Build A Competitive Pro Controller With Hall Effect Joysticks

Soldering Stuff:
Soldering and Heat Gun Station: amzn.to/470TYFk
Soldering wick : amzn.to/3tJt4mT
Removal Alloy for STD Rework: amzn.to/3tTTDGf
Tip Tinner: amzn.to/3sdYQbu
0.3MM Soldering Wire: amzn.to/3MqtGEG
Coal Soldering Iron Tip Cleaner :amzn.to/3FybhSx
Blue Soldering Mat: amzn.to/3QAsdOi
Helping Hand Soldering Clamp: amzn.to/3SjWYZg
Soldering Pucker Sucking Device: amzn.to/3QCqd8w
Precision Tweezer Set: amzn.to/48n9U60
Hall Effect Joysticks: amzn.to/3VphRUw
BDM 010/020 Parts
4 Back Paddle Kit: amzn.to/3IHM0a7
Touch Bar LED Light Bar: amzn.to/3IK5Jpv
Clicky Hair Trigger Kit: amzn.to/3TJjFGw
Front Face Plate: amzn.to/3vmxmlp
Custom Buttons: amzn.to/3PsEgwk
Interchangeable: Thumbsticks: amzn.to/3vhuG8I
Trim Shell: amzn.to/4ahPOuk
Hall Effect Joysticks: amzn.to/3VphRUw
BDM 030/040 Parts
4 Back Paddle Kit: amzn.to/3VwPKT8
Click Hair Trigger (BDM 030 Only): amzn.to/3Vl2356
Touch Bar LED Light Bar: amzn.to/3IK5Jpv
Front Face Plate: amzn.to/3vmxmlp
Custom Buttons: amzn.to/4acqDcM
Interchangeable: Thumbsticks: amzn.to/3vhuG8I
Trim Shell: amzn.to/4ahPOuk
Hall Effect Joysticks: amzn.to/3VphRUw
From Direct Site www.eXtremeRate.com
Promo Code 10%: GAMER2KNOW
4 Back Paddle Kit: rb.gy/j13anl
Click Hair Trigger: rb.gy/c6gt5p
Touch Bar LED Light Bar: rb.gy/93y89f
Front Face Plate: rb.gy/diqt4g
Custom Buttons: rb.gy/fxn7h6
Interchangeable: rebrand.ly/s30302j
Trim Shell: rebrand.ly/brsd7ew
15% OFF KONTROL FREEK WEBSITE: glnk.io/3vlxq/Gamer2Know
I tried to attempt something that could even be above my head. But I like a challenge, something that will peak my experience and hopefully, I'll learn something new. In this video I built a pro controller out of a Playstation 5 Dualsense;, including 4 back paddles Rise 4 kit, Click hair triggers, LED lights for the touchpad, a new faceplate cover with a matte finish black trim, and swappable joysticks with three different lengths. The ultimate pro controller is something you would buy from those highly competitive pro controllers like SCUF, AIM Controller... But even those don't come with Hall effect joysticks to prevent stick drift now or in the future. Installing the Hall effect joysticks is at the top of the priority list for a pro controller, and we are going to roll up our sleeves and attempt to do it all here in this video! So sit down, relax, and enjoy!
#playstation5 #ps5controller #DIY

[@Mr_Battlefield]

That desoldering and soldering job looks really bad to be honest. I'm no professional, but I've been watching quite a few videos of professionals soldering and desoldering boards to get a better understanding of how this is done and it looks really bad in your videos. Looks like you destroyed the board at times in the video.

[@gregoryp203]

you shouldn't demonstrate soldering if you don't know how to do it

[@StripesNoCommentary]

Or you also can buy one from Aim controller 💪

[@Mr_Battlefield]

🤦‍♂️ Cutting ✂️ a wire to disable the Triggers force feedback motor. What the heck. Destroying that expensive DualSense controller. 🤦‍♂️ You should have bought a used DualShock 4 controller instead.

[@chasewinters7050]

This guy will help you break your controller. He says it's easy but it's not. He's obviously been doing stuff like this for years most likely. I ruined my controller because this guy convinced me this was easy.

[@azazel166]

I'd pay you to make me one, but there is an ocean separating us and we do not have the same currency.

[@kellymoses8566]

You can just buy a new controller with Hall Effect sticks built in. They are like $40

[@hove131]

There's software for calibration of PlayStation controllers.

[@BlindingWulf]

What was the circularity percentage?

[@jeffreyodachowski6247]

Ill believe it when ever i see you using it on call of duty with no drift. I didnt like what i seen when you were calibrating it. It didnt look like it wanted to stay where you placed it. Like if you were to bump it. It would go right out. Like i l would love to believe it but its in the video. I want to see it move perfectly with the screw your turning.

[@sgonzalezht]

How do Hall effect joysticks work? Interested in swapping to the hall effect... but I want to validate if they are good changes or not

[@OKBUDDY21]

You don't have to apply flux when using the heat gun to get the joysticks off?

[@FreeStudio560]

Good video as always, Can we see in the future ps4 controller but put 2 buttons on the back? Like what the battlebeaver or scuf or other company is offer? Have a good nice day 🤟🤟

[@DioBrando-qr6ye]

You thought the red controller was drifting, but it actually had an issue with the motherboard, am I correct? I'm asking this becsue I think I've been in the same situation, twice. After dropping my DS one time too many, one of the thumbstick started moving on its own sometimes, but it didn't look like drifting.

[@weedless9531]

All the other videos I've seen of people installing these hall effect sticks have a problem with the sticks reading 100% before the sick has even got to the end.

[@trelokomiotrelo7352]

Does anyone know If extreme rate rise4 remap kit for ps5 BDM-030 applies to Europe because it is made in China.i order BDM-030 and i m in Europe.pls someone to answer

[@brianghostfury]

I'd pay you to do one for me lol

[@carreraluu]

Nice breakdown and fix. Btw are your boards failing due to ESD or your soldering iron is burning the circuit board?

[@fizzo177]

amazing bro, you have a very nice personal PS5 controller now, cooool ;)

[@ProANAS]

What is the name of the website you are testing the control hand?