Budget Race Car Build - Part 31 - Start Button Install

[@indy007jones]

finally someone that explains how to do it! thank you.. Being that this is a race car i think i would solder the wires on just incase vibration causes it to come loose. the last thing you want is it to come off during a race.

[@TheNuggetProject]

Yeah good suggestion, I've done about 20 odd days on track with it so far with no issues, but still a good point. :)

[@name-mb2rz]

This channel is a hidden gem

[@TheNuggetProject]

Thanks man, appreciate it! :)

[@creedkisling233]

BEST VIDEO on how to wire one of these BY FAR!!!!

[@takochavez9889]

Thank you man! Installing on a Mitsubishi diamanté 1998 LS and it came with no instructions whatsoever, lifesaver 🙏🏽

[@TheNuggetProject]

No worries! glad it helped you :)

[@timtrial3971]

it's a bit late now, but the 2nd wire on the start position goes to the ecu and circuit opening relay. It does on a starlet at least. I hope this helps someone

[@TheNuggetProject]

Good info! Thanks mate :)

[@jaydanstanton-keir3442]

Hey mate, i got a starlet and im doing this. The car cranks over for a second then it turns off. How do i keep it running?

[@TheNuggetProject]

@@jaydanstanton-keir3442 hrmmm hard to know without seeing your wiring but kinda sounds like you're only powering your starter and not your ignition

[@Ryan3621]

Have to say, many times i've driven late at night or very early morning and when you're on the freeway belting along for a couple of hours in pitch black, dimming the lights does make it a bit easier haha

[@TheNuggetProject]

Like the old saabs with stealth mode, hit the button and it cut all lights bar the speedo, so random!

[@TheTurbineEngineer]

Zero chance I would've figured this out if it hadn't been for this video... thank you!!

[@TheNuggetProject]

You're welcome mate glad I could help :)

[@tylergardner2356]

Going to do this to my Silverado.

[@tony3745]

Best video to wire these switches also the 3d print class was great

[@frankthomas1226]

Bruh, great video. Very informative and basic instructions. Entertainment at its best. "because racecar" best reason ever.

[@TheNuggetProject]

Cheers Frank! yeah, i use the 'because racecar' excuse a lot hahah, why not hey! thanks for watching :)

[@davidcraft4909]

I dim my gauges lol. I'm a truck driver and if I'm running all night I will dim the gauges I think it helps you see at night on country roads.

[@TheNuggetProject]

Yeah I'm hearing this a bit I've always had old Toyota's and Subarus and I think the gauge clusters have always been really dim, I'm sure other cars are way brighter!

[@dalegrixti]

"Has anyone ever actually dimmed their gauges in their car?" **Gingerly raises hand** In my defense, I got the wrong brightness LED's and my cluster lights up the cabin it could almost be the door light... That switch pod is done really well, quite jealous of your CAD abilities and having a 3D printer!

[@TheNuggetProject]

I think the gauge cluster in every car I've had has been really dim, LEDs would definitely blind you

[@lachieplays8002]

This came out while im on my way back from winton look like your having fun with your excel

[@cheetahgaming3642]

lol what was out there today? I was out there on the Sprint Round 4

[@TheNuggetProject]

nice! you have a good day?

[@lachieplays8002]

@@TheNuggetProject yeah it was really nice perfect for the excels in 3rd and some times 4th gear cant wait to see your excel there.

[@TheNuggetProject]

Yeah mate just sorting my license now will be there asap :)

[@michaellorah9051]

Did you use the relay that comes with the panel? If so where should the 12v power to the relay come from? The only video I found that uses the relay made no sense to me because he had the power to the relay come from the push button which would defeat the purpose of the relay at that point.

[@TheNuggetProject]

Sorry mate I did all this over two years ago, since then I've redone the wiring on three street cars, I really can't remember. However if you google start button wiring diagrams there is a metric tonne of information on this in the form of wiring diagrams, blogs and videos, see what you can find :)

[@michaellorah9051]

@@TheNuggetProject thanks for such a quick reply. I'll keep looking.

[@ledchickenfpv7164]

Don't feel bad about putting that switch panel in your race car just because you wanted it. I'm trying to figure out how to wire the indicator lights I just realized it had, to work on my simulator rig for iracing etc. 😆 So I'm connecting it to a PC with a USB arcade joystick interface. I'm hoping the lamps will light up with the 5V I have easily available on the interface board. I realize this video is quite old, but thought you might find this amusing, if not timely. That switch panel must be a very popular item, because I got the identical one off Amazon, and I see at least 3 other videos with the exact same assembly shown in their thumbnails. BTW, dimming dash lights/gauges helps you to see better when driving on unlit roads. Some if not all models of Saab have a button that kills the lighting on everything non-essential, even turning off the lighting on the upper range of the speedometer. Clarkson once claimed on an old Top Gear episode that when he asked Saab what technology from their fighter jets had been used on their cars, the "vitals only" dash lighting button was it. Granted, I'm not trying to land on the rolling and pitching deck of an aircraft carrier running "dark", but I believe it's helped me avoid several close encounters with deer because I saw glints of reflections from their eyes significantly before they came into headlight range.

[@TheNuggetProject]

Haha, yeah i've wired all sorts of dumb stuff into my racing sim in the past, why not hey! I think i've just never had a car with a bright gauge cluster, every car iv'e had has always been cranked up and never bothered me at night, the stereo screen has always been much brighter than the gauge cluster even in dimmed mode!

[@wishnuikhsan2203]

I just wanna asked, are still available dashboard for Hyundai accent/excel in Australia? Because in Indonesia there are none new dashboard in here😅

[@TheNuggetProject]

Hey mate, new dashboards are almost impossible to find, however there are a couple of companies that make fiberglass replacements for race use that are pretty cool! :)

[@wishnuikhsan2203]

@@TheNuggetProject really mate? Fiberglass dashboard??? Cool indeed.. can you give me name of the company or website for that dashboard? I wanna see it... thanks mate for your hospitality... Keep updating your race Excel race car.. I love to watch it 😁😁

[@nismob3]

Awesome video bro, just subscribed 👍 Any wiring diagram with a relay ?

[@TheNuggetProject]

Thanks mate :) relay as in adding a relay to the switch? Wouldn't be hard and probably advisable too, don't have a diagram but you'd just run the ignition feed through the relay and just make your new ignition switch power the relay on, should be fairly straight forward :)

[@talpalatnyizold]

I thinking about the same, just what if, if accidently shut off the main toggle switch while I driving??? Can I close that red cover completely down without switch off the engine?

[@TheNuggetProject]

Hey mate, where my seat is and when i'm strapped in i have to extend my arm all the way out to reach the switch, it's miles away from teh steering wheel there is no way i could knock it while driving unless i was doing some pretty wild stuff with my arms haha. If you put the red cover down it turns the switch off so the cover has to stay up, but yeah, no issue at all so far and i've done 3 track days with it :)

[@DjJerryofficialChannel1]

Hello, is there a light for the red round ignition push button ? I think that button can light up also. Not sure though. Thanx

[@TheNuggetProject]

No idea bud, i think you can get them with a light in them, i can't remember if mine does or not, :)

[@108077854]

For anyone in the future reading this. The red engine start button does light up

[@fussion3703]

Can you still lock the car and use regualr key fob functions? Can you also still start with the key barrel? Thanks mate!!

[@TheNuggetProject]

Hey mate so this is purely for my race car and non street use. I can physically lock the car with a key but that's about the extent of the security, if someone gets in they can just start it. This car is locked up in a garage and only brought out for test or race days. If you have a look on the video you will see I completely remove the ignition barrel and this car never came with central locking or fobs so none of that is an issue :)

[@Barefootdan]

One way to add security is to also wire in a hidden kill switch. Although not great, its an easy deterrent. These days there are also RFID switches too. Essentially a presence sensing key.

[@TheNuggetProject]

Yup. But once again for me, this is a race car kept locked up in a garage, I'd never remove the ignition barrel and security on my street cars

[@mikedavis9923]

At night I looked to dim my dashboard to the point I can just see the gauges and no more. When driving at night I have a hard time adjusting from light back to dark. I prefer it just stay dark.

[@TheNuggetProject]

Yeah i'm hearing that a lot, i think i must be the weird one haha

[@willyames9463]

Do you need a working ignition cylinder for this? Mine just broke and I figured since Im going to track my project id install one of these.

[@TheNuggetProject]

Yeah mate this replaces the ignition barrel if you want, well thats how I worked mine anyway :)

[@MotivatedALFA]

This is pretty late but i just finished my wiring at its not cranking. I did the ignition wire and the starter wire but in your video you have 2 starter wires i only have one. What does the 2nd wire go to on the starter?

[@TheNuggetProject]

is this on an excel mate?

[@MotivatedALFA]

@@TheNuggetProject I'm not sure I have a 1991 jeep Cherokee

[@TheNuggetProject]

@@MotivatedALFA ok so this vid was on a Hyundai excel, so you will have to figure out that wiring for your Jeep using a multimeter as every car is different wiring wise, sorry bud but without working on it myself it's hard to help :/

[@MotivatedALFA]

@@TheNuggetProject i have constant 12v, ignition wire, and starter wire. What am I missing?

[@TheNuggetProject]

@@MotivatedALFA Ah mate I really don't know, this was years ago. Usually you at least have an accessory power wire, ignition power wire, possibly ecu power and started. But honestly I'm really not sure what's going on with your setup bud,

[@Wardy75]

Race car! Great video. Would the installation be as simple as that if the car had an immobilisor and transponder?

[@TheNuggetProject]

Na this is really made just for track cars, no security or anything like that. I'm sure you can do it with an immobilizer but someone defeats the purpose.

[@nismob3]

Great video man and great success 😊 Is this upgrade still need a key (in the ignition) to make the switch work?

[@TheNuggetProject]

Cheers bud, so the way i did it, it completely removes the key barrel, so the car has no security, but as this is a racecar there really isn't much of an issue there. I did do one on an older car and left the key in the system so you still have to turn the key and then press the button

[@SupraJoel]

Awesome video but would be best to fiberglass the switch board mount. You will also probably have glass left over to make more things for car. Fuel line mounts, etc

[@TheNuggetProject]

Cheers mate, why do you say fiberglass instead of my 3d printed piece? it's been in the car for ages now and works great, any benefit to making it out of fiberglass? sounds like a lot of work to me.

[@StevenSzabo-j6t]

Hi. Thanks for the video. I realise it's a long way down the track but I'm just setting up an Excel track car. With your diagram you have a written list of 6 wires but show only 5 connected (no black/white). In the video on the on-off switch you mention that you have a Blue, Blue/red and a Black/red, Should this be the Black/white instead of the Black/red as you also have a Black/red and a Black/yellow to the starter switch, or am I seeing things wrong (or not seeing things). Do you sell any of the printed housings such as the panel mounting Gauge mountings etc.

[@TheNuggetProject]

@@StevenSzabo-j6t Hey mate, Ah man honestly you've hit the nail on the head I can't remember at all it was so long ago. Best bet is to grab a multimeter and just do some quick checks and then you'll be 100% sure :) As for gauge pods and stuff for sure, I make heaps of parts now. Check out my website www.thenuggetproject.com and hit me up on Facebook or Instagram if you wanted any parts. Sorry I can't be more help with the wiring, I probably should have drawn up a proper diagram when I did this, I didn't realise so many people would refer to it!

[@jaydanstanton-keir3442]

Hey mate i know this is very late now but how did you turn the car off with the switch because when i do it mine does not turn off at all. And also i want to make it turn on with out needing the key how did you make it do that

[@TheNuggetProject]

oh man, honestly without seeing what you've done i wouldn't know. if you wired up your ignition wires through the switch there should be no way that car can run once ti's switched off so you've obviously got some sort of ignition power still running to your fuse box and ecu, but once again without seeing it i have no idea. If you use a multimeter and figure out what each wire is you really shouldn't have any issues.

[@r3ckzanarper148]

Mm great video super helpful. seems super easy question is am i able to do it on my jeep Offroadin rig

[@TheNuggetProject]

Hey mate yeah I dont see why not but bare in mind you want have any security, any old person can jump in your car and start it this way.

[@r3ckzanarper148]

The Nugget Project im not too worried about security but thank u for the heads up 🙏🏽

[@TheNuggetProject]

@@r3ckzanarper148 no worries bud, just get yourself a multimeter and figure out what your wires do, easy done :)

[@surion42]

Any way I can wire in individual sections of accessories into the acc switches? I.E. the radio, the gauge cluster, and all other misc items?

[@TheNuggetProject]

Yeah no doubt mate, in the video i show you how to use a multimeter to figure out which wire does what, use this method to figure out your accessories etc, and then work out your wiring for gauges and radio etc it's all basic circuits so figure out which is which and then run power through a switch to that items power feed :)

[@adrianmunoz2636]

So I connected everything but my immobilizer turned on how do I disable that? 😅😅😅

[@TheNuggetProject]

Hahah I can't help you with that bud, would completely depend on how your immobilizer is wired in!

[@FunkyLove04]

Excellent video, could you give me the name of the programs that you also used a link to buy that machine you have ... Thank you

[@TheNuggetProject]

Are you talking about the 3d printing stuff? If so i'm using old autodesk software that you can't get anymore, you're better off using fusion 360, great program, as for the printer, i used my old Anet A8 for this but any budget machine will print this, i'm now mainly using an ender 5 plus :)

[@Icecream_Unicorns]

Hey mate, what model 3d printer are you using there and program would you recommend. love the finished job. Excellent finish

[@TheNuggetProject]

Hey mate sorry for the late reply, so i'm pretty sure when i made this i printed it on my old anet A8 which is just a cheapo machine but does well if you spend the time building it properly and doing some upgrades, i'm not using an Ender 5 plus which has a big build plate for larger prints, i'ts not bad, definitely needed a lot of tweaking to make it print right. As for cad programs i'm still using an old auto desk program called 123d design, but it's not available anymore, i'd recommend learning fusion 360 which is free for personal use and a great program, you'll just need to sit there and do the tutorials to learn it :)

[@jaysonstemper3954]

Can i still start the car also with the key if it’s mounted or not?

[@TheNuggetProject]

The way I've wired this up no, but there are plenty of videos online on how to wire up a start button with the key barrel still in

[@tturi2]

I'm using your videos to help me piece together my ef xr6 racecar haha

[@TheNuggetProject]

Thats awesome mate i hope you can find a bit of useful info in there, if nothing else learn from my mistakes :)

[@tturi2]

@@TheNuggetProject cheers man

[@tynandill926]

How long did the starter button last before it burnt up...? I bought two of these and installed them and the starter button burned out in a couple of days and several uses.. roundabout the same time. Just curious if yours ever burned out...

[@TheNuggetProject]

Na man still going strong to this day :)

[@tynandill926]

@@TheNuggetProject you wired in the relay switch with it ?

[@TheNuggetProject]

Na just the standard ignition wires, it basically just replaces the key barrel so it's not overly high voltage on this car.

[@tynandill926]

@@TheNuggetProject damn, I need to figure out why my setups keep burning out...

[@TheNuggetProject]

Yeah definitely too much voltage going through it :/

[@austinmccoy2356]

i hate to be the one to ask this... how do you know which wires are which? I cant find a wiring diagram anywhere for my car.

[@TheNuggetProject]

Hey mate if you watch the video I actually show you how to use a multimeter to find the correct wires, you don't need a wiring diagram.

[@76homerj]

Hey mate. Awesome channel. How did you remove the key barrel? I can’t find anything on google or KZbin? I can see at the end you have it out. Thanks.

[@TheNuggetProject]

Cheers bud :) key barrel is easy. Put the key in and turn it to on, on the side if the barrel casting you will see a little button (brass from memory but dint quote me) push that in and pull the whole assembly out :)

[@BIGJEZAUS]

awesome vid kind of wanna do it it my accent but it's my work car lol have you bypassed the clutch switch yet? I'm in the middle of doing mine now.

[@TheNuggetProject]

Cheers mate, yeah I bypassed it and put another switch in there hidden in the car as a kill switch for if kids are sitting in the car and mucking around at the track they can't start it accidentally :)

[@BIGJEZAUS]

@@TheNuggetProject ok sweet is it just cut the wires at the switch and hook them up to a toggle switch? I just didn’t wanna cut anything and it didn’t work Got everything pulled apart just taking my time to do it the right way

[@TheNuggetProject]

@@BIGJEZAUS yup pretty much :)

[@BIGJEZAUS]

@@TheNuggetProject ah ok sweet thanks heaps dude 🤙

[@garrard_garage]

You could always use one of those accessory switches for your fog light switch instead of cutting a hole for the original switch

[@TheNuggetProject]

Yeah absolutely, however the stock fog light switch had about 5 wires going into it and i couldnt' be stuffed spending the time figuring out which wire did what so i just spent the 30 seconds to cut the hole and mount it, was easier :P I've already used one of the switches on that panel to silence my low oil pressure alarm and i'm sure i'll use the other two in the future for something else :)

[@garrard_garage]

@@TheNuggetProject aw damn, that makes sense, would have been cool though

[@TheNuggetProject]

@@garrard_garage I agree :) all good we'll put more gadgets in and use the switches for something fun ;)

[@dsmjaime]

hello, this process seems pretty easy, how could i possibly do this but have a bit of security along with it (aside from a hidden kill switch)

[@TheNuggetProject]

Hrmmm not sure mate, if you want security i'd leave a key barrel in the car personally!

[@SuperTambo69]

I know you can get them on Ebay, but where did you get yours - good quality?

[@TheNuggetProject]

Yeah just an eBay one mate, it's fine all works as advertised :)

[@luna_lifts]

is there any way you could wire the air conditioner to power on with an accessory switch? great vid by the way

[@TheNuggetProject]

Cheers mate :) with the way i've wired this up there isn't an accessories switch any more just the one power switch goes straight to 'on' i do'nt think there would be much point wiring the A/C to accessories anyway as the engine has to be running to run the AC pump, engine doesn't run on accessories therefore no AC

[@nicholaskoenig3106]

A 3d printer?! Hows THAT for a lil R & D custom shop. Noyce!

[@TheNuggetProject]

Haha yup, iv made a heap of parts for my cars and I sell brake ducts, gauge pods and a bunch of other stuff for the excel race series, it helps me fund this channel :)

[@RyanPlayzYTGaming]

So shortly put, I put the accessories and ignition cable and the constant power to the switch and only the starter Motor to the start button?

[@TheNuggetProject]

If you want to wire your car the same as me (baring in mind this is a track only car that has no accessories in it and is intended for race track use only) then yes, one side of the power switch has the ignition and accessories wired together as i don't need to be able to switch to accessories to run stereo etc, the other side of the main switch is constant power, the start button one side has ignition power on (looped from the main on switch) and the otherside is the starter motor cable. I really should have put more of a disclaimer on this video, it was a last minute idea that i didn't think would interest people and it's now one of my highest viewed videos... eeep

[@therealjukismo]

i've used the start button of this set for my lawnmower lmao

[@TheNuggetProject]

@@therealjukismo haha sick

[@therealjukismo]

@@TheNuggetProject yeah wel since it basically blew off i figured... also doing it on the simulator and i plan on adding back a regular key starter to the lawnmower

[@TheNuggetProject]

@@therealjukismo it blew off? Like in the wind?

[@therealjukismo]

@@TheNuggetProject it failed but made sparks and flames

[@TheNuggetProject]

@@therealjukismo oh man brutal, mine has been fuxking n the car since this vid with zero issues :) luck of the draw I guess

[@edwardmitchell6825]

where did you buy the switch panel from

[@TheNuggetProject]

Just ebay mate :)

[@Zukes454]

What material did u use to print the housing?

[@TheNuggetProject]

Petg, same stuff I use for all car stuff, oil resistant and more heat resistant than pla etc :)

[@Zukes454]

@@TheNuggetProject Oh yep that's the one, thanks turned out awesome mate, need to do the same to mine lol

[@flashgordon6238]

Cool, but I would have mounted it overhead :)

[@TheNuggetProject]

Haha yeah that would be cool, not sure about extending ignition wires up to the roll cage though, might be more of a street car thing :)

[@M.H.K11]

Where did you learn all this?

[@TheNuggetProject]

Honestly mate just watching videos, reading stuff and experimenting

[@djcriss9778]

Hiiii! Can you help me pleaseee I just need to know what kind of wire can I use from button to ignition? 12V 40A?? Pleaseee

[@TheNuggetProject]

I'm not great with wire gauges but id say that would be more than enough :)

[@crawfordpetterson5209]

Any chance this could help me out, my ex threw my one and only key out on trash day

[@TheNuggetProject]

Oh dude that sucks haha. If it's a street car though I'd go to the wreckers and pull the key, ignition barrel and door locks out of another car of the same make and model and install them, that way you still have security. If you do this there is zero security anyone can get in, start your car and drive off

[@crawfordpetterson5209]

@@TheNuggetProjectit's not a big deal its more of my fun Sunday drive car, I did see those button starts that I get one of those proximity key things, I was just wondering if any of it was doable without my key

[@TheNuggetProject]

@@crawfordpetterson5209 yeah of course, the switch and button just replaces the ignition barrel :)

[@crawfordpetterson5209]

@@TheNuggetProject well sweet, here I was worried about steering lock or something, I'll just do that instead, like $20 for a kit vs how much my local locksmith would charge

[@geneaguirre]

What are the odds of buying a switch panel housing off of you?

[@TheNuggetProject]

Hey mate shoot me a message on my Facebook page facebook.com/thenuggetproject The issue I find is most people run bolt in cages where the upright actually sits right where that housing is, as my cage was a custom built one the arms in a different spot :/

[@geneaguirre]

@@TheNuggetProject awesome. Just messaged you.

[@YulianBrickPrime]

How do i know which cabel is for the starter motor?

[@TheNuggetProject]

Hey bud in the video I show you how to use a multimeter to check the wires and figure out what they all do.

[@TrainsForever]

0:59 my answer to everything I want to do

[@betosgarage]

🤣

[@lucasflafandersen219]

how about the immobilizer or is that been coded?

[@TheNuggetProject]

Immobilizer? There isnt one bud it's a very cheap car from the 90s

[@lucasflafandersen219]

@@TheNuggetProject ahh okay. i just really wanted to install a startbutton like that in my car but i have immobilizer

[@TheNuggetProject]

@@lucasflafandersen219 is it a race car or a street car? I definitely wouldn't recommend doing this to a street car. You can. Install a start button in a street car with an immobilizer but you will still need the key and the ignition barrel and then use the button to trigger the starter motor instead of turning the key to trigger it

[@lucasflafandersen219]

@@TheNuggetProject yeah iknow and that would just be stupid but i could code away the immobillizer. here in denmark it isnt that big a problem with theft

[@TheNuggetProject]

@@lucasflafandersen219 sure, but you won't need to if you leave your key and ignition barrel in, i did that to my street car, it still has the key but starts with a button. I wouldn't recommend doing what i've done in this video to a street car, you lose the ability to run just accessories and have zero security, as i've said multiple times in the comments on this video, this is a race car, it's locked up in storage and only goes to the race track and back so security isn't an issue.

[@YulianBrickPrime]

Okay but how do i know which cable does what? That is confusing me a little bit

[@TheNuggetProject]

Hey bud, all the info is in the video from 3 minutes onwards i show you how to test each part of your ignition barrel to find out what each wire does. Do you have a multimeter? if not go grab one from bunnings for $20, then just ground out the black wire on your multimeter (attach it to something metal in the car that's not painted) then you can put the red one on each point at the back of your ignition barrel and find out what thye do, if you are on a wire and you switch your ignition to 'acc' and the box lights up saying there is 12v then you know that wire is the accessory, same goes for every other wire, as you turn the key you will see if there is voltage or not, the starter wire will only show voltage when you start the car. I'm not sure what else to tell you but honestly if this is too complex you should probably get a mate or an auto elec to give you a hand with it.

[@jordanrobinson7359]

Can you still use the key? Or can your car still pass mot with this mod?

[@TheNuggetProject]

Only for race cars bud, this car will never be driven on the street again.

[@jordanrobinson7359]

But can you still use the key?

[@TheNuggetProject]

Not the way I've wired this but you can wire in just a start button with a key yes, I did that to my daily, search on KZbin for start button install there are hundreds of videos on how to do it

[@Jakuans]

So the key use for unlock stereng

[@TheNuggetProject]

I removed the steering lock bud so no need for a key

[@tabbyt-bolt300]

I do dime my lights in my cars 😂

[@TheNuggetProject]

yeah i'm hearing that a lot in the comments of this video! looks like i'm the weird one haha

[@Mrtrunks]

Thanks for C.A.D Tip

[@TheNuggetProject]

Cardboard aided design is the way to go! :)

[@stevenwills559]

Where did you get the button

[@TheNuggetProject]

Hey mate hundreds on Ebay, Amazon, or pretty much anywhere online

[@bigbrax7730]

Can you program a key to this ?

[@TheNuggetProject]

Hey mate this setup is for track use only, if you just want to run a start button there are hundreds of videos on KZbin telling you how to install one on your road car

[@Vl0gWithAb]

Can you show me every single part you used in this video please?

[@TheNuggetProject]

Hey mate, you will find everything you need for this in a 30 second google search. Not having a go, but if you can't even google the parts i don't think you should be pulling apart and rewiring your ignition on your car!

[@peterbuilttough3406]

in the UK earth=ground

[@TheNuggetProject]

And in Australia we drink beer cold, what a culturally diverse world we live in :)

[@TheNuggetProject]

Wow. Calm down mate, just having a bit of fun on a random comment. Let's keep it civil hey champ.

[@paulfalco9197]

"so I ordered suspension...." No doubt you've ordered one of the allowed shock/spring packages in the CAMS 3E Circuit Excel regulations. Really hoping you've gotten involved with your local CAMS affiliated Excel racing club, who would have informed you that the category rules are under review right....now. The rules for next year onward are being checked by the AMRC (Aust Motor Racing Commission) to be ratified by CAMS before the end of this year. And it's looking very likely from all the lively debate within the clubs over the last 8 months that a single make/model is to be the direction forward...and it may not be what you ordered. In the CAMS series, when your car is inspected and issued a log book the suspension in it is also recorded. If you do the log book after the beginning of 2020, which is when the new rules are likely to take effect, your suspension might not be compliant anymore. So to beat the new rules you may wanna get log booked before the end of the year with whatever suspension you've chosen, and then you'll have how ever many years the changeover period is to get use out of what you bought. As a racer for the last 4 years in a Korean taxi, I've followed your build with interest. It's great to see someone showing how it can be done in your shed!

[@TheNuggetProject]

Hey mate, yeah i've been following this rule change closely, and i got to the point where the car was 99% done and just needed the suspension (if you saw my shakedown vid you would see how shagged the stock ones were!) i did the right thing, spoke to the right people and contacted the vic cams representative for the excel series, the advice given to me was 'wait until the end of the year and we will have a decision on which suspension you should get' as a racer you know the thought of putting my car in the shed for 5 months while they make a decision just wasn't going to happen,so yeah i bit the bullet on a set of the old control suspension and as you mentioned i'll get the car log booked on that, so at least i can run that for a couple of years until i'm forced to change it. Right now i just want to get the car out to track days, hill climbs, motorkanas, whatever! and i need the suspension to do that. I'll explain more in the next video which should be out this week, at the end of the day i just want the car on the track so i can have some fun with it :) Appreciate you watching the vids though, lots of muppeting but i think a few people are getting something out of it and it shows that you don't need much experience to do this sport and have a crack at building a car yourself :)

[@matteopassaro5296]

there's only 1 problem: if someone can open your car he can start it without the key ahaha

[@TheNuggetProject]

*facepalm* yup that's why I've stated this is for my racecar, not for a road car, you wouldnt put something like this in a street car for that very reason.

[@thatflywelshguy9662]

just wait until you knock the guard closed while driving and the car shuts off... Switch should be guarded on.

[@TheNuggetProject]

HAHA, well i've been on the track a bunch of times with this setup and its no where near my hands, i have to fully extend my arm to flick it on, if i hit this while driving it means my hands are completely off the wheel and i'm waving them around like Kermit the frog :P But you do your car your way, i'll do mine my way :)