Xbox Series S Beeps But Turns Straight Off! Can I Fix It?

[@TheCod3r]

Hey everyone. We're so close to 100k now. Plesse share like you're in an AA meeting! Help spread the word on social media if you can to get us over the line before the end of the year ❤

[@shakangel666]

Amazing troubleshooting and schematic diagnosis. I find it amazing how you tackle a previous repair attempt (nightmares). Keep posting those really complicated repairs!!! Amazing content for us mid level technicians.

[@MikeGervasi]

Brilliant, Phil. Nice to have working boards as a comparison. Cuts down on figuring out what something SHOULD read.

[@vascomiranda8465]

Hey mate, I would like to thank you for answering my question about the ps4 with the dead encoder chip Ended up needing to replace the filters as well but hey it works now And to top it all of it was exploitable, cheers mate :)

[@martinhammerton8157]

Always a great day when you post a video your a great guy won't be long before you get 100k

[@TheCod3r]

Thanks buddy, I really appreciate that 🙏

[@archiepbrill3rd977]

Love your work. Can't wait for you to get to 100k😊

[@TheCod3r]

Thanks buddy, I really appreciate that! 🙏

[@jacomaree78]

AWESOME WORK Phil!

[@ArtoriasNX]

Not far off 100k now mate! I'll share as I am able!

[@TheCod3r]

Hell yeah thanks so much bud. Really appreciate the support 🙏

[@a.p.3439]

Hello Phil! Thanks for your video. Why do you often work on the Series S consoles, do they have any known issues?

[@jaysonhaworth5531]

Where can I get the u129 from?

[@kikihobbyrepair]

Nice fix Phil.

[@davidcarreiraphotographie4387]

Hi, great video. How do you clean motherboard on ultrasonic? temp, products...? thanks

[@MrFloydBiggles]

Good work, dude!

[@mjc0961]

10:32 - what. is. THAT. Is that some kind of bodge wire or something? Messed up trace?

[@mjc0961]

20:56 yes, thank you, get rid of that mess the last person made

[@Unsocial200]

Sorry if I missed it. Did you work again on the Samsung and LG TVs ?

[@MikeGervasi]

Can we agree that while being able to locate prior repairs helps you troubleshoot, the fact flux is the giveaway is disgusting?

[@djm9937]

Great job ! my Alexa couldn't find a group or device named 'office'

[@Tysman909]

Who ever is releasing schematics for xbox consoles is very helpful

[@hardkore360]

My readings on that resistor goes up from 5k and up a bit, never reaching 10K, what gives? I even removed the chip above it and replaced with a good 10k resistor measured before soldering it onto the board.

[@Sergei-King]

Your channel is honestly so underrated. I always prefer to watch your videos over anyone elses when it comes to this stuff yet you aren't even at 100k subs yet. Confusing... So many more clueless solder blokes out there with 800k.....

[@TheCod3r]

Thanks bud. I appreciate that. We hit 100k now so thank you for helping get there ❤🎉

[@Sergei-King]

@@TheCod3r My pleasure man appreciate you & everything you do for the community! Proper legendary! Keep on doing your thing man!

[@Vo0d0o2009]

the black and red wire drill i love this , ahahha i presume its for charging it :D

[@dodgydruid]

Well I done a goofy one lol Won a Xbox One X for £4 sniping in at the end of auction and spent more on postage than Xbox lol I've got the equipment, got the accessories like liquid fluxes and good solders so should be an interesting project and what have I lost at £9? Education is worth that all day long lol Still not plucked up courage to tackle the docking filters on my Switch, still learning the hot air gun and its foibles, bought a load of Aliexpress practice kits and first one the bluetooth speaker turned out OK, so getting there :D

[@joshuarudd7690]

My mates xbox series s does the same comes on then turns off never been opend up

[@kelvinbryant7600]

Hey I need my xbox fixed how do I get in contact with u

[@dman757575]

hello i was wondering what my unique issue could possibly be . My series s turns on with no signal . I am not able to Hard reset and it doesnt provide the beep or give a signal still . The system turns off on its own after a couple of minutes as well . Ive tried all basic trouble shoots and even microsoft tells me to send it in ( 270$ charge) . Is this an SSD issue or board problem?

[@garethlloyd48]

I just brought an xbox series x that needed a chip replacing. So I find the chip that's gone one of the power phase mosfet's u48 and it's blown so hard only half of it is left and you can see halfway through the board. Do you fancy a impossible repair @TheCod3r😅

[@Blaszow]

Do you know if for example: MP2855 controller from aliexpress will work with xbox series s because I heard that these one needs to be programmed or something?

[@Cod3_nam3]

Good job!

[@bruh-hp7kc]

do you have any tips for getting into soldering and microsoldering like on how to practice for them or things i should learn to be able to fix so many different things, thanks

[@christophervanzetta]

Buy some cheap or get free boards and practice

[@alexanderbielski9327]

Mine is having this problem. Is there a for dummies quick version like wrap it in a towel like the 360.

[@TheCod3r]

No don't ever wrap it in a towel. There is no quick fix for this. If you have this issue you need someone who can fault find it properly

[@hubbardknives9073]

So im troubleshooting same issue. I opened the case up which hasn't been opened still had the sticker seal on. Spent a couple hours just looking over the board trying to find anything obvious to no avail. Tested the power supply 12.2v output. So go the meter out testing the 12v circuit ran into v_sophy circuit found that L1 is reading 92.1 ohms print calls out 0.01ohms so im thinking L1 is bad but 100% sure. Would be helpful if anyone else has found this. I don't have another unit to test to verify my finding.

[@ajaks7636]

Nice! when you said you mother F...., I thought you were speaking directly to me. 😁 Great Video and Repair.

[@abdvivi114]

Hey .. is it possible to transfer ssd from one dead xbox to another one ? Or that can do some issues ? Thanks in advance

[@H4sone87]

Great job

[@ak_vg9715]

Nice video 👍

[@flusher35]

next time you might want to check for enable signal first before replacing that 0.75v step down ic ;)

[@stevendoyle4522]

Dude love your videos But please don’t ask Alex to turn off your office I came out to my living room at lunch time to watch a quick vid and you managed to shut down my entire home office… 🤦‍♂️

[@rickchowsr2532]

Justa suggestion Turn your air speed down a bit so that your components don't go flying to the 9th dimension lol

[@fu1r4]

Learn how to take off the X-clamp the correct way!

[@TheCod3r]

I'm pretty sure I took it off safely bruh

[@spelaoxy]

Jeaaaa boy 😂

[@alexanderbielski9327]

Ugh this is abysmal. To poor to buy a new one to dumb to fix it.