How To Remove Ethanol From E10 Unleaded Fuel To Use In Lawnmowers And Small Engines

How To Remove Ethanol From E10 Unleaded Fuel To Use In Lawnmowers And Small Engines
Here is my channel wish list if you would like to show some support in purchasing some tools or spare parts, it is gratefully appreciated www.amazon.co.uk/hz/wishlist/...
TOOLS I USE -
Oil Extraction pump amzn.to/2UBApDI
Fan Blade Bulb amzn.to/39BLI4a
Blade removel tool amzn.to/3nxBVQj
Micro Drill Bits amzn.to/36Jpv0R
Carb Cleaning Files amzn.to/3lH8ESx
Hex Shank Extension Drill Bits Bar Set 1/4" 3/8" 1/2" amzn.to/3oFKHx9
Dewalt DCF887M1- Impact Driver, amzn.to/3oEVcjZ
Lawnmower Rotary Blade Balancer amzn.to/3e6UOWN
Rode WIGO Wireless GO Wireless Microphone amzn.to/2JlRlIN
Neewer 176 LED Light amzn.to/2HaubnJ
Universal Style, Mower Deck clamp for blades amzn.to/31PKygE
Briggs & Stratton Diaphragm and Gasket set amzn.to/3kF8Y3H
GT SONIC 3L Ultrasonic Cleaner amzn.to/2TDdVy9
VEVOR 3L Ultrasonic Cleaner amzn.to/2Gb3PBJ
Stainless Steel Strainer for carb jets in a cleaner amzn.to/3e6CxJ2
Please follow me for more channel updates
Instagram micksmowers...
Twitter micksmowers?s=07
Banjo Hop by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/

[@themowerman]

Here is my channel wish list if you would like to show some support in purchasing some tools or spare parts, it is gratefully appreciated www.amazon.co.uk/hz/wishlist/ls/13BO7QKGAZZV2/ref=nav_wishlist_lists_2?_encoding=UTF8&type=wishlist

[@alan6832]

Octane booster REDUCES the flammability of the fuel, not the other way. It's purpose is to keep the fuel from igniting too soon, before the spark. There are quick start additives that increase flammability. Also, if that fuel had 10% ethanol, it should have shrunk by half a liter, but it only shrunk by a quarter liter, so I don't think you got it all; either that or it didn't really have 10%.

[@themowerman]

@@alan6832 hi Alan.. ta for the comment.. E10 has up to 10% it could of been less..

[@ladamyre1]

I am an ASE Master Certified Automobile Technician and I have been trained on how to measure ethanol in fuel and what it does to the fuel. In testing we use coolant, but you can use alcohol (with food coloring) and you will have something that will burn after you siphon it off. Calculate what the 10% will be and use that much alcohol to remove the ethanol from the fuel. It makes it easier to see when the process is finished. You are correct to use an octane booster because ethanol is an octane booster and when you remove it the octane rating of the petrol will drop possibly causing detonation. However you have that "flammability" thing backwards. One more thing. I doubt that it is the ethanol itself that is destroying the rubber o-rings and gaskets. As far as rust goes, you're spot on when the equipment is used once a week and has time to absorb moisture out of the air, and I suspect it is that water that is degrading paper gaskets and rusting pinholes in floats on carburetors. On stuff that is used daily, as you noted, or on a car that has a tank that is moisture controlled, the ethanol does not cause a rusting problem. Cars also have fuel filters that won't pass water so their injectors don't rust up.

[@themowerman]

@@ladamyre1 yo yo.you know what... Best comment ever.. thanks

[@mattyburrows9059]

e10 has a sell by date because like you pointed out mick..it absorbs moisture from the air..i see everyone panic buying petrol thinking to myself..this looks like they have too much petrol and need to get shut of it..so people will have a tank full they wont be using..rusty engines by christmas

[@grahamherbert3612]

I've been doing this for years, and as the ethanol sludge is allegedly so safe for the environment, I pour it straight down the drain hole outside my house :)

[@ketankadam5669]

😂

[@wesman7837]

I mean it's just corn oil right?

[@kleetus92]

could just burn it in a pan...

[@njkip]

I had no end of trouble with my Honda gx engine on my jcb dumpster. I did this procedure and put it in the dumpster ( added a bit of octane booster) it runs great now! I'm using it in all my mowers and strimmers from now on!

[@themowerman]

Fantastic news

[@cgbrewer12]

Cute little kiddo. You can tell he is so proud of his dad. 😊

[@themowerman]

Thanks

[@nunyabznz3029]

After 4 mowers becoming so destroyed by the nasty ethanol, I am SO glad I found this video. Wish I could borrow Riley to assist me so I could have as much fun as you two do.

[@themowerman]

Lol hes available at £20 per second lol

[@pennyan2057]

Great video Mick , you can also use water from a de-humidifier, providing the catch tank is clean, I get 5 gallons a day in the summertime from the de-humidifier in my basement, it's free and I use it for my potted plants and veggie garden as well!

[@themowerman]

Yeah I guess you can

[@leathleyg5995]

I once asked a specialist dehumidifier engineer if I could use the water for my fish tank. His reply - "OMG. No..! Its absolutely full of bacteria from the cooling pipes." So I don't know if the bacteria would affect the petrol? Probably the ethanol would kill it?

[@lkeil84]

I have had fits every year that I pull out my tiller, my pressure washer and my lawn mower. I threw the weed whacker away it gave such fits and bought a battery EGO one that is brilliant. I bought new carbs for them one year, but still the next year, filled with gunk. At the beginning of covid, I did this removal process, drained all my tools and filled with this ethanol free fuel. This year I pulled everything out, and like magic, they all started right up and ran perfect. I personally just start with premium fuel, so after the ethanol removal, I have regular fuel. I then ad some Stabil and I think it will store for years. Now 1 1/2 years later, the fuel I still have left over looks and a eels just like new. And yes, you can just drain all your tools and then run them dry, but this is easier. I will never put ethanol fuel in a small engine ever again.

[@billb7876]

CONvid

[@JB-ly3eo]

just use aspen and there is no messing about

[@SuperBuzzbomb]

Just add Stabil to the fuel as soon as you get it. I have only ever had one fuel related problem and that was a generator that I decided to read the instructions on and drain the fuel after use. Next time I needed it I had to remove the carb and clean the varnish out for it to run . Ever since then I never shut the fuel off to the generator and it fires up on the second pull even after sitting for over 2 years. My riding mower is over 15 years old with no carburetor problems along with my push mower, weed eater and chainsaw.

[@boilerhousegarage]

@@billb7876 The CONvid SCAMdemic.

[@billb7876]

@@boilerhousegarage Yup, if folk don't wake up seen we are buggered

[@steveingram5245]

Top Posts Mick... Not only the ethenol procedure, but my S/P drive shaft wasnt turning either, exactly the same fix as one of your other videos. Worked a dream. Mower was purring and the grass has been cut. keep up the good work. Big Thank You!

[@themowerman]

Glad I could help and you enjoy the videos mate

[@alancook9586]

Very helpful Mick. As another contributor says zero ethanol fuel is very expensive this looks like a good way to protect my strimmer and chain saw.

[@waltermcphee3787]

Over £20 for a 5 litre can, but it is also free of benzine which is a carcinogenic component of petrol.

[@77gmcnut]

Interesting to see this process with the dye added to the water. Cheers to you and your son.

[@themowerman]

No worries mark.. hope you enjoyed it

[@mattbettany1174]

Little tip I learnt years ago . When pouring from a container like the de-ionised water . Pour from it side ways and then you don’t get the surging effect of the air trying to get back in the container. You then get a steady pour .

[@themowerman]

Thanks mate

[@RiverMersey]

Yes, I imagine @micksmowersthemowerman is aware of this but for the purposes of this video poured the bottle in this way so the camera could notice the label on the container.

[@petersaupe7455]

I make an tiny air hole in the handle of the pouring container. 1mm is about right.

[@BigALstuffvids]

The jug used for the deionized water and other containers like it were designed to be poured with the spout on top, not on the bottom.

[@atlantajunglepythons1744]

Never drink from the opposite side of your mug.... The laying on its side trick was taught me to pour fluids into or near engines where you don't want to spill, like with coolant, oil or windscreen fluid.

[@jamesaucutt8284]

Awesome video mate it’s great advice for us who work on small engines. I don’t use octane booster that often because of the yellow residue or orange ish color it leaves on the spark plug and Combustion chamber.

[@williamwarnold6737]

Thanks for that explanation, I have an old engine, in the back van I use to generate PSI. For blowing up tyres . It’s been doing a great job for many years, and I would hate to have to retire it. 34 years to be precise.👍

[@L8nitedave]

I have to say I wasn't really interested in this, but just seeing you and your boy having fun just sold me. Just wonderful. So I learned something and look forward to seeing you two again.

[@lukeweetman3858]

I have always used standard unleaded for years with no issues, only thing I do do is when I finish using the machines is drain the tank and then run it till it runs out and never leave machines over winter with fuel in

[@archieireland570]

I like that you are including your son in helping you. The reason your total was a little less is when combining alcohol and water the total will always be less than the sum of the two. Like your video.

[@alansaville2211]

A very informative chemistry lesson there Mick i shall definitely give that a go. Especially now that i have my workshop finally up and getting ready to get down and dirty.

[@themowerman]

Good lad

[@andrewwelford7697]

Great video. Just been through all this with diesel in tractors and diggers when they increased bio oil. Filters all clogged up have had to put inline filters on everything to help and see when they need changing. new filters, time , going for new filters,have to put additive in tank the world has gone mad

[@kevinhall9198]

My car had a terrible miss in it- changed to ethanol free fuel- works a treat!

[@therealchayd]

Nice one! I remember seeing another youtuber who used a water cooler bottle for this purpose, but he had fitted a tap to the bottom somehow. As it narrowed down to a neck at the bottom it was easier to see the division between the petrol and the water/ethanol.

[@TarylFixesAll]

I like the food coloring. GENIUS MATE! Hi Riley Boy.

[@themowerman]

Thanks cupcake

[@R.N.GPerformance]

my man taryl how are you doing buddy. cant wait for dinner on sunday.

[@themowerman]

Love a Sunday dinner

[@R.N.GPerformance]

@@themowerman absolutely

[@stephenwilliamson6118]

A great video Mick. Mick the petro chemist, your skill has no limits 👍🏻

[@grahambate3384]

In Australia, we can get straight petrol as well as E 10 and E 85. I always use straight 98

[@mrdanger4851]

Thanks for this video and simple explanation of what is actually happening.

[@awizardalso]

My real name is Michael McCluskey. I live in Canton, Ohio here in the United States. I did see another video on how to remove ethanol from petrol or what I call gasoline. I have three gas powered machines. A lawn mower, a weed eater and a leaf blower. Thank you for posting this video

[@themowerman]

Your welcome

[@johngardiner6800]

Very useful thanks. By the way when pouring liquid from a container like the one in the vid. Have the spout at the top so that air can enter to prevent spurting as you experienced.

[@Jim_M_75]

Clicked on the suggested link for the science side, subbed and hanging around after seeing you with your lad. Top man.

[@RTD1947]

Been doing this for years, works great!!

[@ewokfromthewraiths9703]

Just a tip for pouring the de-ionised water, it works the same for fuel and oil cans, is to pour the bottle on its side, the glugging comes from air getting trapped in the handle part, so ifyou get that level, you can stop the surging of the flow, and make it pour nice and smoothly. Good video by the way, really enjoyed it, learned something today Cheers, keep it up!

[@AndrewN75]

The glugging comes from having to let air in to replace the contents coming out. I completely invert the container so the outlet is at the top, but sideways works, too.

[@Carpfisher992]

Great tip Mick. Glad to see Riley boy helping.

[@themowerman]

Oh he loves to help

[@anthonybancroft5350]

Great Instructual video, fully explained, Just shows what crap we are now putting in our cars etc, thank you 😀👍🏻

[@amysmith-nk2wf]

there trying to destroy the older car with this shite and more petrol vehicles so we.go electric in the end

[@fighterpilot6461]

Weee are fortunate to have a couple stations that still sell hytest ethanol-free fuel. Its cost is about 15% more. But you showed a very nice trick for those who don't have an option. The gunk is a problem. That's why you never store your vehicles over the winter with fuel in them. The other trouble is ethanol tends to dry out gaskets and diaphragms. A very small amount of two-stroke oil can go a long way in a 4-stroke engine to offset some of those effects.

[@wesman7837]

@Jim McIntosh ethenol is basically just corn oil.

[@7bookem]

Great video! You have no idea just how useful this is

[@ramiretz]

that reminds me on how i check the Ethanol content on our fuels here regulary....... very nice vid mate !

[@harleyboyd9998]

Nice information & your a good father as you listen & answer your son's questions Showing him he's important as your helpful video. Thanks

[@georgezuss2925]

Great vlog, mate, thank you kindly for sharing. Two points, friend: Please don't underestimate how useful this is to blokes li,e me with older carb-equipped motorbikes. This is a good amount to go in most recreational bikes and it can't do any harm( I imagine, in my untrained opinion ) to be keeping that water & gunk out of my bikes' running gear. Also, I had to source containers to drain off all the diesel out of my 4x4 recently. By far the best and cheapest option I found was used big containers sold off very cheaply by a local brewery. They make craft type ales and apparently struggle to get rid of the large containers. I just cleaned them out thoroughly, bought a tap from a camping supplier, installed at the bottom exactly as per your clear container. The cost was pennies compared to buying tapped purpose-made containers. Thanks again, friend..........keep smilin', bloke.....

[@themowerman]

Thanks for the comment.. I appreciate it

[@billb7876]

My barrel only cost £8 off the dreaded amazon and its clear. We needed it for our old Francis Barnetts

[@davidcurnutt9584]

Great vid on a government produced problem that the average consumer has had forced upon them. Simple solution too. I think I am ready to buy one of your shirts though and have it shipped from the UK.

[@andybtec]

Good stuff. I've just got some aspen two stroke mix to try in my chainsaw etc

[@sixtysecondsofstephens2386]

Just popped on KZbin, very informative. Great seeing you and your boy enjoying the shed.

[@themowerman]

Thanks mate

[@mopricefam]

Such a cute little guy! Always nice to see little guys learning with theirs dads!

[@themowerman]

Yeah he is very special to us

[@markkeyser]

Very interesting video! Thanks. We can still buy ethanol-free gasoline here in the States but it's quite expensive. I use it in my small motors. Another thing that appears to work regarding the degradation of fuel in carburetors (but I can't explain why) is the addition of 2-stroke oil. I've got a McCulloch ProMac 10-10 chain saw that I've always burned regular 'pump' fueI in (purchased new in 1973) that, even after the inclusion of E10 -15 fuel, has always started and run well after long periods of inactivity. I use a 40/1 or 50/1 gas/oil mix. I'm tempted to try adding a bit of 2-stroke oil to the tank of my Kawasaki KLR 650 before I 'put it to bed' for the winter and see if it works on the bike as well.

[@joee8417]

drain the tank. put a pint of chainsaw (gas/oil mix. I use regular 2 stroke oil at 16/1. ) fuel in it run it until it smokes. drain tank. start and run out of fuel. now all the carb, engine and exhaust parts have a protective film of oil on them. In spring put batt. back in, was on a trickle wasn,t it? add gas, ride the hell out of it!

[@petercross8871]

Hi Mick, watching your video on recommendation, can I suggest that you turn your primary tank on end . Place two lengths of wood on your bench, deep enough so as to allow the container to sit up right with the blue cap facing you and overhanging your bench so you can turn your tap on. You will need to screw the wood to the bench. attach a small length of hose to the tap, about 450mm. This tube goes into your petrol can after the process, so you don't have to move your main container. Pour your fuel into your container, add your water. Shake, leave, I think if we both have the same container, the bit of tube that sit's inside your container will when things have settled sit just above the ethanol gunk. So allowing you to recover all your ethanol free fuel but only using one container. I achieved this through trial and error. Great video. I have signed up. Best wishes

[@themowerman]

Ok mate thanks for the info.. great to have you aboard

[@jlucasound]

That electric pump is awesome! Thanks for this!

[@kjfishman547]

Great information for those that can't find ethanol free gas at the pump. I am fortune enough to get "real gas" no ethanol in my area. Cost a little more but worth it especially for my outboard.

[@dawgdawg3075]

We can find non-ethanol fuel in my state, but the nearest station that carries it is now 15 miles away, I need to pencil out whether your solution (which I like) is more cost effective. Thanks for the demonstration!

[@TIMMEH19991]

For people living in the Midlands with a local Esso petrol station, their synergy fuel, although is marked E5 is actually ethanol free. Both the 97 and the 99 RON versions.

[@patrickvennard838]

Yes I checked today and Esso super unleaded is ethanol free.

[@alanreynolds2125]

28/11/23 sorry boys not anymore!!😡😡😡@@patrickvennard838

[@josephfine3394]

Well done, Mick, thank you sir! All the best to you and Riley.

[@themowerman]

Same to you!

[@alandykes2519]

Thanks for sharing that Mick will definitely be giving that a try 👍👍👍👍

[@martineleven8179]

If you haven't got the time to do this just buy aspen 4 (alkalyte fuel), admittedly its about £20per gallon but it burns clean as a whistle and lasts for years if your storing something.

[@juststeve5542]

If you're In the UK, a lot of the "Super" brands are also Ethanol free. I use these in my motorcycle at the end of the riding season so I don't have ethanol fuels sitting in the carbs over winter.

[@robthegardener9631]

At £20 for 5 litres I reckon using Aspen all the time is just as expensive as paying for a carburettor repair every couple of years. However, as compromise I'll do most of the job with ordinary petrol but then I empty the tank and finish it with about 100 ml of Aspen. That way the ethanol should be flushed out so it's not sitting in the carburettor causing damage between use.

[@STTC]

Absolutely fascinating Mick, it was like watching a crazy man in a laboratory,,, Really interesting video, I bet this one goes really big with this great demonstration,,, well done

[@pl7868]

Was going to throw the weed whacker away was so sick of changing the lines in the tank an cleaning the carb every spring but will try this , Thx for the video

[@themowerman]

No worries

[@dennisfox935]

Very Informative video. Thanks for taking the time. Your boy is loving his dad as it should be.

[@themowerman]

Thanks Dennis

[@Gleone58]

Lucas booster contains naptha (petroleum) 60-80% and MMT. Managanese derived chemical similar to Lead from back in the day. Just like Lead, MMT leaves residue on spark plugs and will eventually clog catalytic converters on vehicles. The residue will be reddish orange, lead was yellow. Easiest way to find out what octane booster brands contain is through a free SDS safety data sheet.

[@johnbrizendine7716]

The CAS numbers will list everything in it, even if it lists them as "proprietary blends" or "hydrocarbon blends" or otherwise, the CAS number will say what the chemical is.

[@themowerman]

TOOLS I USE - Oil Extraction pump amzn.to/2UBApDI Fan Blade Bulb amzn.to/39BLI4a Blade removel tool amzn.to/3nxBVQj Micro Drill Bits amzn.to/36Jpv0R Carb Cleaning Files amzn.to/3lH8ESx Hex Shank Extension Drill Bits Bar Set 1/4" 3/8" 1/2" amzn.to/3oFKHx9 Dewalt DCF887M1- Impact Driver, amzn.to/3oEVcjZ Lawnmower Rotary Blade Balancer amzn.to/3e6UOWN Rode WIGO Wireless GO Wireless Microphone amzn.to/2JlRlIN Neewer 176 LED Light amzn.to/2HaubnJ Universal Style, Mower Deck clamp for blades amzn.to/31PKygE Briggs & Stratton Diaphragm and Gasket set amzn.to/3kF8Y3H GT SONIC 3L Ultrasonic Cleaner amzn.to/2TDdVy9 VEVOR 3L Ultrasonic Cleaner amzn.to/2Gb3PBJ Stainless Steel Strainer for carb jets in a cleaner amzn.to/3e6CxJ2

[@tonyquinn3941]

Hi Mick, I have tried a conical shaped container with bottom tap and tap located 1/4 way up to draw off water / mix . Ding ❤️!

[@bryandowdey1779]

Very helpful. Thank you Mick.

[@roberthuntley1090]

I got my lawnmower's manufacturer (Challenge) to confirm that it will accept 10% ethanol. Beside that, what I usually do is put in just enough fuel to cut the grass and then leave the machine idling until the fuel runs out, so I never leave unused fuel sitting around in its tank/carburettor. The small amount left when the engine stops soon evaporates leaving a dry system. I started doing this year's ago to stop dried up fuel forming gum etc. to clog up the jets, but it should also mean that the plastic seals are only exposed to the ethanol for a few hours per year.

[@robertmuncaster3510]

I started doing this and my machine stopped surging.

[@nikduffield5457]

Yeah....Yamaha told me E5 fuel doesn't harm their motorcycles (bullshit). E5 made my tank porous until I had loads of tell-tale air bubbles in the paint finish all over the tank and the tank had slightly distorted too.....looked like someone with smallpox !!! So don't believe the manufacturers, they don't want any responsibility. Likewise the Government says Ethanol fuel is no problem too.....it's all a lie Ethanol is an extremely inefficient fuel you burn more of it to get power out, so your overall consumption increases and fuel economy drops....not very eco friendly then !! Just means you get sold a dodgy watered down fuel more expensively with extra servicing costs. We are being taken for a ride.....literally. Simply more profit for every one involved other than the end user.

[@skytrainii8933]

Ethanol has a higher octane rating than gasoline and gives a net boost to the fuel's octane. Octane rating of fuel is not a measure of how flammable the fuel is though. In fact, it is more related to its ability to resist knock or detonation. The higher an octane rating, the more STABLE the fuel is and the better it avoids detonation. The octane index is a rating in which the fuel being measure is compared against pure octane. (Octane is no longer actually used as a fuel.) An average octane rating of 100 means the fuel being measured behaves exactly the same as Octane would in resisting detonation. Many Octane boosters could just be ethanol since ethanol does boost the octane of gasoline. I am not sure what Lucas uses in their fuel booster. But before I would add it to the gas you just "de-ehtanoled", I would make sure it does not have ethanol in it.

[@jamesharrison6201]

Most of the "Gas" we are able to buy here in the US has no gasoline at all. It's the petroleum equivalent of Frankenstein's monster. Majority of our real gasoline is exported

[@johngardiner6800]

@@jamesharrison6201 Hi, as you referred to 'gas' as petroleum, why don't you call it petrol as in the UK?

[@TurboMountTV]

On a cross country trip I was surprised driving through Oklahoma that my car felt peppier, and I was getting 10% better gas mileage. Then realized it was real gas, not the 10%. They might as well put 10% water in, same result. 10% ethanol is one of the biggest modern scams. A political promise made to corn states that will be darn impossible to repeal.

[@richard68380]

Well said mate. I was looking to see if anyone would explain the octane rating. 👌

[@Gleone58]

You can add an MMT additive which is in some boosters. It is derived from manganese metal and acts similar to how lead did back in the day, only downfall is manganese poisoning of the catalyst in cars and red deposit on spark plugs, similar to the yellow deposit from lead.

[@garryclelland4481]

good video Mick , good on you for including the weeman

[@charlesbarnett2724]

Great video. Very helpful. Thank you both ❤

[@knighthawk86855]

Also was thinking of using glass containers but be careful, gas likes to build pressure and once shaken and seals the plastic will expand but glass won't, and it could explode, not a firey explosion but a pressure explosion, which can hurt you, and make a huge mess.

[@MDMowers]

Wonder if pouring it through a Mr Funnel would remove all the water and ethanol gunk. Going to get one and try. Good vid 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@oreilly3592]

B&Q is one of my favourite shops along with Halfords, Homebase, Wick's and Screwfix.

[@chrisbarnes2823]

A very interesting video, thank you. Here in Canada I use Premium Gas which does not contain Ethanol in my lawnmower, snowthrower and generators. My two stroke weed wacker uses synthetic fuel. I know that most new gas power equipment is now hardened for Ethanol, I buy premium gas on a regular basis as we use it in my wife’s 33 year old sports car. My truck is a diesel so that is a non issue. I usually keep 100 litres of gas on hand in case we have a power outage and then rotate through it, I paid $ 1.56 a litre this morning for premium gas, which is about £0.91.

[@simonharper4199]

Hi mick. I emailed esso a month ago and this is the response i got: 'The majority of our Synergy Supreme+ 99 is ethanol free (except, due to technical supply reasons, in Devon, Cornwall, North Wales, North England and Scotland). Legislation requires us to place these E5 labels on pumps that dispense unleaded petrol with ‘up to 5% ethanol’, including those that contain no ethanol, which is why we display them on our Synergy Supreme+ 99 pumps' They are the only company to still sell ethanol free fuel -the premium unleaded. I mailed all the other big companies and they are putting 5% in their premium As a side issue you could avoid the octane booster by starting off with a high octane E5 97ron premium unleaded and by the time you take the ethanol out the octane drops to 95ron. The premium you pay for the 97ron fuel is more than covered by the extra 5% petrol you are left with Great clear vid

[@andymorrow1597]

Most small engines are designed and safe with upto 5% ethonal. Which means super unleaded is safe to use same as e5 95 Ron.

[@WhosPhotoTube]

Esso Synergy Supreme+ 99 is actually ethanol free (except, due to technical supply reasons, in Devon, Cornwall, North Wales, North England and Scotland)

[@Bugsworth]

Thank you Mick and Riley for the clear and handy information: Big wave and Best regards g from Nottingham :-)

[@themowerman]

Thanks very much

[@Turningwrenches85]

Great tip on removing ethanol

[@offshoreman71]

High octane gasoline actually burns slower than lower octane fuel. One thing that I add to my fuel to help clean up the engine internals is acetone. Adding acetone has kept me from having to tear down and clean up many carburetors.

[@offshoreman71]

@@thejupiter2 , Yes sir it does. That's proven science. Low octane fuel burns faster and causes octane ping in an engine. There's only 2 ways to solve it, 1st you can slow the burn rate by using higher octane fuel or 2nd you can adjust the timing and retard it to keep it from pinging The reason I add acetone to my fuel is to act as a solvent. It works well for that.

[@offshoreman71]

@@thejupiter2 , if you doubt what I have said, Google "does low octane fuel burn faster ". Let me know what you find.

[@wesman7837]

@@thejupiter2 you only need higher octane fuel if high compression, and heat are causing predetonation (pinging)(knocking) as some call it. That's why some of the high compression engines run alcohol. Sam is right lower octane fuel detonates easier.

[@onefixitman]

In the USA I live in Palatka, FL and about 5 miles from my house there is a petrol station that sells Ethanol free fuel. I use ethanol free in all small engines that I use. Good video. I purchased a small battery operated fuel pump like you have from Harbor Freight for about 8.5$ USD and it works great.

[@xzqzq]

Whenever I see ' ethanol free ' for sale, I am always curious about what was in the tank prior....

[@bergeracvandamme]

Great video. I'm hoping this is the channel that will show me how to fix my poorly Ransomes Marquis 51...

[@themowerman]

I have about 6 videos on a full restore on a Ransomes marquis

[@LincolnSP150]

Ethanol shouldn't be mixed in to begin with. Thank you for showing to remove it. Great Video .... Bravo !

[@AmbachtAle]

You need a conical fermenter used by homebrewers, they hold about 20 liters and have a tap on the bottom. You will have to put a smaller exit line so you don't lose everything if you mess up. They are usually hdpe so it should stand up to gas. Downside is it isn't transparent.

[@CailenCambeul]

Homebrewer here from Australia. The fermenters I've used come in black and also white. However, with the food colouring, that should be good enough to see through and use with the white fermenters. About 20 litres, yes. There's also larger ones at twice that and more. As for the tap being a bit large, use a gravity fed bottle filler (with a filter if you want) with a hand trigger or bottom of the bottle pin/valve. Add a length of clear hose and any reducers you think are needed, watch the colour change and shut off instantly. Or mix it with fuel spillage pump equipment for extra speed via the optimum mix of creativity.

[@atlantajunglepythons1744]

I'd have to guess that fermenting equipment is not as cheap as, say, watercooler bottle with a cheap, plastic or better yet bronze|brass tap, at the bottom. Drink the watter AND then cheap source of bottles. Just don't store gasoline long term in them. Ok for a day or two tho, IME.

[@alansmall9071]

Thanks for a great tip great to have a way of getting around the governments way of taking petrol engines out of commission Riley boy’s a good lad keeping check on things 😉👍🏻👍🏻

[@cphank3722]

Great video Mick. If you don't want to waste anything, I've seen on Steve's Small Engine Saloon in which Steve used the ethanol/water mix in his ultrasonic cleaner. It seems to improve the cleaner's performance.

[@themowerman]

Yeah I have seen that.. it's not something I would use.. but thanks for the comment mate

[@derrenlambert2279]

I do this for my 40 year old lambretta, also got E10 viton seals.. save your engines and do this for small engines.

[@bonzey1171]

It'd be well easy with a separatory funnel on a ring stand, like a chemist would do. That last bit you poured off and left the water, that's known as decanting in a lab situation Nice one mate

[@themowerman]

Thanks bud

[@jamesdobbins3155]

Can you separate the ethanol for use in a camp heater that uses alcohol separating water from ethanol

[@mortneff4674]

Thanks for the info! Just might try that!

[@nigelburton3908]

I like the video mick great stuff. But I think I would keep adding the colour because if it doesn’t affect the end result it’s a great way of seeing when to stop syphoning off the water. 👍

[@byteme2102]

I use regular gas in all my small motored equipment. At the end of each season, I add a small amount of Sea Foam to the gas tanks of my mowers, weed trimmer, and snow blower. Then I run them for a minute or two to circulate the mixture thru the carbs. Then I drain the gas tanks, put a bit of oil in the cylinders, and store them all for the winter. In the spring they start 1st pull every time. They are all at least 10 years old (the snow blower is 15) and they all still run like new.

[@roberts5118]

After you drain the gas tanks then you should start and run the engine until it burns up all of the remaining fuel in the carburetor. Then put the oil in your cylinders and store them for the winter.

[@byteme2102]

@@roberts5118 Yes, I neglected to mention that. I run them until they stall out.

[@jeffkiehne2545]

The alcohol water mixture could possibly be converted to vinegar or re distil to use in alcohol heater or fireplace.

[@brianconnor1810]

Good info there. Thanks for that.

[@oldelmo8788]

Brilliant sir, Loved your video

[@knighthawk86855]

Don't mean to post so often, but I found out a way you don't have to shake, use the battery operated pump turn it on, stick it in, say a wide mouth container, turn on the pump, let it start pumping, keep the nozzle in the container, and stir with the pump end, soooo easy and much faster, just a tip I discovered.... Now to let it sit and separate.

[@martinburgess4814]

Thank you for a most informative video, Mick,good to see Riley so happy, all the best to you all

[@themowerman]

Thanks mate

[@tonysaberwal8895]

Yes - very clever indeed. In the meantime I guess we will use E5 Super Unleaded till they stop selling it. Also - my VW T25/T3 Camper will also have to use the E5 Super Unleaded. Thanks for the tip.

[@michaelregan4332]

Thanks Mick from Louisiana, USA.

[@russellpetrie119]

its like going back to the days when they stopped doing 4 star feul only able to get unleaded where they put ab additive in the feul

[@JunkmailAccount]

Generally quite informative; although higher octane would be better described as less flammable, resisting premature detonation (knock) better.

[@chatrkat]

Brilliant!! Here in Chicago and surrounding areas, E-10 is all we can get, or we must buy engineered fuel @ over $20. US per gallon at Home Depot. This is amazing.Mick, thank you.

[@themowerman]

Your very welcome

[@chatrkat]

@@themowerman I’ve been a subscriber for a while too. I enjoy your channel a lot. Best wishes to you and Riley. ~Keith~

[@themowerman]

@@chatrkat thanks mate I appreciate your support

[@tonyalways7174]

Brilliant. Really appreciate the tip 👍🏻

[@sstorholm]

I've been running E5 and E10 in small engines for years, and haven't seen any problems so far. It's a lot down to humidity, a dryer climate equals less humidity for the ethanol to absorb. Winterisation is also key, I've found that I have a lot less issues with carbs gumming up if I store all small engines in a moderately heated space. Best trick so far however is to run the last few tanks on acrylate petrol before storing the device, that stuff never goes off and doesn't go stale either, and it won't break the bank if you just use it for a couple of tanks at the end of the season.

[@lkeil84]

I have many small engines, and every year I would have to take all the carburetors apart and clean them. What a pain in the rear. When I did this method 2 years ago, I pulled all my machines out and they all started right up and ran great. I also put fuel stabilizer in the mix.

[@mrkoolio4475]

What is acylate petrol

[@lkeil84]

@@mrkoolio4475 I have no idea.

[@mrkoolio4475]

Bryan Keil well you said it in your original comment?

[@lkeil84]

Hmm, if you say so... I don't see it though.

[@Herbybandit]

You need a Mr Funnel fuel filter, it filters the bits out but more importantly it separates water out of petrol.

[@hikaru9624]

Sir or Madame I want to thank you for this! I don’t know if it will help my car but it will definitely save my mower.

[@stansbruv3169]

All right! You guys make quite a team! Nice work. Thanks for the information.

[@themowerman]

Your very welcome

[@richardbaumeister466]

Brilliant!!!! Thank you so much

[@rogerbinny1996]

Brilliant video lots of information too .. Would pouring the liquid produced through lint gauze work to separate fuel from water mix ..

[@themowerman]

Thanks. Hmm I have no idea worth a go

[@minot.8931]

No, it wouldn’t. Ethanol does not stick to lint gauze. It would just all run through and then separate out again.

[@stevoj8959]

I don't know anyone other than Bruce that knows what is really in their gasoline. Don't know why they put it in in the first place. I am fortunate to have one station that does not have Ethanol in their fuel, yet. Good job on the experiment, everyone can see the results. Stevo

[@EQINOX187]

They put it in because they are pushing the rubbish that is lower emotion which is just utter rubbish based on data from the US that proves it increases emissions as E10 produces less power so the car has to burn more to get the same level of power add to that the massive fields that need to now be used to farm the crops used in ethanol production and all the diesel burned inits production and transport not to mention the emissions produced to refine the ethanol. It is clear the environmental misinformation they are pushing is just a distraction and i think those that made the new law have huge shares in the ethanol production

[@stevoj8959]

@@EQINOX187 Good point. They make it easy for big business to mislead the public.

[@lylek8933]

Good to know; just gad they still sell alcohol free gas where I live (for now). Just as a side, I did leave gasohol in my lawnmower over the winter and low and behold, the engine wouldn't start. Took it to the repair guy and he said there was water in the tank and gasohol attracts water (as you said). No longer worry now that I use non-ethanol gasoline for my lawnmower. :)

[@mr1pearl]

Great video Mick 👍