MikroTik - Configuring VRRP

[@Joshv918]

Amazing Video.. 90% of what ive learned ive learned from your videos!

[@Joshv918]

Your videos are the best !!

[@JOSCAJU]

May I use this to SIP failover to avoid one way communication when the primary WAN goes down?

[@Anavllama]

Can you post the finished EXPORT Configs of both Routers for perusal ( and a snapshot of the IP routes for completeness )

[@TheNetworkBerg]

I will be rebuilding this lab for v7 and make a video on that, I'll share the lab files with the video once it is uploaded.

[@Anavllama]

@@TheNetworkBerg Most excellent and be sure to make one of the ISPs dynamic, iSP1 to R1 static, ISp2 to R2 dynamic. Spice it up . by adding failover to the other ISP "-)

[@tcc5750]

I'm looking to implement this for my small business. We use a RB4011 and CCR2004, how would we get both on the same WAN or would I need to buy a secondary connection for router 2? I'm curious if OSPF or VRRP would be a good fit.

[@adrianmego1]

Thanks Johnny!

[@md.rubelhossain660]

Hello Sir, Could you please make a video on VRRP configuration in more detail. If you will then it will be a great pleasure to me. Thanks in advance.

[@TechieLAB]

Thanks for the video. Could you please make a video about load balancing to two WAN links best practice?

[@thefixitgal]

Thank you

[@forex-chart-analysis-daily]

i have 2 isp and two mikrotik router i can do it?

[@alitech2001]

can we use this with PPPOE Server

[@forex-chart-analysis-daily]

in this method i can use un managable switch? and 2 diffrent isp

[@paolo7086]

Is possibile to contact you for particolar vrrp config.8 ip on Wan tank's

[@MdAlamgirHossainChannel]

doing great job sir!

[@TheNetworkBerg]

Thank you for the kind words!

[@GTech-IT]

What is the Network simulator you are using?

[@TheNetworkBerg]

I make use of EVE-NG :)

[@GTech-IT]

@@TheNetworkBerg where to get all appliances (router, switch, cisco & Mikrotik etc.). I there any all preinstalled vm?

[@TheNetworkBerg]

@@GTech-IT Nothing is preinstalled, you need to supply the images yourself, you can get Cisco images from their site, Juniper from theirs and MikroTik from their site. Though MikroTik is probably the easiest to obtain as it comes with a trial license.

[@GTech-IT]

@@TheNetworkBerg I have install mikrotik, trying to install cisco. do you have 2960X image..

[@TheNetworkBerg]

@@GTech-IT no sorry :( It's also not allowed to share images between users. I would speak to your Cisco account manager to get the images... Else Google can be your friend.

[@CC-BCC]

Can VRRP be set to use the Bridge port instead of a physical ethernet port?

[@TheNetworkBerg]

Sure, I've used bridged VPLS interfaces with VRRP and that worked just fine.

[@CC-BCC]

@@TheNetworkBerg Thank-you very much for you quick response. Much appreciated.

[@ujemvi]

I really like your videos man. You could do a video about Mikrotik and VLANs, since their implementation is a little weird.

[@danielr6692]

Easy peasy! Thanks a lot! Great Job! well explained!

[@royhardy467]

Can you make a VRRp using any 2 similar routers

[@TheNetworkBerg]

Hi Roy, yes VRRP is industry standard, you could mix and match different routers or even vendors like a cisco with a juniper though this is generally frowned upon as neither vendor will want to support you if you are having issues with the hardware regarding the VRRP.

[@АлексейСтерх-ь2в]

(RU)Спасибо. А каждый маршрутизатор подключен к своему каналу Интернет? А если один канал? Можно его дать и на первый и на второй маршрутизатор через коммутатор?

[@TheNetworkBerg]

В этой демонстрации да, есть два разных канала. Если ваш интернет-провайдер позволяет вам, вы можете подключить кабель к коммутатору, который соединяет оба маршрутизатора с оборудованием провайдера, предпочтительно через VLAN, так что это то, что я хотел бы обсудить с интернет-провайдером. Приносим извинения, если перевод с помощью Google Translate немного неверен.

[@АлексейСтерх-ь2в]

@@TheNetworkBerg Thanks a lot for the answer. I meant a little different. Let's say we have a dedicated IP. Can I accept it with an L3 switch and redirect it to 2 routers in the VLAN? It turns out that both routers will have the same Internet IP. One router is working, the second is in standby mode. So does this protocol work? Or will badaboom happen? What a pity that it is impossible to insert an explanatory picture!

[@ilar10N]

put a video about DHCP relay

[@altverskov]

What tools are you using? In browser, I mean

[@TheNetworkBerg]

Hey there, I am making use of virtual emulation software. What you are seeing is EVE-NG Pro, I do have a video and playlist on my channel showing how to install this. kzbin.info/aero/PLJ7SGFemsLl1fw8IeI91I6PRONNQrtizP

[@46119]

Hello! I bet your videos are really useful but man can you do something with this microphone? I feel like I am hearing beatboxing... Thanks!

[@TheNetworkBerg]

Hi Jay, the video is pretty old. I have since then upgraded some of my recording equipment and spaces. Thanks for your suggestion.

[@46119]

@@TheNetworkBerg Thanks man! You are absolutely right. At first I did not notice the date of the video but then I saw your newer ones and the sound is really great. Thanks for the reply! 🤓

[@TheNetworkBerg]

You're welcome, might be a good time for me to rerecord an updated VRRP guide since there has been some changes with it with RouterOS version 7.

[@geogmz8277]

First like of your video.. 🤘

[@TheNetworkBerg]

Haha thanks Geo :D!

[@geogmz8277]

@@TheNetworkBerg what do you use to make your thumbnails?

[@TheNetworkBerg]

@@geogmz8277 I am using an online editor called canva, it has templates specifically for KZbin thumbnails, previously I just made a presentation in Googledrive and took a screenshot of that.

[@md.mijanurrahman8344]

@The Network Berg Your video was good. prescribe me, R1 or R2 router wan goes to down what next..????