I Tested Your Fingerboard Hacks…

[@thebroboards]

And they mean taking a tech deck and heating up the plastic board and bending the angle of the kick steeper for more pop

[@Sapling3]

Yep

[@theghostface5905]

Yeahh only works for plastic boards ….you can tell his age from not knowing 🤣🙏✌️

[@Sapling3]

@@theghostface5905 who?

[@meka21customs]

I came here to say thus exact thing lol works with plastic tech decks 😆 I did this when I was a kid for sure but only gave mine a slight bend to much and jt looked weird 😅

[@thebroboards]

@@meka21customs yea

[@franzpattison]

The best thing I've used for applying foam grip tape is using 250 grit sandpaper because it can shape to the side of the board and make a nice bevel. It can also be used on the surface of the tape to wear it in a bit

[@BearBoards]

Thanks for including my hack at 10:04 in the video, lol.

[@devinanderson6716]

Lock nut needs a retry with a proper tool! For the tape on your grinding ledge trick use painters tape for a more slidey feel (perhaps.)

[@JustNolanYT]

8:31 I cannot believe my hack made it in! I should have been a bit more specific, it works better with plastic wheels to give them more grip. Thanks fire including mine! I love your content!!!

[@heatherdagostino4388]

Use shrink tube over wheels for grip

[@skate_ApeXblading]

I did that

[@traxxasdirtbike]

I've been doing the tape Scotch tape to make an obstacle slide better for years

[@factionjc]

R.I.P for the fingerboard 9:06

[@lieselprentis960]

You can flush your deck down the toilet to have no deck

[@LEJIT_FINGERBOARDING]

👍

[@axelplays6887]

love ur vids

[@pwizzlesiz]

i love this video - it helped me in so many different ways, thank you!

[@definitelynotclickbait8283]

cheerios as budget wheels is my favorite

[@YippyKiaYay91]

Cheerios and resin?

[@Petropixy]

You can also use the rubber things in water bottle caps that keep pressure in as bushings

[@triparonhalt5475]

The rubber band water balloon bushings are the only bushing I usually use and if you use a pop it and a hole puncher it makes good bushings and you can do that for Lego tires and a hole puncher they all work

[@Brayden90369]

With the water ballon bushings, me and my friend were playing with water balloons and we used the rubber bands for bushings and they work so good.

[@JustNolanYT]

Are you the one who was in the vid

[@Brayden90369]

@@JustNolanYT No it was just a coincidence

[@peggyallen7868]

I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.

[@peggyallen7868]

I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.

[@peggyallen7868]

I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.

[@abulganta]

Hey @TheGripsion I really enjoyed the video but I think the person with the "hack" :heat up the board for better pop meant heat up a Teck Deck and bend the tail more up to have a bigger pop

[@TonyNL87]

I use pieces of bicycle repair patches as bushings and it makes a Tech Deck actually usable! I also clean my tech deck griptape with a slightly wet toothbrush once a week. Not too wet... don't wanna ruin the griptape. I hate it when my griptape is all dirty with dead skin cells.😅

[@brax-ch7yj]

For the heated tail you had to heat it up then bend it by pushing it on a hard object and it gives better pop

[@hazzamozza1343]

People be out here paying more money for a finger board than an actual skateboard like wtf

[@Minomaxx-78-2]

no one asked for your opinion, Bro. Why can't you be just nice. like wtf

[@zero8802]

Hell yeah, my wife seen these finger skills and blushed.

[@YippyKiaYay91]

Dude, I bet you can't even kickflip

[@LEJIT_FINGERBOARDING]

7:30 how did you get screw on trucks on a hot wheels fingerboard

[@AndyWalbert]

I know

[@bigmikeosg7753]

Great video bro, I’ve never really delved into this rabbit hole. But it looks very interesting. I wonder if there’s anyone that’s tried with their feet!?!

[@KFCVR177]

No it’s only for fingers (jk)

[@brandonteschner4880]

the deck heat up trick is for plastic tech decks. Back in my day, we would heat up the tail and nose so we can bend them, let them cool, and now you have higher kicks

[@Banayah-Gaming-Shorts]

The king always with the vids!!

[@cameronmackinnonYT]

Banger video Alex. Keep it up!!

[@nolangames736]

9:07 I think he ment heat the tail on a tech deck then bend the tail so the kicks are higher

[@thebroboards]

I think they mean putting wax on tech deck wheels for more grip

[@aidandalton944]

For keeping tech deck nuts on just put a really small drop of super glue on after putting the nut on

[@adamkendall8969]

I was the last one who he tried 10:31

[@NABproYT]

Love your vids ❤

[@gkmotors0514]

Yo I finally made it into a video!! Sweet

[@shadow_bonnie831]

Congrats

[@thebroboards]

The method I use to remove grip is… the pinch and pull slowly

[@keffylion1447]

If you use a foam sandpaper block with velcro attaching sandpaperpads you can get a nice perfect clean griptape edge and in nice single fluid strokes around the deck in a downward slight angle motion with even force and you will get the perfect edge.

[@connor7960]

Hack: To have a trunk that moves up and down very smoothly like what happens if we add so much pressure to the fb, To this kickflip. 3 fingers, middle finger at the middle, ring finger at the 4 dot thingies, index finger at the wheel. Push up. Repeat it many times.

[@hudd0media36]

Amazing video love it

[@jryangutierrez]

"griptape is actually pretty easy to get off without using some sort of method....." wtf lol. so how???

[@yongfengyang4636]

Watch the video again

[@Lncid]

Can someone help me like bruh.. alright so the problem is whenever i put masking tape on my grip tape, the griptape has some of these random lines that the masking tape took..

[@CaveJohnsonApeture]

Claim your “here in .2 seconds” ticket 👇🏻

[@KodeskG]

I use nail polish on the wheels to get grip

[@Kyle-dang1108]

The one that told you to use rubbing alcohol at the end of the video. Yuh that's my friend...i was absolutely astonished!

[@Faster-980]

Can anyone tell me what trucks he has on his main setup

[@etiennehagg6625]

i have a bunch of tech decks and i use the bushing 1 and it works so good

[@freemellyedits]

bro didn’t test my budget wheels jack 😭

[@FrostyJona]

Your so lucky to have such good beater boards and expensive trucks, im still using My First wooden board that is 32mm and really bad with not responsive trucks and non bearing wheels🙂 i love your videos! Keep it up❤

[@dirtymargeilas]

get your money up

[@billythecoolboy9119]

The rubber band as bushings i do I love them

[@takenoriakagi4325]

love your vid

[@PitUnfolded]

8:09

[@MFgaming12345]

you should try to master the nolly heelflip in your next vid

[@ZayedAldosari-g6e]

Bernie’s the tire and do it or you

[@amandarisk4380]

The heating up your board hack does work because then you can kind of bend the tail for more pop

[@vincenttester3388]

Use tech deck bushings as pivit cups

[@adamkendall8969]

Same

[@imthatsnooper]

Third one Do you know a fingerboard under 40$ Ur The best fb youtuber, keep it upp man

[@FreeLoVFX]

like a complaete or a full set up

[@Mylezfb2042]

The guy means that u can bend the tail of a PLASTIC tech deck with fire 🔥

[@jimmyryan127]

I love the video ot was so good andni will use these hacks for my fingerboards

[@blarthunder]

I tried gluing the axel, and it actually worked! It was hard to get the nuts on before gluing the axel, so if you can't manage to get your nuts on the axel just use some gorilla glue.

[@nameable-drawing4963]

The heating of the board was to heat plastic board and bend it for more steep pop

[@Merf-f8f]

Which is better a square or circle rail?

[@Nicky_Boy]

For a tech deck nuts you take a pair of pliers and squish it the slightest amount, it’s easy to overdo it so be careful. It works but it should be a last resort type thing

[@mzhum24]

Sorry I wasn't clear if u was using plastic board burn it a few min then push it up then let cool down and try

[@philslime]

this guy sounds like Aceu from Apex Legends lmao

[@gabe-canplay-guitar4119]

I never thought my fingers would ever get sore

[@stephanieholloway9471]

try using a balloon as bushings

[@Tanner-845]

I use the waterbloon one

[@Seanaceliban]

The deck go fare 😅

[@KFFishin]

Yeah

[@ahmadomarchaudhry7753]

Put in the hot water and put in the cold water then leave for 1 hours

[@Themaus1]

First i am so hail. Me. Such a banger Alex

[@keffylion1447]

Lol just leave your deck in the sun for 2 hrs grip! 😂

[@jjepicgame4092]

I’ve been using the rubber band bushings for 2-3 years

[@BradleyFresca]

Hey my name is Bradley and I just started youtube you actually inspired me to start a channel

[@JacobSteudle]

Try to make a wheel with hot glue stick😂

[@Brunoneedsablanket]

Well I’m about to put duct tape on my wheels now. Peace.

[@ChrisJohnson-r9l]

This is my dads profile,but bet you won’t pin and awesome vids❤😊

[@mahirasart]

I think now make a finger board with using paper and glass make the trucks with paper nothing that's out of steel or these materials

[@jjaycock7105]

Where can I get the 5 dollar inverted fingerboard trucks

[@DB_Gaming123]

I love your videos ! it would make my day if you would respond :)

[@lilzacxbeastmode9316]

Who is an oh fan 👇🏼

[@SHADOW0.3]

Can u please make killua's skateboard in fingerboard version pls

[@ShaneRounce]

The best hack is to shred more and git gud.

[@xman_911]

what water balloons did you use?

[@LivingRoomWorms]

💜💙💕

[@ArturoHernandez-cr7ej]

I'm pretty sure they ment alcohol prep pads

[@malinskyten96]

Light the nose of the fingerboard to make more pop

[@randomguys58]

You heat up the kicktail of a plastic board and bend it

[@JacksonAntle]

Use cardboard as bushings

[@DavidChandler-bj7mc]

Use chapstick as wax

[@Ghostops-c5s]

Y Use grip tape on the obstacle to make them not slide

[@Thetruth1234-n7n]

Onyx I put that first in the discord

[@lilgamerquitter1508]

You lnow that car graphic its on trak

[@MERAKIIgarage]

Break the fingerboard with hammer ok sooooooooooooooooooooooooooooo bye

[@davidsherlock8597]

Hiding in real harder it will go better

[@victoradriano2009]

😊

[@lilgamerquitter1508]

Teak

[@tao-g5e]

YOU SHOULD PUT WAX ON UR BOARD

[@OliverLong-vi3cc]

👇🏼 gripsion is him

[@aaroniamescua]

please stop moving around

[@melissaruth3191]

Can you give me a sho7t out

[@MeowSoupFB]

Pls pin me I love your vids so much

[@GHOSTBOY_HUN]

Yoooooo

[@LatishaGarvin-k7e]

I stil whch you im stepmother 22 2024

[@ABDULHADJIHASSAN]

Can I have free board