A Quick review on the Vermeer BC600XL! This thing Demolished all of the limbs I put through it. Thanks for watching! For general or business inquiries E-mail: Mtheakston23@Gmail.com Hit Subscribe!
Пікірлер: 62
@diastoleny3 жыл бұрын
Great video. You've made it clear that I need to rent the 12". Roughly $250 rental for 6" and $400 for 12" by me. Thanks
@Samlol23_drrich4 жыл бұрын
I’m a homeowner and had the bright idea of buying one of these to take care of my wooded 2 acre home. I bought in used then sold it for more than I paid for it. It had the same Koehler 27 but worked way better than what you showed here. Not sure why. It would eat a 6 inch log without stopping at all. No idea why. Nowhere to put it, so I had to sell it. Also lot of work dragging the wood to the chipper.
@MichaelTheakston4 жыл бұрын
The knives on this unit I found out were super dull 😑
@Samlol23_drrich4 жыл бұрын
I actually bought mine from a Vermeer dealer- it came in off a trade, and they serviced it before they delivered it, so I'm sure the blades on mine had been sharpened. Thats definitely the answer. Thanks for the reply.
@penguinistas3 жыл бұрын
@@MichaelTheakston That's what I thought... that the chipper knives were really dull.
@marcshields3677 Жыл бұрын
@@Samlol23_drrich how much did you pay for it and what dealer did you use? I need one and I live in Texas.
@stuntstrat76 Жыл бұрын
Thanks for the video! I appreciate your concise direction and proper understanding of the equipment. 👍
@penguinistas3 жыл бұрын
It would be good for everyone to know that the chipper knives on that unit were really dull. I have a Vermeer BC625 chipper and it chips much faster than that.
@treemands6 жыл бұрын
My Vermeer chipper has a 200 horsepower Cummins turbo diesel. But those chippers are fine for what they are meant for.
@577buttfan4 жыл бұрын
Great little starter chipper especially for a solo operation.
@josephmorgan41083 жыл бұрын
Youd be better off with a whisper chipper until you are ready for bc1000. Talking from experience
@absolutetreemaintenance25355 жыл бұрын
I've used a BC900 before and for a 9" machine it's awesome
@DrChim_Richels4 жыл бұрын
Rented this chipper w/ the 27 hp motor for the day($180 in Colorado Springs) to chip about 40-50 ponderosa tops and a bunch of slash. Mostly about 4-5” dia with a few pieces closer to 6”. Overall no problems...this thing worked great. You do have to limb the pieces a good bit, especially if it’s dry and stiff. If the limbs were still green, they would bend nicely and go right through.
@007more75 жыл бұрын
Oh my I was about to buy one, thank God for this video.no thanks what a waste of steel...
@whistledawg72067 жыл бұрын
Pretty sure the knives were dull on this one- I owned a Vermeer 6" and when it started cutting this slow it was time for knives.
@HAUSS815 жыл бұрын
Whistle Dawg That chipper is painfully slow.
@briankirwan95886 жыл бұрын
We have one for our small chipper for our tree service and they are great units but that one seems like the belt is loose or over tight and dull blades thats why the auto feed kept coming on
@MichaelTheakston6 жыл бұрын
Brian Kirwan Blades were definitely dull, we rented one last week and it mowed through it no problem.
@brockjones13645 жыл бұрын
If you get one I suggest using a proper sharpening service that uses CNC machines with coolant. The blades I have sharpened are mirror smooth and razor sharp. They will stay sharper longer due to edge integrity. Do not neglect sharpening the bed knife and setting the gap just right for the machine, it is crucial.
@jenniferjoyvold67144 жыл бұрын
Helpful, thanks for posting!
@treemands6 жыл бұрын
Wowww!!....Dude...a little dinky chipper....wonders never cease!
@MichaelTheakston6 жыл бұрын
Dave Shaw Yeah, I'm glad I don't own that one
@jrac8633 жыл бұрын
Our brush bandit 6 inch chipper makes this thing look like a turtle slow as hell
@paanimunatu82243 жыл бұрын
Please how can i order the belts for this vermeer bc600xl brush chipper
@hughjass70252 жыл бұрын
Is the feed rate adjustable? It seemed like it was feeding quickly, bogging down, stopping the feed, then repeating that patter over and over. It seemed like it little lower feed rate would have been better.
@MichaelTheakston2 жыл бұрын
Yes you can adjust the feed rate
@BorderPaps5 жыл бұрын
Thought I saw a good deal on one. After watching this, no way.
@kevinbell825 Жыл бұрын
Slow. Thanks for the honest review.
@joshua79992 жыл бұрын
Anyone know how much that thing weighs? Just wondering if my jk wrangler can handle it if I rent one.
@MichaelTheakston2 жыл бұрын
It will handle it
@ronaldharmer6071 Жыл бұрын
Mine bogs down any thoughts on why ?
@MichaelTheakston Жыл бұрын
Adjust the in feed rpm stop
@gabemalcolm44297 жыл бұрын
That thing kicked butt .So are you planned on buying one at some point? .
@MichaelTheakston7 жыл бұрын
I do plan on buying one, but don't have enough tree work to justify buying one right now.
@josephmorgan41083 жыл бұрын
@@MichaelTheakston when you do buy, spend 5 grand on a whiper chipper until you are ready for a bc 1000. Dont finance!
@pokerchannel69914 жыл бұрын
Hi: In my estimation, it would cost $200 to rent. that is a lot of $$
@diastoleny3 жыл бұрын
Those chippers cost $10,000 plus. No so expensive to rent.
@pokerchannel69913 жыл бұрын
@@diastoleny so, do you just accumulate a bunch of shit and then do it all at once? I think you may have mentioned that in the vid, so ok. $200. Damn. just by typing $200, it gave me pause again. Damn, that is a lot of $$$. LOL. damn. I can't win! I think it is impossible to win at this thing we call life. Damn. In the end, we all lose the game on staying alvie, since we all die. Damn! this sucks!!! Damn. (I didn't even expect that this discussion would have turned so philosophical . . . but since life fvks us so hard at every turn, even a simple discussion on wood reminds us of this unpleasantness. Life literally svcks a$$.) damn.
@diastoleny3 жыл бұрын
Make a fire pit in your backyard and sit by a beautiful fire every evening. Its free!!!!
@pokerchannel69913 жыл бұрын
sounds good to me . . . at what point, though, do you load the revolver while sitting there by the fire? Seems like an appropriate time to end it all, if life is truly that suxors. damn.
@brockjones13645 жыл бұрын
Lol! every time I think about buying a small chipper like this I just get on KZbin to remind myself why not to. Get a bigger one if ya do decide to buy.
@brockjones13645 жыл бұрын
I do not want any thing that cannot keep up with me. It is really nice when you can throw one big branch onto another and keep piggy backing them in or put a big arm load of brush on top of a branch as it is going in. You will find it much easier to justify the expense with the higher productivity.
@MichaelTheakston5 жыл бұрын
I would say one that does at least 12", Anything over that I turn into firewood.
@brockjones13645 жыл бұрын
@@MichaelTheakston Yeah, I don't know what size branch it is but at some point they take up more room in the truck than if you just through a log in. It just depends on your niche and the size of your crew. You don't want to worry about how much room your using in an 18 foot dump with 6 guys on the payroll moving stuff like army ants. On crane jobs I like to have an 18" chipper, semi trailer and or dumpsters line up in a row.
@AdamSmith-uv6kr4 жыл бұрын
Thought about this unit to upscale from my pto driven chipper. No way. Obviously I was wrong. Horribly under powered
@mauroesquibel27675 жыл бұрын
It fails that bc 600 should be ashamed to be called a chipper
@juanhuerta51187 жыл бұрын
It's funny cause you look like my old art teacher from elementary
@MichaelTheakston7 жыл бұрын
Juan Huerta HaHa Awesome!
@pete28877 жыл бұрын
Too bad we didn't have those chips for the yard.
@moikechan5 жыл бұрын
Subscribe at getchipdrop.com/ for wood chips delivered to your house from local arborists for FREE!
@holymoly23306 жыл бұрын
You really thought it was a better idea to rent a chipper instead of just loading up That little twig pile ?
@MichaelTheakston6 жыл бұрын
I also did 3 more jobs that day
@jerrygoad30933 жыл бұрын
I get it buddy you're doing review on the chipper and you want to chip some brushI could put all that brush and some in the back of my avalanche not even smashing it down all respect good work nice equipment nice company mean no disrespect though
@jerrygoad30933 жыл бұрын
Oh yeah I love the box on the truck
@ahmadabadi73724 жыл бұрын
It is very slow
@bobkeeler59645 жыл бұрын
that's thats really slow
@577buttfan4 жыл бұрын
Its better than hauling the shit on a trailer too the dump!