My Best Wood Finishing Tips For Wood Turning

[@dennislively6549]

You are a gentleman and a scholar to give us your tips, thank you.

[@ThePapa1947]

Thank you Dennis I appreciate that! Thanks for watching, Gary

[@GordonRock1]

Hi Gary. I found something useful about the 21st Century. I’ve been sitting in the hospital for about a week waiting for them to figure out what to do about my appendix when I realized that I could watch your video on my phone using my Bluetooth headphones. Great innovation! Don’t know why it took so many days to get to using it. Must be my extremely high IQ! Wonderful video with great information, Gary! The pieces are all superb! Stay well, …..Gord

[@ThePapa1947]

Sheesh Gord why are you watching some crazy old white haired man while in the hospital. That could be dangerous if you have a laughing attack!!! Seriously sorry to hear what is going on and sure hope they get you all fixed up. Did they just discover it was your appendix? Seems like they know it right away when you go in. At least they did my wife many years ago. Take care and all my best my friend, Gary

[@GordonRock1]

Apparently I have a very unusually shaped appendix. The first time I came in to see what was wrong they didn’t even find it. Sent us home and said if it hurts again come back and see us. They must have put the ‘A’ Team on it this time. Only took four or five hours to diagnose it. Now it’s waiting for someone to do something about it. Thanks for the kind thoughts, Gary! …..Gord

[@gaylegreer9798]

Tom here; This was SOOO helpful!!! Can't thank you enough!!!

[@ThePapa1947]

Thank you Tom. Happy it helped. Thanks for watching, Gary

[@daleguthormsen8555]

Ive used deft for 50 years great finish. number one fot gloss finish. paste finish great for a more satin look. min wax 3rd but still fine finish, particilarly when rubbed on with jumerous coats. great video!

[@ThePapa1947]

Thank you Dale. I have used Deft for over 60 years and recently did a video using two boards I made something with in high school. They were finished in deft back then and what I made from them this year was also finished in deft. Have a look I think you will like the results. And thanks for watching, Gary kzbin.info/www/bejne/n5TTlYycbsSVla8&ab_channel=ThePapa1947

[@grammybear4226]

🐼 Big Bear Hugs from a 67 yr old grandma in Kirby, Texas, USA 🐼 🖤🖤🖤.....

[@ThePapa1947]

Thank you so much Grammy Bear!

[@RickTurnsWoodturning]

Great video, Gary!

[@ThePapa1947]

Thanks a bunch Rick. I appreciate you watching and commenting. Gary

[@radarthewoodturner8912]

They all look great Gary but I would have to say the sanding sealer and acks is my favorite keep turning stay safe👍👍👍👍

[@ThePapa1947]

Thank you radar and the one you like is the easiest and also gives a wonderful natural finish. Take care, Gary

[@roberthall8244]

Best finishing demo I have seen in years. Thanks for all the good stuff you show us on The Papa 1947.

[@ThePapa1947]

Thanks so much Robert I appreciate you taking time to leave your very kind comments. Take care, Gary

[@54lespaul77]

Thanks for that Gary. It will be a video I look at a few times. Finishing is the “mystical” part of wood work, where the magic happens! Cheers, Rick

[@ThePapa1947]

Thank you Rick, and yes it is the part that everyone looks forward to and it should be done with as much care as everything else. But each step you do you need to prepare for the next and they all lead to the last step which is the finishing. So turn as smooth as you can and sand it to as good as you can get it. I have been known to sand it again after putting the sealer on because I missed a few scratches or decided on a different finish. Take care my friend, Gary

[@54lespaul77]

@@ThePapa1947 More good advice! My impatience has several times led me to a disappointing final product. Lately I’ve even taken a few things, remounted them on the lathe and completely sanded the finish off then sanded them properly before refinishing them. Quite a different outcome! Always look forward to videos from you. I think I’m pretty much caught up on your previous ones. Cheers, Rick

[@normswoodworking36]

I have watched many of your videos and am enthralled by your talent. As a "newbie" wood turner, I have a lot tot learn and you have taught me a bunch already. This is the first time I have been able to leave a comment, because I watch on the TV and it won't allow me to make comments. The computer is the answer.

[@ThePapa1947]

Thank you Norm. I am happy you are enjoying my videos. I have never watched videos on the TV but ours does have KZbin on it. No matter how far along you are on your turning journey it will all be fun. I did my first turning in a grade school shop class in 1961. I was hooked with turning and all types of wood working. Thanks for watching and hope to hear how you are doing. Take care, Gary

[@denocro3586]

Yep still going through the archives Gary. That was an excellent demonstration and answered a lot of questions. Cheers Gary. Deno

[@ThePapa1947]

Thank you Deno. That was a fun video to do. Happy you liked it. Gary

[@daveurban1018]

Thank you for showing us how to make the wood prettier.

[@ThePapa1947]

Thank you Dave and thanks for watching, Gary

[@golf2actual375]

Now this is the kind of information I need at this point in my "career." Thanks

[@ThePapa1947]

Thank you and happy it helped. Happy turning, Gary

[@sonyhk3824]

The first one is so shiny. Thanks Gary 👍 💯 thumbs-up

[@ThePapa1947]

Thank you Sony and yes it really had a deep shine. Thanks for watching Gary

[@oldrudedog]

I've been using Deft Lacquer since wood shop in high school in 1963. I built a small book case and finished with Deft. I just recently reglued the case but the finish was still good.

[@ThePapa1947]

Very interesting! I first used it in high school shop class in 1962. Maybe we had the same teacher LOL. Mine loved it, where did you go to school? Gary

[@angusestcourt7120]

perfect timing... i am about to finish a big piece and have had to re sand as the finish was not good. thank you for the time you took to educate us. cheers from the U.K

[@ThePapa1947]

Thank you very much Angus. Happy you found the video useful. Best of luck on your finish. Take care, Gary

[@lesliegrimm4344]

Love the kitty porch,wood grain is nice too.

[@ThePapa1947]

Thank you Leslie and I think I like the kitty porch the best. These 2 guys have not been allowed outside. We have always had indoor outdoor cats. When these guys were kittens 3 years ago we lost our adult indoor outdoor cat to a coyote. There are too many around now to let these guys out. We live near a golf course and a large nature area. So a Catio it was and they are loving it. Thanks for watching, Gary

[@MANJITSINGH-ko2oi]

That last piece had a beautiful grain. weldone.

[@ThePapa1947]

Yes it sure does!

[@SiamWoodShop]

Great video Gary, thanks for sharing, take care, John

[@ThePapa1947]

Thank you John and thanks for watching. Gary

[@dougpeters4395]

I agree that all three turned out beautiful. I think that each finish has its place in the turning shop. Thanks.

[@ThePapa1947]

Thank you Doug and I agree and use all 3 plus a number of others. Thanks for watching. Gary

[@jasonjohnson3605]

I think what you built for your beautiful cats was awesome ! I know my kitty would surely like one of those ! Your a good fur parent as well Phil. Plus some very good info on finishes. You the man Phil !

[@ThePapa1947]

Thank you Jason. Happy you like the Catio. I know Phil has a cat to because I saw it in person. Just in case you are not sure I am Gary and appreciate you watching and commenting. Gary

[@jasonjohnson3605]

@@ThePapa1947 OMG ! I'm so embarrassed. I had just watch a couple of his videos too. Oh Jesus man. Ok I'm going to stick my head in the mud for , i don't know ever ! So Sorry Gary

[@josephcraft2845]

They’re all pretty. It’s hard to say which one I like best but I can tell that the knotted piece has beautiful graining

[@ThePapa1947]

Thank you Joseph, I like the same one you do the best as well. Thanks for watching, Gary

[@PattersonPatch]

Oh and I am sure the cats will love being able to partial go outside on the little enclosure. Our get to go out in the enclosed porch.

[@ThePapa1947]

Oh yes for sure they love catio Byron. We got these 2 as kittens 3 years ago and we were about ready to let them be indoor outdoor cats. The adult cat we had was and they always watched him through the window. Sadly we lost Scooter to a coyote and that ended well over 40 years of indoor outdoor cats for us. There are just way to many coyotes around now. We live close to a nature area and golf course. So I finally broke down and made them this. That was a concern as well but I built it very strong. And do they love it!

[@gaowoodlab]

Great video, wonderful finishing,👍👍👍👍👍

[@ThePapa1947]

Thank you Gao and thanks for watching, Gary

[@mountainviewturning5319]

Nice finishing tips

[@ThePapa1947]

Thank you 😊

[@davidmiles9342]

Wonderful. I need to play with different finishes. Beautiful piece of wood.

[@ThePapa1947]

Thank you David. I use many types of finishes based on the wood and what I am making. Thanks for watching and commenting. Gary

[@ACKSWOODPASTE]

Thank you so much Gary for putting out this video, we get questions every day, now I can refer to this video to help us out!!! Thanks again.

[@ThePapa1947]

I felt I do not spend enough time on getting my finishes on so this video was made for that. Each step is critical to getting a nice finish and I wanted to show the products I used on most of my turnings. If each of these products are used you can easily get a finish you will be happy with. Take care, Gary

[@mpart_woodlathe-stuff]

Thanks for this great video Gary. It goes a long way in taking the mystique out of finishing wood. You've done everyone a favor for sure !! Thanks for sharing🙏 Take care. -Mike😷

[@ThePapa1947]

Thank you Mike! I was hoping to show it is not some voodoo secret going on to get a nice finish. When I say it is not that hard that is what I mean. It can be worrisome when you get to that point. I recently build a very big information desk and trust me I was concerned about the finish. It is the first thing seen. I had test board to see what I liked. I went with my first choice. Wipe on oil based poly. Thanks for watching, Gary

[@mpart_woodlathe-stuff]

@@ThePapa1947 👍👍

[@raysandy5561]

Thank you very much. I enjoyed and learned as much from this video as the turning videos.

[@ThePapa1947]

Thank you Ray. Happy you enjoyed the video. Take care, Gary

[@kandiecandelaria3134]

Great info! Thank you for sharing. I never think my finish is nice enough

[@ThePapa1947]

Thanks Kandie, the finish is as important as any part of the project. This process is fairly easy to get a very nice finish. But sanding is very important part of getting that great finish. Best of luck, Gary

[@mvecellio1]

I like the sanding sealer followed by the Acks products the best. Especially for a bowl. Great video. Mike

[@ThePapa1947]

Thank you Mike! That is what I do if I want to use it for food such as nuts or popcorn. On a show piece I like to put a nice finish on it then polish it up with the Acks products. Which I just finished doing on a video that will be uploaded soon. Take care, Gary

[@teebowers2273]

I like the first one best, then the third, and finally the second.

[@ThePapa1947]

Thank you very much for watching and commenting. On these that is the same choice for me as well. Thanks again, Gary

[@BeaverCreekCreations]

Thanks for this lesson. I have a lot to learn from a master craftsman. Please keep the lessons coming. One finish I like to use is hut friction polish. I get mine from penn state ind. Thanks again Stanley Langford Beaver Creek Creations

[@ThePapa1947]

Thank you very much Stanley. I have a video that shows how I make my friction polish. I part shellac 1 part boiled linseed oil 1 part denatured alcohol

[@davidcampbell1312]

Lacquer is my favorite for durability.

[@ThePapa1947]

Yes I also like lacquer as well for that. Thanks for watching

[@PhilAndersonShadyAcresWoodshop]

I think the lacquer is always my favorite finish of yours, Gary. Just always has a nice warm glow to it. The Acks sure does a great job. This video is going to be very helpful to turners for years to come. Great job, buddy! My cat is sitting here watching with me, in between dozing off. I woke him up and replayed the Catio part a couple times. He made his usual, tiny sound he makes when he wants something and then looked up at me, quizzically, like, "hey, I need me one of those!" I wish I had time to build him one. In the mean time, if a box shows up and you hear this little meow coming from it, just consider him on vacation and put him up in the Catio suite! Phil

[@ThePapa1947]

I also like the Lacquer finish as well. I think I am getting lazy because I seem to be using more Polycrylic. It just goes on so easy it is hard not to use. But today I went back to oil based wipe on poly. Perfect for what I turned giving it a very nice warm look. I was thinking of starting a CB&B...Cat Bed and Breakfast and we will have reasonable rates if he cares to stay. No promise I will send him back because we saw him and he is a cutie. We just do not feel safe letting ours out with all the coyotes around here. Golf course at the end of our dead end street and a huge nature area. We lost our Scooter to one 3 years ago and these guys were kittens so we have never let them out. I do hope more see the video as it seems a lot get a bit worried when it comes to putting the finish on. They should also be using shellac after seeing how great yours looks after you put it on. Take care, Gary

[@cposwn]

Thanks for sharing Gary.

[@ThePapa1947]

Thank you for watching, Gary

[@tonyisham9396]

Great craftsmanship bud

[@ThePapa1947]

Thanks so much Tony!

[@dennisrood1469]

Thanks it helps old man new to the turning world (71)

[@ThePapa1947]

Thank you Dennis and happy it helps. Not so old if you was to ask me! Take care, Gary

[@michelehiggins1878]

Thank you so much for this video. I am a rookie turner with only one year under my belt. I have struggled mightily with high speed finishes and I very much appreciate the education on these alternatives and how beautiful they are. Thank you!

[@ThePapa1947]

Thanks so much Michele very happy it was helpful. I hope this shows there is not mystery to getting a nice finish. I do know that it a big concern for many. I can hardy wait to get to this point but I do know that every step up to putting the finish on is very important and nothing can be skipped. Thanks for watching, Gary

[@cortlandhunt4721]

Great information Gary, I think I preferred the one done with Deft and Acks.

[@ThePapa1947]

Thank you and for sure I have to agree with your choice. Take care, Gary

[@cortlandhunt4721]

@@ThePapa1947 when I used the minwax finishes I like to use the high gloss on the first two coats then go to the semi gloss after, I think it gives a deeper finish. Very similar to the Deft finish.

[@BAILEYWOODWORKS]

Again, another video I will be saving and watching many times! Thanks for this one!

[@ThePapa1947]

Thank you Chris I am happy you enjoyed it and hope it was of use for you. Take care, Gary

[@jannitert6576]

Thank you Gary!

[@ThePapa1947]

Your welcome Jan I appreciate you watching, Gary

[@paulsimmons390]

your finishes are great. I liked the lacquer finish the best.

[@ThePapa1947]

Thank you Paul and I think this time the lacquer was the king. Take care, Gary

[@cathynaito847]

Thank you for all this information. as i am new to turning and want ease of use!

[@ThePapa1947]

Thank you for watching Cathy and this is real easy for sure. Gary

[@jimbalz3017]

I've watched this several times. Good stuff!

[@ThePapa1947]

Thank you Jim. Happy you enjoyed the video. Take care, Gary

[@normswoodworking36]

The fact is, I had a woodshop class in high school in 1950 and learned to use the wood lathe. I still have lamps and bowls I made. Seeing you cutup the shelving boards and make a beautiful bowl was interesting. I continued in woodworking while in the Air Force and beyond. Not until about two years ago did the lathe-bug hit me. I only have a mini, so limited on what I can turn, but have enjoyed segment bowls and much more. Did I email with you a year or so ago about making the stars? That was a great help and I now put stars in the bottom of most bowls as my "signature". I too have used Deft for many years and it's my go-to finish, except for where I use mineral oil and bees wax for a food-safe finish. Thanks for your response.

[@ThePapa1947]

Thank you very much Norm. Nothing wrong with having a mini lathe. Good to hear you are still turning. Deft lacquer is certainly one of if not my most favorite finish. I do recall an email about the starts and they are easy and fun to make. Nice to hear from you and keep up the great work. Gary

[@woodturningwithDave]

Thanks Gary, great finishing tips Great video Thanks again. Dave

[@ThePapa1947]

Thanks so much Dave and you can use your favorite sanding paste in place of what I used and it will work as good. Take care, Gary

[@jefferyhunter1665]

Thank you for sharing your finishing process and products.

[@ThePapa1947]

Thank you Jeffery and thanks for watching, Gary

[@josephsmith452]

Love them all Gary. Thanks for sharing methods and favourite finishes. Take care my friend. Joseph

[@ThePapa1947]

Thank you Joseph, happy you liked them. Take care, Gary

[@1954JDR]

Thank you so much for the lesson.

[@ThePapa1947]

Thank you James and thanks for watching, Gary

[@keithedwards1038]

Gary, you’re my kinda guy! I painted car’s for almost 40 year’s before I retired. So the knowledge of finishing work is etched into my soul. But I always learn from you. You don’t know how much id really like to meet you someday sit down and talk about turning wood. I think we’d get along well.

[@ThePapa1947]

Thank you Keith. Painting cats certainly needs attention to details. Pretty much in the prep work. Same as wood. Where are you located? Thanks for watching, Gary

[@keithedwards1038]

@@ThePapa1947 I’m in Upstate Ny

[@monopinion8799]

There is no price value for this level of expertise information. I am quite fortunate to view and learn from your videos. You and a few more mature woodturners are certainly a gift for the inquisitive minds. Thank you.

[@ThePapa1947]

Thank you very much Sylive for your very kind words. Much appreicated. Have fun wood turning and thanks for watching, Gary

[@gaetancrepeault9333]

Gorgeous grains color beautiful finishing Thank you surprise wood and the first

[@ThePapa1947]

Thank you Gaetan I appreciate you watching, Gary

[@TheMessyStudio]

Thanks, Gary! This was very helpful!

[@ThePapa1947]

Thank you Billy happy it helped. Take care, Gary

[@WoodenItBeNice]

1st. Hi Gary, My favourite is the Sanding Sealer and Acks. It has a fantastic sheen to it not a shine. It's just my personal choice and nothing against the other two finishes. Great video Gary with lots of useful information. Take care my friend. Cheers, Huw

[@ThePapa1947]

Thank you Huw and to me all finishes have a place and that is why I use many different ones. I have not found a 1 size fits all when it comes to putting the finish on. Today I am using Wipe On Poly oil based and I will talk about why on the video. Thanks for watching! Cheers, Gary

[@daveurban1018]

Thank you for the finishing tutorial

[@ThePapa1947]

Thanks Dave and thanks for watching, Gary

[@williamrice2683]

Thanks for great demonstration

[@ThePapa1947]

Thank you William and thanks for watching. Gary

[@ThePapa1947]

Thank you William and thanks for watching. Gary

[@trurex007lee7]

Thank you Gary for investing the time and energy in creating this informative video. Each finish has is own purpose and luster, all are great. Especially glad you will be using the “platters” in another project.

[@ThePapa1947]

Thank you very much. There is always a use for little pieces like these. Thanks for watching, Gary

[@deanweeks7956]

Thanks so much for the great info.

[@ThePapa1947]

Thank you Dean I appreciate you watching, Gary

[@TheTinyWorkshop]

Very good information Gary. All three finishes have their own look. Good to see the differences now. I save this video in a playlist so that I have it at hand if needed. Thank you for sharing!

[@ThePapa1947]

Thank you Frank and for sure there is a use for each one. Take care, Gary

[@tommartin3200]

Lacquer, Acks paste. Thank you.

[@ThePapa1947]

Thank you Tom and I think it did come out the best as well. Thanks for watching, Gary

[@brianjoneswoodturning3682]

Very interesting to see your method and choice of products, all of which gave a good finish :-)

[@ThePapa1947]

Thank you Brian happy you liked it. Gary

[@markv1027]

They all look great Gary but I do like the Polycrilic finish. Thank you for the informative video.

[@ThePapa1947]

Thank you Mark and I have become very fond of the Polyacrylic finish. Although today I finished something with Minwax Wipe On Poly which is oil based. Thanks for watching, Garu

[@trueitbycjtruitt9546]

Very pretty, thanks for sharing this with all of us

[@ThePapa1947]

Thank you and thanks for watching, Gary

[@oneturnatatime6309]

Very informative and thank you for sharing your knowledge 🙏

[@ThePapa1947]

Thank you and thanks for watching. Gary

[@zetuskid]

Gary, my mind was swirling until you showed the 4th piece with the poly also and it convinced me to go with the Poly. It sure gives a deep finish and just highlights the grain beautifully. I want to give you a big thumbs up for doing this finishing lesson. Man, you used a lot of Acks Sanding Paste & Polish for this demonstration and I know that stuff is not cheap. So thanks for giving us three great choices. No more excuses now!😉

[@ThePapa1947]

Thank you my friend, I do like my Polycrylic! It really does not take much of the Acks to do the job. I noticed after editing the video I put 4 times as much as is needed on the last piece. What I liked is all 3 finishes go on the same so you can decided on the look you are after. Take care buddy, Gary

[@davidbuchan2224]

Hey Papa - this was super useful - realised I'm using way too little of everything - especially the sealer and grit! And lucky cats! Although disappointed not to see turned columns on the corners! ;-) Happy New Year.

[@ThePapa1947]

Thank you David. Those two guys are spoiled enough LOL. Thanks for watching, Gary

[@jonmartineau1004]

A great video Gary . In some cases I would choose the Lacquer but my favorite right now is Shellac so I would have to go with the Shellac disc .

[@ThePapa1947]

Thanks Jon! They all are my favorites and for certain places and wood. I finish a lot of natural turnings with shellac. Most segmented things get lacquer or Polycrylic. Thanks for watching, Gary

[@loriboldt6171]

Thank you so much for this video! I can't even say how grateful I am that you did this! I didn't realize that you need to use some kind of a sealer before the Ack's....Thank you so much Gary!

[@ThePapa1947]

Thank you Lori. I have always used a sealer first. I have seen others skip the sealer. I am sure the instructions says to use sealer. I have found it gets a better finish by using sealer first. But I also will use it after putting many coats of lacquer or other finishes and then use the abrasive paste and polishing paste. I did that on my last video and it is one of the nicest finishes I have done. Thanks for watching, Gary

[@claytonbink1647]

Thank you, Gary, for a very informative video!!

[@ThePapa1947]

Thank you Clayton for watching and commenting. Happy you liked the video. Gary

[@patkim8633]

This is very good information that I wanted. Thanks a lot, Gray.

[@ThePapa1947]

Thank you very much Pat, happy it helped. Take care, Gary

[@jackthompson8019]

They are all beautiful finishes.

[@ThePapa1947]

Thank you Jack happy you liked them and thanks for watching, Gary

[@donaldtrabeaux5235]

Thanks for sharing your tips , take care stay safe god bless

[@ThePapa1947]

Thank you Donald and thanks for watching. God bless you as well my friend, Gary

[@klg1216]

Great illustration of the differences. The Acks does look good without the under coats but the depth of the finishes under the Acks really shows through. Thank you

[@ThePapa1947]

Thank you and yes it does look good. I feel there is a place for all kinds of finishes and they all can look good. Thanks for watching, Gary

[@carolriley8472]

Wow, Gary, they are all so gorgeous...I love Ack's Abrasive Paste!

[@ThePapa1947]

Thank you Carol and it sure does the trick!

[@DaveGatton]

Great video Gary. All of your examples look great. I am a big fan of Deft lacquer also. Thanks for taking the time to do a video like this. 👍

[@ThePapa1947]

Thank you Dave and I have a lot of things around here finished in Deft. As a matter of fact I have 2 Walnut boards glued up and made an all around 2 shelf stand in 1963 that are finished with Deft. That is what we used in high school shop class. And glued with good ol Elmers wood glue. Joints still good after all these years and have been in my garage for many years. I plan on making a segmented turning out of them one of these days. Thanks for watching, Gary

[@janeoverby2151]

I like them all! Ordered some Ack's I can't wait to try it. I use shellac and paste wax right now. I'm excited to try the Ack's pastes.

[@ThePapa1947]

Thanks for watching and the information. I have never used brads so I can not speak for it. I know that if I keep buffing the polish with a clean cloth it does not leave a waxy feel. But you do have to make sure you get it polished off. Again I have not tired tung wax and appreciate your input. Thanks for watching, Gary

[@ThePapa1947]

Thank you Jane and I also like all 3 and depending on what it is going on I will use all 3. Today I am using the Minwax Wipe On Poly which is oil based. Looking at the piece of wood is why I chose the oil based. And I probably will not polish this finish out. I think you will love using the Acks. Thanks for watching, Gary

[@garthkeck2003]

I think each of these finishes has its place. Hard to pick one. I'm a fan of natural log turning like Phil does. The funkier the better

[@ThePapa1947]

Thank you Garth and I am a fan of what Phil does and mix it up with similar pieces. These pieces were perfect for showing the 3 finishes as they looked very much the same. Thanks for watching, Gary

[@kenschleman5263]

Thanks for the help great stuff

[@ThePapa1947]

Thank you Ken and thanks for watching. Gary

[@stuartscott9646]

Hard to pick a favorite. Nice work! I'm going to "borrow" your method of using repurposed plastic containers for the water based stuff. No more rusty cans!

[@ThePapa1947]

Thank you Stuart and I get lots of those little containers as we like yogurt. Some are perfect but some do not stack well. That is how I pick which brand I like LOL Take care, Gary

[@vernsteinbrecker3759]

Great video, informative

[@ThePapa1947]

Thank you Vern i appreciate you watching and commenting. Gary

[@kam70111]

They all look good. Matt finish, sanding sealer. If I go by the reflection of the light, polyacrylic.

[@ThePapa1947]

Thank you Khan, I think they all have a place and it all depends on the wood and the shape created. Take care, Gary

[@prsearls]

This was a wonderful side-by-side demonstration of finishes. It will help many woodturners. I usually finish my pieces with shellac or satin wipe-on poly. I appreciate the water based poly dries faster than wipe-on, especially the first coat. I also use Ack's products; they're excellent. For a high gloss finish, I buff the finishes then wax. Your sanding advice is right on. The more time I spend on this, the better it will look. There's no short-cuts here. That's gorgeous walnut and it really deserves a fine finish.

[@ThePapa1947]

Thank you very much Paul I think sanding is the number one most important thing to getting a good finish. There are a few tricks to making sure of that and I have been thinking on making a video of just that. Thanks for watching, Gary

[@jackskelton6773]

Thanks 👍👍

[@ThePapa1947]

No problem 👍 and thank you!

[@gregjohnson8486]

Thank you for posting this video. I've not been turning long and have been using 2 coats of Myland's Sanding sealer (sanding between coats), abrasive paste and T & T Original for my projects. Now, thanks to your video, I have more options. 👍🏾

[@ThePapa1947]

Thank you Greg. Sounds like what you have been using is a good option as well. Thanks for watching, Gary

[@JordanWoodwerx]

Thanks Gary, great finishing tips buddy! I’ll pick the sanding sealer with acks pastes! Just the right sheen! Great catio!! Well done , take care my friend !

[@ThePapa1947]

Thank you Bruce, I do like the finish with the sealer and Acks but for segmented turning I choose the other. And I enjoyed making the Catio. These 2 guys have waited 3 years to taste the fresh air. They were kittens when we lost our indoor outdoor cat to a cayote so we never let them go out. So I gave in and built them this even though I was still concerned. They really love it! Take care, Gary

[@MrDilmaher]

Great video gary I love them all but I think I will try the lacquer one keep them coming have never used polycrylic so will try that in the future thanks again for your very informative videos

[@ThePapa1947]

Thank you Daemon and I like both of those finishes about the same. For sure the Polycrylic is worth trying. Take care, Gary

[@wandapiedra8973]

Great video!👏🏻👏🏻 I always used DEFT I love it.👍❤️

[@ThePapa1947]

Thank you Wanda and I got hooked on Deft in a high school shop class. I still have a half gallon of it I have not used because it is easier to buy a spray can than to clean my sprayer LOL. I did buy a sprayer meant for using lacquer and just have not tried it. Thanks for watching, Gary

[@woodworkingskillwithsagar8802]

Nice information about wood finishing touches take care.

[@ThePapa1947]

Thank you Sagar I appreciate you watching, Gary

[@peteg4526]

Thanks for making this video. I’m just getting starting with woodturning and I’m almost ready to finish a piece that I really like. I’ll try the polycrylic method on some scrap and see how that goes.

[@ThePapa1947]

Thank you very much and thanks for watching. I love using the Polyacrylic. It is easy to use and does a great job. Gary

[@gracephilp8766]

Thank you for the through information......I've been using shoe polish and briwax and getting what I thought were good results but this is in another league.....I've still so much to learn.

[@ThePapa1947]

Thank you Grace, happy it helped. You finish does sound interesting. Not sure if I have heard of using shoe polish. I think if you try any of what I showed you will really like it. Take care... Gary

[@ThePapa1947]

Thank you Grace, happy it helped. You finish does sound interesting. Not sure if I have heard of using shoe polish. I think if you try any of what I showed you will really like it. Take care... Gary

[@kandiecandelaria3134]

Very nice

[@ThePapa1947]

Thanks so much. Happy you like it. Gary

[@tommyschutz9008]

Thank you for sharing your knowledge with us. I have used a sanding sealer, and then buffed it on the Beal buffing system. The projects turn out nice, but the finish doesn’t seem to last. I like the example you showed using the deft. Now the steps: you sand the finished product to 400 grit. Then how many coats of deft. Then you apply the abrasive, then the paste wax Thanks again

[@ThePapa1947]

Thank you Tommy! I will use as many as 10 coats of Deft sprayed on. Depending on the wood mostly. If the wood is hard then 4 or coats will do the job. All depends how much I sand between coats. The finish might look very smooth after spraying but when you sand with 400 you will see if it is a little heavy in places. This will give you the most level finish and will show more depth. Thanks for watching, Gary

[@Secondlifeofwoodturning]

I never thought to use Ack's pastes on lacquer base. It really makes lacquer more smooth and shiny. A lot of new tips I have seen in Your video, Gary and I will test them on my next projects. Thank You for this video 👌 It's great. Stay safe my friend. Rav

[@ThePapa1947]

Thank you Rav it is sort of like using abrasive paste on epoxy to get the shine. To me it gives it that little bit extra. Take care buddy, Gary

[@bryanholden6487]

Thanks Gary, a great and saveable piece of info. Well presented . :-)

[@ThePapa1947]

Thanks so much Bryan, happy it helped. Take care, Gary

[@markbahlke9091]

This is great stuff Gary. Good to see side by side comparisons of different finish methods. I really appreciate your patient thorough approach. Makes me want to get out there and go to work. And do some videos too. Can't wait for next week. See you soon.

[@ThePapa1947]

Thank you Mark and have fun in the shop. Love to see some videos if you do make them. Take care, Gary

[@gilvb51]

Great video Gary! Thank you for these different finishes. They all seem pretty easy!

[@ThePapa1947]

Thank you Gil and I think they all make very nice finishes. Take care, Gary

[@GarryKWV]

Great video! Lots of good information. Thanks for all you do, I've learned a lot!

[@ThePapa1947]

Thanks so much Garry I am happy it has helped. I think putting the finish on can be a struggle but this is a very easy way to get a great looking finish. Today I am using Wipe On Poly oil based. It works just like the water based and I like it for other reasons as well. I plan on mentioning that in the video I am doing on this bowl. Take care, Gary

[@kevinbooth2063]

Very nice I am also in getting ready for finish. Great information. I am making an urn for my Puggle that past away 2 weeks ago. I need to know what I should use to seal the inside. I think I will go with the lacquer on the outside. I liked the finish. The wood I am using is black walnut. Thanks

[@ThePapa1947]

Kevin so sorry for the the loss your Puggle I know how that feels. I think I would just use a sanding sealer. The Zinsser Bullseye should work. If you can reach in you can just wipe a few coats on with a rag. If not you can brush it as well. You could also brush lacquer based sanding sealer or thin down brushing lacquer. At least that is what I would probably do. Best of luck, Gary

[@kevinbooth2063]

@@ThePapa1947 Gary thank for your sediments. I had Oscar for 15.7 years. This will be my first real box. I have made many turnings but all for practice. I made a captive ring golf tee for my grandson. I would send a picture of it but I’m not sure how to get it to you. Thanks Kevin

[@ThePapa1947]

@@kevinbooth2063 you can send it to [e-mail]

[@Bramsshed1913]

Good video on the finishes Gary ! I would say that the Acks sanding paste is very similar to the "Yorkshire Grit" we use here in the UK

[@ThePapa1947]

Thank you Bram and I think you are right even though I have not used the Yorkshire Grit. Take care, Gary