⚠️ *Found this video super useful?* Buy Paul a coffee to say thanks: ☕ PayPal: www.paypal.me/TheEngineerinMindset
@shaikhsalman15094 жыл бұрын
Hey Mate...I am a HVAC engineer and over a period of 6momths I keep watching your videos and confidently say no one gives explanation on HVAC better then you...God Bless you and may give you lots of success ahead...
@moviefreak4672 Жыл бұрын
Hello. I'm also an HVAC Engineer. Is there any more youtube channel you follow for learning? Can you suggest me please?
@engineeringmaniac96962 жыл бұрын
The difference between Engineering Mindset and other channels is that this guy steps down to a kids level to explain things and makes it super cool to learn. Love your works. You really shaped my interests.
@hvacguy116 жыл бұрын
Dude your videos are the best out there for HVAC industrial stuff no one has this type of explanation like this I highly recommend subscribing with the bell on lol
@EngineeringMindset6 жыл бұрын
Thanks, glad you enjoy them and its helping
@TheAkshay097 жыл бұрын
hey mate, I've been watching these videos actively since starting in building services this year and just wanted to say how well you've explained the content so thanks very much. Some suggestions for potential topics that could be covered for future videos: Absorption chillers, co-gen/tri-gen systems, HVAC technical drawings, maybe even one on how the building services industry works ie. contractors, sub-contractors, consultants, service technicians. Thanks again!
@EngineeringMindset7 жыл бұрын
Great suggestions, I'll add them to the list.
@EngineeringMindset7 жыл бұрын
Absorption Chiller video is now live! kzbin.info/www/bejne/ZoObZZuCpdeCa9U
@arturzych1385 жыл бұрын
I think it's so cool that it's a totally mechanical system, no electronics (unless you have the EXV). Making it a robust the system. Awesome, kudos to the engineers that developed these systems.
@tomarankush2 жыл бұрын
One of the best videos I ever seen on KZbin regarding Hvac thank you so much
@JohnDowelll5 жыл бұрын
Recently started in the HVAC engineering industry and I love these vids!
@unclemonster485 жыл бұрын
These videos are really good! Thank you for educating the masses! The mcquay machine your displaying the bulb from the pilot valve goes to a well on the top center evap. There is a temp sensor that is mounted on the suction 90 that gives the suction temp. to the microtech controller. The pilot valve is controlled from that bulb that is mounted in the evaporator. But all in all your videos are fantastic for getting guys familiar with chillers and also us seasoned guys for a little refreshing. Especially when all I’ve been doing is rebuilds.
@rodrigoalonsoparravicini9375 жыл бұрын
Good video!! very clear, simple and with real examples, the key to learn any concepts in engineering !
@Samara200M2 жыл бұрын
Mindset be is good channel for show about electrical and electronic knowledge
@josephdailey96956 жыл бұрын
This is a great channel and so glad I came across it. Thanks and keep up this great stuff/
@saeedhameed91482 жыл бұрын
thanks for making these videos full of information and knowledge
@Sh-iv3zs3 жыл бұрын
Hello sir, I would like to tell you that the first chiller has a float or orifice plate and the small tx valve is used for motor/vfd cooling as the base of the orifice chamber has liquid in it. As this style evaporator is flooded superheat is definitely not used for refrigerant control as it is likely to only be 1k. We work on approach with flooded type evaporators. The 3rd chiller is a Trane RTHB it uses a exv than that feeds the economiser, this exv is positioned determined on discharge superheat, the liquid refrigerant in the economiser is then controlled into the evaporator through a orifice plate, the sub cooled vapour in the economiser is scavenged and recompressed. This style evaporator is also flooded. The later trane RTHC and D also had similar refrigerant cycles but the exv was positioned via a low side float and I believe they may be falling film type flooded evaporators.
@sumeursault5 жыл бұрын
Enjoy your videos! From the novice perspective (me), I believe starting off with an explanation of the thermal expansion valve would have been a little easier since it's the simpler configuration
@hoangvd79946 жыл бұрын
Thanks for your really great and helpful video, and can you advise what is a differences between Internal and External Equalizer Thermal Expansion Valve. Thanks
@EngineeringMindset6 жыл бұрын
An internally equalized TXV uses evaporator inlet pressure to create the ‘closing’ force on the valve. An externally equalized valve uses the evaporator outlet pressure, thereby compensating for any pressure drop through the evaporator
@RaceForGoodLife4 жыл бұрын
class on my phone! awesome channel! thank you I watch them all thanks!
@ronakgothi9406 Жыл бұрын
Thanks for this video....its really helpful.
@deepraja6 жыл бұрын
Excellent job , Paul. Please keep it up. Your coffee is on its way !!. Thanks once again
@muneerhasan6032 жыл бұрын
Thank you for the Video!!! You’re the best
@SlickManChoux3 жыл бұрын
Thank's 4 sharing. Appreciate.
@MrGreatcons7 жыл бұрын
Thank you man you are very helpful 😍
@dm7m7 Жыл бұрын
Thank you for the information. I have a question, what do you mean by superheat? I bit you mean a superheated vapor. the thermal bulb which is located inside the suction line will sense the superheated vapor, but what I know is the status of the refrigerant after leaving the evaporator will be as a saturated liquid.
@nyimachoenyi49973 жыл бұрын
Great video !! Thumps up.
@AllAroundHnadyMan10 ай бұрын
Excellent education
@sharbekmm7 жыл бұрын
the best explanations really thanks
@RahulGawade1236 жыл бұрын
This is nice video. Can you tell us how capillary tubes work as expansion device? I saw it in various Water coolers.
@jangradev6 жыл бұрын
Hello, sir... Please make a vedio on.. Scaling of condensor evaporator in chillers, Also best method and tools require for maintenance of water cooled chillers.. Thanks for ur all vedio, Ur vedio so help full for me and others.. Sir we don't have much money to get tools Sir, superheat in chiller, I can't understand How to implement superheat data on small Ac for solving cooling problems... Again thanks for ur valuable vedios...
@atumbijally30794 жыл бұрын
Thanks for the explanation 👍
@muhammadabusayed31367 жыл бұрын
thanks for such video. it clear my view
@cikgurandom58506 жыл бұрын
thank you so much. great explaination
@nyimachoenyi49973 жыл бұрын
Paul, can you please do a video about latest York air cooled chiller ?
@gonzalomunoz5 жыл бұрын
Excelentes videos, una genial explicacion
@yuvarajc89516 жыл бұрын
Sir u r done great job........this video more useful to me so keep doing in Chiller video
@mr.zenoh.2560 Жыл бұрын
Thank you
@muhammadawais63367 жыл бұрын
perfect my friend and thanks
@rayyandeshmukh82554 жыл бұрын
Thank you sir, Video was so usefull Sir, can you please upload any animated video how these vales works??
@kisyanto9075 ай бұрын
Good and very experience
@mikefochtman71645 жыл бұрын
Nice video but you don't go into the aspect of the TXV sensing superheat. You mentioned the Thermal Expansion valve shown had an external pressure 'equalizing' line, but didn't go any further. By sensing both the compressor suction PRESSURE and TEMPERATURE, the TXV can actually sense the degree of superheat above saturation. The spring setting can determine the degree of superheat. So a drop in suction pressure will tend to open the valve, even if the suction temperature remains steady and vice versa. If the valve only responds to suction TEMPERATURE, then an overcharged system can still pass liquid into the compressor under the wrong conditions.
@mohammedimran63285 жыл бұрын
Thanks for your very helpful video and i am very grateful for your work. I have a question, If the expansion controlled flow of refrigerant then why IGV inlet guide vanes are used in centrifugal chiller? I hope you will clear my doubts.
@EngineeringMindset5 жыл бұрын
We've covered this in our series, can watch it here kzbin.info/www/bejne/nF6xZZypnLaFfbM
@VinodKumar-gy7ft5 жыл бұрын
Nicely explained.
@RP-nc5ev2 жыл бұрын
Thanks
@janicesmyth21835 жыл бұрын
thank you so much for your videos!
@recardoromero6296 Жыл бұрын
Very nice thanks...❤
@vineethrajagopalannair95145 жыл бұрын
Hi can you upload the procedure for how to charge/Change refrigerant and oil to chillers? It will be of great help.
@aissabousekri76657 жыл бұрын
thank you very much sir .if you can tell us the most problems come on chiller ,and if you can explain litll a screw chiller
@EngineeringMindset7 жыл бұрын
You might liek this video on chiller faults kzbin.info/www/bejne/kKaTfYmMg7OJidk
@majedal-harbi17746 жыл бұрын
Thanks A lot
@gregorymalchuk2725 жыл бұрын
I have a question. As the load decreases and the superheat decreases, what happens to the liquid refrigerant in the line between the pilot valve and the main valve that enables the main valve to close? Does it leak back through the pilot valve, or is their a bleed at the main valve that allows pressure to leak down? Thanks.
@nikkuthomasabraham37846 жыл бұрын
Well explained.
@hengchung15 жыл бұрын
hi this is great video. Could you also explain the relationship between the temperature and pressure to control the expatiation valve. Thank you.
@EngineeringMindset5 жыл бұрын
Check out of expansion valve videos
@surendermohansharma3773 жыл бұрын
Defind nicely
@ibrahimosman33937 жыл бұрын
Very useful
@Bhajankerasik4 жыл бұрын
We are experiencing a problem in our chiller system which is having an electronic controllled expansion valve. We have charged the system with 20 kg of R407 gas after having an alarm of low pressure. But it was not rectified and pumping down the system..we could barely see any gas coming back to condenser which was showing 75% when we charged it earlier. What all we have checked is 1. Dryer....ok 2. Evaporater...ok no leakage 3. Expansion valve changed from a already working chiller system. Please guide us on what could be the possible cause of the syatem showing low pressure.
@RP-nc5ev2 жыл бұрын
Great 👍 👌
@ShimoDarkhani Жыл бұрын
Hi Sir, Can you help me out, that how can get recover the Oil in Sump from Evaporator in Centrifugal chillers.?
@movax20h4 жыл бұрын
The pilot expansion valve is like Darlington transitor pair in electronics.
@ShimoDarkhani Жыл бұрын
Hi Sir, Can you help me out, that how can get recover the Oil in Sump from Evaporator in Centrifugal chillers.?❤
@shubhamraturi33484 жыл бұрын
1. What will happen if water droplets get into a centrifugal compressor? 2. What will happen if gas or vapour get into a centrifugal pump? 3. What will happen if we remove expansion valve from the centrifugal chiller or vapor compression cycle? Thank you.
@tonkie107 жыл бұрын
Hi friend @theengineeringmindset I have a question for you, in another video I saw That in the sucction line there is a refrigerant low pressure, low temperature, saturated vapor, but why the thermal bulb is in the suction line?? because knowing that the discharge line has the superheated vapor it should be in the disacharge line because the compression isn´t happened yet. Tnank you in advance.
@EngineeringMindset7 жыл бұрын
try this video it will help kzbin.info/www/bejne/pYSvgHt5hNxmr8k
@A-GoldenBar6 жыл бұрын
Should bas control chiller staging using building btu or building chilled water supply temp. ?
@muhibali2054 жыл бұрын
Great
@pawanYadav-zi6bz3 жыл бұрын
great
@heshwanth4 жыл бұрын
Where does the refrigerant gas goes from the pilot expansion valve once it pushes the main expansion valve. How does it recoil? Can someone explain me
@mechanical-g8w Жыл бұрын
tanx
@surendermohansharma3773 жыл бұрын
Super
@MR-nl8xr6 жыл бұрын
Bravo
@IceyJunior7 жыл бұрын
Nice
@IceyJunior6 жыл бұрын
how can liquid refrigerant flow to the bottom of the evaporator? it's it being pulled by gravity?
@EngineeringMindset6 жыл бұрын
It's being pushed by the pressure generated by the compressor as well as the suction from the compressor
Sir I am new on this field, thats why I am little confused about, so my question is why there is two valve, pilot and main
@EngineeringMindset7 жыл бұрын
when the chiller gets too large, a normal TVX will not fit or work, so a pilot valve is used
@DeepakRohra7 жыл бұрын
Thank you so much for the explanation :) i just had one question, The refrigeration cycle starts with the suction stroke of compressor right ? if yes then in that case how does the flow of refrigerant takes place ? i mean does the evaporator is filled with the refrigerant ?? thanks again
@EngineeringMindset7 жыл бұрын
Hello, yes refrigerant sits around the machine when idle, it only moves when the compressor starts. Over time the temperature will begin to equal out but as the machine starts it will change again.
@parvezalam79177 жыл бұрын
what is the right superheat temperature for this kind of machine. I have 4 No's chiller which has different superheat
@EngineeringMindset7 жыл бұрын
Hi Parvez. Have a look for the serial number and contact the manufacturer, they will give you the best advice as it will vary
@kevinpansu5 жыл бұрын
chevere
@mdumar76234 жыл бұрын
What's is the temperature of refrigerant at 4 stages in chiller?
Why can air compressors deal with liquid when the compress air in the piston cavity but not refrigeration compressors, negating the fact for refrigeration liquid dilutes the oil?
@rccanuck44737 жыл бұрын
What would cause the evaporator pressure to drop too low ?
@EngineeringMindset7 жыл бұрын
There's a lot of reasons it might happen. Possibly a tube blockage, too high water flow rate, maybe the wrong delta T from design. Have a look on the BMS logs to see what was occurring at the time of fault. Compare it to other times and see if there is a comparison. If it gives an error code then look it up with the manufacturer to diagnose.
@EngineeringMindset7 жыл бұрын
We just covered chiller faults in our recent video! kzbin.info/www/bejne/kKaTfYmMg7OJidk
@benardasiimwe44145 жыл бұрын
Hello engineering mind.com Am Benard currently working in Qatar ,I have a question Do u have HVAC school in Qatar
@EngineeringMindset5 жыл бұрын
No, we only have our website no physical schools
@shiwanlin28 күн бұрын
Latent heat overheat
@cagriceylan14914 жыл бұрын
the VRF link does not work, can you fix it? Thanks in advance.
@EngineeringMindset2 жыл бұрын
New VRF unit video here:➡️ kzbin.info/www/bejne/apqUiZqZhZano9k
@Valentinaobumnaeke Жыл бұрын
Why is my expansion valve opening full
@robthebuildermoore33314 жыл бұрын
An expansion valve maintains a constant super heat across the evaporator.
@JoaoSousa-x4r Жыл бұрын
Can you share the 3d models
@ahmadabulafi74932 жыл бұрын
are you a mechanical engineer ?
@EngineeringMindset Жыл бұрын
See our new video on how to build mechanical versions of electronic circuits? Watch here: kzbin.info/www/bejne/kKecgmqfnZlri8U