Man I appreciate your videos. You do it justice. Like you said a lot of people just film the quick process. We want details and in depth looks. It helps us noobs out. I’ve used every bit of info you’ve given out for my own civic. So big thanks man, we appreciate it.
@MrRadlom4 жыл бұрын
Great video, watched so many on this subject but you’re the only one that mentions the camshaft lock pins. Thank you
@jaybirdls1 Жыл бұрын
Much appreciated! Doing this chain job for a coworker, was looking for something to tell me if the crank and cams were at 0* and you clearly showed all the arrows and even those alignment pins 👍🏻 Thanks
@Shuck-d9n Жыл бұрын
Great job! Very informative with ALL the details which helps many back yard mechanics. I've been turning wrenches for over 55 years and I know many professionals will deliberately leave out the finite details because it brings money into their shops which is understandable however, if that's their game, they shouldn't be posting videos in the first place! Hope everything turned out well for you!
@johnswayze37902 жыл бұрын
What a huge help! Recently had my k24 jump time luckily only a tooth. Preparing to install a new chain kit tomorrow. Youre always very informative and actually show the process.
@Stancedude1 Жыл бұрын
What’s your mileage??
@ihackmobile Жыл бұрын
What were the symptoms after it jumped timing?
@Davidityourself Жыл бұрын
Thanks so much for the in depth timing chain guide cant wait to do this job on my build
@zacallen7100Ай бұрын
Thanks for the descriptive explanation you wouldnt think with how popular this engine is it would be so hard to find a good video on anything.
@jonathancostella46554 жыл бұрын
Dude thank you so much🙏🏼 there is hardly any good videos out there about things we need to see. Currently in the process of sourcing everything I need on my k24a swap for my 09 fa5🤞🏼
@TheGerbsteve4 жыл бұрын
You are welcome and I hope these vids will help you when it’s time for your swap. What happened to your k20?
@jonathancostella46554 жыл бұрын
Gerb blown headgasket😔 had a bunch of problems leading up to it. Car was definitely abused before I got it. Only good part is the dealer I got it from put a brand new trans and clutch in it about 100 miles before I bought it. Haha. Been sourcing parts already and probably pulling my motor tomorrow and prepping to paint it and clean up the engine bay.
@michaelgranville17334 жыл бұрын
Very helpful. I just picked this motor up for my 93 Civic and plan on doing the same. Being new to K series i found this video a perfect example on how to get it done. 🤘
@joerodrigu Жыл бұрын
You inspire me to go back to working on my car again brotha thank you!!!
@guerrag04114 жыл бұрын
very simple, very helpful brother, thanks man.
@bngknbeal82042 жыл бұрын
I'd like to see the chain installation. I currently have an 06 honda accord with the 2.4 that im about to do a timing chain on.
@theburningredbeacon96252 жыл бұрын
Did you find an install video? I have to complete this task
@HAZARDWILL2 жыл бұрын
I want to replace the oil pump chain, do I need to remove the oil pan in able for me to get the chain removed? But I’m also going to replace the timing chain.
@Semystic2 жыл бұрын
Thank you for this. I get the pleasure of tackling this myself.
@colonsteven70639 ай бұрын
Thank you. Exactly what I needed to continue.
@daveo14462 ай бұрын
HI mate great video. thank you....we have a k24z in my daughters 09 honda accord euro Australian spec..(acura tsx) over there.. it has the cold start rattle which were addressing shortly but also pings under load all the time..could this be the timing chain stretched or chain tensioner gone bad..? looking like ive got to remove the engine to do this job..? any advice appreciated..
@DOUBLE0SEVUN Жыл бұрын
1:00 What happens you I didn't set the engine to TDC before taking out the timing chain? My engine skipped timing so the marks don't even align. I already took the chain out did I mess anything up?
@TruckThisGarage3 жыл бұрын
Also what do you do when it’s at TDC but the horizontal marks don’t line up on the CAM gears??
@speeddemon80922 жыл бұрын
There's holes on the back on the cam phasers opposite side off the gear when you have both gear pointing at eachother. You put either the tool they sell in those holes to lock it in place or use drill bills once you do that you cams are set and you put bottom TDC. K24 has 2 colored links per cam mark and one colored for crank mark. One everything's lined up zip tie with out the tensioner thatl keep it in time and putt the tensioner on tighten it pull the pin. Cut zip ties you know the rest your 🙏
@Robinhood179 Жыл бұрын
Anybody know what size that allan wrench is for that chain guide? #6?
@dr650guy74 ай бұрын
Hi if’s posible to replace the tensioner tru the access plate in the timing cover?
@spago5552 жыл бұрын
Thanks for the great video. If I were to change the timing tensioner only by taking the tensioner cover off, with the engine in the car - how can I ensure the chain does not jump timing? It looks like the guide becomes very loose once you take the tensioner off.
@209ers2 жыл бұрын
What size is the Allen wrench?
@carlosmoreno23872 жыл бұрын
Thanks man you are awesome dude all information is in the video
@vmanjose2 жыл бұрын
Great descriptive video! One question, I have an oil leak coming from the bottom right timing chain cover just above the oil pan right side. It looks like there’s no gaskets inside so a simple Honda bond reseal should work ?
@TheGerbsteve2 жыл бұрын
Try some good old Honda bond, stuff is a life saver
@phazerboy9 ай бұрын
Showed me what I needed to know. Thanks!
@ELopez-jv1zx3 жыл бұрын
Excelente video and very well explained I will use it in the future, thank you and thank you, a 99.99.
@GhadSpeed2 жыл бұрын
Is removing the entire engine the only way to put in a new timing chain?
@alm1ghty4l90 Жыл бұрын
I need to know the same thing
@BenjaminHansen Жыл бұрын
I have seen vids where it was in the car.
@BenjaminHansen Жыл бұрын
@@alm1ghty4l90 I have seen vids where it was in the car.
@FastlaneHero2 жыл бұрын
Bro thank you for this amazing video! Video is literally such a life saver!
@mikesmith-hg5wi4 жыл бұрын
Love the k24. Why are there 2 different looks of the 9th gen si coupe (fg4)?
@TheGerbsteve4 жыл бұрын
Some people like coupe, some people prefer sedan. Regardless, there is a market for both
@paulj58334 жыл бұрын
One of many great videos. My timing chain jumped so on to the tensioner. What is the part number for those cam shaft alignment pins?
@TheGerbsteve4 жыл бұрын
Thank you man. I’m sorry to hear about the crap news. I don’t have the part #, just look em up online
@Juicyb00ch4 жыл бұрын
Awesome video dude. Thank you.
@TheGerbsteve4 жыл бұрын
Appreciate that. Hope it helps you 🤘🏼
@pinoRay4 жыл бұрын
Great Video! I have 2013 Accord sport and the cams do not have the pins on the other end. Any advice how to align the intake and exhaust cams? Thank you
@robertbobin50533 жыл бұрын
Just align the marks on the cam sprockets, w/ no. 1 piston at t.d.c.
@johnmartin6024 жыл бұрын
Thanks for the nice video! Very helpful with my crv timing chain replacement. Stupid question, what's the lower chain, and do I need to replace it too? My kit came with a replacement, but I cant get the old one off.
@TheGerbsteve4 жыл бұрын
You’re welcome.. lower chain is for the oil pump and you can if you want, but a lot of people just leave it the way it is.
@withku4 жыл бұрын
Do I have to pull out my engine to replace the timing chain? Mine is stretched and I don’t know how to do this.
@TheGerbsteve4 жыл бұрын
No, you can do it while the engine is in the car, just going to be a tight squeeze.
@Ruben9013 жыл бұрын
@@TheGerbsteve A tight squeeze indeed, it's best to use a small ratchet 🤪
@GabrielLopez-fi3tz11 ай бұрын
Where did you get those pins that hold the cam
@williamyocum87324 жыл бұрын
Nice video, but other than the basic stuff to replace is anything else needed? Like the ECM? Have an 07 si sedan and am new to this kind of stuff.
@ryanrezi4 жыл бұрын
Lunchable tray ftw!👌💪
@TheGerbsteve4 жыл бұрын
He knows 🤣👌🏼
@runemproduction318728 күн бұрын
I’ll be ding mine this weekend thanks. Can you attach the link to the install video to my comment lol or the description. ✌️
@KidHonda803 ай бұрын
Hell yeah thanks man make one putting it back on
@JVazquez-e5x10 ай бұрын
Great video & detail ….Can you make an install timing chain video …
@lisamcevoy6221 Жыл бұрын
Thank you, great tutorial.
@jessdziegielewski89372 жыл бұрын
I’d like to see the chain install!
@frankbeniz85262 жыл бұрын
Thank you so much for your vidio I really appreciate
@Ratlins93 жыл бұрын
Great video and thank you, a big help.
@joelwachter78453 жыл бұрын
Is it the same for the k24a8
@TheGerbsteve3 жыл бұрын
Should be very similar
@joelwachter78453 жыл бұрын
@@TheGerbsteve your awesome thank you
@clinteastwood6663 жыл бұрын
If just changing the tct as preventive maintenance and engine is still in car you wouldn’t need to put those pins in the cam gears to remove the tct?
@TheGerbsteve3 жыл бұрын
Yes, I recommend using the cam pins so none of the gears move for replacing the vtc
@amored_up2 жыл бұрын
Could you provide a link for the timing chain you used?
@jahiralvarado36344 жыл бұрын
Excelente, vídeo muy bien explicado, es justo lo que estaba buscando
@darinelguerrs12023 жыл бұрын
Consulta
@georgekoech75102 жыл бұрын
Very informative. Thanks a lot.
@ehiojieyan85052 жыл бұрын
If there’s nothing wrong the chain cover you can just reuse it right?
@TheGerbsteve2 жыл бұрын
Yes indeed
@mdarfat-ti2sm3 жыл бұрын
Nice video.... Brother❤️❤️❤️❤️
@TheGerbsteve3 жыл бұрын
Thanks man
@skullduggery33774 жыл бұрын
so i have a slight leak in my timing chain cover on a 2007 accord with 89k. it's under warranty for that but the mechanic recommends i replace the timing chain and have a valve adjustment at my expense since it will all be opened up anyway. $300-$400 for my end...do you think it's worth making this investment when there are no signs of needing these repairs? i plan to hang onto the car. appreciate any response.
@turbodog992 жыл бұрын
yes
@skullduggery33772 жыл бұрын
@@turbodog99 - i ended up not doing it. forgot all about it til now.
@vmanjose2 жыл бұрын
Do you know how they ended up fixing the leak? I also have a leak on the cover just above the oil pan but I’m trying to see if I should just open up the cover and reseal it with Honda bond
@skullduggery33772 жыл бұрын
@@vmanjose - i had them just replace the (timing chain) cover. didn't cost me anything since it was under warranty. i didn't have the additional stuff done although it wouldn't have been a bad idea; as a preventive thing. i just don't like doing work if it's not needed. for your situation, i would just make sure i knew which cover the leak was coming from and go from there.
@alfreogarcia7442 Жыл бұрын
thank you for the idea
@withku4 жыл бұрын
Appreciate the video man, this saved me.
@TheGerbsteve4 жыл бұрын
Not a problem bro 🤘🏼
@21guillotine3 жыл бұрын
Hell yeah dude helped me out...
@sergiorodriguez30964 жыл бұрын
Great video bro any part number for the alignment pin tool
@TheGerbsteve4 жыл бұрын
Thanks bro and no, I don’t have it. If you search Honda alignment pins, you should find them.
@grantm44003 жыл бұрын
Notice you said the mount needs to off, this can’t be done with the engine in can it?
@jackhill13774 жыл бұрын
Love the gerb vids, install vid for sure
@TruckThisGarage3 жыл бұрын
The timing marks on my oil chain don’t align with the arrow at TDC??
@Ruben9013 жыл бұрын
You have to keep cranking it until they align at first before removing anything
@TruckThisGarage3 жыл бұрын
@@Ruben901 I got it figured out. Thanks for reply.
@AlejandroMorales-bv2wv2 жыл бұрын
The was awesome video, thank you.
@hugogarza7183 Жыл бұрын
Very clear the spleain thanks
@lh983 жыл бұрын
How many miles before these have chain issues? I’ve not noticed any problem with mine but now I’m worried
@PsillyFL3 жыл бұрын
60k - 105k depending on how severely it is driven
@lh983 жыл бұрын
@@PsillyFL hmm we’ve got 120k on ours and have not had any issues there.
@TheGerbsteve3 жыл бұрын
I've heard like 100k-120k, but the chain are meant to last forever, I believe. It's the tensioners that give out or cause the chain to wear.
@lh983 жыл бұрын
@@TheGerbsteve thanks for input, I hope ours continues problem free. I think I noticed some light wetness of possible gear oil around the output shaft during the last oil change. May be a seal, now to figure out if that’s a big job or if those additive sealers will work.
@mpaxton66863 жыл бұрын
Mine just stretched and jumped time at 265k miles
@mcdus783 жыл бұрын
This is so helpful. Thanks!
@TheGerbsteve3 жыл бұрын
Glad I could help you out
@dominichuynh42993 жыл бұрын
Great video. Thank you so much Liked and subscribed
@TheGerbsteve3 жыл бұрын
Glad you liked it and thanks for the support !
@Justsendit954 жыл бұрын
Very descriptive, I really enjoy the output keep it up
@TheGerbsteve4 жыл бұрын
Thank you, hope it helps you out 🤙🏼
@tristianbowebowe59662 жыл бұрын
Which timing chain did you use?
@TheGerbsteve2 жыл бұрын
k24 tsx chain
@spatt833 Жыл бұрын
How do I get the engine out first?
@TheGerbsteve Жыл бұрын
Made a series on it
@jordanydanger77704 жыл бұрын
Great video bro and stay safe out there
@TheGerbsteve4 жыл бұрын
Thanks bro, same goes for you. Ik there’s a lot going on right now
@edwardthayer93862 жыл бұрын
Not trying to be a douchbag but this was a removal, not replacement. So maybe I'm supposed to know but I'd like to make sure. Is a installation of a new chain just in reverse order from your video? Thank you for your time and help.
@graysong29612 жыл бұрын
This is super awesome! I am currently taking a k24a2 apart and I have no experience…. Why are you making sure everything lines up before you pull the chain off? Why did you want the piston closest to the chain at the highest point? Why did the tensioner need to be locked before being pulled out? Is their a specific order the bolts on the top of the head need to be removed?
@RiQWitDaBliQ2 жыл бұрын
That’s to put it in timing so he can just put the new chain on and tighten everything back up
@volkanazman17673 жыл бұрын
Great job mate really help mate thanks
@TheGerbsteve3 жыл бұрын
Glad it helped
@CHIBA280CRV3 жыл бұрын
Thank you sir for the very informative video 👍 hey where can I get those lock pins at ?
@TheGerbsteve3 жыл бұрын
You’re welcome. I bought mine on eBay
@MIKEYSREVIEWS4 жыл бұрын
You should show the new chain and old chain side by side to see how much it stretched.
@TheGerbsteve4 жыл бұрын
I plan on it bro 🤘🏼
@applepoop102 жыл бұрын
They don’t stretch unless ran low on oil
@jorilarson41414 жыл бұрын
Bro I need to do this but engine is in the car. How much will that suck?
@TheGerbsteve4 жыл бұрын
I’m helping my buddy out with one in the car right now. It’s not a lot of fun lol. Let’s just say, “tight” haha. It will be same process, but you’re going to have way less room. It is doable though, I’ve heard of a decent amount of people doing it themselves.
@kevinflores40954 жыл бұрын
The white dots/arrow on the cam gears are supposed to be between the different colored chain links and and line up the bottoms arrows and the chain link as well will have a different color on the chain that supposed to line up to marks on motor your at tdc but not in time perfect just letting you know
@brandonsalas6552 Жыл бұрын
There is a Honda tool that holds the crank pully by the way you CANOT BUMP THE STARTER WITH A BREAKER BAR TO BUST THE BOLT FREE
@NFTYCENT2 жыл бұрын
Many thanks brother.
@nestorfernandez18269 ай бұрын
Cuánto sale reparar un motor de honda Accord 2.4 que quede nuevo..?
@screwedupcivic22854 жыл бұрын
Hell yeah will be a big help waiting on chain guides and chain for my k20.
@TheGerbsteve4 жыл бұрын
The only difference with the k20 is that the little dots on top of cams go in the middle of one black colored link instead of two like the k24. I wish you the best luck with the job 🙏🏼🔧
@screwedupcivic22854 жыл бұрын
@@TheGerbsteve thanks bro
@brandonsanchez504 жыл бұрын
Really nice video thanks a lot.
@TheGerbsteve4 жыл бұрын
Welcome man
@ESTRANGEDRU4 жыл бұрын
Great video. Way beyond my skills. Can't do it myself, yet very interesting to see how it's done.
@robertbobin50533 жыл бұрын
If one can turn a wrench, and watch a video, most women can accomplish this repair.
@paulj58334 жыл бұрын
Those pins are very handy. Honda 07AAB-RWCA120.
@keeon19322 жыл бұрын
Thanks man
@jddeefo1022 Жыл бұрын
Wouldn't mind seeing the process to remove the engine from the car.
@kenhardy41673 жыл бұрын
Would be a great video if you actually finished the job.....i.e. SHOWED HOW TO INTALL THE NEW CHAIN AND GET THE TIMING CORRECT!
@pauljarrell8162 Жыл бұрын
I think it’s just the idea is to do your prep work correctly and then it should be right when you do this all in reverse
@allmotorfg24374 жыл бұрын
Doing a k24 swap in the fg2?
@TheGerbsteve4 жыл бұрын
Yessir. Just finishing up some final touches/maintenance before I drop it in
@allmotorfg24374 жыл бұрын
@@TheGerbsteve Did you do an oil pump upgrade?
@TheGerbsteve4 жыл бұрын
Not yet, but I’m contemplating on it 🤔... If I can get at least 8k rev out of my k24, I’ll be content.
@allmotorfg24374 жыл бұрын
@@TheGerbsteve Don't know what kind of budget you're on but hptautosport sells the PRB oil pump kit that's already modified to fit the k24 block. Comes with everything but the oil pump chain tensioner you have to buy separately. That'll get you 9k safely if you ever decide to go with bigger cams.
@icelover34 жыл бұрын
@@allmotorfg2437 9k on a stock k24 bottom end would be a bad idea
@nathanbolin5023 жыл бұрын
Good video but what is that weird lady grunt @6:41?
@2point22 жыл бұрын
1:45
@humbertolopez8103 жыл бұрын
Helpful lthanks
@TheGerbsteve3 жыл бұрын
Glad it helped you out
@giopirmisashvili55145 ай бұрын
Thank you
@iBraydenn4 жыл бұрын
should just put your z3 head on it. no need to upgrade the oil pump if you're not turboing it you can still rev out safely to 7800
@davocn8 ай бұрын
Keep in mind that the K24Z2 does not have a crank position sensor in the same location so you will have a washer instead of a sprocket on the crank shaft...
@tor11924 жыл бұрын
You are my GOD!!
@TheGerbsteve4 жыл бұрын
Thanks haha 🙏🏼
@angihippey9153 жыл бұрын
Good job
@TheGerbsteve3 жыл бұрын
Thank you sir
@juancamaney3562 Жыл бұрын
nice video. never stop wrenching. stay dirty bro 👍
@RepairLegion3 жыл бұрын
Ty
@steveb.73024 жыл бұрын
Got the alert super early had to watch
@TheGerbsteve4 жыл бұрын
Thank you, appreciate you. Don't usually upload early
@dumbeezy54802 жыл бұрын
how come nobody has a DIY for a 9th gen K24?
@TheGerbsteve2 жыл бұрын
Probs because they just keep the k24 the 9th already has... I know people do the k20 head swap on the 9th gens a lot.
@mr.m523 жыл бұрын
Remove the harmonic balancer not the crank shaft
@jeremyjohnthompson51873 жыл бұрын
kzbin.info/www/bejne/rKGnZGikmax1pbs, but hang on, those punh marks woudl only be horizontal if the timing tcahin wa snot stretched and everythign is rosey, in whcih case you wouldnt be doing this? The ocrret way is to put the cover back on and line up the crank pulley with its tdc mark.