Beyond Nova Spray Gun Review: Avalon A-50

Merch Link:
www.spraygunsd...
RAW footage of work done by The Gunman.
This is my 2nd Channel, see below links to my pages
Main KZbin Channel
/ mrzoeystevenson
Gunman's World
/ @gunmansworld4314
Website: thegunman.net.au/
Rumble: rumble.com/c/c...
BitChute: www.bitchute.c...
Odysee: odysee.com/@Th...
Instagram: / the__gunman
Twitter: / gunmanthe
TikTok: / the_gunman_painter

[@endo3939]

Ive just checked alibaba, this gun is around 500 usd. At this price point, its just better to buy original.. :S Just got myself walcom carbonio light 360 hte for 600 usd...

[@juanmata2433]

Walcom are awesome. Got my hands on one and never let it go.

[@richardedward8046]

@@В-Доску what's wrong with the trigger? I've been looking at the Walcom myself.

[@satamanschmidt3428]

Why buy a copy when the original is either the same price or even cheaper.

[@PnwOnTour]

He said years ago no copies don’t support the thief’s but things change eh.

[@paintaddictionthagreat]

Yea… I been looking at it because I like Avalon but 485 /500 dollars is a lot for a replica supernova when I rather get a real used supernova 250-300 ish or ANI 160 or even devilbiss pro lite . I would say it’s a pass unless they cut that price Down to 200 . Anything more than 200 you can get good quality guns with more parts support , I rather rebuild a old GTI or Iwata versus buying a expensive fake

[@nickjoiner450]

Not like you to run a knock off Gunny. Is it really worth $700 aussie, seems a high price to me, get a pro lite for $100 less

[@TheGunmanRAW]

I think I mentioned in the vid, I didn't even realise it was going to be a knockoff until I got it. And since they sent it out I was obliged to do a video. I didn't even check the price, but that sounds way too expensive 😜

[@the_fomoco_man5160]

At $500 (US) seems pricey for a knock off. I'd opt for an original Supernova (if that's your gun of choice) knowing their history, and knowing a few year's down the road they still work, JMO. But always enjoy your videos, Thank you Sir!

[@konstantintop-painting6882]

Every spray gun is good depends on the users

[@sajh4280]

Beautiful gun, may be a copy but still a really nice job, which is what it's all about.. End result 👍

[@nenadstanojevic1427]

If the gun is using too much material, reduce the fan size, reduce the tip size, reduce the pressure.

[@cadillaccrow808]

I like that gun myself and you get a good build.

[@raymondhood4704]

Always comes down to who's using it

[@paulnewton943]

Mmmm I would like to see a up to date gun review. This sort of money and up. I would like to see it on a dark base too. Nice job Gunny

[@nenadstanojevic1427]

The interrupting Black Friday adds throughout this video is a royal nuisance. Can you turn them off?

[@robpearce9268]

Was that using just the 1.4 tip? I wonder if the 1.3 would of saved product.

[@mikemetcalfe1526]

have yu ever tried to use higher pressure on side panels (to avoid runs) and lower pressure on horizontal panels. thinning the paint wil reduce the amount of mils thickness applied to the vehicle. thus resulting in using less paint. there is levels to this shyt an Gunner is at the top

[@endo3939]

Wouldnt spraying different panels on a car at lower and higher pressure produce different orange peel?

[@mikemetcalfe1526]

@@endo3939 "orange peel" is caused by many different things. if you spray each paint layer smooth the finish will be smooth. you can put more smoother coat on a flat hood by lowering the pressure (won't trap air and less over spray into the over lap)and putting more paint. on a side panel you want more air pressure (less paint for gravity to pull the paint down

[@paullynch1938]

To be fair you could spray a car brilliantly with a banana dude

[@annettegaskell4871]

Think you would get a good Finnish on any gun car looks boss

[@smoggy1964]

You could paint with a bike pump and still get a good finish

[@quyuc9334]

Why that is a lot, when it just 50 usd including shiping in my country😂

[@lutra7670]

This Adapter is da hot shit !!!

[@bosshawg7427]

Flat finish aside, even for a hobbyist, the price is too high, paint usage too high, and the overspray could be less with the gun turned down, but as we all know, the flat finish appeal will more than likely be gone. All this being said, they have a whole lineup of Iwata copy guns. Perhaps theres a more affordable and efficient version, like say a LPH400 copy that performs closely for less. Still... invest in the real thing if you have the chance. Parts support is a big key to buying a good gun.

[@aamiryw9936]

Hi gunny I let go of painting for a couple of years and now I am starting to paint again what would you recommend for using for a single stage paint gun and sealer I am painting concrete trucks big jobs thanks

[@jaystheone1]

If you compare this one to ANI black, what gun you prefer?

[@jecrpalier]

Don’t like it. Too much waste on the fan. Loaded up the edges and middle looked thin.

[@angelbernal6451]

To much material and air consumption is the price to pay for a flat finish, decent spray gun ! Tanks for the review amr Gun Man !!!

[@JohnWD40TC02]

Man that gun is like a bucket with a hole in the bottom but it's a nice looking gun, liked the idea of a gun review on your Raw channel Gunny and as you say you can't fault the finish came out mint 👏👍 John UK.

[@dhaley8847]

the real super nova is a very good gun when it is set up right but it is a very dangerous gun when it is not. It will run quickly and is totally unforgiving if it is not totally dialed in. I'm sure you know what I'm talking about. I use a super nova for clear on most of my jobs but also a sata 5500 and a tekna pro lite. the Tekna is by far the easiest to use.

[@abaidhussain3316]

Definitely a copy off the super nova I have a super nova and wow it drinks more that my mates haha….

[@allanbrowne111]

Pharraway did a comparison about a month on his channel. He reckons very similar spraying and gloss.

[@asisesna7545]

Uso un pico 1,4 use 1,3 gasta menos y aga otro video con 1,3 no tenga miedo

[@johnsmith-qz4bv]

looks like a nice spray gun.....i think it would be a great spray gun for the home diy guy

[@aamiryw9936]

Very nice paint job love your reviews big fan

[@Vipppala]

time to pack your bags gunnie, 2 cases of "Omicron" in AU, another lockdown coming very soon sadly.

[@TheGunmanRAW]

Yeah, I know. It's a pity, there's lots to like about Melbourne. We're going to wait and see what happens for now. I hope they can just keep it out.

[@e.7887]

What number pps adapter is it gunny

[@paulforsythe2325]

Thank you for your honest review.

[@carlosgouveiapintorauto3643]

Nice gun!!! Top clear😉🤙

[@kdcarservice]

Nice spray paint finish gun

[@damincobozeman4114]

What brand of clear is that your using in this video? it's laying like glass and super wet! Your a beast in the booth Gunny

[@TheGunmanRAW]

It was PPG LVC-136

[@damincobozeman4114]

@@TheGunmanRAW what's the best clear you ever sprayed as far as glossy wet looking and uv protection

[@sonoto2695]

Not age vs SaTA

[@edilsonaraujo1118]

Avalon copied the w 400, it turns out to be very good.

[@user-Barsik...555]

what's good? everything is terrible there

[@allanfolkes6019]

Try the 1.3 tip

[@IPHONEhn504]

what a beautiful piece of equipment almost cloned to a iwata

[@user-Barsik...555]

this shit 💩💩💩💩💩will never be like 😘iwata.

[@juliogamba6451]

👌👏🇧🇷

[@radudanielman]

👍👍👍

[@ignatmeloman5765]

Hey! Big request to you, make subtitles in Russian! You have interesting content, but I don't understand anything (

[@bidstealer]

With all spray guns the grass is always greener, Sata, Devilbiss , iawata , if your fellow painter is getting great finishes with an iawata and you are not with your gun of choice, don’t go and buy an iawata, learn how to use your gun of choice, they are all good guns.

[@juniorizq2342]

Sell it to me

[@TheGunmanRAW]

If you want it I will. Email me at [e-mail]

[@ricardo436]

This pistol is exceptional and is not a copy of the supernova. See what an excellent job she was able to do. I loved the end result of this work. We have to understand that it is a new proposal and that with time it will go through evolutions. However, it is an exceptional purchase option.

[@excavator31]

...Who cares if it costs $500 when you can get a finish like that... That is outstanding, and isn't that what it's all about.? ..Imagine if he sprayed the base colour with it..??

[@androgarage1266]

Как всегда лучше всех привет из России 🇷🇺