Get the CNC project setup checklist here → link.idcwoodcraft.com/g3rwll
@BK-md9mtАй бұрын
Garrett, Thank you very much for these videos. They are very helpful.
@IDCWoodcraftАй бұрын
BK-md9mt, You're very welcome! I'm glad you found them helpful!
@richardwilliams55205 ай бұрын
Very nice tutorial Mr. Homme. I noticed that the "keep out zones" are only a 2D configuration. At some point Vectric might include the 3rd dimension for "keep out zones." Some CAM programs can jump over the obstacles if the machine is capable of doing that. Subject to what distance your Z axis can retract up to of course. Nice presentation you did. Thanks.
@IDCWoodcraft5 ай бұрын
richardwilliams5520, Thank you for your kind words! Yes, you're right that some CAM programs can jump over obstacles if the machine allows it. Adding a 3D configuration for "keep out zones" could definitely be a useful feature in the future. Glad you enjoyed the presentation!
@drkline695 ай бұрын
Thanks for the update Garrett.
@IDCWoodcraft5 ай бұрын
drkline69, you are so welcome my friend.
@brianwade84815 ай бұрын
Absolutely love this new feature! Thanks for the video.
@IDCWoodcraft5 ай бұрын
brianwade8481, you are so welcome my friend.
@stevecox5525 ай бұрын
That is flipping awesome,,,, great information Garrett,,,, keep it up,,, Dang nab it man!!!!!
@IDCWoodcraft5 ай бұрын
stevecox552, right on brother! Ill keep at it.
@thomasgrim15495 ай бұрын
I think that rectangle around the non-rectangular keep out zone is a bounding box. The concept of the bounding box is important in a number of areas, so if this is a bounding box, It would be good to introduce the term.
@IDCWoodcraft5 ай бұрын
thomasgrim1549, good call brother! Ill be sure to use that terminology from now on.
@Rhoude76953 ай бұрын
At least in Aspire 12, You can still use both the new project rotate feature and the old project rotate method by going to Edit-Program Options-View Controls mode and select "legacy" instead of modern. Then you can use both.
@IDCWoodcraft3 ай бұрын
Rhoude7695, That's a great tip! Thanks for sharing your knowledge with the community.
@nancej1005 ай бұрын
Thank you for sharing. Enjoying your videos.
@IDCWoodcraft5 ай бұрын
nancej100, you are so welcome my friend.
@RAcreativewoodworks5 ай бұрын
Thank you for the information Garrett 🎉🎉🎉🎉
@IDCWoodcraft5 ай бұрын
RAcreativewoodworks, you are so welcome my friend.
@vickypadam9295 ай бұрын
very nice episod Garrett, THX.
@IDCWoodcraft5 ай бұрын
vickypadam929, you are so welcome my friend.
@TheSuperheimwerker5 ай бұрын
cheers Garrett 👍
@IDCWoodcraft5 ай бұрын
TheSuperheimwerker, happy to hear you liked this one my friend.
@chriskennedy25245 ай бұрын
Great tips
@IDCWoodcraft5 ай бұрын
chriskennedy2524, glad to hear it brother! happy CNCing.
@casenundra782 ай бұрын
I already have the bit set ! Why do I have to go through all the BS to get the check list ??
@IDCWoodcraft2 ай бұрын
You don't. You should already have it from email
@KimberlyWendt-lc2iv5 ай бұрын
what is the replacement for control z to undo previous action now that I've upgraded to v12?
@IDCWoodcraft5 ай бұрын
Control z still functions as normal. No replacement
@edluna522411 күн бұрын
Garret, I cannot find an app that can open the tool database file. It is zipped (or compressed) and none of the standard zip file apps will open it.
@IDCWoodcraft11 күн бұрын
edluna5224, here is a video that should really help you brother: kzbin.info/www/bejne/ZmfUnaGZq992mLssi=eSDglQb20Uy0d0xO
@vickypadam9295 ай бұрын
How much does it cost to buy new vectric 12, i am new in this field.i bought ,i bought international i carve macchine.
@IDCWoodcraft5 ай бұрын
vickypadam929, you can buy it directly from Vectric. Here is a link: www.vectric.com/products/vcarve/
@mwinn20095 ай бұрын
What would be really cool would be to have a camera like lightburn, then making a keep out zone would really pay off
@IDCWoodcraft5 ай бұрын
mwinn2009, that would be very cool brother! I like that idea.
@raystormont5 ай бұрын
I am a private user and need help configuring my machine and options where can I go for non bias advice? Ray Stormont
@IDCWoodcraft5 ай бұрын
user-vn6hi2bi3g, I recommend making a post on the CNC Entrepreneurs Facebook page here →facebook.com/groups/cncentrepreneurs. There's a ton of really helpful CNC brothers and sisters on there that will probably have some great tips for you!
@raystormont5 ай бұрын
@@IDCWoodcraft THANKS! Ray
@butchmcgraw31385 ай бұрын
-You can hold right mouse button and rotate the model
@IDCWoodcraft5 ай бұрын
butchmcgraw3138, good call brother. I like that idea.