homemade fly cutter

[@erregi_diy8976]

Pazzesco,forse il più bel progetto.Complimenti Rimango sempre affascinato dalla tua precisione. Complimenti

[@thedacchio]

Grazie :)

[@jeffgreenfield7025]

I remember making a fly cutter as one of my first graded projects in high school. Then parallels then 123 blocks.

[@rolandocrisostomo2003]

The good O'le days

[@900stx7]

Nice cutter. Only change i would make would be more sat screws, spaced closer together. It holds better, plus allows you to clamp short pieces of tool steel. You can also extend your inserted cutting further to cut larger resurfaces.

[@kennethtucker9844]

Hi very nice looking flycutter, just one problem though it's left-handed.

[@paultrgnp]

Mate, I am not a machinist and I am not sure if I missed something, but I would feel very vulnerable using your nicely crafted fly-cutter. Please please drill holes into the tool holder so that the set-screws provide an extra degree of physical security instead of relying on the friction between the screws and the flat side of the tool holder. If the tool holder should become loose, it would become a potentially lethal projectile. Otherwise, nice work.

[@pavelsolar86]

Exactly my thoughts!

[@900stx7]

I can't tell you how many times over the years i've used a fly cutter just like this one. The set screws are plenty enough to hold the tool holder in place.

[@allaussietraveller9879]

Yeah you kind of answered your question in the first sentence.

[@johnpiettro4644]

That was my first thought as well. I added my questions on top of the comments before reading your observations. Moreover to me any fly cutter based on the same principle of construction looks dangerous. However they use them all the time...

[@sjv6598]

@paultrgnp there is no need, the set screws will hold it fine

[@ketalix]

careful man...put a little more "oil" for a longer tool life...good job.

[@CUBETechie]

If you use carbide insert tool's you can use lubricant/ cooling emulsion or without but not on off on off.

[@Junavi07]

A very conscientious and meticulous work, as always!

[@billmcgee7]

As a machinist back in the day ! I enjoyed watching the fabrication of the fly cutter ! Noticed as I’m sure many others did the same ! The stud was welded in then turned to clean up ! To my amazement why didn’t he saw extra length and turn the shaft on to the blank ? Other than that it turned out very neat as I see the completion !

[@Adam1nToronto]

I'd guess far less waste material this way, and less wear on the cutting tools.

[@mathewmolk2089]

Great to see sombody just jump in and get the job done. - If +/- 3 degrees is OK, then make it +/- m3 degrees and leave the Sine Bar in the tool box. - If a slot needs to be +/- .010, make it +/- .010 and leave the adjustable parallels next to the Sine Bar. - I think most people on You tube want to show you just how to do extra and unnecessary work. - This thing works like a charm and took 1/4 the time the "right" way would take. GOOD JOB!

[@da0178]

É incredibile, penso che oramai abbiamo abbandonato il livello hobbistico da un bel po' , io lavoro ogni giorno con professionisti che tu surclassi per precisione e pulizia, non é che segua proprio tutti i maker, ma per me sei il numero uno.

[@thedacchio]

grazie :)

[@schrotti1000]

Ein schöner Schlagzahn 😀. Vielleicht noch eine Vertiefung für die Schrauben im Drehmeißel anbringen.

[@klauss9736]

Ein Schweizer ?

[@ironmaker1158]

Semplicemente alta precisione.....👍👏👏👏👏

[@thedacchio]

Grazie :)

[@valeriobonafede4683]

Livello di precisione altissimo... Fantastico.. Se cosi non fosse mi da l'impressione di essere un po pericolosetto.. 👍

[@thedacchio]

premesso che lavorare su queste macchine è da considerarsi sempre pericoloso, ma devo dire che si comporta molto bene, è abbastanza bilanciato e non fa vibrare la macchina quindi direi che è ok

[@valeriobonafede4683]

@@thedacchio infatti si vede che non si muove niente.. Praticamente perfetto. Pensavo a chi ha attrezzature con giochi e flessioni.. Meglio che non lo copino a mio avviso

[@michelemalesardi5025]

Ho scoperto il tuo canale stamattina... Sto recuperando il tempo perso guardando tutti i tuoi lavori ingegnosi. Usavo un utensile simile a quello che hai realizzato quando dovevo fresare le lamelle di rame per costuire elettrodi da elettroerosione. Solo che non aveva un coltello con inserto ma sra una barretta a sezione quadrata in acciaio temprato,che ogni tot minuti di utilizzo andava affilata... Però la finitura era a specchio

[@thedacchio]

si utilizzavi una barretta di hss, va bene uguale anche perche puoi scegliere il tipo di affilatura da fare.

[@bryanbortko2695]

Damn that's nice. I always used fly cutters as a machinist. Totally different cutting aluminum vs steel

[@Etherion195]

What's the benefir of a fly cutter over a normal mill?

[@TalisonElvira]

@@Etherion195 Better surface finish.

[@Etherion195]

@@TalisonElvira thanks.

[@Radio_klest]

Хорошо получилось! Очень практичная оснастка

[@andvaleri]

È sempre un piacere vederti lavorare, grande precisione, complimenti!!!

[@mifistofilus1]

Классная штука получилась а она не вылетит? вроде и зажата не плохо но все же

[@arneminderman3770]

Wow, nice! Thanks, greatings from the netherlands.

[@MARFYMAKER]

Fantastico, ottimo lavoro Lorenzo

[@thedacchio]

Grazie Marcello :) scommetto che non vedi l'ora di prendere una fresa per farne anche tu uno :)

[@MegaZero78]

Grandissimo DACCHIO se vai a comprare un utensile del genere costa un botto, bravo bravo

[@thedacchio]

lo so, infatti la maggior parte delle persone se lo costruiscono :)

[@MadeinPolandChannel]

good job!

[@thedacchio]

thanks bro :)

[@skatewithvanz]

If made in poland gives you a comment its good trust me lol

[@MsALDARI]

PO BEJN SURE THUI AFITOS ç

[@steran50]

Back the front, but just run it backwards. Nice job.

[@brainfornothing]

Very well done ! Now I only need a milling machine, Hehehe ! Thanks for sharing !

[@BV2]

But first I need money

[@Sahilkmr710]

kzbin.info/www/bejne/nYTClWqkma59fMU

[@avramhanovich8900]

רששששששש ש'ה ם של כל רב כ, ב

[@davidwillard7334]

DREAM ! ON ! DREAM ON ! DREAM ON !! DREAM.ON !!

[@Noe_Luciano]

Ottimo lavoro, come del resto tu ci hai abituati a vedere, bravissimo

[@rolandocrisostomo2003]

I do machining and automotive repairs. So i take the used engine oil and use it as cutting oil, its free.

[@VilsonAlba]

Veramente complimenti Lorenzo :) ieri ne ho costruito uno anche io ed è molto simile al tuo… comunque ho dovuto mettere un utensile rovesciato perché con quello dritto la macchina deve girare in senso antiorario e la mia macchina lo fa solo in modalità filettatura dopo aver raggiunto il fine corsa del canotto… bravo ancora :)

[@thedacchio]

anche io ho dovuto mettere la rotazione in M4 ( so che tu mi capisci e sai cosa vuol dire M4 ) dato che l'utensile è sinistro, ma la mia macchina gira in m4 dovrebbe farlo anche la tua...strano

[@j.r.w7636]

Great work but I gotta be honest this thing scares me lol

[@DieZockerZone1]

i wouldnt stay near this, i would hide myself behind a massiv wall

[@sanjaysami4315]

Good work ! Maybe make the music softer so we can hear the machines.

[@pablitojuve88]

Grande Lorè! Ti seguo da quando avevi il codino!

[@thedacchio]

bei tempi Paolo...ahahah

[@LucaLazzaretti]

Ottimo lavoro!Complimenti!Si potrebbe usare anche sul tornio....

[@jacksiscavage6265]

Was waiting to see a fly get cut in half. Lol.

[@riccardomarraccini7153]

Bravo e preciso; come sempre è un piacere vederti lavorare

[@officinahobbistica2.06]

Grande ottimo lavoro, rifinitura professionale

[@hugoa.gonzalezzelaya6116]

Excelente herramienta! Un gran trabajo!!!

[@rogeriovasconcelos90]

Idéias básica e ótimas de um bom profissional, parabéns

[@ambroscustom]

Well build tool, really worth the effort you made.

[@pierluigibeltrame3458]

Sempre molto professionale....complimenti!!!!!

[@thedacchio]

Grazie :)

[@garysushil]

Was good but its very dangerous

[@NonSoloRockTube]

Sempre il numero 1, iscritto da quando suonavo con i Parasitz!

[@thedacchio]

uno dei migliori gruppi mai esistiti a Pianella :)

[@Antonio_NOM]

Video come al solito ben fatto e molto interessanti i contenuti.. the dacchio 6 bravissimo!

[@thedacchio]

Grazie :)

[@zxandr1607]

I don't want to listen to music, I want to listen to the machine!

[@michaelclark2840]

Nice work. Could use an extra set screw. Curious why it's setup to run anti clockwise?

[@melisunnymellchris79]

Looks very nice - but dangerous, you must have a good look and feeling about the rp/m's...

[@marvinweijer9073]

If you know the diameter and what kind of material your tool is. You can calculate the speed en the feed.

[@marvinweijer9073]

And make sure your tool is well balanced

[@MurZZZilla]

Молодец! Сэкономил на фрезе.

[@klauss9736]

Я ненавижу россиян

[@makermadeinitaly6242]

Complimenti!!! bel lavoro...Bravo...!

[@thedacchio]

Grazie :)

[@fadyplady8337]

Good job but very dangerous , break up with speed and penetrate your body

[@tommo033]

Que?

[@Luiansan94]

Gran trabajo. Una pregunta nada más. Cuántos grados de inclinación tiene?

[@NPsportAR]

Caution!! Put camera in inverse angle for look a better and use refrigerant . Good job

[@ГлебНехорошев-ц7ы]

Замечательное приспособление. Всех благ.

[@yvesgosse3979]

Hi, it's a very good job, and a good idea...

[@balkonnaya_tokarka]

Niice job! What is tool installing angle you choosed? I'm thinking about 10-15 degrees, but not sure...

[@maurorasera7016]

Que Excelente idéia, parabéns, vou tentar copia-lo .

[@roccopompa680]

Bravo sempre nelle lavorazioni, cmq per il tornio sarebbe bello un inquadratura dall'alto ciao Lorenzo

[@thedacchio]

ci sto pensando...ma ancora non mi viene in mente una buona idea..

[@cisumevolneblok]

Ever heard of coolant? Great job, by the way!

[@campbellmorrison8540]

I need a fly cutter but had never thought of making one, I love the idea of using an insert tool it but why did you off set the cutting point off from the rotation center?

[@cosmovellucci5506]

Come sempre ottimo lavoro 👍

[@marcellofabbri6292]

Sei un grande veramente bravo i mie complimenti

[@thedacchio]

Grazie :)

[@userwl2850]

Did I miss something? Why did you make it to run in reverse 🤔

[@chrishenning8829]

Same. Wondering if that was intentional, or an ooops.

[@DreamAllianz]

Because of the way his cutting plate is facing, he keeps it in a lathe holder so if he would want it to turn the "right" way his point would be facing upwards

[@davidwillard7334]

It runs in reverse because it's in Reverse

[@danuprasetyo5549]

Nice brothers,i'm school in mechanical engineering

[@bryanbortko2695]

Well you know you should spend a good 5 years hand on. Even if its setting up cnc mills . Practice trig and cad. Get used to 3d mastcam softwear

[@danuprasetyo5549]

Yeah 5 years is a short time and needs full concentration

[@ayhancetin5038]

Talaş sana geliyo ters yapmışsın kardeşim barayı olmazzzz

[@andysbastelwerkstatt7299]

Nice Tool 👍👍👍

[@xno127]

Awesome ,great skills dude

[@lucamalcm1442]

Espectacular 👌excelente rectificadora en plano

[@claudios1983]

Exelente video, acabo de encontrar el canal y es muy bueno, tu laboratorio es muy similar al mio. Saludos desde Argentina!

[@zdrahar8977]

Неплохо но я думаю что купить оправку было б проще))) но руки откуда надо растут! Молодец!!!

[@HernanSDfull]

excelente video!!! saludos desde Argentina!!

[@stuartcox4739]

Nice job! What degree angle did you put on the bottom of the tool please?

[@twotwocold]

Screws are not flush is my only argument, other than that precision crafted 👍🏾

[@oppanheimer]

Bravo beautiful job. What metal did you use?

[@giuseppecolombo4701]

Super lavoro complimenti

[@человек-ж3й8г]

Молодец мужик... Отлично получилось 👍👍👍👍👍

[@PitbullCNC]

Nice video, nice music, nice project. Is the video background music available on KZbin?

[@119407738]

con un taller bien equipado construyes maravillas.

[@fernandoanthony277]

Its nice but the rotation of the cutter or spindle should be clockwise to avoid the chips coming off your side.

[@mafosa8519]

Yup. That’s real nice! Larry

[@davidwillard7334]

With your Lathe ! And Milling Machine ! Already there !! You could have gone !! And Bought !! ONE !!

[@DolphinPain]

That's no fun

[@davidwillard7334]

@@DolphinPain How is making a Mess ! Fun then ?

[@knafis]

I strongly beleive u r doing it hard way if not wrong

[@knafis]

@mrgeorge118 i have an opinion and i beleive i can express that, and i am a mechanic and a machinist , have worked in r&d, so i know what i am talking about, i donot want to disrespect the gentleman who is in making this masterpeice, and the people who know even a little about manufacturing, will definitely understand rather than cursing me

[@allaussietraveller9879]

@@knafis what part are you talking about?

[@wojciechpietrowski1161]

You can also use this to make holes

[@TokaSni]

Salute TheDacchio :-) Lorenzo :-) la mia è molto di più che solo una sorridente e compiaciuta battuta di ammirazione. Se alla fine del video fosse apparsa la scritta: "ed ora, signori, baciatemi il culo! :-P"... beh, non è chiaramente nel tuo stile, ma io l'ho pensato :-D Bravo! Hic ;-)

[@thedacchio]

ahahah grazie!

[@slimthug6675]

This ain't homemade... Homemade is with an impact drill

[@strawsparky33]

If he made it at his house It doesn't matter what tools he used. Its still homemade.

[@yaykruser]

@@strawsparky33 The normal person cant afford those tools, I think it his buissnes workshop or something.

[@slimthug6675]

@@strawsparky33 I was just joking but... If you have a professional work shop at home its not homemade. My mum is an English teacher so I'm quite certain with the play of words.

[@fullmoon6661]

This is such a good camera angle, next time just point the camera to the floor or something.

[@tonycstech]

I dont understand this design. It seems to be very unbalanced. Is it not ?

[@kentuckytrapper780]

Job well done, great info.

[@ProstoMishutka]

Отличная работа)

[@solucoesodontologica.9053]

This is magnific.

[@adofilth]

Good job man!

[@angelwalterbobadilla9430]

Muy bueno, pero lo veo peligroso que pueda escapar, poco agarre con dos tornillos. Debería tener una traba me parece, saludos.

[@elderochoa3234]

Grandiosa idea 👍🏻

[@Cholton222]

Love your videos dude. We're are the NEW ONES? Lol. Keep them coming man be safe

[@FaidaMen]

Wowwwwww non c'è altro da dire!!!!!!

[@thedacchio]

Grazie :)

[@حمزةحمزة-م4ف4ض]

Cool work 👍

[@jamesball7322]

I’ll be making one here soon ,thank ya

[@MOUNTAINEAGLES]

Muy buen trabajo como siempre! Saludos.

[@mcozpda3392]

bravo .. que velocidad huzaste en cortar la pieza en tu drill .. saluti dai messico

[@milevyo]

this guy is using professional tools for his work. event if it was done at home. it can not be classified as a homemade any way well done

[@SafetyBoater]

If you can feed at a fast enough rate, on a shallow pass, you could make some interesting patterns.

[@leoadrian21]

Hello good Job, which steel it's used for the fly cutter? ty

[@juanjosehernandez6625]

Good job, what kind of steel did you use?

[@jamalalghazoune9164]

well done.Excellent work

[@Bigbore3]

Bel lavoro. Che fresa è quella che usi?