THE THRILL OF SPEED - Test Running the kOLM 230cc Inline engine

[@thelightersideofrc]

Support our creative efforts here: Our Patreon Account: www.patreon.com/thelightersideofrc

[@textrophyman]

WOW!!!! That is soooo flippin KOOL....Video has been over for almost 5 minutes and I'm still smiling.

[@thelightersideofrc]

HAHA! I understand, I'm still smiling days later!

[@mrmikerc1]

I can say it's awesome I seen that before i'm 73 years old out of the hobby for 20 some years And I see this stay and it just blows my socks off Thanks for sharing this video

[@thelightersideofrc]

Thanks for watching Mike! It’s quite an amazing piece of kit for sure!

[@sheldoncampbell538]

Hey there! The abbreviation mm Hg means millimeters of mercury. Mercury was used in the first accurate pressure gauges and is still used in medicine today as the standard unit of measurement for pressure.

[@thelightersideofrc]

Thanks Sheldon!😎😊

[@Iowa599]

mmHG is used for blood pressure… 51.7mmHg per 1psi Below 120/80mmHg is normal (2.32/1.54psi) and above 180/120mmHg means you're probly about to die (3.48/2.32psi).

[@chippyjohn1]

@@Iowa599 people stopped using pounds and inches about 100 years ago. PSI is obsolete.

[@Iowa599]

@@chippyjohn1 no it's not. IE: tire, boost, oil, etc…

[@chippyjohn1]

@@Iowa599 tyres, not tire. Society has been using bar and pascal for a long time now as the standard. Every country with education is taught this.

[@vtecro1826]

Jim Sim. My dad was a pilot flying all the top british planes 1942 ...1945 plus when he came back on leave he would do a low pass over my family's farm and shake up things up a bit my mother said the sound of his plane was one of the best things she ever heard .this small engine 230 cc deserves the accolades when you consider his tempest my 5 was 37 litres and close to 3000 horse power ...

[@thelightersideofrc]

WOW! Cool stuff! Thanks for sharing!

[@Logan_gamble]

Awesome. Great video. Love your engine testing videos. I’m a Rc car guy but I used to fly I’m also an engine builder and auto technician so this is my bag. Keep it up.

[@thelightersideofrc]

Thank you very much! Thanks for watching!

[@Gavs_rc_hobbies]

That thing sounds absolutely mint. 👌🏻 Can't wait to see the model finished and take flight. 👍🏻

[@thelightersideofrc]

So SWEET! Should be a fun build!!!

[@andrewmagro7703]

I could watch and listen to that beautiful scary awesome engine ALL DAY , man that sounds great and the power is on tap purrs like you cute little putty cat thanks for sharing will definitely be watching this awesome build 🙂

[@thelightersideofrc]

Thank you and thanks for watching!

[@donaldvantongeren8385]

I love your enthusiasm! Think that’s what the common dominator within this hobby….

[@thelightersideofrc]

Thanks very much 😊

[@neknadroj1]

When you test unknown engines always wear safety glasses, your eyes are priceless 🤯🤯🤯🤯🤯 anything could happen, it's not worth the risk 🙂🙂🙂🙂🙂

[@thelightersideofrc]

🙌😎

[@avipatable]

Man that is magnificent. Such a great sound.

[@thelightersideofrc]

Oh I know hey! I’m still smiling ☺️

[@nipmuck2]

WOW!!! That's a Beast! 😮😮😮 Can't wait to see this build! Keep up the great work! 😎

[@thelightersideofrc]

Thank you and thanks for watching!

[@iamtedg]

Wow! Unbelievable! Probably worth more than all of my RC stuff combined!!! Sure sounds good. I hope to hear it in person sometime!

[@thelightersideofrc]

Thanks Ted! It's a very cool piece of kit! I'm still smiling!

[@michaelbochenski6299]

Great engine . Nice to see your talent . Congratulations on your work, shop and enthusiasm.

[@thelightersideofrc]

Thanks Michael! Yea it's hard to not smile with this thing! Thanks for watching!

[@FlyinTomcat]

That engine is insane!!!! You're right too, that thing is a little scary when you put some gas to it. On the second startup it looked like it wanted to fly off the back of the truck....LOL! Great video!

[@thelightersideofrc]

Thanks Tom. Yea it was bit scary for sure!

[@gunnarganz1130]

Wonderful!It is great! Greatings from Germany!

[@thelightersideofrc]

Thank you!😊

[@popduce1024]

That's going to be an awsome build. Looking forward to watching you work.

[@thelightersideofrc]

Thanks Very much! Looking forward to it Too!

[@sloopbollocks5466]

Sounds fantastic; looks awesome!!

[@thelightersideofrc]

Thanks!

[@remicallant8756]

That will be an awesome engine for this aircraft, so cool running, unbelievable nice, congratulations and success to let this airplane fly whit that engine, I am looking forward to this project, greetings from Remi 🥰

[@thelightersideofrc]

Thanks Remi! She will be a sweet bird! Thanks for watching!

[@michiganengineer8621]

I remember pretty much everyone used to put a pressure tap into the muffler/tuned pipe of their RC engines to pressurize the fuel tank(s). The advantage of using a pressure tank I guess is that you don't need to prime the engine to get it to start. Those Kolm engines are amazing!

[@thelightersideofrc]

Yea should be nice a reliable! Also simple!

[@shelbyseelbach9568]

LOL. You still need to prime the engine. The pressure nipple only provides pressure to the tank when the engine is running. Not to point out the obvious, but...........

[@shelbyseelbach9568]

@CRASH ALEXANDER I can see how both are required, and your wording was accurate. I'm man enough to easily say that. No big deal. The exhaust nipple itself wouldn't supply fuel to the motor without the flexible pick up and the flexible pick would do nothing without the exhaust nipple. You got me, buddy. LOL. The mind can be a tricky thing early in the morning! Edit. I even went ahead and deleted that comment, maybe that'll help you can down. We don't need any blood pressure incidents. It's just KZbin. You'll get over it, I hope? 😝😋😛😘

[@shelbyseelbach9568]

@CRASH ALEXANDER Yes, I read your post. I added the explanation that the motor won't provide pressure until it's running. Is that not okay? Should I have asked permission to explain a little further? It is a public comment section, after all. Isn't it? I could be mistaken again, I guess? WHY ARE YOU SHOUTING ABOUT EVERYTHING? It's not that big a deal, my friend. Take a breath, drink a Bud Light, and calm down. It'll be okay, I promise you. 🤪😜😘

[@Dreddip]

​@@shelbyseelbach9568 😂😂😂😂😂😂

[@zingerdwarf2111]

I kept waiting for the truck to move, you should try, also saw you standing right where you said you shouldn't a couple of times. Remember, safety first.

[@thelightersideofrc]

🙌

[@helischorsch9786]

What a cool engine 👍👍👍…love those Kolm inliners 😎🐈‍⬛ cheers from Munich, Sven

[@thelightersideofrc]

Thanks Sven! YES! Such a sweet machine!

[@ramonmedina1974]

Ohhhh my Gooo.....Awesome😍 Nice vid mate!

[@thelightersideofrc]

Thanks Ramon!

[@charlestreadway6491]

As a retired Auto/Diesel mechanic, and long-time RC plane flyer/builder, this engine is so COOOOOOOOOL!

[@thelightersideofrc]

Totally Charles! I'm still smiling day's later!

[@daleyahnke7215]

that is nothing short of amazing!!!! Thanks for sharing this! Cant wait to see it in the air!!

[@thelightersideofrc]

Thanks Dale! She is going to be a hoot!

[@paulbickley658]

Cool video, i would use white tape or paint to end tip the blades. It will look much cooler to see in the end.

[@thelightersideofrc]

👍

[@yf222000]

Wow! The sounds is super cool.

[@thelightersideofrc]

Thanks! I'm still smiling days later!

[@ryankephart8325]

I can't wait to see the build of the Strega. My uncle has the original P-51 from CARF and hoping we can modify it to fit one of these big boys. Scale 4 blade prop with electric start...... What a dream!

[@thelightersideofrc]

Coming Soon!

[@merylpelosi8485]

Great little engine! I'm doing something similar to this with an old H-1 Kawasaki 500 triple using a jackshaft gear reduction for the prop drive. I've flown my 1/3 scale Kawasaki Ki-61 7 times now with this powerplant. Waiting for new Lectron carbs to show up.

[@thelightersideofrc]

Nice! That sounds slick!

[@rm25088]

Damn I have always wanted one of those motorcycles.

[@PiotrGulczi]

Hi there! How do you secure ball joints on the rod? I see some red sealant or glue on every connection. Can you tell me what’s that? 1:38

[@thelightersideofrc]

The red stuff was from the kolm factory. For the other ball joints they are a friction fit?

[@gregmcgee4430]

Been waiting to see it!

[@gregmcgee4430]

Awesome!!!!

[@thelightersideofrc]

Crazy Hey!

[@herricmountain]

Wow! Amazing sound and love the starter motor, my shoulder would love it. As a side note please be careful with prop engines not to stand in front of it always best behind (not sure where you were when camera was shooting from the front). Keep it up always an enjoyable video to watch learning new things still.

[@thelightersideofrc]

Yea it's just stunning! Such a beautiful piece of kit! Thanks for watching!

[@jordancoleman2402]

Good advice 👍 I'm sure he has no idea what he's doing.

[@atlantaperimeter]

smart approach, nice clean shop

[@thelightersideofrc]

Thank you!

[@Tom_Emody]

I subscribed because you are enthusiastic and I can tell you are a sweet person. It’s good to see you ! …Tom

[@thelightersideofrc]

Thank you! 😃

[@christiangough6318]

Awesome!!! Can't wait to see the finished Strega!

[@thelightersideofrc]

Thanks Christian! Should be a pretty trick kit!

[@dazhigh9208]

🙂 Brill top notch dude looks and sound EPIC. 🙂A pair of them in a DH Mosquito would be EPIC. Cheers Dude from Me and my Dog Max in the UK. Peace out and stay Sunny side up

[@thelightersideofrc]

Couldn't imagine a pair of these on a plane! That would be bonkers!

[@JohnColgan.]

Jice piece of engineering. Genuine exhaust note. Great test rig, nicd & strong. I would put a mesh cage there too just to save accidentally chopping hand/nose, in-laws !!

[@thelightersideofrc]

Thanks John! Beautiful piece of Kit!

[@XY_Dude]

Don't want to sound ignorant, but the prop does not look like it would challenge that hunk of a mill too much!

[@thelightersideofrc]

Oh the prop can be cranked up to crazy pitch numbers to be a challence. It's adjustable.

[@gregcameron9953]

That's an amazing engine, I want one haha. can't wait for the build and maiden to hear it perform. 👍👍

[@thelightersideofrc]

Thanks Greg. So True! Such a beautiful piece of Kit!

[@victorrcjets7660]

Does sound immensely beautiful 😮

[@thelightersideofrc]

Makes me grin from ear to ear!

[@rodneyburrell207]

The Jazz! Nice Touch!👌🏾👍🏾

[@thelightersideofrc]

Thanks Rodney! Always trying to improve!

[@rodneyburrell207]

Keep up the "GooD" Content My Friend!🫡

[@zdog90210]

ok I'm totally new to this and this thing is crazy! How crazy is the plane/boat this would go in!?

[@thelightersideofrc]

HAHA. Coming soon! When you see what it's going in, you won't believe that it fits!

[@GottaKnowJoeHobbies]

This has got to be one of the sickest engines in the world . I can think of soo many things I could nlmount this to so many applications and then I can think of all the airframes it would pull the paint off of. The Ghost p51 is the best sounding plane I've ever heard can't wait to see yours. Gotta know joe hobbies .. joe

[@thelightersideofrc]

Thanks Joe and totally agree! The engine makes me smile! The plane is going to be nuts!

[@chrisbiddle6443]

Can’t wait for this build awesome 😮😊

[@thelightersideofrc]

Thanks Chris. She will be a pretty dang cool build for sure!

[@leebenson4874]

Two of those babies in a big P-38 would be Awesome.

[@thelightersideofrc]

Oh my gosh yes!!!!

[@dazhigh9208]

dude i agree 1000% but as im british gotta change it to a DH Mosquito ;-)

[@martinj9251]

Really looking forward to this build, that's some engine! 🏁

[@thelightersideofrc]

Thanks! Totally agree! Still smiling from running it!

[@enginediy]

Awesome

[@thelightersideofrc]

Thanks!

[@albertshilton5336]

Amazing. I want to build a 1/4 scale Dehilland Beaver with an engine like this. Or better yet a radial engine. Do you know where I can get a one?

[@thelightersideofrc]

Moki radial. There is also another company that staarts with a V that is also a great option.

[@badbilly1083]

Strega & Dago Red were so dominant at Reno!!

[@thelightersideofrc]

😎☺

[@michaelreed9805]

Beautiful sound! Wow

[@thelightersideofrc]

Thanks!

[@FilosophicalPharmer]

Ridden motorcycles 30+ years. Taught motorcycle skills for two different schools. Yes!! I love the sound of that engine! And the correct sound comparison is a 3-cylinder Triumph. 👍🏼☺️

[@thelightersideofrc]

Nice! Thanks Blair!

[@FilosophicalPharmer]

@@thelightersideofrc Favorite sounding motorcycle I ever owned was a Triumph Trophy 900 with a Yoshimura exhaust. Such a sweet asynchronous rhythm and tone. Looking forward to following along with your build! 👍🏼

[@RubyS.1]

That things ALOT bigger than some of the ultralights at our field. And way nicer. Happy your doing a prop plane

[@thelightersideofrc]

Crazy Hey! It's such a cool engine and Will be a fun aircraft!

[@stacyp4534]

That sounds so good!

[@thelightersideofrc]

Totally Hey! Days later I'm still smiling!

[@Axr24have]

The prop torque must be ginormous! Re the sound of a kolm engine, listen to a Merlin. It is creepy how much alike they sound. This will be fun build to watch. Thanks for putting it on!

[@thelightersideofrc]

Thanks John! Yea when I was behind it and throttling it up it was moving a TON of air!

[@northnik]

Wow!! Very impressive!

[@thelightersideofrc]

Thanks Nicos!!!! I agree!

[@olddogg60]

Oh Oh! I think that I'm in love with that engine. 😁

[@thelightersideofrc]

I know hey! It's hard not to be! So Dang Cool!

[@richardbriansmith8562]

Awesome Video

[@thelightersideofrc]

Thanks Richard!

[@stanleydsouza6723]

Fabulous 👌 Fantastic..Rodger

[@thelightersideofrc]

Thanks!

[@Apodalont]

That is a beautiful beast! I'd almost buy one just to have and run it.

[@thelightersideofrc]

HAHA. Well it sat as a center piece on my table for months! I was quite comfortable just keeping it there.😂

[@Apodalont]

@The Lighter Side Of RC who needs magazines on the table with a 230cc monster sitting there?

[@thelightersideofrc]

Haha. Exactly!

[@clarkstonguy1065]

Seems like getting cooling air to that rear cylinder could be a bit of a challenge. I am not at all familiar with these engines, but seems like some kind of shroud assembly inside the cowl could be a good idea. I probably would have even drilled a few outlet holes in the backwall of the engine test stand right behind the rear cylinder head for the test run.

[@thelightersideofrc]

Great eye! Yea the cooling system is very well thought out by the Airplane Manufacture it's going in. Very specific to this engine.

[@davidmuse7004]

WOW, I have been waiting for this video from you. That is one fine piece of work, and a great sound. What is thee thrust output of full throttle? The grin on your face is worth a thousand words/ or more. .lol Thank you for the video and sharing!! Muse

[@thelightersideofrc]

Thanks David. Not sure. Never got above 3/4 for any length of time. Based on the amount of air moving it it will be fast!!

[@mikewilliams7993]

That is a racer for sure. If the exhaust is turned to the rear is their usable thrust?

[@thelightersideofrc]

Oh Yea! I don't think it would factor in much.

[@MrBurnsakaRWall]

Hope you show tuning . Fly gassers. Never tuned multi carburetors.

[@thelightersideofrc]

Hello Renie. For sure.

[@Americal1970]

A added bonus...... Pusher pick-up truck...! Nice engine.

[@thelightersideofrc]

Yes indeed!

[@robinsareolas]

I have the 155 for a Carf Spit and I’ve yet to fire mine up. Sweet engines indeed!

[@thelightersideofrc]

Nice Gary! Your in for a treat!

[@Make-Asylums-Great-Again]

The blades are beautiful.

[@thelightersideofrc]

Thanks! They deserve respect for sure!

[@bluecordterrainmanagement]

That's a good sounding engine. The first time I heard one was in a large scale Spitfire and was the closest thing I'd heard to a Merlin engine in a model

[@thelightersideofrc]

Yea I'm mind blown for sure! Still smiling!

[@tahirusman5929]

Paint the prop tips either white or yellow for visibility/safety…..

[@thelightersideofrc]

😎😊

[@blankblank9117]

That's a whole Lotta engine indeed!

[@thelightersideofrc]

Vroom Vroom!!!!

[@ThomasDoubting5]

Big ole beast, subscribed the klom engine sound lends Very well to scale warbirds .

[@thelightersideofrc]

Such a cool engine!

[@ThomasDoubting5]

@@thelightersideofrc without doubt very cool , I just hope RC engine technology gets to making flyable scale V12s

[@rb75361]

Hi, which hub - propeller are you using? Could you share the pitch template? I did buy the same engine and I have the Soloprop hub but they stated that could not be used with the Kolm IL230. Thanks.

[@thelightersideofrc]

All of the parts came from CARF. Is a Vario prop but with the center portion removed. So each blade is adjusted at the tip independently using the wedge. Shoot me an email and I can give you the template dimensions

[@rb75361]

@@thelightersideofrc Just sent you an email. Thanks.

[@wearemany73]

Ohh Jeez! I remember this being delivered. This is well into the crossover between model and manned aircraft engineering. No doubt this would get a paramotor or ultralight airborne. These things sound great too. 🤔(so I’ve heard) edit: That DOES sound good! grinning like a big kid, love it. 😊

[@thelightersideofrc]

HAHA. Such a stellar piece of kit! Day's later i'm still grinning!

[@FilosophicalPharmer]

Was thinking the same thing! Imagining some sort of winged thing I could fly! 👍🏼

[@Oznz-m5c]

Go on flick start the sucker....use to do 10cc Rossi's on glass fibre props (razor blades).

[@thelightersideofrc]

🙌😎

[@maverick4220]

That's so cool, I got to get me one of these and build me a custom reaper drone with a working 360 camera with night vision and FLIR

[@thelightersideofrc]

Thanks! Yea it's a pretty unique engine! So much fun!

[@stevemorgan5684]

Very nice!!

[@thelightersideofrc]

Thanks Steve!

[@gregoryh4601]

Hello Jonathan. That had to be sweet to hear it Run. Will you be able to Fly it after you build it? Ever think of Getting a Mustang to replace Diamond Jet? I know it not be the Same but a P51 Mustang with a Kolm V4 be Awesome sweet. I still think a Mustang Fun Raising be Sweet and let Fans help you out. Ever other KZbin have Fans help there Build.

[@thelightersideofrc]

Thanks Gregory! This was fun! Yea it will be living at the shop and we will have the pleasure of flying it!

[@HawkerFury]

Superb 👍👍

[@thelightersideofrc]

Thanks! A real joy to test run this!

[@rayemigh3776]

your right it is NUTS but dude it sounds sooooo nice cant wait to see it fly

[@thelightersideofrc]

Thanks Ray! I'm looking forward to it as well!

[@gregucho969]

Looks like it would be great for ultralight, or a hovercraft. Obviously, several other appications as well.

[@thelightersideofrc]

Oh yea! Quite fuel efficient as it's a 4 stroke. Gobs of power!

[@justinm1150]

WOW thats huge prop and engine

[@thelightersideofrc]

Heck yea! She’s a monster!

[@reckemroysrc3764]

That sounds amazing. Can't wait to see the maiden of the Strega 😊

[@thelightersideofrc]

Thank you! Hopefully soon!

[@airmeng]

Awesome machine

[@thelightersideofrc]

Thanks Gordon! Agreed! So Dang Cool!

[@vypertiger]

Woo hoo! Still cant believe i won something. Your awesome dude!

[@thelightersideofrc]

Shoot me an email with your shipping info!😎

[@vypertiger]

​@The Lighter Side Of RC i think i got it sent.

[@shropshirehistory908]

About two months ago I had the same engine in my mk1 Hurricane…now all I’ve got is the control box….and no, I didn’t crash it!..I took off for its maiden flight I did couple of test runs did some flybys…while pulling up from one fly past we don’t know what happened as we can’t check lol but we think the battery slipped and pushed the wires out as I lost all control and my mk1 hurricane just kept climbing till it disappeared through the low clouds…to never be seen again 😔….yes very gutted!

[@thelightersideofrc]

Oh my goodness that's brutal!!!!!

[@shropshirehistory908]

@@thelightersideofrc yeah I’ll be honest I nearly cried…worked my ass off to buy the hurricane a mick reeves mk1 with an 80” wingspan…then had to save for a few months for the engine…..I had the plane about 8 months from the start of the kit build…I had the engine 3 days…..it’s disheartened me to be honest it’s a lot of money to lose, don’t know if I’ll buy another.

[@rafaeltorres2886]

Omgoodness look at the size of it, what size scale would that amazing wonderment fits into?

[@thelightersideofrc]

It's going into a 1/4 Scale Reno Racer!!! Going to be sweet!

[@rafaeltorres2886]

@@thelightersideofrc I can't wait to see the maiden.

[@alric9562]

That is some sweet sound my friend. Way better than a Harley D. 😉 😂 Hey, that place looks like area 61 where the Diamond was first flown. 😉 😄

[@thelightersideofrc]

Thanks Al. She is jaw dropping for sure! I love going out front and seeing a whole lot of nothing!

[@Sluf7]

What a sound just Magic that build vid series gonna be good one. Are you going to run the exhaust out through the scale exhaust. Keep at now. ;0)

[@thelightersideofrc]

Thanks Nick. She is such a beauty! Yea we will keep the scale exhaust pieces and have the actual come out of one of them.

[@Rlip]

Looks nice for an rc engine

[@thelightersideofrc]

Thanks Shane!

[@bunnykiller]

mmhg is the unit of pressure of millimeters of mercury, the most common use of this pressure is for blood pressure, the ubiquetious 120/80,

[@thelightersideofrc]

👍😎

[@scootergem]

Strap that rascal down, mucho power. Be safe. Sounds great, not nuts 😄👏👍

[@thelightersideofrc]

Haha. No kidding! She’s got gusto!

[@wrstew1272]

Truck in neutral, plenty of room, giver! Please remember to stay away from the prop- both front and sides. We want to see more videos!😊

[@thelightersideofrc]

HAHA.. Thank you!

[@RangoliDesigns-jg8mw]

Hi , make a video on this jetcat p400 pro, and give me your review and how much trust this is turbine giving tell me in your video ❤

[@thelightersideofrc]

🙌

[@MrZemper]

Great video, thank you very much, I would love for you to give me the necessary advice for when the time comes for me. In May 2020, he bought Thomas a kolm 230 v4 identical to his, and now I'm behind the strega like his. the kolm instructions are very scarce and perhaps you could give me some advice. For now, how can I re-prime the engine with a pump? Or better with a second empty tank? is the engine carbureted? Is there a manual? any exploded diagram? etc As for the streha, is it necessary to buy the support kit for the kolm? is it possible to make it at home? Thank you very much, I love your videos. And if you can inform me more about the matter, I would be very pleased. greetings.

[@thelightersideofrc]

Thanks Dantes. Kolm Manual available on their website. Also if you look at their Facebook page there are some pictures of the pressure tank setup. For the Strega I would for sure get the support kit from CARF. Of course you could make it at home but why not just get the kit and save some work/engineering.

[@MrZemper]

@@thelightersideofrc Thank you very much, it helps me a lot, I'll let you know👍🏻👍🏻

[@LCMNUNES1962]

PERFEITO 👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 🇧🇷

[@thelightersideofrc]

😎

[@svenpeleman4105]

Great backup engine to park your truck in the garage when you run out of gas 😀

[@thelightersideofrc]

HAHA. No kidding hey! Thanks Sven!

[@millerrc5829]

Nice engine, would sound even more aggressive if you took that exhaust off and just did straight pipes but it is quite a bit louder. Neat engine though would love to own one someday.

[@thelightersideofrc]

Thanks! She's a beauty for sure! so much fun!

[@josephpsmithe]

That starter motor is nuts

[@thelightersideofrc]

Yes! And so much fun starting this thing remotely!

[@spinnetti]

Bigger than I remember!

[@thelightersideofrc]

She's a beast!

[@randie450]

Cranking speed of the starter is amazing.

[@thelightersideofrc]

Totally! It's got some push!

[@UltraMagaFan]

I love nitro airboats. I want to put one of those engines on a scaled up aluminum Dumas Swamp Buggy. That would be insane.

[@thelightersideofrc]

HAHA. No kidding Jake!!!