Step by Step 20’ Shipping Container Modification

  Рет қаралды 950,915

The Container Guy

The Container Guy

Күн бұрын

This Shipping Container Modification Step by Step instructional video explains the process of installing a door, windows, vents, strut channel framing, spray foam insulation, and single circular electrical into a 20ft, one time use (like new) shipping container. This modified 20 foot container is for a honey bee farmer, and we will take you along as we convert it into a Honey Processing Room.
Check out our latest 20' Container Mod here: • Step by Step 20’ Shipp...
We will show you how to frame, insulate and line a sea container!
Timestamps:
0:00 - Introduction
1:04 - Windows & Doors
6:44 - Container Door Flashing Kit
8:47 - Strut Channel Framing
11:41 - Passive Ventilation
12:00 - Spray Foam Prep and Application
19:58 - Electrical
20:58 - Conclusion
Do you want to start planning your modified shipping container? Go to www.planmycan.com/ to get started.
FOLLOW US ON OTHER CHANNELS 👇
➡️ Facebook: / thecontainerguy.ca
➡️ Instagram: / the_container_guy_
➡️ Merch Store: thecontainerguy.myspreadshop.ca/
-----✪✪✪-----
🛒 SHOP ON AMAZON
||CANADA || USA ||
Container Modification World’s Products:
WINDOW F R A M I N G KIT S:
NEW & IMPROVED WINDOW FRAMING KITS
NEW 42" x 30" Side Wall & 48" x 30" End Wall (Amazon Canada): amzn.to/3OxeeIm
NEW 42" x 30" Side Wall & 48" x 30" End Wall (Amazon USA): amzn.to/479F54v
(M S S ) Modular Strut Systems Products:
**CSM Brackets (Amazon Canada): amzn.to/3TnGxct
**CSM Brackets (Amazon USA): amzn.to/3TpgAJs
**CSM Roof Bracket (Amazon Canada): amzn.to/3RgS77o
**CSM Roof Bracket (Amazon USA): amzn.to/3CJYhJ8
VENTILATION
Big Air 45 Vents:
**Big Air 45 Vent (Amazon Canada): amzn.to/3wCAirk
**Big Air 45 Vent (Amazon USA): amzn.to/3AvmsZ7
SECURITY
Lock Box:
**Bolt-On Lock Box (Amazon Canada): amzn.to/3AV1V1u
**Bolt-On Lock Box (Amazon USA): amzn.to/3AV1V1u
-----✪✪✪-----
Check out CMW’s website: containermodificationworld.com/
www.tcg.ca
At The Container Guy, we are constantly developing new products and engineering practices. We know how to convert sea containers without compromising the integrity of the structure. This channel will take you along as we convert Conex boxes for our clients and show you the proper way to install accessories.
We also hope to provide the shipping container home and tiny home following great tips on how to modify sea cans properly so you don’t make the same mistakes I have!
Our company is based in Saskatoon, Saskatchewan, Canada. Although we cannot modify shipping containers for everyone, our available products can be sent anywhere in North America. These products and designs are forever changing. Be sure to check our website to keep up to date on the most recent versions.
**As an Amazon Associate, we earn from qualifying purchases.

Пікірлер: 419
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Check Out Our 16' x 40' Header Kit - No Welding😆 👉kzbin.info/www/bejne/eYDGoHybZt-tqpo
@nunyabizness3382
@nunyabizness3382 Жыл бұрын
What did the finished unit sell for?
@amadueskooler6559
@amadueskooler6559 Жыл бұрын
what is the cost to do this ?
@allenmitchell638
@allenmitchell638 Жыл бұрын
How much
@briandonovan6546
@briandonovan6546 Жыл бұрын
no response on this one I see
@h.m.5724
@h.m.5724 Жыл бұрын
Can you please give me the dimensions of the underneath channel at the bottom of the container. We are building a container and I think my boss made a mistake
@Discovery123.
@Discovery123. 2 жыл бұрын
I was a welder and fabricator for a long time and I can say that this gentleman is really know what he’s doing. I wish I have a space for this container. Thanks!
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Thank you. That means a lot given I'm a CPA (Chartered Professional Accountant) by trade and learned everything the hard way on my own alongside some great welder/fabricator employees.
@user-lj1mq7lv7x
@user-lj1mq7lv7x 8 ай бұрын
I live in Thailand. Containers are not commonly used as houses here. Most of them are used as temporary offices, but I will build a container house myself. Thank you for the good knowledge 🙏
@joey4277
@joey4277 5 ай бұрын
Is that your pet or dinner?
@user-wj3ct4vb2t
@user-wj3ct4vb2t 4 ай бұрын
@@joey4277 bruhhh💀💀😂
@ToGdBear
@ToGdBear 2 ай бұрын
To my knowledge, choosing to use a container as a living space is a decision not made with money in mind but strictly because it looks nice and it's a cool idea, stacking a bunch of "bricks" to make a house. Don't dive in with the wrong assumptions: It's not ecological (you should not use old decommissioned containers, at least for something you intend to be a living space), it's not necessarily economical (check your local prices and try making some estimates, then look at other options and compare), and it comes with its unique challenges (these videos contain plenty of information covering those). Container offices are popular and practical because they're easy to set up for something like a construction company with trucks on call and there are companies that produce and rent them. Container homes aren't really popular anywhere, even for making sheds and garages the typical choice is finding other types of wood and metal prefab kits, though that is not to say they aren't cool and you shouldn't try it. If I didn't think they were neat I wouldn't be here, just settle your expectations.
@alanmcrae8594
@alanmcrae8594 2 жыл бұрын
A complete shipping container conversion system is, of course, the way to go if you're diy and don't have any design/construction experience. These guys have done the heavy lifting and figured out solutions to the most basic conversion needs. So glad KZbin recommended this channel as we're seriously thinking about a shipping container tiny house for our future.
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Thank you Alan. You're a smart man! Each product is very front-loaded with engineering/design and prototyping costs. A lot of what we have developed was meant to assist ourselves in installing windows, doors & roll up doors as quickly as possible in Canadian winters with no painting required. What resulted is kits that are Do-It-Yourself worthy. I'm excited for you to watch our videos on our bolt-on double-wide kits (16'x20' and 16'x40' containers!)
@alanmcrae8594
@alanmcrae8594 2 жыл бұрын
@@TheContainerGuyTV Hey, that sounds like a good product as well. Looking forward to taking a good look at your entire product line & conversion videos. Very timely!
@martinakahl632
@martinakahl632 Жыл бұрын
Absolutely love this , I am about to make a 40ft container into my new Office building.....love all this. Thanks so much guys!
@fredericksullivan7925
@fredericksullivan7925 Жыл бұрын
Nice work guys. I put a 4.6 m slide door in one and the roof sagged. I noticed the ridges and valleys at the header spread out so I stich welded a 50X50X6mm angle iron along the head to the inside to stop the corrugations (ridges & valleys) from speading and it worked. I set a slight positive camber in there as well.
@lynetteprimeaualharris9795
@lynetteprimeaualharris9795 5 ай бұрын
Great video. Helpful & informative. I just love this idea! As a retired Trucker, I find the idea of a shipping container house very appealing! I own my own land with a pond & Mountain View’s. This project sounds perfect to me!
@jbman413
@jbman413 2 жыл бұрын
Fell in love with unistrut about 25 years ago. :)
@AngraMangi
@AngraMangi Жыл бұрын
You Sir, have just won yourself a subscriber to your channel, much respect from Papua New Guinea and the beautiful Pacific Islands 💯👍🇵🇬
@mangobread
@mangobread 2 жыл бұрын
about to start my conversion and doing windows first. by far most helpful video.
@ogcardscammer4921
@ogcardscammer4921 2 жыл бұрын
I just discovered your channnel I’ll be binge watching over the next several days blessings
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Thank you so much for the support! Don't forget to check our channel every Friday!
@dar7771
@dar7771 2 жыл бұрын
Dang. Very impressive. Makes me want to buy a piece of land somewhere in the hills and do a shipping container with this mod kit. Thanks for sharing.
@SafetyRey
@SafetyRey Жыл бұрын
Literally why I'm here. Nice piece of land, a roof. Just me on my own.
@jacelandadventures1523
@jacelandadventures1523 2 жыл бұрын
Such a great build thank you for sharing!!
@keithprinn720
@keithprinn720 Жыл бұрын
brilliant kits for these requirements obviously from stacks of thinking and trials. great option to get your pre modded container for me.
@Jinzolord2011
@Jinzolord2011 2 жыл бұрын
I just started looking at your channel. Great work!
@deadly134
@deadly134 2 жыл бұрын
man i remember you from the den, very well put together and thorough but this just shows you care about the customer. you show exactly what you are doing and why you are doing also not stopping other DIY people from doing it. cheers and great work!
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Thanks! I appreciate that!
@Taketheride23
@Taketheride23 2 жыл бұрын
This is brilliant, I may pick up a kit for my 40' high cube I want to convert into a shop.
@buggyonwheels1739
@buggyonwheels1739 2 жыл бұрын
Great job! Thank you for good review!
@googlemustdie
@googlemustdie 2 жыл бұрын
Really like your presentation. Beautiful product. You really have figure this out. Very much like your sincerity.
@dallinfreestone7841
@dallinfreestone7841 Жыл бұрын
the window kit is great as well as the door flashing.
@ReynaMagdaleneD.Picorro
@ReynaMagdaleneD.Picorro 2 ай бұрын
I just got my 40ft container from Wuwi Shipping Container very cheap and even paid it upon delivery. cant wait to start working.
@anothergoogleuser
@anothergoogleuser 8 ай бұрын
Very detailed and instructional. Thank you for sharing.
@nadinelee2728
@nadinelee2728 2 жыл бұрын
My First Time Watching Your Channel And I’m Absolutely Happy Because I’ve Never Seen Anything Like This Ever🧡💚🧡
@andyclark1590
@andyclark1590 2 жыл бұрын
Very informative, given me great ideas, cheers buddy
@bigb6548
@bigb6548 2 жыл бұрын
Awesome video. I definitely want one of these soon.
@MakeWeirdMusic
@MakeWeirdMusic Жыл бұрын
This is pretty brilliant. Great work.
@charlesfrank7854
@charlesfrank7854 2 жыл бұрын
Metal nibbles their like scissors great for that ,used to use them on corrugated on pole buildings.
@fixingscreens7075
@fixingscreens7075 2 жыл бұрын
I love the track system for supporting desks and pipe racks etc. You could even use it with track roller attachments to a make a gantry crane right down the center of the roof of the container.
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
We have a 20'HC in our yard right now with a gantry crane down the middle using this strut system. I could do a quick video tour of it if anyone's interested. It's pretty sweet.
@Bubbles-em2fb
@Bubbles-em2fb 2 жыл бұрын
@@TheContainerGuyTV I'd like to see that
@maurolimaok
@maurolimaok Жыл бұрын
Nice video. Nice to know how things are done.
@jnrroseville6715
@jnrroseville6715 2 жыл бұрын
Beautiful work my guy!
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Thank you!
@Alkihauler
@Alkihauler Жыл бұрын
Amazing! I want to build a tiny guest house for my family to visit!
@mltndeal5120
@mltndeal5120 2 жыл бұрын
I need one of those containers. Insulate it, metal-stud frame it, drywall and put a stove in it. Yep 👍 I would hat channel it. I'm metal stud framer so I HV lots of ideas. I've seen job trailers at construction sites that use modified shipping containers. Nice idea about power in to the container.
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Hi Milton. We have a mod right now that will not be insulated but needs to be lined with plywood. We're testing out the hat channels tomorrow actually. We're capturing video of the project. Stay tuned to the channel so you can tell us what we did wrong😆 Think we can glue them with PL to the putter corrugations?
@hvacstudent967
@hvacstudent967 Жыл бұрын
This is amazing! Exactly what I want to do with my life. Sweet channel bro.
@IvoryS2012
@IvoryS2012 8 ай бұрын
This is a wonderful video. The video was informative and very helpful. Thanks for sharing your products. You did a great job. 👍 thanks for posting.
@motionsick
@motionsick Жыл бұрын
Thanks for all the info on this channel.
@zbigniewteterycz1571
@zbigniewteterycz1571 Жыл бұрын
SUPER IDEA .POZDRAWIAM .
@torilatina
@torilatina 2 жыл бұрын
Just love this! I've always wanted to turn a container into an affordable living space. Do you have any vids on how you would finish the walls and door?
@darknessislight3689
@darknessislight3689 2 жыл бұрын
Love your channel 😃👍🏾
@eliasramon7965
@eliasramon7965 2 жыл бұрын
Entre por accidente arte canal Y terminé suscribiendo amé Qué buenos videos Saludos desde Colombia🇨🇴👈 03 .13 .22
@bhivanjoyfeliciano9543
@bhivanjoyfeliciano9543 2 жыл бұрын
Thank you sir mabuhay po
@garnettplummer1092
@garnettplummer1092 2 жыл бұрын
Great job . I apreci8 the info. I planned to do a 20ft shipping container home for myself some day to come. These information will be just perfect for me. Tkx
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Glad to help!
@ducatirottie
@ducatirottie Жыл бұрын
Sheer brilliance!! i salute you! 💪🏽🙏🏽👍🏽
@TheContainerGuyTV
@TheContainerGuyTV Жыл бұрын
Thanks. This was our first video.. they get better haha
@cafekiva7892
@cafekiva7892 Жыл бұрын
Great video, mate!
@JohnVanMeter58
@JohnVanMeter58 Жыл бұрын
I'm impressed.
@JTWorld210
@JTWorld210 2 жыл бұрын
Awesome 👏🏼
@RamblingsWithDan
@RamblingsWithDan 2 жыл бұрын
Great work. I'd love to have a couple 20 footers. What is roughly the cost of one done exactly like this?
@theflyingpostmane
@theflyingpostmane 2 жыл бұрын
I’ve used unistrut to make roof racks, mount plywood to walls, ladders, it’s just as this guy says, Lego for big kids!
@LS-br3rp
@LS-br3rp 2 жыл бұрын
Good video 👍 in the uk we call the spring nuts zebs or zebedees
@titi-ul3tb
@titi-ul3tb 2 жыл бұрын
Wow. Can't believe it. Nice job. For all the things you did for this 20 ft container (windows, door, insulation foam, ...), how much one would have to pay for this alteration work ? I am curious to know since I want one.
@getsimplebox
@getsimplebox 2 жыл бұрын
Great video. Good tip on the bulb seal. Would a pair of tin snips help cut that a little quicker and cleaner? We're a continuous improvement company so we are always looking for a way to save even 2 seconds on something that we do more than once. Keep up the great work.
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
You bet. Thanks for the compliment and suggestion. I just didn't have a set in my tool belt. My pants are already getting heavy haha. A sharp knife blade would have helped too but snips are a safer option for cuts that don't need to be offset.
@georgeanguiano9937
@georgeanguiano9937 Жыл бұрын
Thank you for sharing GBU !!!
@lisetteem588
@lisetteem588 6 ай бұрын
Evn to im not a tehnical person, i loved the attention to detail.
@sandepo
@sandepo Жыл бұрын
great video broh.... suka cara jelaskan ...
@robtheknob7791
@robtheknob7791 2 жыл бұрын
This is great!
@maurolimaok
@maurolimaok Жыл бұрын
Very nice video.
@eduardonieto2355
@eduardonieto2355 2 жыл бұрын
That is cool.
@elbassaraghii5744
@elbassaraghii5744 3 ай бұрын
The pre made window 👌👍
@seegte1704
@seegte1704 2 жыл бұрын
Genial saludos cordiales desde Patagonia Chile..
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Thank you!
@davidknight717
@davidknight717 Жыл бұрын
I really like your videos and all the input you put out there for the public. Very informative and creative. And I hate to be negative, but at about 12.45 in your video you said you would have 2 inches of spray insulation. I have built quite a few of these, with spray foam and board foam insulation. Unistrut is 1 5/8" tall, the insulation thickness after completion is definately not 2" thick, possibly in the corners, but not consistent through out the unit. I do not care about the 2" statement of insulation coverage, but is the coverage shown in the video enough? I have never had to do one by code, but Im betting you have. What is acceptible?
@vegetablesouper9379
@vegetablesouper9379 Жыл бұрын
Nice, easy caulkJob?! ...best ever
@hollywoodhate3100
@hollywoodhate3100 2 жыл бұрын
Kickass video looking forward to more videos of my favourite you tube star 🤟🏻
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Make sure to check in tomorrow! We will have a new video uploaded!
@richardfletcher1971
@richardfletcher1971 Жыл бұрын
Thanks!
@TI4438
@TI4438 2 жыл бұрын
Keep these vids coming.
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
🤙🤙
@911lucy69
@911lucy69 Жыл бұрын
Thank you
@garylanders1470
@garylanders1470 Жыл бұрын
In general I think that you do a great job, but I would think that finishing the cut edges of the corrugation with a primer and rust preventative coating. Thanks for sharing you knowledge and techniques. Gary
@truthpurveyor8298
@truthpurveyor8298 Жыл бұрын
most containers are made of corten steel that when rusted, makes a protective coating
@glennhernandez4366
@glennhernandez4366 Жыл бұрын
Keep it going
@williamcrenshaw9728
@williamcrenshaw9728 2 жыл бұрын
I love this channel
@prettymiami5360
@prettymiami5360 Жыл бұрын
I want one for my restaurant now😍
@gary24752
@gary24752 Жыл бұрын
So what do you do for a fire barrier for the foam insulation in order to meet code requirements?
@munyaradzisibanda5200
@munyaradzisibanda5200 10 ай бұрын
This is amazing
@dgb5820
@dgb5820 2 жыл бұрын
Awesome video never knew there were single use containers, I wonder if these come to Australia
@Doesntmatteratall
@Doesntmatteratall 2 жыл бұрын
Very cool
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Thanks!
@mitubogoogle
@mitubogoogle 2 жыл бұрын
excellent
@Vanderloo5
@Vanderloo5 2 жыл бұрын
I am currently bidding a project with a shipping container modification. Wondering if you had to do all of the modifications to the actual windows and doors prior to install? Or, are there windows and doors available as "shipping container ready"?
@patcarh2980
@patcarh2980 2 жыл бұрын
You made everything look so simple😊Loved the way you explained it. How much do you charge for the container build out?
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Glad I could help! The prices vary depending on the modification and the price of shipping containers and materials. We have a 2D planner site, PlanMyCan.com that you can use to start a container modification.
@simonradowitzky4837
@simonradowitzky4837 Жыл бұрын
Nice! What are you using to drill the holes?
@timothywiley6334
@timothywiley6334 2 жыл бұрын
YES
@mcconn746
@mcconn746 Жыл бұрын
Great job and great video. Thanks. I am trying to talk our band booster club into putting up a second concession stand because we are too slow serving people. A shipping container is certainly an option.
@TheContainerGuyTV
@TheContainerGuyTV Жыл бұрын
Our Kiosk Windows will be perfect for that application
@mcconn746
@mcconn746 Жыл бұрын
@@TheContainerGuyTV I will check that out if there is any interest in doing this. Thanks. I was invited to our booster club's next board meeting Nov 7. We will see how it goes.
@TheContainerGuyTV
@TheContainerGuyTV Жыл бұрын
@@mcconn746 if you need help talking them into it, let me know
@mcconn746
@mcconn746 Жыл бұрын
@@TheContainerGuyTV Thanks.
@MegaBlackLobster
@MegaBlackLobster Жыл бұрын
What is the rattling sound through the whole video?! 🤣 great video tho! It's nice to learn shipping container lingo and seeing the underside of a container! Very helpful and insightful video. Thanks
@TheContainerGuyTV
@TheContainerGuyTV Жыл бұрын
Haha this is our very first video ever shot. It was the mic cable hitting the side of the go pro. We've learned a lot since then 🤦
@lornerogers5178
@lornerogers5178 8 ай бұрын
Question-does the foam separate the interior strut from the inside of the exterior coragated steel wall? Otherwise there is cold bridging from the outside to the inside.
@trademark23
@trademark23 4 ай бұрын
Hey Channing, great video. Do you ship your kits as far away as New Zealand? We like the prospect of being weld free thanks to your advice.
@seanholland3821
@seanholland3821 2 жыл бұрын
I love the outfit kit adapters frames for the vinyl windows? I assume you source them from a speciality supplier?
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Hi Sean, these are Container Modification World window kits. Check out www.containermodificationworld.com. They are also available on Amazon. We too love them. Such a quick and painless install.
@jennrichardson9828
@jennrichardson9828 Жыл бұрын
Just found your channel. What we would like to know is do you sell the containers as well and do you ship anywhere in the US? Also I see 20 ft so far in the videos. Do you have 40 ft?
@sergiosolis4538
@sergiosolis4538 2 жыл бұрын
Good Ole "death wheel" gets it done.
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Best tool for the job
@graham2631
@graham2631 2 жыл бұрын
Try a skil saw with a metal blade you get a lot more control and not as hazardous.
@FGWC-CHRIS
@FGWC-CHRIS 2 жыл бұрын
I think you need a couple more ads... love the product you make very cool process.
@claricezoggyie
@claricezoggyie Жыл бұрын
Do you and your team modify containers for individuals?. Roughly how much is it to modify a container that is functional for the seasons?
@jbman413
@jbman413 2 жыл бұрын
Have you ever tried to use the strut as an electrical conduit? Originally unistrut set them up for that. Don’t know if it is still possible.
@zachall9539
@zachall9539 10 ай бұрын
Can you ship a container once it's all built out like this? Would you be able to haul it safely if it was full of cargo?
@TheContainerGuyTV
@TheContainerGuyTV 9 ай бұрын
This is not meant to be filled with cargo
@dogman490
@dogman490 2 жыл бұрын
Loved the video. So informative. I am struggling to find the vender of the man door kit that you used . Is that info available?😁
@TheContainerGuyTV
@TheContainerGuyTV 2 жыл бұрын
Yeah, the man door kit is not available online for purchase yet. You can contact us at sales@thecontainerguy.ca to purchase the man door. Thanks!
@MA-vm6jl
@MA-vm6jl 2 жыл бұрын
Do you have a video on just the electrical?
@BrianRox
@BrianRox Жыл бұрын
have you considered using a plasma cutter for the window's and door cut outs? would be easier, might be faster. I guess it depends on the person doing it. Just an idea.
@norberto95
@norberto95 Жыл бұрын
I am curious about the interior insulation. What’s the R value on this container?
@maddog19671967
@maddog19671967 11 ай бұрын
Hey there Channing as regards' to the square tubing that you didn't like on the cut outs, you might consider putting some holes in the square tubing and filling it with spray foam from a can, a few smaller holes on the corners will let you know when it is all filled , stop's.. the thermal bridging . I'm from Ireland and was wondering if you have any jobs going as I would love to move there permeant. The fishing rivers there look Amazing. I have loads of experience from building houses to building shipping containers , converting them them to house massive generating power equipment for the likes of google and Banks . I also made them from scratch to specifications for the client. Have been watching your videos and i reckon your the type of guy i would like to work for, i love that type of work . i've always dreamed to live in Canada an ye know what ? IF YE DON'T ASK YE WONT GET, Am i right ? LOL So when can i start ? LOL
@TheContainerGuyTV
@TheContainerGuyTV 11 ай бұрын
The Container Guy Ireland. Back to my roots
@Silhouette_one
@Silhouette_one 11 ай бұрын
Thanks very much for the info! I'm in a sub-tropical humid climate with lows around 40 Fahrenheit and highs around 95 Fahrenheit. A quick online search has recommended for my area to have walls minimum R2 and celling minimum R4. If I can customize the height of my prefabricated container frame, what would be a good height to allow for the floor and celling insulations and still have a spacious feeling?
@TheContainerGuyTV
@TheContainerGuyTV 11 ай бұрын
No such thing as a spacious feeling inside a shipping container. Don't insulate your container for space. Insulate it for your health. Use 2" of closed cell spray foam and steel stud framing. Anything porous will mold and affect your health.
@brianfalls5038
@brianfalls5038 Жыл бұрын
Hey there Channing. Happy New Year to you! I have a question for you. I'm getting into blacksmithing and I've been considering getting a 20' container that I can use for a shop. How much do you guys normally charge for setting up a container? I'm not sure completely what I'm looking for right now but I think I'd want a man door and at least a couple of windows for the container. Also, for right now I am running a gas powered forge but may transition over to a coal forge. Not sure what I'd need for ventilation there but I "am" looking for ideas.
@TheContainerGuyTV
@TheContainerGuyTV Жыл бұрын
Happy New Year Brian! You're obviously handy and could probably tackle the mod yourself with some of our parts and our guidance. I think the T10 exhaust fan with a couple intake dampers for when you're working would suffice. Probably don't need much for ventilation when you're not in there. Depends on where you're located. Send us an email to mods@thecontainerguy.ca if you want to chat more.
@brianfalls5038
@brianfalls5038 Жыл бұрын
@@TheContainerGuyTV Ok. Many thanks! And a happy New Year back atcha!
@stephenlane3961
@stephenlane3961 Жыл бұрын
Someone that is new to this, is the window metal frame a special order or is it something you can order?
@shaiyashock
@shaiyashock 2 жыл бұрын
Why don't you put caulking behind the windows or doors frames to make it more water tight before you rivet or screw?
@billrogers971
@billrogers971 Жыл бұрын
Is the flashing kit for the door just so you can fill it with insulating foam? I want to use a container as a storm shelter, do you have any suggestions for enabling the main end doors to be lockable and openable from the inside?
@TheContainerGuyTV
@TheContainerGuyTV Жыл бұрын
I don't have any good suggestions for that at this time. One day I'll figure it out. It's very difficult to set the thick door seals without the leverage provided by the handles from the outside.
@tysondavis84
@tysondavis84 2 жыл бұрын
Can I get a finished one shipped just exactly like the one in this video. And how much would it cost?
Lakefront Shipping Container Tiny Home Build (with costs)
17:22
The Coyote Lab
Рет қаралды 954 М.
Installing Our Exterior Stud Brackets On Shipping Containers !
22:49
The Container Guy
Рет қаралды 362 М.
Increíble final 😱
00:37
Juan De Dios Pantoja 2
Рет қаралды 89 МЛН
Just try to use a cool gadget 😍
00:33
123 GO! SHORTS
Рет қаралды 83 МЛН
Китайка и Пчелка 4 серия😂😆
00:19
KITAYKA
Рет қаралды 3,7 МЛН
OFF-GRID A/C & Spray Foam Insulation | Shipping Container House
24:35
Ambition Strikes
Рет қаралды 403 М.
The Ultimate Shipping Container Buying Guide - Avoiding SCAMMERS!
15:39
The Container Guy
Рет қаралды 283 М.
Old Shipping Container Converted into New Executive Office
39:57
How We Build a 20' Shipping Container Office - BigSteelBox
3:17
BigSteelBoxTV
Рет қаралды 80 М.
Shipping Container Shaping Bay [Part 6 Venting and Exhaust Fan]
5:39
Bendheim Boards
Рет қаралды 290 М.
Shipping Container Conversion. Insulated Storage.
23:51
Bradshaw Joinery
Рет қаралды 729 М.
Renovating a shipping container for storage
18:48
Torbjörn Åhman
Рет қаралды 668 М.
Pura Pura Keracunan Lagi #shorts
0:16
AKU ELIP
Рет қаралды 17 МЛН
Самый безопасный мотоцикл в мире 🏍️
0:37
ОМЕГА шортс
Рет қаралды 13 МЛН
Профессиональный Точильщик Ножей 😍
0:43
EpicShortsRussia
Рет қаралды 4,4 МЛН