Welding Turntable, Automatic Fabrication Positioner

[@eirikkvalheim8627]

Wow, are you kidding me, this is hugely impressive! Thanks for the inspiration man

[@TheMetalist]

Thank you 😊 you are welcome

[@mikelastname]

I haven't finished copying your welding table yet and now this is even cooler! I cannot keep up with you, but keep the genius coming, it is awesome!

[@TheMetalist]

Thank you for that nice feedback 😊 💪🏻

[@cristhianboza9450]

@@TheMetalist do you do it to sell?

[@TheMetalist]

@@cristhianboza9450 not this one

[@cristhianboza9450]

@@TheMetalist could you make for sale

[@TheMetalist]

@@cristhianboza9450 sorry no time

[@archer167]

This is awesome! The first video of the build and this one accessorizing it. On of the best videos out there!

[@TheMetalist]

😁 Thank you 💪

[@clintfulford8103]

Just when you built a brilliant weld rotator then decide to raise the bar again!! awesome work as always 👍😀

[@TheMetalist]

Thank you 😁👍🏻

[@danijellukic2196]

You are a god my friend ! Wow I just got amazed by every video i have seen from your chanell

[@TheMetalist]

Thank you 😊💪🏻 nice to here 😁

[@ГлебНехорошев-ц7ы]

Правильно писал в первой части: "Полезное приспособление". Автоматизация на высшем уровне. Всех благ. Всем добра.

[@birkirorn9658]

I've said it before and I'll say it again: Genius, pure and simple!

[@TheMetalist]

Thank you 😊👍🏻

[@davidoliver2826]

You an amazingly talented artist and craftsman! I would purchase this incredible tool.

[@TheMetalist]

Thank you 😁

[@dbayboyds409]

Wow just wow. Such a fantastic design and build! Thank you

[@gstvbrjs]

Life doesn't seem so boring after all. Great videos.

[@essentialjudge2279]

Very nice build 👌. We actually did the same thing in 2009 in our two car garage. 6in s.s schedule 10 with 12" dia bolt base 10' long with 180° turn at other end and two "y" in the middle. Stainless steel carbon scrubber vent pipe for sewer systems. Harder than hell to balance with that macaroni noodle welded to the end. Not to mention the two "y" in the middle. Groundings kind of interesting to overcome too

[@TheMetalist]

Thank you 😊 Sounds like a a lot of work 😅

[@maxsu8795]

I love the utilization of power drill as motor.

[@freelectron2029]

the motor is typical electric window motor from car. or sometimes used as a wiper motor in older cars

[@ManOfGod-70]

Absolutely amazing job brother. Awesome talent. God Bless

[@TheMetalist]

Thank you 😊

[@erikhaley]

That is awesome I cant wait to make one myself Thank you for sharing this

[@jesussanrin6248]

It is Amazon the way you work: accuracy and smart: i love it

[@TheMetalist]

Thank you 🙂

[@jae5446]

Fantastic man! I enjoyed the content and the videography, thank you sir!

[@TheMetalist]

Thank you too for the nice feedback 😁👍🏻

[@RockstarRiderz]

Dude you’re insanely talented keep up the work!

[@roddy46198]

There's nothing you can't do that won't make me smile! Cheeky Bugger!

[@ThrashingBuddha]

Wauw, that is ridiculously cool!

[@How2Wrench]

Just here with our #how2wrench minds BLOWN again...wow!!!!!

[@TheMetalist]

Thank you 👍🏻

[@woodbe5311]

such a good metalist master you are. Thanks for sharing.

[@TheMetalist]

Thank you 😁

[@meletisilias4576]

Thats a big brain right there my dude well made !

[@rondill8429]

Maybe make a list of parts used and where to get them would be a plus on the videos you make... Sweet machine for sure!!!

[@TheMetalist]

Thank you 😊 mmhh thats difficult most of the people don't live in same Country

[@cvad1128]

The Metalist even knowing what you used and we could do our own research for the parts would be sweet! I would pay for the list!! Awesome work!

[@TheMetalist]

Shortly i will make a Video with all my favorit tools

[@hpk4917]

Schwerstens beeindruckend. Wirklich genial. Really Brilliant 👍👍👍

[@JAKE3914]

Fantastic craftsman!!

[@TheMetalist]

Thank you 🙂

[@TechieTard]

This guys the fkn man, absolutely awesome! Thanks for the material.

[@michaelrosenlof1084]

Outstandingly well done ✅👍

[@TheMetalist]

Thank you 😃

[@marioyiannari3505]

That is bloody awesome mate 👍

[@TheMetalist]

Thank you 😊

[@johnyogiburr2881]

Absolutely brilliant, a real WOW moment.Thanks.

[@TheMetalist]

Nice 😁 Thank you 😊

[@mwjii]

I just found your channel great stuff!

[@TheMetalist]

Thank you 😊

[@srkff2006]

Hey I love your videos

[@azentioced9]

you are very clever fellow !!

[@TheMetalist]

Thank you 😁

[@lsj624]

Nice vid. Question. Where did you obtain that adjustable layout scale? I like the looks of it alot. Thanks.

[@paulp96275]

That is fantastic brilliant 🇬🇧👨🏻‍🏭

[@TheMetalist]

Thank you 😊

[@MANtoMASK]

Weldporn! I like this.

[@TheMetalist]

Thank you 💪🏻

[@MANtoMASK]

@@TheMetalist, guy good luck!

[@danielepasqualetti7909]

Complimenti! Ottimo risultato.

[@Weldingprobably]

Very nice, I’m impressed

[@TheMetalist]

Thank you 😊💪🏻

[@cicerohenriquesdasilva8355]

Excelente top de mais indescritivel a coisa mais perfeita que ja vi em soldas com automatizaçao feitas em casa😎😎😎

[@TheMetalist]

Thank you 😁

[@johnmathews3027]

Very nice work, thanks for sharing

[@OnkelJann]

Das ist ja mal sowas von hart geil! 😍😍😃😎🤙🏻

[@TheMetalist]

Danke fürs Lob 💪🏻😁

[@AnanasStudio]

19.5k subs and i still here! :D

[@TheMetalist]

?😅

[@drpipe]

Decent love it.. Any chance you could do some Tig Tips and Tricks 🙏 You running pulse on Ali ?

[@TheMetalist]

Thank you 😊 Sooner or later i will make a Video for tig welding. At the moment i have some other project for my next Videos

[@dontnubblemebro]

Adding to this, I'd love to see a bit of detail on your TIG brazing, it's my favourite process, but more opinions is always brilliant. I rebuilt a cast iron mower pulley with it a while back, that poor mower has been abused for over a year, still zero issues.

[@TheMetalist]

Did the same on a broken cast iron bracket. Still work.... Love also tig brazing 😊 i have a project in mind with a lot of tig brazing that would be a option to show my tips 😅

[@6pekXX]

Hello! I see, that your MIG welder is kemppi's Minarc MIG Evo model, but what is your TIG Machine ?

[@matuteriveto7403]

I have one of those and I would like to use it to bend steel and make scrolls but don’t know how to??

[@TheMetalist]

Uhh I don't know if it's strong enough

[@Cozycozycozycozy]

What the hell man. This is insane xD

[@danielthomas1508]

I just want to know where you got that ruler that you use in your videos? Keep up the work you really are talented

[@TheMetalist]

Thank you 😁

[@Zarlax]

oh man - me too....

[@hectorortega9131]

Hello, Were can i buy one of those lathe Heads?

[@cherifmosta2142]

Very cool and beautiful😱😭

[@TheMetalist]

Thank you 😊

[@jopatube1]

excelente maquina personalisada voy a intenrtar hacerme una

[@TheMetalist]

Thank you 😁

[@BEX_prof]

Какую присадку использовали при сварке? Welcher Zusatz wurde zum Schweißen verwendet?

[@alexnelson8743]

At 00:45 what is that measuring tool your using and where an I get one!? I’ve loved your videos for a long time now and have tried to find that tool and can’t help me out!? Or did you make it? Lol

[@TheMetalist]

Thank you 🙂 That mesuring gauge ... do you need inch or mm?

[@jackduplechain7592]

@@TheMetalist inch

[@scottreimer6513]

That is fantastic with my friend. Very impressive. I love your stuff and curious about a lot of your tooling. What kind of table top band saw do you have?

[@TheMetalist]

Thank you 😁 Optimum optisaw S100G

[@nicholasrodriguez6981]

quick question.. did you integrate the pedal with the existing pwm that you had on there? if so, was it plug and play or did you pull it apart and have fun with wiring? if you ended up using a different pwm with the pedal, can you link it here please? want to build this soon, so cool and such a great idea! Also, if you were to add this to your etsy builds with the links to the products id buy them for sure! Thank you in advance for your help!

[@carramba86h77]

Wow, very nice!

[@TheMetalist]

Thank you 😊

[@Ferrets42]

you cheeky bugger haha well done

[@TheMetalist]

Thank you 🙂

[@jameswilliamson8050]

Hit the LIKE button Guys That is one nice little set up there 👍👍👍

[@TheMetalist]

Thank you 😊👍🏻

[@charlienewman9824]

Nice work I like that lay out square you use what is that ? Are you in Europe? Thanks for sharing !!

[@TheMetalist]

Thank you 🙂 The mesuring gauge!? From Germany

[@istvancsabai4485]

Ez nagyon jo lett.

[@AndrewCheffings]

how did you wire it up to take the battery?

[@java2894]

Wow awesome machine

[@TheMetalist]

Thank you 😊💪🏻

[@java2894]

What’s machine u using for the aluminum the same brand as the mug machine?

[@TheMetalist]

Yes, its a Rehm Tiger AC/DC 230

[@java2894]

The Metalist that’s a sexy little mackine I can’t believe is that doing all that weldt

[@java2894]

The Metalist is it the digital one with the screen ?

[@SergeiVinnikov]

Очень крутая штука!

[@Workshop43]

Super awesome:)

[@TheMetalist]

Thank you 😁

[@mirkobindella7601]

Super. Where to bay ?

[@TheMetalist]

Thank you 🙂 Oh the whole setup 😅

[@jimmypopp2695]

Dirk, awesome video!! where did you get the orange handle fasteners?

[@TheMetalist]

Thank you 🙂 eBay

[@ISOSAILING]

awesome job, be a bit fidaly to set up but awesome for mas production!!

[@TheMetalist]

Thank you 😁 Yes it is, need allways a little testig befor...😅

[@chriswhitham9233]

Hi same you haven't put plans for this on

[@humdrumsrelax8662]

bro you are amazing, you inspired to take up the tig welding style. What tig machine would you suggest i start off with as a beginner...

[@TheMetalist]

Thank you 😁 Which country you are from?

[@fabriceseverin8030]

great idea , bravo !

[@jakespede7540]

Only have one thing to say.....Start building and selling them!!!

[@TheMetalist]

Thank you 😊 yes the turntable is planed to go in production 😁

[@jackduplechain7592]

@@TheMetalist hit me up when it does

[@muhammadalhasani2841]

Superman ingenious

[@TheMetalist]

thank you 😁

[@Будулай]

Супер👍👍👍👍

[@TheMetalist]

Thank you 😊

[@part775]

I'm from Italy

[@abhijitganu7771]

Amazing man

[@TheMetalist]

Thank you 😊

[@BovoM8]

where did you get the reduction gears from?

[@TheMetalist]

From a old lath

[@zinzinpreparation]

😍😍😍

[@Johnnytk36]

I get that one switch you installed is for turning it from foot pedal to manual mode. What is the other switch for? Also thanks! Im in the middle of building my own! Waiting on parts

[@TheMetalist]

Thank you 😁 Its just on/off 😅

[@Johnnytk36]

Ah, good. That’s what I would have guessed, but I wanted to be sure it want some super cool feature I wanted also. :)

[@backyardprojects8153]

This is awesome af

[@Balystube]

Love your work, but how is the mig torch wire feed being controlled? Did you automate it?

[@TheMetalist]

Thank you 😁 at the moment manuel but i was thinking to coneting with the turntable 😅

[@Balystube]

The Metalist awesome, you had me wondering.

[@V8SKULLS]

FUCKING BEAUTIFUL BROTHER 👍👍👍

[@TheMetalist]

Thank you 😁

[@joshferry2094]

Hi, did u get plans for the welding table? Love your work

[@TheMetalist]

Thank you 😁 plans will come

[@Thewatson77]

10/10 🙌🏻

[@TheMetalist]

Thank you 😁

[@luisvasquez581]

What kind of pedal is that

[@TomChame]

Excellent!

[@TheMetalist]

Thank you 😊

[@beachboardfan9544]

What tig rod are you using? Brazing rod?

[@TheMetalist]

Yes 😊

[@voiles7987]

You just created something a company spend millions of dollars on for a fraction of a price

[@TheMetalist]

I have to make it automaticly, at the moment it everything is controlled manuell. But it would be possible 😁

[@voiles7987]

@@TheMetalist although true it is still an amazing accomplishment. Only thing I could think of would be to have the pipe be able to go through the chuck so you could connect a longer piece

[@TheMetalist]

A longer one would be possible but the setup will take a bit more time

[@Meatman27397]

How much for you to build one for me?

[@user-cg9oi5ug4d]

Instant sub

[@shneorl]

What model of Tig torch you using?

[@TheMetalist]

Its a ck-worldwide flexloc

[@AnanasStudio]

why you hard soldering this project instead tig welding?

[@TheMetalist]

Its just for the look 😅

[@ramirocuentas5999]

What's the name of that rule u use for marking?

[@TheMetalist]

That measuring gauge

[@primerestore6627]

cool 💪👍🏻👍🏻👍🏻👍🏻

[@гречебодрый]

what else can I cook on this device?🤔

[@TheMetalist]

Would be good on a bonfire to turning the meat 😅

[@гречебодрый]

@@TheMetalist Yes, a good spit will be for meat!

[@AliMahmoud-mp9mq]

Woooow 🌹🌹🌹🌹

[@TheMetalist]

Thank you 😊

[@ЕвгенийБаулин-и2ц]

Браво!!!

[@TheMetalist]

Thank you 😁

[@ruslantkachenko3799]

Класс ! 👍

[@TheMetalist]

Thank you 😊

[@elopez1369]

Where can I find that ruler you use for marking?

[@TheMetalist]

Inch or mm?

[@elopez1369]

@@TheMetalist both!

[@TheMetalist]

Mmhh you will find them on Amazon or eBay, inch i couldn't find one till now 😐

[@LeeRiddiough]

great Machine , an incline where you sourced the bits would be helpful , plus also the measurements ... thanks or message me and ill purchase the plans

[@TheMetalist]

Thank you 🙂 plans will come shortly

[@МагомедхабибБагатирадаев-з6о]

♥️👍👍👍👍

[@ilja271]

👍

[@fabry400]

ECCEZIONALE!!!!!!

[@TheMetalist]

Thank you 😁