Cummins Dyno & Dirt Drags Domination!!! | Junker Drag Truck | Power Driven Diesel

[@IanYav5.9]

Kicked out for having too rowdy of a run, that's a win in my book

[@RadDadisRad]

Event staff letting gassers run paddle tires but if a diesel does it it’s no-no.

[@Rx7man]

Mechanical Mafia for me.. Congrats on going to an event without a huge explosion!

[@jakeblackman5930]

MECHANICAL MAFIA!!!! Even if the junker wouldn’t have won, I’d still choose mechanical anyday

[@witcher71]

Mechanical Mafia! Junker, breakin hearts and breakin windshields!

[@pddofficial]

The only question left is what would have happened if Will would have grabbed overdrive instead of lifting? The world may never know!

[@TheFiremanJoe]

Y’all need to add Todd’s blow up from UCC to the intro!!

[@pddofficial]

Great idea!!!

[@mrmtn37]

Do it. Do it now!

[@slowaf_12v]

#PPumptheworld #mechanicalmafia I loved hearing josh admit defeat to a ppump!!

[@jeffbeaird747]

I like when Will describes the videos and all those little things he brings up makes for a better video. It’s a video about a weekend long event, a 8-10 minute video doesn’t do it justice. Not bitching just telling you what I like and appreciate thank you guys..!

[@MrShanegoldman]

Because I drive a 12 valve I am inclined to vote mechanical mafia be Josh's truck is very impressive and he definitely has heart.

[@mrmtn37]

Complaining about roost from paddles or otherwise at a SAND DRAGs is like laying new white shag carpet then inviting a Wheel Chair Basketball Team over?

[@bdjm8595]

Bahahaha !!!!

[@joshuaquilliam2887]

HAHA that's the greatest thing I have heard in a long time lmfao.

[@savagefabrication795]

Awesome video! I am die hard mechanical mafia but seeing josh take those stock appearing units that far is where my hearts at. Great job out there to yall.

[@ryanc8188]

Team full send to the end. If you're not sending it, it doesn't matter what you drive. 👍

[@robertsorah9544]

Mechanical mafia for life ! I have an old 12 valve in a 94 that is my pulling truck, i have put through the ringer for 8 years without a failure , now as far as drive train goes..... well , ya know hahaha 😆

[@bernhard8540]

Haha will is great haha i love his whole attitude he just has fun with it and that truck was scooting on that second run lol😂😂❤❤❤

[@mrmtn37]

I would like to thank yall for steppin up your game and sharing so much with all of us! Really thqnk you guys for all hou do especially ripping the Ford Powerstroke Emblem for a Company that overwhelmingly deals in Cummins lol hilarious! Mechanical Mafia!

[@73cjproject]

Wire fire gang for the win. That was an awesome show by the Junker Drag in the dirt drags! Nice job Will! Definitely respect the hustle for sure. Great job by both of you!

[@kdogsdiesel7594]

Is it just me or do they have the best intro music for their videos!?😁

[@goat3898]

PFI speed uses the same music I always have to look to see who Is on as I listen to most you tube at work

[@briangarvey4936]

Dang that 12V its puttin in work!

[@Balakay9435]

Hell Yeah Brother

[@samchesnut845]

This is one of my favorite channels. Thanks for the stories and videos. They are always entertaining!

[@cherokeelittle4582]

Team Will mechanical mafia all day long

[@Friend_of_the_One-Eyed_Ladies]

That was a wild video with the sand paddles! Loved it. Definitely deserves a place in the intro.

[@jacobdicesare2032]

Mechanical mafia. I drive a p pump truck and love it.

[@billspallinger9457]

Love the Junker! Keep making more power

[@godsgracefarm4576]

Made my day. Lmbo. That was an awesome run!

[@pddofficial]

Glad you enjoyed

[@terrancesmith1674]

All that matters is you never ever quit.

[@joevaagen6170]

What better way to test yours and your sponsors products than to flog the shiznit out of it until just before failure.👍

[@Ry_Guy]

Ah, baby wipe showers, been there many times brother. Yeehaw! Nice job at the event guys.

[@blake_brennan]

Everyone wants to see another sand drag event with the Junker!!!!

[@colinlawrence2186]

Awesome video guys it seems you had a great weekend thank you for taking the time to share it with us as always God bless you and stay safe 🙋‍♂️🇬🇧

[@brianehrsam9878]

Hell yeah brother, wire fire 4 the win 🏆

[@valve-do3jc]

Mechanical Mafia Good vid. Who hates on PDD? If don’t want your windshield broke don’t park in the line of fire.

[@tomh7044]

Wirefiregang for sure but that sand drag launch and take off was awesome 😎 definitely a great show!

[@nicholaswolf3096]

Mechanical Mafia! Even down to the fuel shutoff.

[@dragthatsht]

Mechanical Mafia

[@brianpuff9021]

12 valve all the way!!

[@mikestrucks]

Very cool video guys ! You both did awesome 💪🏻👍🏻

[@williamsmith286]

Mechanical Mafia,all the way! You guys crack me up!

[@gregdiaz5788]

I love all diesels but I will go with mechanical Mafia thanks for the video guys outstanding work

[@ricardobernal8897]

Having had both, 12 valve all day long. Still regret selling mine 2x 😞

[@joshuaquilliam2887]

Wire fire FTMFW!! But doesn't really matter as long as it's a Cummins.

[@bdjm8595]

Well done you guys, thanks for sharing the fun!!!!

[@bdjm8595]

Wire FIRE !!!!!

[@dieseldemon8562]

Great show y’all put on! 🍻 Will’s rooster tail put 1/3 of the fairgrounds into the atmosphere 😂. Making us choose between the stroked p-pump and the common rail?? Looks like a win either way!

[@montekingen8839]

Mechanical mafia!!

[@greendodge98]

I really have to go to Utah and meet you crazy guys

[@RadDadisRad]

I don’t hate PDD, in fact it’s quite the opposite. You guys are probably the main reason why I’m going to buy a Cummins powered truck.

[@fullfuelranch1358]

Great video guys, always entertaining watching and even listening to what diesel podcast has to say about you guys from events lol

[@daveknott9197]

Mechanical Mafia! but Josh is great too!

[@aaronacord6860]

Need to come to the midwest and pull we wouldn't even consider that a competition fit track to pull on

[@terrancesmith1674]

I would love to go to one of your events in Colorado common out to the mile high

[@pddofficial]

We will see what the year brings stay tuned!

[@supercharged2414]

MECHANICAL MAFIA all the way. No computer needed or wanted.

[@bernhard8540]

If it was my windshield, I would have just asked for one thing, an autograph on my windshield😅😂😂😂

[@pddofficial]

lol!

[@Richardbushell72]

mech mafia!!!!!!

[@firstgeneralee2105]

Mechanical mafia! Montana for ppump my windshield was cracked before the rooster of dirt!😂

[@michaelwigley8856]

Mech mafia from the guy that drives one of the first 1994 p pump trucks to come off the ensemble line and now has over a million miles on the truck. The engine all factory never been opened up and she still going strong but has a tad bit of blow by. I think its about time for a overhaul tho. Old school the best.

[@pddofficial]

Million miles!!! Awesome and congrats on keeping it on the road that long!

[@mcjrzeus]

Wire fire gang for me but your p pump is awesome too

[@tuffy16]

Nice !

[@hazzurs]

I found a 12 valve cummm 1998 / 191,000 miles for 5,000 healthy engine but rusted frame should I purchase it ?

[@markrich3271]

Common Rail , I have a vp truck and wont p-pump it because of losing the adjustable timing .

[@Smokey72013]

Nice job to the both of you. Josh great thinking swapping out the cartridge vs changing the bearings. Would a billet wheel make a big difference in piwer?? I thought they just were safer aka won't explode as easy

[@pddofficial]

Billet wheels that are larger definitely add more power.... Josh dyno'd 900+ with a 67mm billet wheel version of the same HE351cw turbo whereas the factory cast wheel peaked out at 660 or so HP, and the cast wheel only survived one dyno and one sled pull. Stock sized billet wheels can be spun to higher RPM before they come apart so although a stock sized billet wheel might have only made the same 660 HP +/- 15HP, it would have survived the dyno and both pulls. When cast wheels are oversped, they shed material and get out of balance which then makes them rub, wipe out bearings, etc. Since the billet wheel is stronger, it is more tolerant of the high shaft speed and takes longer to go out of balance and wipe out the bearings. The larger billet wheel is actually more reliable because it slows down the shaft speed from the larger compressor and stays in-balance and bearing last longer. The larger billet wheels are heavier and therefore less tolerant to rapid changes in turbo speed/barking/surging which results in broken shafts. So it really depends on what you're doing with the charger to say which wheel is best.

[@Smokey72013]

@@pddofficial Very nice answer. I was looking at it as a apples to apples comparison. So same sized wheels you said the same thing I did but way more detail and reasoning. Thank you for that.

[@VulcansCreator]

Mechanical Mafia!!

[@ports787]

Mechanic for me all the way but when it comes to drag racing I think we are the underdogs now. Sled pulling I think p-pump Still has it!

[@jpin2469]

Mechanical Mafia !!!!

[@lincolnwilliams6905]

I need one of those 116 mm turbos forget you guys sell them ?

[@toddsculley2710]

Loved it

[@idriwzrd]

Baby wipes are a luxury.

[@Daniel_kruger]

I dont understand why you dont have more subscribers...

[@Friend_of_the_One-Eyed_Ladies]

Will is good with a camera in his hand.

[@blakedismuke3656]

I love it guys you guy go crazy with this stuff will you guys get a hold of diesel bros and make jaxs cab over truck a monster or do it on horse torque idk just do some big truck to get more people also daily vlog and hire someone to chop it. Also there's another guy who's great I will replay when I figure it out.

[@blakedismuke3656]

Gentry and sons!!! Ol' son that dude is about to go to the moon with subs. You need to help that man and follow him up Detroit for the win with him

[@christopherperigo2515]

Wire fire gang!

[@Jim_Lawrence]

Oil Fire Gang! 7.🌳

[@paullane7489]

I like both trucks but I’m more of a wire fire gang type. 👍🇺🇸👍🇺🇸

[@wesleytruax2469]

Mechanical mafia for the win

[@bernhard8540]

What's happening to the world.. we can have fun but only so much.. I mean these sports are about balls to the wall all out and let's see who's faster.. and because one guy is just better he can't compete.. maybe setup the track correctly and be prepared for any amount of power.. this isn't 1990 where 1,000hp is totally nuts.. lol personally will won in my eyes. If people are crying over stuff they could easily use then your doing something right haha but im glad you guys had fun and brought home trophies ❤🧡 :) just wish the world wasn't so soft anymore

[@joshuatravis6350]

Mechanical mafia for me!

[@DroppinDrakes98]

I’m trying to change the game down here in the dirt drags in Mississippi and build and Diesel. I have a p-pump 12v just wondering if you have any advice and knowledge to help me out

[@bcbloc02]

Good old p-pump for the win! So what injectors is Will running?

[@pddofficial]

They are some old dual fed 5x018 VCO's that Will bought used from a midwest sled puller back 10 years ago.... old technology that still works apparently!

[@ricardobernal8897]

@@pddofficial Proven and true, long way chargerwise from the 35/3b combos From back in the day.. makes Me regret selling mine so much

[@tacticalrepair]

Mechanical mafia!

[@scottphillips4594]

MECHANICAL MAFIA!!!!

[@Xoner30577]

Hell YEA

[@blakedismuke3656]

I love this video man

[@coalstang]

Is this a 12mm pump record? dam those are impressive numbers. is it a seth pump maxed out? gives me hope that my combo could really rip one day. what injector and delivery valve and timing?

[@pddofficial]

As far as chassis dyno, we've never seen a 12mm pump anywhere that has hit 1500+ HP. Even 1400+ HP is RARE on a 12mm pump. As far as engine dyno, I've heard a few dyno operators claim they've seen a 12mm pump hit 1700 HP on the engine dyno. And yes, it's a standard maxed, balanced, full cuts, 5k spring 215 pump that pushes 650 cc's.

[@coalstang]

@@pddofficial dam congrats on that number!! i got to get some 5ks off you guys.

[@ProjectNotSoSlow]

Wirefire daily 100% Mechanical Mafia to play!

[@daver.9971]

I love my 97, and i also love my 07

[@nate_588]

MECHANICAL MAFIA ALL DAY BABY!!!!!

[@alphagaming7267]

I live 18miles from hamilton MT 😁😁

[@waynelevitz6672]

What, no love for us vp44 misfits... lol

[@stiffdrinkmime366]

Lol. All the failures of computer controlled trucks with almost none of the benefits! My '99 still gets it done, but is far from powerful

[@jaythacker5160]

wire fire gang, no doubt baby

[@adambrink4475]

Nice!!!!!

[@darrickissinger3932]

I'm wire fire but love these boys

[@TimGarbat]

Mechanical mafia

[@bryanford1139]

Mechanical Mafia!!!!!!!!!! :)

[@adambrink4475]

Should I buy a 2017 and let you build it for a daily????

[@dustinyoung4681]

Mechanical mafia all day

[@jwfurniss]

but who got kicked out?

[@davidspeyers]

MM for the win!

[@havasu1326]

WireFire Gang

[@jamesbarber8308]

Stock block and head ?

[@pddofficial]

Stock block 0.020" over, and a ported OEM head

[@jamesbarber8308]

@@pddofficial oh nice

[@davezorn]

sorry cant decide - they both have their place

[@lynkcurrentson]

Will the goat

[@2eyedjack433]

Got a P pump and VE pump. No wire fire or fire wire... whatever you called it. Lol..