Microzone MC6C + MC7RB unboxing and tutorial for beginner | best cheap for beginners

Transmitter feature explanation for beginner.
Transmitter Specification:
Transmitting power: ≤70MW
Fine tuning: digital fine-tuning mode
Rocker: 80%~120%
Controlling range: ~500m
Voltage: DC +6V
Weight: 550g
Receiver Specifications:
Frequency band: 2.400GHz~2.483GHz
Linear distance:＞800m
Voltage: DC 4.5~6V
Signal: PWM/SBUS
Antenna: inside the receiver
Bind method：
Dimension: 45 x 45 x 10mm/1.8 x 1.8 x 0.4in
Weight: 9.6g
Thank for watching,
The H Lab.

[@youtub3rwm482]

great video helped me a lot. I just bought one of these 😄✌️

[@nelsonasenjo2511]

Thank you very much, too easy to set the control for beginners. Thank you very much again

[@TheHLab]

Glad my video is useful for you :)

[@muhammadadityarayyan2378]

What kind of cable to use it as a simulator controller?

[@jacobstrife2939]

I have a f163 wolf helicopter but suddenly remote control is broken because a battery acid damaged..this remote is compatible to my helicopter for replacement?

[@muhammadadityarayyan2378]

Tell us how to connect it to a phone and laptop please

[@natepotate5025]

what's the difference from Right-MC7RB and Left-MC7RB?

[@FayeVFalco]

It is 800 meter distance

[@TheHLab]

Yeah. In theory, but I haven't tested yet

[@nhutu2789]

@@TheHLab q

[@CashJohnston]

So how do you reduce the max speed for auto/car type ?

[@kaylamcdonald600]

Can u please twll me the first 2 wires you are putting into the reciever? What they are ? I have this controller and reciever and am not sure what the wires are your initially connecting...cheers

[@TheHLab]

That is 5V power supply for the receiver.

[@Snail641]

Thank you

[@Patrick-wn6uj]

life saver

[@Mrparodingo]

Hello, thanks for the video ! I'm a total newbie, do you know how to connect the controller to the simulator with that simulating port ?

[@chrispallier6967]

Bonne radio , fonctionne parfaitement .Merci

[@chrispallier6967]

@Simon Zhu oui tout à fait !

[@colinwessels7400]

How do you set the transmitter to bind mode to bind to a different type of receiver?

[@ninjafishing7120]

I was wondering if this remote can make the motor spin counter clockwise using any button with throttle . I want to apply for my boat which i like the lock throttle fucntion . But i also would love to make it reverse (CCW) and Foward (CW)

[@lennartekdahl8298]

not brushless motors

[@lennartekdahl8298]

get a FRW and REW speedcontrol ESC

[@oswelbaltodano6439]

Hl y para enlasar el simulador como es

[@enachelucianadrian]

Very good. Do you know how to reset the center point? Or it resets when you power off? I have counted 24 steps so to center i can count 12. This is for first install of servos.

[@TheHLab]

Beep sound at center point is differ. Center point will not reset when power off.

[@oswelbaltodano6439]

hl que tal podrias aser un video tutorial de como enlazar cln el receptor es que no me da la señal para ensender almenos el motor y almenos un servo y nada ayuda xfa

[@didiersannier3388]

Hello, can we connect a 5v dc motor regulator to the receiver?

[@meareAaron]

can you use this controller to controller other flight controllers? or does it only work with the one included in the box?

[@teguhzakaria8345]

Can use this for rc cars?

[@TheHLab]

Sure. But it's a bit hard to control than a car controller (like Flysky - FS-GT2E)

[@teguhzakaria8345]

@@TheHLab do you have a video tutorial ?? I want to try....

[@TheHLab]

Yes. I have here a tutorial for making a rc car from die-cast car using MC6C: kzbin.info/www/bejne/aJm8laCVrt2nnK8 (if you don't have an ESC) and another demo with ESC here kzbin.info/www/bejne/noqnpYpobqeHeLs

[@syariffaripin4070]

sir, how to turn on/off gyro on 7ch receiver?

[@Username-ge2ce]

Hot to reverse sett all receiver and rebinding

[@matyie5982]

Hii.. can ch1. Ch2.ch3 n ch4 forward n reverse 360 degree. What type motor servo u used... Is it 180°or 360°. .. i would apply for turret movement.

[@TheHLab]

Yes. CH.1 to CH.4 can work with both 180 and 360 degree servos (forward & reverse). In my demo, it's a 180 degree servo.

[@TheHLab]

I have a video about camera car, in that video, I've used two 360 degree servo to control an arm with camera on it. It may similar with a turret. search for that video on my channel

[@bachminhtai3967]

How to bind tx mc6c.pls!

[@xoxo-zv6ri]

Is it the right hand or the left hand? I want to buy there are two options, I don't know Please answer

[@TheHLab]

throttle is in the left hand

[@xoxo-zv6ri]

Ok thanks

[@enachelucianadrian]

@@xoxo-zv6ri be careful. You can find right and left handed. When you see right handed it means the throttle is in right side.

[@xoxo-zv6ri]

@@enachelucianadrian ok thanks for telling

[@giangenova152]

Va bene per i droni grazie mille

[@MacacoDigital]

1km 💪

[@iR_techknology]

Where avelable

[@machineautomationandplcser8456]

Do you have a M-Bus Protocall detail or not 9600 8 non 1 or what I want to mapping with PLC

[@TheHLab]

Hi, I don't know much about PLC.

[@ScaleModel-KH]

Hello friend, about channel 5, can we use it to control 360 degrees servo or brush motor with ESC?

[@TheHLab]

Yes. You can. The diff vs ch.1, 2, 3 and 4 is you only have 3 state on CH.5: 1000, 1500, 2000uS instead of various value from 1000 to 2000. So you brush motor will only able to run “max speed”, “stop” and “max speed reverse”

[@ScaleModel-KH]

@@TheHLab thank friend. So I don’t even need to have ESC for the brush motor right?

[@ScaleModel-KH]

I plan to buy a TX double mid-hand to build my bulldozer for 6 channels. Ch 2 & 3 will control the track crawlers. Ch 1 to control the rear ripper lower & rises. Ch 4 to lower & rise the front blade. Ch 5 to tilts forward & backward front blade. Ch 6 for lights. Is it ok for this TX double mid-hand friend? Thank for your advice 🙏

[@BarnabasReszketo]

Where did you buy?

[@TheHLab]

I bought it from online shop. You can buy it from aliexpress.com

[@justinbogard6700]

I'm getting a 3 axis gyro and I have flaps so I was wondering if you would set the gyro to channel 5 and the flaps to channel 6?

[@TheHLab]

Hi, I have not much experiences in RC plane but channel 6 only have 2 level so I think it's not detail enough for flaps. channel 5 with 3 levels maybe better

[@justinbogard6700]

Ok thanks

[@world_OF_life_]

Can i know where i can buy simulating cable for this?

[@TheHLab]

I haven't try the simulation yet. But i think you can search for online, ex: ebay.com or aliexpress.com

[@khalilamir1874]

where is the s-bus port from the receiver?

[@TheHLab]

The last one, with text M.BUS

[@fixfix6815]

​@@TheHLab So it works on sbus or mbus?

[@suelloasoy2466]

how to reverse the rotation ni brushless motor

[@InaMopar]

Swap any 2 wires in the motor cables

[@erubieljuarez8972]

No pude hacerlo funcionar

[@CRUSH_SHOTS]

FRAUD company fake claim I bought mc6 mini it says connect to pc for simulation by aux but nothing hapoens my money waste

[@MonirulIslam-ts6cd]

Can i use 3s battery

[@TheHLab]

Usually people power the Receiver by the ESC so the it more depend on the support Voltage of the ESC. But if you don't use ESC, as I remember the voltage range is around 3.5 to 7.4V, so it should not be used with 3s battery.

[@loddude5706]

What a pity the human voice is so abhorrent, far better to waste the audio saying nothing.