Ground Rod Explained

  Рет қаралды 1,355,262

The Engineering Mindset

The Engineering Mindset

Күн бұрын

Пікірлер: 524
@EngineeringMindset
@EngineeringMindset 3 жыл бұрын
*These videos take a long time to make* if you would like to buy Paul a coffee to say thanks, link below: ☕ PayPal: www.paypal.me/TheEngineerinMindset Channel membership: kzbin.info/door/k0fGHsCEzGig-rSzkfCjMwjoin Patreon: www.patreon.com/theengineeringmindset
@JoshBasculez
@JoshBasculez 3 жыл бұрын
Do you any solution to my problem. In my place there is frequent high voltage (240v+). Is there anything i can do to maintain the 220V? We are using 220v in my place.
@isroshashidhar
@isroshashidhar 3 жыл бұрын
What are the effects when no grounding used (both system and protection grounding))?
@EngineeringMindset
@EngineeringMindset Жыл бұрын
Check the new *SUB PANEL EXPLAINED* ➡️ video kzbin.info/www/bejne/hIa2f5RjbK2Ymdk
@EngineeringMindset
@EngineeringMindset Жыл бұрын
Check the new *SUB PANEL EXPLAINED* ➡️ video kzbin.info/www/bejne/hIa2f5RjbK2Ymdk
@ryanstubbs3211
@ryanstubbs3211 3 жыл бұрын
In 2 minutes, you just explained what would take Mike Holt 3 HOURS - and I understood you better. Nice work!
@rickpina5000
@rickpina5000 3 жыл бұрын
You are wrong sir
@danschuster5187
@danschuster5187 3 жыл бұрын
Yeah that talks about his boat n skies then more bla bla
@adfadgaqgv
@adfadgaqgv 3 жыл бұрын
This guy wasn't busy thanking Jesus and having a prayer circle before explaining
@tfun101
@tfun101 3 жыл бұрын
Soooo true lol 🤣...love mike holt though!
@beachstreet5970
@beachstreet5970 3 жыл бұрын
Wow so true. I wanted to like him, because he attempts to explain the NEC, but he just goes on and on without clear explanations and loves to hear himself talk.
@lognum4155
@lognum4155 3 жыл бұрын
Electrical engineer here, I worked with electrical engineer colleagues who had way more experience than me and they actually thought the ground rod is for ground faults, I argued with them about this and they wouldn't even believe me and thought I was crazy lol. FYI, electricity takes ALL paths, not just the least resistance. What I mean about ALL paths is all parallel paths, however the path of least resistance is where most of the current will go to. Grounding and bonding are totally different things
@KM-un8ir
@KM-un8ir 3 жыл бұрын
I am not an electrical engineer, but what you are saying sounds logical to me.
@SoloRenegade
@SoloRenegade 3 жыл бұрын
I work in the super computer industry as a Mechanical Engineer, and having to explain differences in Neutral, Ground, and Bonding to other engineers is something that happens often.
@ashchbkv6965
@ashchbkv6965 3 жыл бұрын
And our lives depend on your engineer colleagues. What's wrong with the education system?
@lanang_solobalapan
@lanang_solobalapan 3 жыл бұрын
Same here. In my university, many people including some of the professors thought that a ground fault could be "magically fixed" just by using a ground rod alone. When i told them that a ground should be connected together with neutral at the main panel in order to trip the MCB, they confidently told me i was wrong and i believe that they must think that i was stupid.
@lognum4155
@lognum4155 3 жыл бұрын
@@ashchbkv6965 Grounding and bonding is not taught in schools let alone MEP engineering. MEP engineering is something you can only learn by actually going into the industry and be trained by a mentor and doing your own research. Theory and knowledge from school helps and will accelerate your learning.
@robertgaines-tulsa
@robertgaines-tulsa 3 жыл бұрын
Electricity will dump most of the current on the path of least resistance. It will still trickle some of the current on the path of high resistance. It's like a voltage divider. Electricity will go wherever it can. It just will put different amounts of current on each path depending on the path's resistance.
@reshpeck
@reshpeck 3 жыл бұрын
That's only of the path of least resistance cannot carry the total voltage produced. Imagine a very narrow water pipe that branches off from a very wide diameter pipe. If the water flowing through the pipe does not exceed its maximum capacity then no significant amount of the water is going to travel by way of the smaller branch
@invitapriore
@invitapriore 3 жыл бұрын
​@@reshpeck Wrong, and dangerously so. Current will flow through every branch in a parallel circuit in inverse proportion to the resistance along that branch, because the voltage at the head of each branch is the same. There's no such thing as a conductor that can't carry a certain voltage -- either its power rating is sufficient to carry the current going through it, or it fails and creates an open circuit.
@mikemazzantini6397
@mikemazzantini6397 3 жыл бұрын
@@reshpeck That's not correct. If you have two ground paths, 1 is 1 Ohm and the other is 50,000 Ohm. The 50,000 will still see some current, just extremely small amounts...as stated above, it's a current divider. Also stating that something cannot carry the total voltage makes no sense. I regularly put 1,000,000+ V on 14 gauge wire.
@kingleonidas4296
@kingleonidas4296 3 жыл бұрын
@@mikemazzantini6397 makes sense. I have dealt with leaking voltage on a spark plug wire but the cylinder still got its voltage for spark.
@altuber99_athlete
@altuber99_athlete 3 жыл бұрын
It is a current divider.
@tihspidtherekciltilc5469
@tihspidtherekciltilc5469 3 жыл бұрын
I was working as an apprentice for a retired electrician that ran a power plant so he knew his craft well when a friend from the local electric company called because they couldn't figure out why people were getting shocked climbing out of the swimming pools on that particular street. These were newly built beach houses that all had swimming pools and all met code with every stage inspected by another retired electrician that knew his craft. The problem was all these houses had two 200 amp panels with constant high loads during the day and the street was fed from one phase. I can't explain the hows and whys as I'm not a licensed electrician but when the power company ran another phase and kept the loads as balanced as they could the problem went away. Apologies for the book.
@tedlahm5740
@tedlahm5740 3 жыл бұрын
Paul: As usual clear concise information. You have taught me very much over the three (3) years, INCLUDING this information in previous lessons. Once again, Thank you.
@arttujarvinen568
@arttujarvinen568 3 жыл бұрын
I think it's important to explain the differences between a TN, TT and IT grounding system in a video like this
@jessenester1760
@jessenester1760 2 жыл бұрын
I second the motion! Nice job on explaining the practical application of a ground rod. True that so many uneducated individuals falsely think it provides and kind of protection against ground faults.Neutral bonding so that electrical currents can get back to the source is the proper means of clearing a fault by allowing the short to trip a breaker.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@itzamia
@itzamia 5 ай бұрын
Cool explanation. I was a Contractor for AT&T back in 2010, and in Florida I went throughout the State and upgraded their ground wires replacing the smaller copper ground wires with 6 foot copper rods. This was around the time they were upgrading to Fiber Services.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@linggiman
@linggiman 3 жыл бұрын
you are the best channel for electrical power system graduates
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@benchociej2435
@benchociej2435 3 жыл бұрын
Glad to see such a clear explanation about how fault current isn't significantly handled by ground rods. Too many people misunderstand this. I remember a forum post about a guy installing a hot tub using two conductor ungrounded cable and just driving a local ground rod at the tub... He could use a pointer to this video.
@zhinonghuang6679
@zhinonghuang6679 3 жыл бұрын
People still do that for cooking range. Two 40a wires only with one cooper wire go to ground.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@shamrockshore6308
@shamrockshore6308 Жыл бұрын
This diagram depicts a TNCS system (Terra Neutral Combined Separate Supply), and the main reason for the ground rod, is to prevent injury when there's a loss of neutral between the meter and supply transformer.
@IbrahimGulraiz
@IbrahimGulraiz Жыл бұрын
I think your comment should be on the top, since this is point I was missing
@thomasdalton1508
@thomasdalton1508 Ай бұрын
That's certainly my understanding. The reference to lightning strikes in the video seems like a red herring to me. The electricity from the strike can flow to the ground rod at the transformer just as easily (probably more easily) as it can to your own ground rod if both are connected.
@joshuadelisle
@joshuadelisle 3 жыл бұрын
What about using a ground rod to take away high frequency noise. For example using one to protect the driving electronics of a CNC plasma table from the HF of the plasma torch?
@edmondlau511
@edmondlau511 Жыл бұрын
For the minds like mine that aren’t scientific, concepts like this are extremely complicated. Huge shout out of appreciation to those of you who are STEM.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@IseeSpiders
@IseeSpiders 3 жыл бұрын
This is true for the grounding system pictured (TNCS?), but I think for a TT earthed system it IS the fault path. Restiance is still high which is why residual current/ground fault circuit breakers are needed.
@Mr.Leeroy
@Mr.Leeroy 3 жыл бұрын
Do they even have TN/TT classification in Americas?
@nirodper
@nirodper 3 жыл бұрын
saw an air conditioner flow 8 amps through earth @ 180v (from the 230v supply), that's around 6 ohms impedance (TT). The neutral fuse had blown and the wires had melted, shorting the earth cable to the neutral. The compressor started failing but god knows for how long it ran like that
@rokiedecentra9656
@rokiedecentra9656 3 жыл бұрын
This always confused me, this was genuinely useful!
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@bodhiforest401
@bodhiforest401 Жыл бұрын
This channel is brilliant ! thank you for your hard work and help, I am currently binging them all
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@antonarasanastasopoulos3482
@antonarasanastasopoulos3482 3 жыл бұрын
I've seen all your videos and all of them are so educational..make a video about grounding a house or a building ...the difference on grounding systems etc..great great job for those videos man. 🔌🔌
@SimplyJoshinYa
@SimplyJoshinYa 3 жыл бұрын
Brief and perfectly explained like always.
@ahmedfayez4596
@ahmedfayez4596 3 жыл бұрын
Sir your channel is the best channel ever
@showeddie
@showeddie 3 жыл бұрын
This channel is pure gold. Thanks!
@gus473
@gus473 3 жыл бұрын
👍🏼 Recently installed one for a portable generator to be used for emergency power in an outage. 😎✌🏼
@andycrask3531
@andycrask3531 3 жыл бұрын
In the UK some properties use them as ground as the supplier is not obliged to provide one. It's called a TT system
@Mr.Leeroy
@Mr.Leeroy 3 жыл бұрын
There are much higher requirements for resistance of such grounding device though, you have to test it to make sure there will be enough current to trip the breaker as well as to not create voltage divider with middle point higher than some specific value.
@spelunkerd
@spelunkerd 3 жыл бұрын
Good point. I had thought these systems were largely used in remote locations because of higher cost for wire. However I since learned that with RCD/GFCI protection, TT grounding is safe and also less prone to EM interference from other devices on the line. I'm told that TT grounding is common in Japan.
@andycrask3531
@andycrask3531 3 жыл бұрын
@@Mr.Leeroy Yes that is correct I was just keeping simple, In a past life I used to do ECIRs and occasionally had TT installations in rural areas and would pray for acceptable results😂
@QuaabQueb
@QuaabQueb 3 жыл бұрын
Great simple explanation to wake people up to the fact that "electricity goes ground" is false and incorrect. I encourage everyone to look at Mike Holt's videos to get an in-depth knowledge of grounding. In essence the "ground wire" is there to clear a fault in an over current condition which sets the circuit breaker. The ground rod (or metal water pipe) it self is there to dissipate a high frequency, high energy DC pulse to the earth which is induced on all metallic parts in a building when lightning strike occurs near by.
@briankewber8233
@briankewber8233 3 жыл бұрын
Great
@mrrogers4591
@mrrogers4591 3 жыл бұрын
Ground wire is to protect to from metal boxes, enclosures, cases, etc from being energized and ready to shock/kill someone. The ground wire is for protection of people. GFCI does a similar thing but measures the current path and trips at very low current going through ground or a person.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@nithishwarm880
@nithishwarm880 3 жыл бұрын
i really enjoy ur short video, nice work :)
@nithishwarm880
@nithishwarm880 3 жыл бұрын
future video idea: tesla coil
@steveperry1344
@steveperry1344 3 жыл бұрын
i was a lineman for the local municipal power company for 40 yrs and we put in a lot of ground rods.
@shockcoach
@shockcoach 3 жыл бұрын
No you don’t, the apprentice does. 😉
@steveperry1344
@steveperry1344 3 жыл бұрын
@@shockcoach yes, if i had one to do it, but lineman had to do it too.
@steveperry1344
@steveperry1344 3 жыл бұрын
@@shockcoach one time we had a big bunch of them stolen from our yard by some copper hounds but they were only 8 ft. long copper clad rods. they took about 100. friggin clowns.
@AuDap
@AuDap 3 жыл бұрын
Dear author! Thank's a lot for this video! Good luck to you!
@fritzmiller9792
@fritzmiller9792 Жыл бұрын
While a lightening strike is absolutely made much more manageable and safer by ground rods ,there is another vital function of ground rods taking place continuously and is arguably equally as important. Grounding maintains an equipotential between structures and power lines as a counter to induced voltage from power lines AND from neutral/center tap drift created by unbalanced loads. This second function of a good inter-system ground is worth explaining too. That was an excellent explanation. I might also add that in tight rural and city areas the multiple paths to ground can be of such low impedance (metal sewer and water systems and several other possibilities) that the returning neutral current will split and be shared between the neutral service conductor and the building/neighborhood total ground paths. I have measured it and it is actually very common for a significant amount of Return/Neutral Current to use an excellent groundpath back to the Utility Source.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@frederickwentz4729
@frederickwentz4729 3 жыл бұрын
So a friend of mine wanted to put lights in some of the palm trees around his property 3 acres ran wiring to the trees so we could use the maximum amount of wire with the least amount purchase twisted all three wires in the Romax together. Then ran a neutral from the light down the palm tree and into the ground with a 6 foot piece of rebar. This worked very well for 30 years with no adverse effects.
@wearsjorge55
@wearsjorge55 2 жыл бұрын
It would certainly work, not sure if electrical meters are done differently elsewhere but without a neutral back to the meter I think your friend wouldn't be paying for the juice to power those lights?
@bamaslamma1003
@bamaslamma1003 Жыл бұрын
The meter is in the hot wires, not the neutral. The neutral passes straight through the meter base to the main panel.
@bigdavexx1
@bigdavexx1 Жыл бұрын
If I'm understanding this right, your friend would have been paying to slightly heat the earth between the rebar and his meter.
@paragjh284
@paragjh284 3 жыл бұрын
This explanation shattered the myth I have from my childhood ❤️
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@user-eh3qz4zv1o
@user-eh3qz4zv1o 3 жыл бұрын
Great simple understanding, Thank you!
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@MichaelSmith-gl4rf
@MichaelSmith-gl4rf 10 ай бұрын
If the neutral and grounding bar is connected are connected to ground then how does landing a hot wire on the ground rod have only the path of high resistance through the ground rods and not through the grounding conductor through the transformer
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@theforcefor
@theforcefor 3 жыл бұрын
Allways to the point, thank you for your work :)
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@justwhy7633
@justwhy7633 3 жыл бұрын
This is a kind of video I'm not looking for but i need it.
@geraldarcuri9307
@geraldarcuri9307 3 жыл бұрын
I love these videos, and especially the illustrations. However, I find the illustration of alternating current to be highly distracting, like flashing neon lights. A better approach would be to slow the motion down a bit, and trace the current flow incrementally through the circuit. Perhaps stop-motion occasionally could be used to give the viewer a chance to absorb all the visual and verbal inputs. There's just too much going on simultaneously. In addition, I would suggest that the point at which the ground fault is occurring be emphasized by enlarging that area, or highlighting it, or having an arrow point to it, so that it remains a fixed visual reference against which the various current flows can more easily be observed.
@IceBergGeo
@IceBergGeo 3 жыл бұрын
You can always pause the video. Or rewind, or even play it at half speed, or slower. People will watch it twice if they are interested and want to learn more, as the further you come along, the more the information you've just been exposed to makes sense. Just rewatch it.
@dare-er7sw
@dare-er7sw 3 жыл бұрын
AC doesn't flow just forward in a linear fashion. It alternates back and forth in a wire.
@waytospergtherebro
@waytospergtherebro 2 жыл бұрын
Jesus Christ shut up.
@WW-hr1hd
@WW-hr1hd Жыл бұрын
The idea of highlighting the "head" of the "flashing current snake" is a great idea.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@jetroompoc3736
@jetroompoc3736 3 жыл бұрын
Thank you.. And it's good because it's short video.
@weavercattleco
@weavercattleco Жыл бұрын
Having just re-installed a new meter base and added a exterior 200 amp breaker panel to meet current NEC code due to a faulty meter that seemed hell bent on setting the side of my house on fire, they will make you install (2) 5/8 x 8ft ground electrodes at least 6 ft apart and the #4 ground wire is to be installed in one continuous run into the main service panel for low impedance purposes. Don't forget your antioxidant paste for the 4/0 & 2/0 aluminum cables 😉 My house was built from scratch during the late 70's so things have changed a bit code wise since then like separating the neutrals and grounds on their own bus bars. Honestly, I don't really see the point of that since the neutral and grounding (safety neutral) wires are linked to the center-tap of the transformer. It looks a little neater, that's all I can say. I was on generator power for 11 days waiting for the parts to arrive for the install. Wasn't going to let some local electrician price gouge me for $500 - $1,000 to install something that took less than a day. Passed my electrical inspection with ease which cost me $125 which wasn't to bad considering. I also now have a spare meter box and breaker panel in my shop just in case something like this ever happens again so I'm able to strip the guts out of the old box and make the repair in less than an hour 😊 As for the grounding rods, most people don't know that for the most part they are really for lightning and static build-up. Now the exception to this is a fence charger which electrifies fence and when touched finds it's way back to the charger via a grounding rod. The more grounding electrodes you install the more powerful a shock they can deliver which is what keeps livestock from escaping 😜
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@GooogleGoglee
@GooogleGoglee 10 ай бұрын
Never explained better. However this explains also why the European system is safer in case a hot wire connect to the ground, they have a "life switch" set to 30mA that would trigger the breaker and interrupt the power from the source 👍🏻
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@wfemp_4730
@wfemp_4730 3 жыл бұрын
Saying "electricity always wants to return to its source" and that "the source of lightning is essentially the Earth" is not only confusing but not totally accurate.
@tedlahm5740
@tedlahm5740 3 жыл бұрын
Sounds accurate to us.
@wfemp_4730
@wfemp_4730 3 жыл бұрын
@@tedlahm5740 I prefer more accurate information, especially from an engineering channel. But you do you.
@altuber99_athlete
@altuber99_athlete 3 жыл бұрын
Correct. I don’t think that’s the reason. It’s because the lightning deposits charged particles on the bare (not insulated) wires of the distribution line when the lightning strikes them. Like charges repel. Also, the Earth is neutrally charged, as in having zero net charge, meaning it doesn't attract nor repel charges on its own. Therefore, the additional charges in the wires repel each other. But since there is a path for the Earth ground through the ground rod, the excess charges can and thus will flow through that path.
@tedlahm5740
@tedlahm5740 3 жыл бұрын
@@jimhabsfan Thank you. And a lightning rod does not catch lightning.
@TheDude-lr6mb
@TheDude-lr6mb 3 жыл бұрын
Totally agreed. As a physics professor I've got triggered by those statements.
@alexegus71
@alexegus71 3 жыл бұрын
I'm gonna be studying this groundbreaking video for the next 20 years
@VB-yc7cn
@VB-yc7cn 3 жыл бұрын
Finally!! Excellent video my friend
@jamess1787
@jamess1787 3 жыл бұрын
I just whacked in a ground rod last week, perfect timing :D
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@solewalk
@solewalk 2 жыл бұрын
This is a gem.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@liberaltears1714
@liberaltears1714 3 жыл бұрын
I dug up a raised flower bed and uncovered my grounding rod. I should sledgehammer it farther down to cover it back up, correct?
@mrugendra
@mrugendra 3 жыл бұрын
Hi. Thank you for the wonderful explainers you have. Do you have an explainer for preventing house fires because of lightening strikes?
@EngineeringMindset
@EngineeringMindset 3 жыл бұрын
Not currently, good idea though
@mrugendra
@mrugendra 3 жыл бұрын
@@EngineeringMindset I have been trying to gather some good information about this topic. But have not been successful so far.
@gus473
@gus473 3 жыл бұрын
@@EngineeringMindset ⚡"Currently" -- 😅👍🏼 Nice one, Paul! 😎✌🏼
@johnkreno2488
@johnkreno2488 3 жыл бұрын
This guy knows his stuff
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@slazerlombardi
@slazerlombardi 3 жыл бұрын
Thank you deep-heartedly!
@JasenRaser
@JasenRaser 7 ай бұрын
The fact that the GFCI picks up the parallel path saves our lives. Even with higher resistance. When your GFCI is tripping be sure to find out why!
@jsncrso
@jsncrso 3 жыл бұрын
EE here. The main purpose of the grounding rod if to keep the neutral as close to 0 volts as possible in reference to earth. What you say on here is true, but that's not its primary purpose
@abpsd73
@abpsd73 3 жыл бұрын
Is it to keep the neutral at 0 volts, or is it the make the "ground" in the area of utilization the same potential as the neutral conductor? The neutral is a low resistance conductor, whereas the ground is high resistance. Thinking back to my electrical apprenticeship when high voltage installations were being discussed, regarding step potential where you could have a large voltage between footsteps due to earth resistance.
@ke6gwf
@ke6gwf 3 жыл бұрын
@@abpsd73 that's basically what he said. It keeps the Neutral Referenced to the earth, keeping a 0v potential between the Neutral, Ground, the earth, water pipes, etc. If you don't reference the Neutral of a transformer to earth, you will still get 110/220v etc out of it, but any leg could end up being at earth potential, or it could be somewhere in between. I have worked on systems where they forgot to Bond the Transformer neutral, and every night when a shorted out photocell controlled light switched on, Neutral would become 120v to ground, and the hot would be 0v to ground, because the lamp was doing the Bonding... That was a fun one to diagnose! Lol
@abpsd73
@abpsd73 3 жыл бұрын
@@ke6gwf I ran into one of those situations as well. It was a golf course under construction, and there was 120V on the neutral, so the utility company refused to install a remote metering transponder. I started poking around and noticed the 600-120/208 transformer didn't have a bonded neutral. Shut it down, installed the bond, then powered it back up. A breaker for an underground feeder to a remote panel tripped on power up. The cable got mashed somewhere by a piece of equipment. The crew chief was pretty miffed that a panel was out of commission, and didn't handle the explanation very well that the original installing electrician missed something. If the neutral was bonded from the start, the breaker would have tripped when the cable was hit.
@ke6gwf
@ke6gwf 3 жыл бұрын
@@abpsd73 good detective work! Lol My story was an industrial machine room that was fed with 3 phase and then had a floor transformer to provide the 110/220v panel supply, and I discovered it by melting the tip off a screwdriver that bridged a ground strip to a cabinet case one evening, but then when I tried to test it and figure out why the next day, everything appeared normal! It took me a few days until I was in the room at dusk and heard the lighting contactor clunk that I made the connection and then discovered that I could make it flip when I turned the correct breaker off and on. The site rep didn't believe me, didn't think it was possible, so I shut a breaker off, and clipped a jumper wire from the hot terminal directly to the ground buss, and said "watch this!" and flipped the breaker on while he screamed at me to stop! Then after nothing happened, I used the tester to show him how the voltage was flipping, and he finally agreed to get the regular electrician to come in, and I guess he was embarrassed when he was told he hadn't bonded the transformer lol (I was dealing with the industrial automation systems.)
@kenshiromilesvt.7037
@kenshiromilesvt.7037 3 жыл бұрын
Funny coincidence, I just got this recommended to me the day after I just bought a ground rod with my dad for our new property!!
@SuryanshInstrumental
@SuryanshInstrumental 3 жыл бұрын
😂😂 Awesome Coincidence 😂😂
@Fer-ty3ch
@Fer-ty3ch 3 жыл бұрын
Your have left something very important in your explanation..for all this to work , that ground rod have to be tested. Some guys would think that install a 10’ ground rod is the solution. The fact is that sometimes you need to go 80’ in the ground before your impedance go down to 20 ohms.. is you don’t test the grounding electrode, make sure you have a good insurance.
@karhukivi
@karhukivi 3 жыл бұрын
Agree. It has to be in conductive ground like wet clay and not dry gravel. A ground test with a Megger is advisable.
@HaInspiration
@HaInspiration Жыл бұрын
👍 & SUBSCRIBED. Very educational, thank you!
@DoubleDeckerAnton
@DoubleDeckerAnton Жыл бұрын
Interesting and very informative.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@boltonky
@boltonky 3 жыл бұрын
Always clear knowledge and interestingly ground rods just can't be placed anywhere and using more than one changes the resistance but some people already knew that
@slurryz
@slurryz 3 жыл бұрын
Can you do a video on why "electricity always tries to return to it's source" My understanding is that "electrical current will flow from a point of higher electrical potential to a point of lower potential" but I constantly see this trumped by the first rule and would love to know how it works. Thanks.
@girishradhakrishnan2699
@girishradhakrishnan2699 3 жыл бұрын
A battery's high electrical potential is the +ve terminal and low potential is negative terminal.
@kenbrown2808
@kenbrown2808 3 жыл бұрын
there are two types of electrical charge to be considered: in static electricity, you have a "positive" or "negative" charge stored, which seeks to discharge to a point of opposite polarity. this includes lightning and capacitors. in electrical systems that you get work out of, you have an electrical source, whether a battery or a generator. in either case, it has to be a complete circuit to be usable - which means electricity must flow out from the source, through the load, and back to the source; much like a bicycle chain. it has to be a complete loop to propel the bicycle.
@spruce_goose5169
@spruce_goose5169 3 жыл бұрын
The 'source' rule never need 'trump' the potential rule. Potential is relative. A source internally generates a difference of potential--by definition If current did not return to the source (in time) then that implies a charge is building up elsewhere (which can happen), but this then implies that there is a new differential elsewhere that 'wants' to equalize, and it wants to do so with the source. Consider that charge, in the context of power circuits, needs to be constantly replenished--be it by a spinning turbine, a chemical reaction, or photons (photoelectric effect). Where is the charge going to be replenished from? Can it be stolen from some bank? Well if it steels charge, that 'charge hole' will want to be filled. Consider that happening on a contiguous basis and you have a continuous circuit with charge 'returning to source.'
@Rudda1495
@Rudda1495 3 жыл бұрын
Short and very informative
@biblethingsinbibleways6106
@biblethingsinbibleways6106 3 жыл бұрын
Electricity DOES NOT take the "preferred path" to source, it takes ALL PATHS back to source. This hundred + year old misunderstanding was finally corrected 20 some odd years ago and still many teach it incorrectly.
@karhukivi
@karhukivi 3 жыл бұрын
The "preferred" path is the one with the lowest impedance.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@NikeySunfire
@NikeySunfire Жыл бұрын
I just realized a lighting strike is just a big arc between the clouds and the earth's soil...mind blown
@kenbrown2808
@kenbrown2808 3 жыл бұрын
if the grounded conductor between the panel and the transformer fails, the hope is that the grounding electrode will carry enough current to keep the resulting voltage imbalance from being disastrous. it is also used to provide a reference for "zero" volts to ground in the grounded portion of the electrical system. lightning arrester electrode systems are completely SEPARATE from the grounding electrode system. this is also different from an equipotential bonding system which is there to make sure all non current carrying conductive material is at "ground" potential.
@joekesler8014
@joekesler8014 3 жыл бұрын
i was trying to find a polite way of disagreeing with Paul(makers of vid) but you beat me to it. my experience of 45 years teaching upcoming electricians in the field i try to make sure they know the important things that will save lives. one of which is that ground rod (which new NEC code says 2 grounds rods have to be installed) as Ken said is not intended for lightning although it could dissipate some minor strikes, its purpose is to keep a reference to ground. if you lose your neutral an imbalance of voltage can occur(voltage goes down ,current goes up, fries stuff. also i tell them be very carful when disconnecting a ground rod,if it does have a neutral problem could get a big spark when disconnecting.Pauls still a smart guy
@jeffkardosjr.3825
@jeffkardosjr.3825 7 ай бұрын
Separate according to whom?
@kenbrown2808
@kenbrown2808 7 ай бұрын
@@jeffkardosjr.3825 pretty much every code there is.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@eugenepohjola258
@eugenepohjola258 Жыл бұрын
Howdy. Nice explanation. However. Less is discussed about the purpose of the soil rod. The main purpose is to provide a reference null potential. This null potential is then distributed to plumbing, appliances, concrete rebars and so on via the ground wiring (green). Potential equalizing of touchable parts. Observe that the reference null is not soil null during a ground fault in an appliance. The soil impedance will cause the reference null to rise above the global soil null. But the environment of utilization potential will rise alongside the reference null through bonding. The fault touch voltage between the faulting aplliance and the concrete floor will be smaller. So. The rod reference null is not heavily bonded to the global soil null. The best way to provide reference null is not to use just one rod. Use several rods around the house. This will encircle the environment of utilization for best fault potential equalizaton. Better still. Bury a copper wire around the house and connect both ends to the service panel bonding. Regards.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@clickortap6401
@clickortap6401 3 жыл бұрын
Well explained..
@michaelsworkshop9031
@michaelsworkshop9031 3 жыл бұрын
Can you explain more about how the source of lightning is actually the earth?
@SMac-bq8sk
@SMac-bq8sk 3 жыл бұрын
I was pondering over that point as well. Doesn't seem correct, since lightning can also occur between clouds having a difference of electrical potential.
@GoonyMclinux
@GoonyMclinux Жыл бұрын
​The earth is the positive, I believe he is referring to cloud to ground lightening no cloud to cloud. @@SMac-bq8sk
@treefarm3288
@treefarm3288 Жыл бұрын
Questions: my system is DIY. Where are you attaching the ground wire and rod to? My area suffers a lot of lightning. A strike a couple of years ago flipped the circuit breaker, but to no avail, and damaged more things than I could afford to replace. These rods are rare in Australia.
@danielteyehuago1633
@danielteyehuago1633 2 жыл бұрын
Thanks for sharing it with us
@gejokapagador8737
@gejokapagador8737 Жыл бұрын
Thanks for the info.. now i know why everytime that a lightening is happening here in the farm.. the wire that connected to the ground rod is a having a sparks...
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@trade1713
@trade1713 2 жыл бұрын
You see in Australia, fault current WILL flow to earth rod. That's because in the main switchboard, Neutral is tied to Earth rod. That link is called multiplied earth neutral (MEN). If neutral in the mains develops high resistance, or is cut, all current goes from phase to earth rod and back to transformer. Very dangerous situation, since all appliances that are earth will have high potential on them.
@josephrobi6806
@josephrobi6806 2 жыл бұрын
Just watching that make me a certified...
@malaysiaawesomedy
@malaysiaawesomedy 2 жыл бұрын
Very informative video. Can we grow any plants like flowers, vegetable or tree near the grounding rods?
@onlineonline3216
@onlineonline3216 3 жыл бұрын
Big fan Thanks for this video
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@jeffboelter1409
@jeffboelter1409 3 жыл бұрын
So is there an advantage to having 2 grounding rods, from ground out of panel box ? Connected with continuous ground wire.
@ke6gwf
@ke6gwf 3 жыл бұрын
In some soil conditions multiple grounding rods, or complex grounding networks, may be required, in super dry soil, shallow bedrock etc. There are specs for how good the connection is between the earth and the ground rod, and if it doesn't pass something more will have to be done.
@maswarservis
@maswarservis 3 жыл бұрын
Very interested information.
@davidl.howser9707
@davidl.howser9707 2 жыл бұрын
Why is the black hot leg wire at the lamp socket not connected / landed on the socket base terminal as is now shown in the video? Why is the socket's base ground wire shown in yellow instead of green per USA NEC Code?
@lestermark2279
@lestermark2279 3 жыл бұрын
Ground rod also keeps the neutral point at 0V . Correct me if I am wrong.
@pushagainstthezeitgeist4968
@pushagainstthezeitgeist4968 Жыл бұрын
Not quite. It’s the neutral/earth connection that keeps the neutral point at 0 or earth potential.
@vog51
@vog51 3 жыл бұрын
Nicely explained.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@Ronlawhouston
@Ronlawhouston 3 жыл бұрын
Nice, my copper wires burned through. I knew it had been lightening and I made sure to fix it. Now I understand why.
@metatronmen2431
@metatronmen2431 3 ай бұрын
Question. What if is not earth ground and the outlets circuit grounds are connected to the neutral in the electrical panel?. I seen panels with no ground connection bar in the box but grounded outlets all around the property so where the ground come from?.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@IneedMoneyDK
@IneedMoneyDK 3 жыл бұрын
here in Denmark most households use TT system, however places like in the city, were its not possible to burry a rod in the ground due to asphalt they use TN system which is just the transformer stations ground rod ( N ) as i understand
@Samara200M
@Samara200M 2 жыл бұрын
Can I add neutral with earth
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@TPhype-Discovery
@TPhype-Discovery 3 жыл бұрын
Nice, we probably need a video on LCDs.
@ClayLud
@ClayLud 7 ай бұрын
So, if under normal circumstances,, the main service neutral came loose and fell off of it's lug....would the return current just travel down the ground rod, through the ground and up the ground rod connected to the transformer and everything would continue working? I guess not because ohms law means the high resistance of the ground would mean low amps and things would crazy dim...so we would know the main neutral wire fell off the lug. Do I have this correct?
@bobcocampo
@bobcocampo 2 жыл бұрын
Lightning strikes in the primary or HV will not be discharged in the neutral grounded. Best protection is a surge arresters
@diepieche
@diepieche 3 жыл бұрын
Everytime I connect neutral with ground circuit breakers trip. Hahaha 😂😂
@DavidHotrum52114
@DavidHotrum52114 2 жыл бұрын
Here in the Philippines we have one hot wire and the return is through the ground rod. This makes it cheap for the power company to install electrical service. Is there some way to make this system better at my end? The end user?
@dardilly1
@dardilly1 11 ай бұрын
Well explained.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@reefread1234
@reefread1234 3 жыл бұрын
So those are what those things are that i used to take out the ground for the heck of it, oh well ya live ya learn 😂
@331moto
@331moto 3 жыл бұрын
So why when I touch the gang box when touching the hot screw on an outlet does the breaker trip (its an old breaker, not a new gfi one)
@MarineEngineer1989
@MarineEngineer1989 Жыл бұрын
Would be great if you did some ship specific electrical engineering videos like insulated neutral earthing and distribution systems
@rulgempargemilangsago963
@rulgempargemilangsago963 3 жыл бұрын
Good....👍👍👍
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@stighenningjohansen
@stighenningjohansen 8 ай бұрын
Electricity is fascinating, but what is the return path mechanism of a lightning strike, be it from sky to ground, or sky to sky??
@MarioMario-nj6kz
@MarioMario-nj6kz 3 жыл бұрын
Can’t go wrong with a 2 min video
@user-ki8hx1id9w
@user-ki8hx1id9w 7 ай бұрын
Actually I would add something to the video was missed which during lightning there is something add to protect against like lightning protection and surge protection. The part will allow the high current to go to the ground during the fault of lightning on the load or transformer sides called surge protection which allow that high current to discharge in the ground. And during the ground fault I would add also something I believe what mean in the video is a high resistance grounding system which most of the time the user install to provide a continuous operation during faults (for some costumer operation needs).
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@knighthonor44
@knighthonor44 Жыл бұрын
so how to test if its safe to touch a grounding wire that could be potentially energized?
@JustHuman87
@JustHuman87 2 жыл бұрын
Could you do a short video explaining Kirchhoff's Law?
@adambatzianis8408
@adambatzianis8408 3 жыл бұрын
Electricity flows through all paths of resistance.
@karhukivi
@karhukivi 3 жыл бұрын
But not equally. More current through the lower impedance path.
@jasonw833
@jasonw833 3 жыл бұрын
Electrical engineer here, the ground is negatively charged and the atmosphere is positive, meaning there's a surplus of electricity in the air as opposed to the ground and it needs somewhere to go other than elsewhere in the atmosphere. That's why the grounding wire is always black aka ground not hot though technically all wires are to be assessed as hot. So when you have a lightning strike you want that electricity to have the path of least resistance where it can be disapated back to the earth.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@danielgouge4639
@danielgouge4639 Жыл бұрын
When I was a kid I ran and tripped over a metal wire that was tied to a tree and a grounding pole of a mobile home. I flew in the air and hit the ground it seemed like I was knocked out before I hit the ground. My question is was it likely that electrical current was flowing through the wire? Was curious as to whether electricity or the fall possibly knocked me out.
@jimdoria7871
@jimdoria7871 3 жыл бұрын
We have a gravel backfill isolated by fabric from any dirt infiltration around our foundation. Our electrician drove our ground rod into that gravel rather than into the earth. At my mention of it, he said there was no concern. Does this still provide the same function for the ground rod since it is embedded in gravel rather than the earth?
@povoljan13
@povoljan13 3 жыл бұрын
How deep did he bury it.
@jimdoria7871
@jimdoria7871 3 жыл бұрын
@@povoljan13 I don't remember exactly, but at least 5 ft. So far, we have lived here 5 years now and had no problem with our electric service or operation.
@bladeronner01
@bladeronner01 3 жыл бұрын
Depents on the network you use TT IT TN-C TN-C-S TN-S
@Simtroniks
@Simtroniks 5 ай бұрын
I think people are missing the fact that current will flow to the ground rod, not earth. Earth might have high impedance but the lightning rod is providing safe path for ground faults as it is a good conductor.
@EngineeringMindset
@EngineeringMindset 3 ай бұрын
We just published a new Ground fault, short circuit and arc fault video, so much detail! Link HERE➡️: kzbin.info/www/bejne/h5qTqqGJhtxgrcU
@Gordon-r4h
@Gordon-r4h 8 ай бұрын
Earth an lightening Rod 3/4inch ?..5mtres long .. Stainless Steel .. Back in the day when your stainless steel sink bench was Earthed .. Plumbers electricute themselves, hacksawing a copper pipe under the house, an never put a jumper lead on the pipe.
Sub Panels Explained - Why are neutral and ground separated?
16:22
The Engineering Mindset
Рет қаралды 1,6 МЛН
Grounding and Bonding an Electrical Panel
13:24
Appalachian DIY
Рет қаралды 345 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
The Easiest Way To Drive Grounding Rods
6:45
Practical Home Projects
Рет қаралды 199 М.
Installing an earth Rod - New TT Supply
30:36
Residual Electrical
Рет қаралды 56 М.
How Regenerative Braking Works.
23:01
Jeremy Fielding
Рет қаралды 456 М.
Where Does Grounded Electricity Actually Go?
19:36
Practical Engineering
Рет қаралды 6 МЛН
How 3 Phase Power works: why 3 phases?
14:41
The Engineering Mindset
Рет қаралды 2 МЛН
Grounding and Bonding
8:01
schulerruler
Рет қаралды 681 М.
Electrical Grounding Explained | Basic Concepts
6:45
RealPars
Рет қаралды 946 М.
Fastest And Easiest Way To Drive Grounding Rods
4:52
Everyday Home Repairs
Рет қаралды 82 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН