Can Capacitor reduce our electricity bill ? Power saver device Real or fake

[@TheElectricalGuy]

Please watch the video carefully and completely before saying that this video is fake, or I am doing misleading. I made a dedicated video for you on how you can select the capacitor size to correct the power factor 👇👇 kzbin.info/www/bejne/Z5SxlpyXbqlofM0

[@agnelodsa788]

Fake news, are you an electrical engineer?

[@teluguelectrotechbysivakum2283]

False video don't believe. Power bill won't effect by using capacitor. Please share only truth.

[@baneesh29]

Then what is power factor?

[@pramodtpn826]

Capacitor value??

[@robertikpeamah3042]

What is the value of the right capacitor?

[@fixingstuff8117]

Remember that each device should be power factor corrected with its own capacitor. Because things are switched on and off in a home. Your refrigirator, tv, bulbs, etc. either switch on and off by themselves or you switch them on and off. Connecting just one big cap into your supply, the cap will draw current when you switch off most of your inductive loads and then waste electricity for you, and save for the municipality.

[@eddcua5481]

Quite true.

[@teluguelectrotechbysivakum2283]

False video

[@janolivier5879]

@@teluguelectrotechbysivakum2283 Maybe not 100% accurate video, but it is very true. Google power factor correction to see for yourself. Most electric equipment with motor has capacitor inside to improve power factor(PF). Drills, blenders, etc. Lawnmower has cap next to motor, called starting cap, but I think it also does PF correction. On big motors you get starting and running caps, the running cap is for PF correction.

[@priyabratroy6573]

Well explained! This should help break the MYTH most video watchers believe to be true. 🙏

[@madanmohanmishra5421]

Capacity of capacitor ?

[@safiudeen]

You are using the same power with improved power factor to calculate current, and then again, you are calculating the power using the calculated current. In this, you will get the same power. Energy meter calculates the power consumption of active power. Theorically, the capacitance load will deal with reactive power. Therefore, there will not be any noticeable change in meeter reading. But improving the power factor will help to reduce the current in the line. This is good for the supplier as the voltage drop will be reduced in the supplying line.

[@vmanstudios]

Does it mean that applying capacitor across the line is good and advisable? And it can reduse bill.

[@davebutler3905]

Now you are getting to the point!

[@hmtechsvc]

@@vmanstudios imho - no, it's a flawed method of deployment in that use case scenario. a parallel capacitor should only be deployed to inductive loads only. that's only a few things (dryer, washer, dishwasher, range hood, ceiling fans, garbage disposal, vacuum cleaner, fridge and central ac). you can't leave the caps on when the load is not on - if you do then you're just wasting electricity. and forget about everything else for caps - lights, toaster, keurig, microwave - those are all resistive loads. it's literally STUPID to think or calculate what cap is needed for an entire house. the point he's not making is that EXISTING capacitors are typically installed with the startup (inrush) current needed to get the inductive loads going and that each power factor's device can (probably) be improved with the addition of ANOTHER capacitor that brings the power factor of the device closer to 1.0 - but again the bigger the load the bigger the savings and the smaller the load the smaller the savings - and you have to make sure the cap is on ONLY WHEN THE INDUCTIVE LOAD IS ON - here's a better video showing it kzbin.info/www/bejne/ioHUiYGCoK-HgK8 - he buys an $18 cap - after years he will start to realize an roi - and this is what most people bitch about "roi" lol - but if everybody was off grid in the middle of montana - those guys would be in the dark anyway lol - anyway - hope this helps you out man - too many ppl don't explain it well enough - again imho

[@robgad2271]

Many homes who already use large motors for devices or air conditioning already have some of these in use in the house active circuit. Imagining an AC Capacitor as an energy saver defies the logic and centuries of use of these devices, if anything they are can be a drag on the system and waste electricity needlessly. But what do I know, I'm only an electrical engineer and educator.

[@brettmoore3194]

If you dont know about phase angle, plus optimizing voltage and current during the same phase angle then you dont know what your talking about

[@priestmugivhela5789]

Go back to that university and ask for your school fees, phase angle is at play... though we are not saving much , but we r saving...

[@brettmoore3194]

You say your a electrical teacher, have you heard about motionless electromagnetic generation... There is almost 33 different concepts based on the same fundamental idea of extracting energy from a magnet

[@rxsyete]

Does NOT save money for the consumer like us ONLY for the power supplier. So yes, will NOT lower our power bills. The engr. and teacher is correct.

[@madgaming6810]

Ok so why The susbstations are usingg capacitor banks? Maximum homes are using capacitors ok.

[@rev.jonathanwint6038]

Depends on the area. I use a UPS and it scans the spikes. Got it bc of the ruined Electronics. My power was spiking 200 and was down to 90.. not a steady 120. So I am paying for the 200 but using only 120 . A Capacitor acting as a Reservoir. So I get a steady 120. PROTECTING MY DEVICES .The UPS also is a back up to let my pc shut down in a full blackout. BUT it saves electricity from those 200 spikes thar hit ever 10 seconds and last about 3 seconds. So I am not waistng the surges but saving then for the dims. That hit every 30 seconds and last about 2 seconds and ether surg or dim can ruin equipment. But I noticed my entire electricity bill went down since using the unit and found out it was cleaning the power to a lesser degree for the entire house not just my labtop unlike a regular surg protector that only stops surges not cleans them with Capacitor. It's primarily designed as a backup for laptop. But it's also cleaning my house house of dirty power. So what I am saying is Normally I would be paying for the 180 sudge but only using 120. This Reduces the Problem. My power grids a EXSTREAM example with is why I Got the UPS. But it saves about 15 bollars a month on my eletric bill.

[@aduedc]

Remember the meter only measures the current (counts current-sec), and assumes value of the PF to be 1 and voltage to be nominal line voltage. So, if you reduce the current your bill will go down. In side a meter there is induction motor in series with your home load, more current it passes through, faster it rotates, and faster it counts.

[@kevinmallory4889]

Is that statement still true considering which side of the meter the cap is installed. ?

[@TexasCanuck]

I am skeptical about this. I am an Electrical Engineer and understand what a capacitor will do in the US. Most modern large load/motor devices already have a Start Capacitor that takes up the initial load surge. Unlike motor loads (HVAC, Well Pump, etc.), most electronic devices have such a slight surge that this won't be worth it. IMO, upgrading old non-LED lighting, fixing insulation, updating windows, and putting timers (WIFI/automated) on some items will save you a lot more money.

[@timothydevries383]

You didn't watch the whole video...

[@voytek3999]

ONLY TRUE IF YOUR AC (Motors!) Is Unbalanced!!! (Power factor...)😮😮😢😅😊❤

[@doyourbest7655]

Adding capacitors to individual motors helps balance the other loads in a plant that has various inductive loads. This better power in the manufacturing plant with single phase and three phase motors/uses. Does not help your electrical bill. That’s why you don’t see it used voluntarily. If you are a big enough inductive load user the power company might give you a discount for installing capicators so they don’t have to on their side of the meter.

[@flagmichael]

@@doyourbest7655 (Retired from a Fortune 100 electric company.) The electricity provider does not care much about power factor in individual residences. Large subdivisions can warrant a capacitor ("cap") bank. Extremely High Voltage substations often have capacitor banks the size of a large shed on insulator stilts.

[@bmainginyabuto4517]

How does updating Windows help reduce power consumption

[@hughleyton693]

By 7 minutes into this video he correctly says there is NO savings using a capacitor for Home electricity, so those devices are a scam. . . . Factories are a different thing though.

[@MervynPartin]

The main reason for a low power factor incurring penalties is because the distribution network has to carry a higher current and thus there are higher heating losses in those cables/ transformers etc. Also, the cables have to be rated for the extra current.

[@eddietee6305]

That reasoning is wrong.

[@sanjyuu2298]

@@eddietee6305 I would be happy to hear your reasoning.

[@eddietee6305]

@@sanjyuu2298 sorry, I meant to say KVA instead of KVARs. Sorry. Commercials buildings are billed for KVAh and not KWH. Domestic homes are only billed KHW.

[@sanjyuu2298]

@@eddietee6305 Thanks for clarification :)

[@eddietee6305]

@@sanjyuu2298 ure welcome.

[@nilangaliyanage3833]

Its a very valuable explanation for those who are blindly ticktoky. your explanation is perfect.great.

[@pauljanssen7594]

It's called phase-shifting it works on AC motors to help motor run more efficiently.

[@justsaying4786]

Seems to me two important qualifications apply here. Firstly the power factor (PF) correction varies depending on the reactive load and that changes as motors, LED lighting and other loads are switched on and off. So the idea that the PF can be corrected by application of a single capacitor is only valid for a given load situation. Putting that aside the other unstated assumption here is that your being billed for the real power component which might be true for domestic households. Large Industrlal users are likely to be charged on total power usage (i.e. apparent power) as a way of discouraging use of high power inducticve loads (i.e. 3 phase motors etc) that do not incorporate some form of PF correction on the equipment.

[@davebutler3905]

You get the picture... PF causes wasted power, so domestic meters charge you for the power you waste. That's why industrial consumers face penalties.

[@justsaying4786]

Should have mentioned there is also a third unstated qualification - all reactive voltages and currents are sinusoidal. This may not always be the case. Some loads (linear power supplies in electrical and electronic equipment, for example ) give rise to current draw with high harmonic content which also contributes to poor PF. A ' capacitor' solution, in this case will only correct the phase relationship between the AC voltage and current and not the harmonic distortion. This is all very case dependent, but serves to highlight again the practical difficulty and limitations of using a single capacitor to correct the PF.

[@flagmichael]

@@davebutler3905 Not at all. Consumer level power factor is aggregated and dealt with at the distribution level. The provider that owns the distribution level lines installs remotely operated cap banks to correct voltage levels, usually from day to night. Domestic meters measure Watt hours, not amp hours or VARS. That may be true outside North America or outside Europe or Australia, but I would be surprised.

[@andysantosa21]

The point is, if you improve power factor, the current will be reduced, so the KWH will be the same [ Volt x Current ↓ x PF ↑]. But there are advantages with reduced current.

[@deepnaik5467]

Which Capacitor value to be used...

[@flagmichael]

None. This video is based on a misunderstanding of how our consumption is measured.

[@ricolimbo3444]

Thanks for information I ask I thing what is the value of capacitor you used for 1000w consumption.

[@manojdivatia]

Superb way of explaining how a capacitor improves POWER Factor and there by improving the Life of the electricity consuming Gadgets like AC , Fan , TV Refrigerator, washing machine etc -

[@hphinn]

Most of the equipment in the house are motor-driven and already have capacitors installed. The biggest culprit is your AC unit. Over the years, the SEER value have improved from less than 4 to greater than 16 and it is mainly due to the improvement to capacitive circuitry.

[@allancleofe7842]

2:02 ibnibibibiiibibbbbbibbbbbj

[@allancleofe7842]

ff

[@thomaswilson9254]

No that is not correct at all

[@hphinn]

@@thomaswilson9254 So follow the video and place the capacitor by the meter?

[@milind9098]

Very nice illustration... Which gives clear idias about voltage, current and power factor..kwh or unit. This video is creating intrest to know more and more electricity. Mohan.(India)

[@dadivenkatarao]

Have you done it real time for home appliance with various loads of appliance.?

[@frank-u9r5d]

I have always thought that by using a capacitor prevents the startup load, which can be ten time the actual load. This may not have much effect on your bill but if you are off grid and run batteries then it can help the longevity of the batteries as the capacitor can release power faster

[@slnrs6816]

Excellent explanation. In market more devices they are selling in the name of reducing electricity bill which has only capacitor inside. You clearly explained that connecting a capacitor across the power supply will not reduce the bill but at the same time will increase the life and efficiency of our house hold appliances which can reduce the maintenance cost of our home appliances in the long run which infact save our money. Thanks once again. KZbin videos are boons nowadays can easily understand any kind of equipment even without basic knowledge also. Little interest only needs to learn about things.

[@vmanstudios]

Are you trying to say our money will be safe if we add the capacitor across to line.

[@flagmichael]

There is no reason to connect a capacitor across the line. We pay for kilowatts, not kilovars (kilo volt-amps reactive). It will not have any effect on the life of appliances; the one factor that will improve the life of your motor operated appliances (air conditioners in particular) is adequate line voltage. Low voltage heats the motor up more than we might think. (Retired after 34 years with a Fortune 100 electric utility.)

[@peternorman2563]

Sounds good and explains the calculations correctly but most homes in the UK are fitted with meters that only read Kwh and therefore have no reactive component to add into the calculation. The big but is when the electricity company's switch you to smart metering as is happening here in the UK. Its another easy way to charge you for what is known as (wattless current) !

[@alanjmasters]

That's interesting. So if I have a poor pf at home best to stay on the old meter.

[@eddietee6305]

You are absolutely right. I'm wondering if the commenters were watching the video. Your home is billed wattage not VA or KVA.

[@kennethhepke3264]

It is distressing to watch TV adverts for these devices. What a swindle. I was an electrical engineer in a large factory. Our main load consisted of polyphase motors and other inductive devices. Around the factory were automatic power factor correction units utilising capacitors. This corrected the power factor......How many houses have exclusively inductive loads? Not many!

[@jensschroder8214]

in Germany the old Ferraris meters only count the active power. The domestic digital meters as well. Expensive measuring systems with capacitive compensation are only available for factories. But connecting a pseudo capacitor to the grid helps the sales of Asian retailers and lighten your wallet.

[@danzelwesingtone7413]

Thanks, by the way what's the rating of the capcitor

[@nimaljayathilaka4718]

Good explanation.very clear. Thanks from Srilanka

[@stevenmoomey2115]

I got to test one of these Capacitor Banks. What the person that loaned me the device didn’t know, was what instruments I had. Assumed just a DM and Amp Clamp. Installed new Double Pole 15 Amp Breaker in Panel wired in Device. With the Breaker off Ran Major Appliances except Clothes Washer, for twenty minutes and took Watt readings. Also Dryer was run on a high heat, non-Auto dry setting. Freezer, Refrigerator and AC Ran at a slightly lower wattage, with the unit connected. Also a large belt driven floor fan Ran at a lower wattage. When I set the Clothes washer so it was heating it’s water it ran at a higher wattage. Next was the Water Heater, our biggest energy hog. It ran at a higher wattage with the Capacitor Bank Connected. Stove/Oven, Dryer Light Bulbs were all higher. Any Inductive load ran higher wattages. This would have resulted in higher electricity bills in my opinion. BTW Fluorescent Lights quieted down, and my immersible aquarium pumps lost there hum, and ran at a lower wattage. My old O Scope showed a smoother Hz Wave.

[@jamessntluanga6504]

Is this can work resistive load for home

[@md.ziaurrahman8603]

Capacitors marketed as power-saving devices for reducing electricity bills are often considered fake or misleading. These devices claim to improve power factor and reduce energy consumption, but their effectiveness is questionable. Power factor correction is typically the responsibility of utility companies, and residential consumers rarely benefit from such devices. It's essential to be cautious when considering these products, as they might not provide the energy savings they promise and could be a waste of money. It's best to focus on proven energy-saving practices like using energy-efficient appliances and reducing unnecessary energy consumption.

[@CoverageAwarenessStudio]

I know a few people who used a Power saving device and it lowered their bill by $400, they had two for a 2000 sq ft home. I said add more and then let us know. so they do work you just have enough of them plugged, you cannot just plug in one and expect oh cool it works because one will not work.

[@flagmichael]

@@CoverageAwarenessStudio Unless you are outside any modern area, I find that impossible to believe. Throughout North America, Europe and Australia power is metered by the watt-hour, not the volt-amps reactive.

[@technicalcontrol6026]

I know this works because i use capacitors with my magnetic self built motors & generators... but what size capacitor uf / voltage do you use?

[@k-mtan1970]

our home meter don't register the KVar... only the active power is registered, so why u need to use cap ??

[@integer9655]

bro are you new on this? 😂

[@timothytamale2600]

Thank you. it's so embarrassing that I didn't understand this for all the years I spent in university as an Electrical Engineer until now regardless of how may long pdfs I read, they all made no sense. Thank you Sir.

[@radnakse_mada]

Don't call yourself electrical engineer

[@sijithloy5894]

The capacitor cannot be connected between the neutral line and the phase line, as you have shown in the diagram.

[@mohdzaidi1631]

Hummm... Hai from Malaysia... Discus about power factor... Every house used electric not same...first thing U must calculate how many capacitor(uf ) to used.if wrong used big size capasitor will be bill more than normally... My house using 15uf, monthly bill decrease 9%-12%

[@HamzahVerster]

Very informative. Another words, ohms law apply. . .

[@govindmalhotra428]

Thanks, Mr Arun , I m agree with you on this issue, but I don't agree with that that a capacitor improves the life of an electrical device because a capacitor ( after with appropriate calculated size ) only reduces the current before the junction point of that equipment and capacitor, and not after the same, so therefore the current of the equipment will be the same as in previous condition, then how can it will save or increase the life of that equipment? Please tell me if I am wrong there,

[@ronrollins381]

You are correct.

[@govindmalhotra428]

@@ronrollins381 Thanks

[@vettalan]

For home please mention the capacity of capacitor (MFD)

[@TheElectricalGuy]

Dear for you I made a dedicated video for you on how you can select the capacitor size to save electricity bill of your home, you can watch that video 👇👇 kzbin.info/www/bejne/Z5SxlpyXbqlofM0

[@anthonywangai]

How do i know if myload is leading or lagging and with what power factor so that i can be able to calculate the microfarad that i need

[@vinznes7792]

Bro, can i take out capacitor in my ceiling fan? What the effect, Motor will slow?

[@SW-hw1mm]

Three phase service ... pf correction for a "Demand Meter" type commercial service to a business? Yes 👍 Single phase service to a residence? Waste of money!

[@jagsank1k2]

EXcellent explaination of PF and why electrivity bill does not reduce even when pf improves.

[@rockskipper5353]

So does a pure sine wave invertor work like a capacitor , other than it doesn't hold a charge ?

[@abc-wi6nd]

You said increase power factor to escape from penalty. How can we improve power factor at home? We use equipments as we have

[@gnanaprakasamn2897]

please tell us how much Kvar or Mfd value capacitor to be added in mains lion .

[@jdlech]

Three things to consider here. 1. this video assumes an "ideal" capacitor. Real world capacitors have leakage current, however small,, that will increase overall consumption. Even if by a tiny amount. 2. I used to add small capacitors to Edison bulbs whenever that socket had a history of blowing bulbs. Wherever the spike happens to come from, a capacitor will help prevent it from burning out the bulb. It may even work on modern LED lights, though they are naturally more resistant to voltage spikes. This saved me a lot of money in replacement light bulbs over the years. 3. capacitors fail over time and use. They can short out and cause a fire. Never bypass a fuse or circuit breaker with a capacitor. And never place one in a location where its failure might ignite nearby material.

[@amithaperera8486]

What’s the capacitor size if and voltage?

[@TheElectricalGuy]

Dear for you I made a dedicated video for you on how you can select the capacitor size to save electricity bill of your home, you can watch that video 👇👇 kzbin.info/www/bejne/Z5SxlpyXbqlofM0

[@TravisCreighton]

Does the improved working of the load by improved PF reduce heat and thus either finish having utlized less energy or save through secondary costs such as air conditioning due to less heat generated?

[@MarcelinoSantos-tn6hj]

what is the value of capacitor to use for 220 volts power supply .pls answer

[@fayaz125]

Thankyou.. What will be value of capacitor....or how many MFD.. AND MAXMIUM VOLTAGE.. OK

[@TheElectricalGuy]

Dear for you I made a dedicated video for you on how you can select the capacitor size to save electricity bill of your home, you can watch that video 👇👇 kzbin.info/www/bejne/Z5SxlpyXbqlofM0

[@davethemmp]

Most countries like Canada and USA don’t charge for poor power factor in residential only in Industrial this is where it really matters

[@AndrewChua-v1g]

Thank you for the elaborate and useful explanation.

[@SuperSheikimran]

is it possible to use a microwave capaciter for this

[@sanavinoya8616]

What of capasitor needed ,what voltage capasitor sir?

[@isidrodeguzmanjr8105]

May i know the value of the capacitor,,,thanks

[@TheElectricalGuy]

Dear for you I made a dedicated video for you on how you can select the capacitor size to save electricity bill of your home, you can watch that video 👇👇 kzbin.info/www/bejne/Z5SxlpyXbqlofM0

[@Narbisarks1]

What is the size of the capacitor normally?

[@didioentoro7575]

Mr. Electrical Guy - if I may suggest, you need to add an information about the advantage of using capacitor is increasing the load - if uses full inductive load at home for example-.

[@vmanstudios]

How do i use inductive load to reduce bill

[@Lb08186]

Hello, Please inform Single Face, Corrent , E,H, in House, What types of Capacitor, Voltage Fix Give Details,

[@NengiDappa]

Which type of capacitor and what is rate of the Capacitor?

[@georgiojansen7758]

does it work on smart digital meters

[@alexanderletranca8284]

Sir how many microparads can we use 1000 watts load in your house

[@TheElectricalGuy]

Dear for you I made a dedicated video for you on how you can select the capacitor size to save electricity bill of your home, you can watch that video 👇👇 kzbin.info/www/bejne/Z5SxlpyXbqlofM0

[@chrislundberg1]

Might help with power surge at power on and then settle to normal other, like motors will zap 1000 watts and settle to 500 watts. Doesn't seem to be enough help to make a bill difference.

[@debojyotiroy7150]

Well, all said and done. But what should be the capacity (mf) of the capacitor ? For how much current (Amp) ?

[@IndianArmy-wr5pd]

Is this safe in usage of below 200 unit utilization in house

[@unnikrishnanmullassery9651]

Can you please explain the same as for three face connection

[@VeritasPraevalebit]

This is correct. The meter does not charge you for inductive or capacitive load. But these loads will cause losses in the power grid transmission lines. Fluorescent tube lighting fixtures contain a current limiting inductor and this usually is balanced by a capacitor of appropriate size. Still, the tube would work just fine even without the capacitor.

[@flamingo5900]

No. Indian meters charge depending on KVA.

[@VeritasPraevalebit]

@@flamingo5900 This may apply to commercial but probably not to private users. Even if it does, a single capacitor would not be of much use. Instead each inductive load would need its own phase compensation capacitor, just as is done on fluorescent tube lights.

[@flamingo5900]

@@VeritasPraevalebit What you say is right. Compensating capacitor should be on only when the device is on. There is no pf correction capacitor in fluorescent lamps.

[@flamingo5900]

@@VeritasPraevalebit In India different rules are there for different states.

[@deang5622]

The old mechanical kWh meters with a spinning disc only measured real power and could not measure apparent power. However with the introduction of smart meters in some countries, they do have the capability to measure apparent power, and even in a residential setting. In the UK they haven't activated that capability yet. Apparent power is rarely measured in residential properties, and most often only done in commercial/industrial properties. One typical approach is to set a threshold for the power factor and make a charge to the industrial/commercial customer when the power factor goes below the threshold. This generally tends to act as an incentive to the industrial customer to adopt power factor correction techniques and devices. Too many customers with too low a power factor imposes demands on the infrastructure which the power company (or distribution network operator) incurs costs to provide. So to prevent them having to upgrade the network at huge cost, they discourage low power factors.

[@noelbenito-e8v]

how many volts or amperes of capacitor should be use? tnx

[@TheElectricalGuy]

Dear for you I made a dedicated video for you on how you can select the capacitor size to save electricity bill of your home, you can watch that video 👇👇 kzbin.info/www/bejne/Z5SxlpyXbqlofM0

[@kimkeoelectrical]

Very Good idea thank you for your video

[@Ukthorncarver]

The Answer is BIG YES. Resonant frequency is the Key.

[@flagmichael]

The Answer is a BIG NO in most of the world.

[@Ukthorncarver]

And why is that if I may ask you?

[@brianbloom1799]

Well what size capacitor do I need and were would I buy one

[@frankhaydon658]

would a capicitor in front of the load reduce power surge and reduce the " demand charge" by the utility compandy? they charge up to 3 times the base rate for demand usauge. thank you.

[@robertorebagay3322]

What kind of capacitor will use to our house?

[@harshalvyas3404]

Kindly share the capacitor details for new home

[@teslapark3406]

Good job, now explain how those LED light bulbs actually save money for the same amount of light.

[@dannymajorenos5730]

how much is the value of capacitor

[@TheElectricalGuy]

Dear for you I made a dedicated video for you on how you can select the capacitor size to save electricity bill of your home, you can watch that video 👇👇 kzbin.info/www/bejne/Z5SxlpyXbqlofM0

[@ramchanderrao67]

Which capacity of capacitor to be conect for home

[@naakiemeshach7873]

How do I choose capacitor for my home based on size and type?

[@rchn9953]

It's not the p.f aspect. The harmonics and transients contribute to parasitic current consumption. Capacitors partly reduce harmonics and transients, so the loads produce less harmonic currents. Some digital meters are not calibrated for harmonics and may excessively render kWH. Besides cost-saving: 1) equipment will last longer. 2) better health due to reduced harmonic electric and magnetic fields. For these benefits, the capacitors are installed just before the fuse box.

[@planecrazyish]

Good video. Well explained 👏👏👏👏👏👏👍

[@joshuacherian6718]

Good presentation.

[@KrishanKumar-hv8fu]

what will be the capacitor value for 20A current load

[@gvkrishna383]

For industries, discoms billing on KVAH meter values. So if u don't maintain PF, ur bill will be little bit more when u compare with when u maintain PF as unity. Thats why in industries, we always try to maintain unity PF. If u maintain unity PF, the stress on cables will reduced

[@lakpriyadil]

Thanks brother, you explained it very well and simple

[@amarcool6086]

Which capsity capasitor need to inset

[@khalidsagmani6456]

Unlike the battery, a capacitor is a circuit component that temporarily stores electrical energy through distributing charged particles on (generally two) plates to create a potential difference. A capacitor can take a shorter time than a battery to charge up and it can release all the energy very quickly.

[@alexanderv.k1696]

This capacitor device is useful if the house has several motors running 24 hrs 365 days like in a factory. If not, the power bill increases abnormally, at least by 20-30%

[@vmanstudios]

Can a motor safe bill.

[@soy1194]

How many uF capacitor need?

[@manojkumar-mc3zw]

then reciving end voltage will increase and ferranti effect will occur

[@Lacaille8760]

Maybe this will work when grid consists of mainly of air hanging conduits. (rural areas) But if cables are pulled as ground cables(urban areas), the opposite is often the case.

[@rk_bhartiya]

Nothing to do with type of input feeder

[@michaelsalunga8889]

what will be the wattage or microfarad to be used in the capacitor?

[@Abdelrahman-Eltaweel.1st]

شكراً لك أخي الكريم على هذا المجهود الرائع جدا جدا

[@ansarihaseeb3911]

Please suggest me capacitor ratting of my connecting load 22 watt led light 20nos. Fan ...4Nos. 1Hp water pump ...1Nos

[@gerritbrink3430]

Hello Sir, I do have a capacitor 35 uF nom. spanning 1400 volt, is these need to install?

[@TheElectricalGuy]

Capacitor value will depend on power factor require for improving, i will make a video on it soon

[@eddcua5481]

How do you determine how "large" a capacitor should be added to the line? Some Electricity suppliers claim they only charge for "Real" power, is this true?

[@TheElectricalGuy]

Dear for you I made a dedicated video for you on how you can select the capacitor size to save electricity bill of your home, you can watch that video 👇👇 kzbin.info/www/bejne/Z5SxlpyXbqlofM0

[@naturetruth5218]

What this video said is true. It all depends on how the utility company charge: Real power consumption or supply power. In residential, its usually charge on real power consumption, that's why installing any PF improving capacitor device will not help save your bill but only for utility company. Which is why i never install any PF improving devices for my home, and discourage non commercial buildings like schools to install such devices as they also consume extra power. But an improved PF does help prolong the lifespan of your supply lines and some devices as less current is required to do the same jobs thus less deterioration rate. It also help old induction motors without PF corrector to run more efficiently. Its usually in commercial and industrial area that utility company imposes a penalty for poor PF to force them improve their PF efficiency, esp for those consuming large power using inductor motors. I was assigned a project to improve PF for a hotel during my university industrial attachment, learning from utility supplying professional engineer. It did cut the large utility bill significantly after improving the PF.

[@flagmichael]

In every civilized country I know of, electricity is sold by the kWh. It is the responsibility of the provider to deal with power factor. Most of that is done at the distribution level, with some at the transmission (the power lines we see a mile away) level. Generally, distribution and transmission level cap banks are remotely controlled based on the line voltage.

[@markarca6360]

In fact, there is a home TV shopping channel here in the Philippines that marketed a power saver device called "Power Star" in the 2000s. This is exactly how it works.

[@TheElectricalGuy]

they are just selling a product, which doesn't work

[@markarca6360]

@TheElectricalGuy In my opinion it is just sales talk.

[@hosraiyan]

Good video sir,always your explaination understable and clear,Thanks.

[@pierrelombaard820]

I only read some comments afterwards they explained their tests with equipment somtimes good sometimes bad worse A powfactor not equal to 1 will cost extra. Lagging ( motors) or leading ( capacitive load, say a capacitor bank ) A factor lagging more than than 0.6 say 0.55 wil let the meter reverse There is no way that you combined use is as bad as 0.9. so 0.6 is worst case scenario Geyser and stoves and heating equipment use the most electricity, at a powerfactor of 1 Only motor devises ( small. 250 watt excetra, example ) Fridges, pumps an fans that is driven by motors will affect the power factor negatively ( but they are small devices ) Called lagging power factor But not.at a rate as bad as 0.8 combined If you want to install capacitors on those motors you can, but as close to the motor as possible, when they run to take the powerfactor closer to 1.0 But you can not use a single capacitor bank If the motors are not running You pay for the leading factor fault wich is just as bad In factory's a system that use synchronous machines is used to correct the factory supply ( use ) powefactor to reduse the bill

[@supersai1919]

Excelentttttt Bro. Thank you very much for your explanation....

[@subratasen6205]

How do you stabilize supply voltage during hot summer ???

[@benjaminandati6323]

Which type of capasitor how many urf good video sir

[@didioentoro7575]

AC type capacitor is needed and the value of capacitor is depend on the inductive load. Inductive loads are transformers and motors inside the equipment...e.g. Tube Lights, water pump or any kind of pump, freezer, refrigerator etc.

[@TheElectricalGuy]

Dear for you I made a dedicated video for you on how you can select the capacitor size to save electricity bill of your home, you can watch that video 👇👇 kzbin.info/www/bejne/Z5SxlpyXbqlofM0

[@marchsi6712]

Do you know what the law of conservation of energy is?

[@dionquilaton1812]

What uf capacitor exactly use pleas I need your answer