How to make a Belt Sander Grinder Band Tungsten sharpener

Plans mto my projects
madebythemetalist.etsy.com
New Video Sheet roller: • How to build a DIY She...
My Welding Table: • Welding Table Build wi...
Simple, small belt sander for Metalwork. I used a bessey spanner for the quick change system, works really well. The function with the diamond grinding wheel for tungsten grinding came to me during the construction itself. I drilled all three holes so that they are always ground to 30 degrees. I pretty much always use the same angle. The collection container is not perfect, but most of it is caught. Of course, the best would be a suction for the fine dust.
Hope the video has inspired you for your own projects.
Plans for My Welding Table:
www.etsy.com/de/listing/94377...
Plans for My sheetmetal bender:
www.etsy.com/de/listing/99802...
Plans for Sheet metal roller:
www.etsy.com/your/shops/me/li...

[@tomsdreamshopworx]

Very impressive! The design, the construction, the video editing, all top-notch!

[@TheMetalist]

Thanks a lot 😁👍

[@grumpyone5963]

I’ll second that.👍

[@jamesbarisitz4794]

Glue some neodymium magnets to the grinders catch box. Get twice as much crap off the clean out. Slick build, and the rod sharpening setup is wicked! 👍

[@DavidR8]

Genius use of a DeStaCo clamp!

[@rajanmachinetools9001]

Very nice. This is simple & easy to make I have seen. Thanks sir.

[@K3Flyguy]

Outstanding video! Thank you for sharing this.

[@edwinthomas618]

You are an artist and engineer. got me hooked to your channel

[@dwainbaker1748]

Love this. I have been looking for a design like this

[@barrylinkiewich9688]

I've got a big 2x72 grinder but I keep feeling myself being drawn to something like this. The big beast is a great machine; dead stable and absolutely slays metal but it is BIG, loud and it's hard to justify using it just to bevel 3" of a small part.

[@haf-oq3vt]

Very fast and clean❤. I like to make one of this belt sander.

[@GAIS414]

I built a similar solution for my tungsten grinding, just bolted a diamond wheel straight to the stone. But I put in a pipe straight out from the axle to connect the shop vac.

[@catgynt9148]

Thanks for sharing this insightful video. I’d add a rare-earth magnet to each of your spark containers. This video has given me some ideas on repurposing an old bench grinder. Wishing you and your family a blessed week, gentle weather and restful evenings. Peace

[@TheMetalist]

Awesome idea 💪 Thank you 😁

[@Thewatson77]

Very well thought out design 👌🏼 I’ve wanted to do this to one of my bench grinders for the longest time lol. Thanks for another amazing video!

[@TheMetalist]

Thank you 😁 awesome

[@alanhiggins2928]

When I get a fully set up metal manufacturing workshop with all the tools, I might try to make one!😃

[@andreashabijan2514]

Die Idee mit dem Bessey Spanner ist großartig! Jetzt noch einen günstigen Frequenzumrichter dran und man kann auch noch die Drehzahl und die Laufrichtung einstellen.

[@TheMetalist]

Danke schön 😁 ja das wäre auch eine geile sache. Auch dann zum Messer Schleifen geeignet 😊

[@mrskwrl]

No fucking way. Everything on this channel is just mindblowing.

[@TheMetalist]

😁😁😁 Thank you

[@jarredjones3358]

Beautiful work. It's rare that you see a DIY video finish with something looking professional. Beautifully shot video as well; no nonsense, tasteful cuts (especially on the welding) kept the pace engaging while still showing enough to communicate what was happening. Really great!

[@MR619Can]

brilliant!

[@derulle6801]

Good Work!

[@cyumadbrosummit3534]

What are you using for a small adjustable straight edge?

[@ktfl03]

Awesome build vid as always man, I love it! 👏🏼 Thanks for sharing!

[@TheMetalist]

😁😁😁 Thank you 👋

[@johngonsalvesiii8142]

Do you have measurements or plans for the belt sander attachment? Thanks keep up the great videos

[@MrFiestaMatt]

I've maybe missed it but I can't see the plans on your etsy shop for this?

[@Kynosys]

The equipment is amazing! I also want to try metalworking, so I am preparing. I will take a good look at your videos. thank you

[@ledinhanh]

nice video

[@marcelknippers9591]

What a great idea to upgrade my old grinder. I'll give it a try too, but I am afraid I have to watch this vid many times before even starting this project.. Looks simple but to make it work like yours?? Wish me good luck and many thanks for your trouble teaching us. Friendly regards from Holland, Marcel Knippers.

[@TheMetalist]

Thank you 😁 awesome I wish you the best of luck 👋😁👍

[@Rowganlife]

thank you!!! THATS how to make a cheap metal wheel!

[@Brender86]

Sau geil gemacht, Respekt! Das baue ich nach! Danke für das Video! Wie genau funktioniert das mit der Stellschraube, dass das Band mittig läuft? Welche Bandgröße nutzt du, 686mm?

[@WoodArtVlogs]

Good

[@vancleiramos5961]

Excelente trabalho Ficou top top

[@drpipe]

See there's a new addition on the Bessey clamp.. nice video hope your keeping well my friend.

[@TheMetalist]

😁😁😁 Thank you Yes all good 😁👍

[@pm9921]

Beau travail, comme toujours et un plaisir à regarder ,bravo pour ton ingéniosité

[@TopoPilot]

Dude, Your channel keeps me so motivated.

[@stevenmackay9192]

Where are the plans for this please

[@irfanashraf1238]

I don’t know any other Metalist who also is a perfectionist

[@TheMetalist]

Thank you 💪😁

[@rolandburisch9489]

At 0:40, vernier caliper as a scriber?

[@nickdubois8218]

Another excellent video! You do awesome work sir.

[@TheMetalist]

Thank you 😁

[@blindsquirrel4882]

I like the way you trued the drive wheel!

[@TheMetalist]

Thank you 😁

[@N-Lee]

I'm making a belt sander also, and using an 80's polyurethane skateboard wheel that looks exactly like .... yours. Krypton is the brand name if I remember correctly.

[@TheMetalist]

Awesome....it works great 😁

[@N-Lee]

@@TheMetalist That brand and type of wheel has a steel core. It does work great. Less slippage because of the Rubber-ish material.

[@petermaus2528]

Und noch die Frage - Welche Bänder sind das denn (Größe/Marke)? Hast du einen Link dazu?

[@Nicola_Colonna]

When carrying out a job like this, should you already know the size of the sandpaper you intend to use? or not?

[@TheMetalist]

Yes

[@iamjesuskno]

Do you remove the e plans from Etsy?? 😢

[@TheTrooper777]

That is awesome, well put together 👍

[@TheMetalist]

Thank you 😁

[@Phoenix-One0922]

MEH... (most excellent hybrid) I want to dig into your machinist's mind and copy all those designs but... Anyone can do it if only, anyone had the passion and diversified skills and imagination... And anyone should take and absorb the inspiration and create their own designs, you know, be original, like you. THAT is what makes building something so very satisfying. Thank you for your dedication and for sharing your MEH... Most Excellent Hybrid ideas. Amazing contraption and excellent video work. And thank you for not blasting our ears with silly music... It lets you concentrate and immerse your mind into the process.

[@TheMetalist]

Thanks man awesome comment 💪😁👍

[@Phoenix-One0922]

@@TheMetalist I've sent you a message through Etsy since your link in this video did not showed the actual build plans for the grinder, only a page with other machine designs. Please send me the link when you can. Much Obliged.

[@TheMetalist]

@@Phoenix-One0922 plans are coming 😅

[@Phoenix-One0922]

@@TheMetalist Mr. Metalist, or should I call you 'Medalist'? (it seems any project you touch, you champion it...) What do you call the 'expander' with the orange handle used for stretching the band? Can't seem to find it by name... (At least not by what I think it's called..) Thank you kindly.

[@TheMetalist]

@@Phoenix-One0922 its from Bessey

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado , una magnífica lijadora de banda a partir de un esmeril , gracias por compartir sus conocimientos y experiencias , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓 🔝

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@Etiennevisvang]

Good job.

[@rwgoldsmith4]

Don’t muck about with tungsten dust. Get some active dust collection on there with a good hepa filter.

[@TheMetalist]

Yes right, 100% right i just Was looking for a option without a vacuum

[@muckfoot-4093]

😠

[@ukaso-zn2dz]

Hello, your product is great. Can you give me the size of that product?

[@garetkonigsfeld2]

Your helping hands are pretty cool Good job thanks for sharing.

[@Andreas-fi6hr]

Hallo Dirk, sehr geil umgesetzt. Alte Maschinen im neuen Look, mit neuer Funktion. Du hast meinen vollsten Respekt,bin schon auf die nächsten Projekte gespannt. Einen guten Start in die neue Woche, bleib gesund. Grüße Thüringen.. 🛠️👍

[@TheMetalist]

Hi Andreas, dankeschön ja auf die nächsten Projekte freu ich mich schon sehr. Sind 1-2 besondere dabei 😁👍 Wünsche dir auch einen guten Start in die Woche 😁👋

[@juleslobo5644]

Boah, Dirk, krasser Build, wie immer.. Ein Hochgenuss zu zusehen! Und vielen Dank, dass Du das ganze Moppet Schwarz lackiert hast und nicht so eine TeleTubbyFarbe genommen hast! Mega! Die Kombi mit der orangen Schrift ist echt sexy.. Ganz Feine Sache, sozusagen! Freue mich schon auf Dein nächstes Werk! Bleib gesund und frohes Schaffen!

[@TheMetalist]

Vielen Dank, ja schwarz passt immer ist dann bloß immer schwer ein gutes Thumpnail hinzubekommen .... Wünsche ich dir auch 💪😁👍

[@augustolaborantibernasconi6024]

Awesome job as allways. shure as hell i'm gonna try it!

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@homemadetools]

Clever grinder build, and we have seen a lot of these! We shared this video on our homemade tools forum this week 😎

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@kyivwelding99]

Cool meister love to watch your videos energize the idea to help you get distracted and relax in these black times.

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@rolf9280]

Awesome build! What size is the sanding belt please?

[@TheMetalist]

Thank you 😁 40x780

[@ryantreacy1235]

What type of adjustment clamp is that? Awesome build

[@TheMetalist]

Thank you 😄 they are from Bessey

Sehr nice vorallem die Aluteile 😃

[@TheMetalist]

Gell geil 😉

[@richardmeek3312]

where did you find the clamp for the tension of the center??

[@1pcfred]

It is a Bessey BESSTCIHH25 push toggle clamp. Other brands are cheaper.

[@MrLotanT]

Man You make top quality videos 🤙

[@TheMetalist]

Thank you 😁

[@kshofat4]

By far the best diy belt Grinder setup. You've inspired me to get my ass out in the shop and get to work. The added tungsten option is the shit now. BTW what are doing with Snake Plissken's cane? I'm intrigued. You definitely got mad skills.

[@TheMetalist]

Thanks a lot 😁👍

[@PeterNetped]

[@TheEffoff]

I laughed when that fist hammer went bonk bonk bonk

[@muckfoot-4093]

what's wrong with the normal bench grinder?

[@Musicpins]

Belt is better :)

[@Seteclata]

Excellent idea, great job. Congrats.

[@helmutk.2583]

Wie lange hast Du dafür gebraucht, von der Idee über Planung zur Ausführung. Einfach super Deine Ideen.

[@TheMetalist]

Dankeschön 😁 die Idee mit dem spanner hatte ich eigentlich schon länger. Setzt mich dann immerhin und schau was ich an Material da habe oder welche Möglichkeiten es noch gibt. Von der Idee bis ich dann endlich anfangen Vergehen dann immer ein paar Wochen da ich dann meistens noch andere Projekte imlaufen habe. Der Bau geht dann relativ schnell glaube das waren so 8-10h dieses mal 😁

[@helmutk.2583]

@@TheMetalist vielen Dank für die Antwort. Es ist schon beeindruckend.

[@TheMetalist]

@@helmutk.2583 merci 😁

[@dwainbaker1748]

I need pland

[@yusufemrahsimsel]

what kind of welding machine? what is name of?

[@TheMetalist]

Hi Emrah, its a Rehm Tiger ACDC 230amp

[@czwynz]

Super impressive! Brilliant ideas

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@vbenderschi.2777]

Génial 👏

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@Jennegga785]

VOW !!! You have the skills and can do it !!!

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@bitsindustries9848]

Simple yet precise. Minimal stock required, yet robust. Looks a treat, and does not require any of my "One Day" tools. ( One day I'll have a CNC Mill.. And I'll have a 65 inch Grizzly...) I'll see what I can come up with in regards to dust extraction. Impressive work. 👌

[@Rottinrock]

AWSOME I need to build one

[@ramanandamaibam8040]

I want ur belt sander, how to buy?

[@michaelcoccojr2513]

Awesome all around! I may steal the spark arrestor idea from you. Is there H20 in there as well?

[@TheMetalist]

Thank you 😁 not yet but thats a good idea

[@OnkelJann]

Mega! Damit kannst Du gerne in Serie gehen! 😍😃🤙🏻

[@TheMetalist]

Danke, ja das funktioniert auch richtig gut. Ist auch der Spanner der sich selbst einstellt 😁

[@felixe.8402]

Die Elektrodenschleifvorrichtung ist ja so unfassbar genial - ich glaube, das werde ich kopieren, denn ich stehe neuerdings vor genau diesem Problem 🙈 Danke

[@TheMetalist]

Mega 💪 Freut mich 😁

[@Cuongtran-363]

tuyệt vời

[@MrFireman164]

Amazing

[@GemBoyfamily]

Very impresif 👍

[@deetesmin]

Excellent. What size of belts did you use and where did you get the eccentric tensioner from

[@TheMetalist]

Thank you 😁 The strecher are from bessey

[@deetesmin]

@@TheMetalist how about the belts and the size of them?

[@ZOEng99]

Your approach to the work is immaculate. Beautiful

[@Deichwerkstatt]

Der gefällt mir richtig gut, klasse umgesetzt !

[@TheMetalist]

Dankeschön 😁

[@gmendes1831]

Great job!

[@TheMetalist]

Thank you 😁

[@Vikingwerk]

Nice!

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@cptrikester2671]

Excellent build. 👍 and 👍 With all your cool 'hand' tools, maybe the clamp at 10:20 could be replaced with 'pinching fingers' in the future?

[@TheMetalist]

Thank you 😁 Uh nice idea 🤔😉

[@farrierss1724]

I knew this one would get serious when the gloves came off. Very clever design. Another great video!!

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@chrisgerry9181]

Nicely done!👍🤘

[@EvoKeremidarov]

Fantastic

[@locnar1912]

I like the tungsten grinding feature. 👍

[@schulersusa]

WOW smashing 😆

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@GregoryJohnston77]

Well this just got saved in my playlist of (cool shit i seen to make) later. Lmao

[@marvinmarlin9655]

Great build and brilliant video production too!

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@outdoorzone]

Very slick!!!

[@Sahtzor]

Nice one. You keep inspiring me. ;)

[@TheMetalist]

Thank you 😁 Awesome 👍

[@vierelemente5161]

Geil gemacht 👍😉 ABER ich meinte die bauart eines lang bandschleifer (geile oberfläche😉) 1 - 1,5m breit 😉 Das Klötzchen für die elektrodenführung hab ich aus alu jemacht und jeschraubt ;) und diese schrägbohren. Genau zwei dieser Klötzer aneinander und dann schräg am Stoß reinbohren 🤔😉. Der erste der weiß wie man macht um Elektrode so kurz wie möglich😉 Und nicht diese 3D Drucker🙈

[@TheMetalist]

Nice 💪 Dankeschön 😁

[@MrEllhel]

GEIL GEIL GEIL, back to the Rots. Hammer, und genau so isses wen ein Schlosser was baut, und kein Maschinenbauer. Alles mit Bohrmschiene Hammer und Säge.......und Gefüüüühl....Dirk..RESPEKT

[@TheMetalist]

Dankeschön 💪😁

[@Fuck9oogleAskMe]

5:45 using the Sander as its own lathe was genious

[@TheMetalist]

Thank you 😁

[@22_floW]

Very neat, but I'd be worried about that belt snapping and smacking the face... Might be worth refining the design by adding a minor guard of some sort--just enough to prevent that without sacrificing the top-use functionality of the belt.

[@TheMetalist]

Thank you 😁 yes thats a option 😅

[@alexgutzmann1599]

Schleifbänder vom Rohrbandschleifer?

[@TheMetalist]

40x780 glaube ja das sind die 😅

[@iurii-wind]

Класс. Master. ✌️👌👍🤝

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead 😉

[@cesarpadua8667]

genius