Can Am X3 Gets Boat Sided & Ibexx Crawler 226 | Final Drive Gear Installation in a 2017 Can Am X3

Thanks for watching!
By using this amazon affiliate link we earn commision that helps support our channel, its free to use and doesnt matter what you purchase as long as you click the link first.....
amzn.to/4dZmSJj
THE CAN AM CREW LLC
Please remember to click the like button and be sure to subscribe to The Can Am Crew to help us grow and to stay in touch with all our awesome adventures...
WAYS TO SUPPORT US:
Become a Channel Member and get Behind the Scenes Info
/ @thecanamcrew
Support us on Patreon - www.patreon.com/thecanamcrew
You can get Merch, GPS Tablets and much more on our Website www.thecanamcrew.com
follow us on facebook
/ the-can-am-crew-139518...
follow us on instagram
/ jhatch_x3
/ thecanamcrew
Check us out on TikTok
The Can Am Crew
The Can Am Crew LLC Line Up of SXS's can be seen at www.thecanamcrew.com/ourrides
CHECK OUT OUR SPONSORS
Ben Franklin Range Offroad Park
PA's best offroad park located in Templeton just outside Kittanning
www.benfranklinrange.com
Big Earl's Campground
Located near the Hatfield McCoy Ivy Branch Trail System and direct trail access to Little Coal Outlaw Trails..
/ big-earls-campground-4...
www.bigearlscampground.com
Devils Backbone Adventure Resort
Located on the Hatfield McCoy Devil Anse Trail between Rockhouse and Buffalo Mountain Trail Systems
www.devilsback...
Alpha Powersports and Specialized Vehicles
Central PA's Finest Can Am Dealer and Outboard sales....
www.alphapower...
hilltopescapew...
Hilltop Escape offers vacation rentals and a restaurant on site with a popular trail access location. Campground and Cabins available and they are located directly on the Indian Ridge Trail System
Sam the Concrete Man
Finest Concrete Man in Ohio
Check his page out on facebook
My Closet Guys
www.myclosetguys.com
Custom Build Closet System Experts
We are known throughout Southern Maryland and Northern Virginia as the premiere organization and storage space experts. Here at My Closet Guys, we provide custom closet, organization, and storage space solutions for home and commercial use.
Ride Royal Blue is a premiere lodging and campground location and is located in Pioneer TN and lies up against some of the best riding Tennessee has to offer. they have direct trail access to over 600 miles of trails and borders Brimestone, WIndrock and Tackett creek. rideroyalblue.com
Blue Ridge Comfort HVAC, LLC
If your heating and air conditioning system isn’t keeping your home warm or cool enough, your utility bills have suddenly increased or you notice any other problem, schedule your HVAC repair as soon as possible. Waiting to address the problem causes added wear and tear on the system, which can lead to a bigger more costly issue. Check out www.blueridgecomforthvac.com
RJR Offroad
check out RJR Offroad on all social media platforms for some great offroad content
NFLOW
NFLOW Remanufactures atv and utv engines and also offers machining and rebuilding of engines, if you find yourself needing an engine or engine work definetly check them out at www.nflow.com

[@MrEsimmons178]

I love how Tim’s machine looks, i am really digging the skid plate doors (minus the auto open feature). Just an awesome build all the way around.

[@TheCanAmCrew]

@@MrEsimmons178 haha, we fixed the auto open issue so we should be good on that for while.

[@nolimitsautobodyfab5117]

Great build videos love all the little details when doing repairs an maintenance..

[@Cbaker521]

Digging the boat side 🔥👍💯💯

[@micq61977]

I have 2300 engagement with my STM Clutches. Cant say i like it. I had it dialed in on Whalens dyno. Ive gotten use to it lol

[@p.t4769]

Man that x3 needed a lot of work to only have 4K miles, it must be rode hard, great learning video, I have a cammander but will definitely be pulling my axles every thousand miles and greasing 👍

[@derrickbilodeau1435]

Mine at 50 hours and about 750 miles. Few months old. One side had plenty of grease and looked fine. Other was bone dry and axle came out hard. Will probably pull them every 50 hours or atleast 2x a year and pack full of grease.

[@TheCanAmCrew]

@@derrickbilodeau1435 that is definitely a good habit to get into.

[@destinhook3826]

Excited for the yxz cage and especially ready to see that fender delete on the rzr

[@davekrenz1202]

I would be so embarrassed bringing my machine to someone to repair without washing it first.

[@judyhatch365]

Keep up the great work 🤗

[@miller440x]

My kwi kit always did the same and couldnt tune it out, hit rpm and than drop 4-500rpm, ibexx 💪

[@Blitzed96]

Did you change anything else when you went to ibexx? Mine is doing the same rpm drop. Thought maybe belt or just need a good cleaning in the clutches. I'm bum med that this is a problem.

[@bobsams737]

So im assuming you are taking the rear axles apart and just pulling on the cup to get them stubborn sob's out?

[@TheCanAmCrew]

@@bobsams737 it really just depends. Sometimes the axles will come out but on this machine they were extremely tough. We ended up using our axle puller. We do have a new design on our website after we had some request it. With the new design the shaft can stay intact.

[@Blitzed96]

Was anything else changed with the ibexx clutch? ( belt and or cleaning) My kwi kit is doing the same thing, but worked great when first put in. Debating on Whalen's machining for the clutches, or just buying ibexx. Wish I could do a trade in lol.

[@TheCanAmCrew]

@@Blitzed96 I’ve had so many people reach out to me about there clutches doing the same. We’ve tried to dial the kit in but couldn’t get it any closer. I’d just go with ibexx. You will be extremely happy with it.. they told tim he needs to pull it and clean it every couple rides but who wants to deal with that.

[@Blitzed96]

@TheCanAmCrew I blow mine out every couple of rides. Do they want the clutches pulled and taken apart to clean? That would be a hassle. If that's the case, I'll be ordering from you.

[@TheCanAmCrew]

@ yes. They told him that they need pulled and cleaned. Especially the float mod was to be pulled cleaned and greased.

[@Blitzed96]

@@TheCanAmCrew ok, sounds like I know what I need to do. Never did their float mod, but don't think I will be. Thanks for your time and info.

[@eastcoastriders1267]

my rears i found a oring i put on the splines. noticed the fronts had orings on the splines so tried it with the rears XD. let ya know in lik 5k mile lol

[@TheCanAmCrew]

@@eastcoastriders1267 the rears actually have o rings from the factory but they wear out and disintegrate pretty quick.

[@ramonruybal9808]

I'm just over 4k , right rear not driving, im guessing final drive also , you guys get any discounts on the part or recommend ware to purchase, and hopefully the axles will be good ,or also replace them ? Getting ready to tear into mine

[@TheCanAmCrew]

@@ramonruybal9808 we can get you parts for sure. 100% replace the axles. That is what caused the gear to strip.

[@ramonruybal9808]

@TheCanAmCrew Uuuuggg getting expensive lol ,have a ruff guess on price on axles and final drive ? Thank u for ur help

[@TheCanAmCrew]

@ 200.00 for each axle and 300.00 on final drive gear.

[@ramonruybal9808]

@@TheCanAmCrew ok thank you ,I'll get it apart and see what went bad

[@andrewlynds2973]

Imagine. Here in Canada🇨🇦🇨🇦 329 an axle and 409 for final drive. Mine just let go last weekend 😢 I saved this video as a how to lol

[@dewainbrown993]

Hey guys love the videos I would love to see you guys do a video on a set of the system 3 500s tires. I know you guys are zilla fans but would to see your thoughts on the system 3s sticky tire. Keep up the great content an hopefully one of these days I will run across you all out on the trail

[@TheCanAmCrew]

@@dewainbrown993 thank you. I have seen other reviews on these tires already and they aren’t good enough for us to run judging off others reviews. Zillas are still king for now haha

[@ilija6368]

What do you charge to build a cage? I’m looking to get one done on my turbo S.

[@TheCanAmCrew]

@@ilija6368 send me an email of what kind of build your looking for. main cage, bumpers, powder coat, paint, basic bends, flat roof etc or send me some pics of builds you like and I can get you a price. A basic build would start around 1800.00 and go up from there