run stand is in the car? The wheel sensor is sending a linear voltage that increases with speed. Not a square wave, right? Man whenever we can get SD we do it. His super dooper Bluetooth Verus with the cracked screen was no match for old school big brother and the Stone Age Vantage Pro. Made my day. He might even talk about this on Premium!!

[@jamesdanner7850]

+Bill Rimmer no. The ugly 72 that's many colors is mine. The car that put me thru school. Nicks is a green 74 he built that engine for. It runs better than mine now

[@deepsquat600]

come on Nick!! I am talking to my fans!!

[@GRowe1978]

I don't know why but the shot of the side of the van outside made me laugh uncontrollably! What is that? Minecraft camo?

[@jamesdanner7850]

+GRowe1978 yea. The silence said it all

[@GRowe1978]

James Danner It really did. That was a brilliant shot!

[@romanviking1007]

Do u ever watch big bigger biggest. Pensilvainya a sub and pairs n nicky are air machence for it. Shows are pritty good.

[@InsideOfMyOwnMind]

What about using a depth gauge so you know that things like thermal expansion will not cause the sensor and ring to sodomize each other?

[@jamesdanner7850]

+InsideOfMyOwnMind ha. You could but my experience is if it's hitting, you feel it

[@billyr9840]

Great vid James but dude, that van some ugly sh*t ! You should have some t-shirts made up featuring that van and the title you gave the vid ( The Van ScannerDanner Couldn't Fix ! Bet you would make a small fortune ! LOL !

[@swav100]

what happened to clark?

[@jamesdanner7850]

+swav100 I try not to film around him if I can. Ha

[@swav100]

+James Danner ha ha i thought he was traveling the world since he got famouse.

[@jamesdanner7850]

+swav100 well, there is construction on his normal route home. That could be the next Pixar movie Finding Clark

[@swav100]

+James Danner finding clark but dont get to close.

[@jamesdanner7850]

+swav100 how about Losing Clark

[@351cleavland]

NO, NO, NO! The title should read, "The Van Scanner Danner couldn't make Ran!"

[@mikesaldana3760]

Do u know big him at sears and Justin. Never an sears rolling oaks milk

[@eddiemartinez265]

Not a hemi but 440 is a good motor.

[@lawrencehogan7204]

Man, that is one ugly a$$ van! lol And trust me, I have owned some ugly vehicles. oh well, to each his own. Nice Nova by ghe way

[@justamessenger5985]

Take this quick test to see if you will make it to Heaven: Have you ever told a lie? Ever stolen anything, used God’s name is vain, or lusted? (The Bible says lust is committing adultery in your heart.) If you answered “yes” to these questions, God sees you as a lying, thieving, blasphemous, adulterer at heart, and His punishment is eternity in a terrible place called Hell. Yet God, in His great mercy, sent His Son Jesus as a Savior for guilty sinners: “God commended His love toward us, in that while we were yet sinners, Christ died for us.” Jesus Christ then rose from the dead and defeated death. Please, don’t gamble with your eternal salvation. Your soul is far too valuable! Repent today and put your trust in Jesus alone. Make Psalm 51 your prayer, then read the Bible daily and obey it. God will never let you down.

[@efanclublolsmaforlife2501]

... lol

[@nebursalcido1867]

Boring