Рет қаралды 31,705
Hello everyone. Today in this video I am going to show you how to replace #Samsung Galaxy #Note10+ Original Screen. I have tried my best to make the video shorter but still it's about 14 minutes long as I had to cover up all the bits and pieces.
I have used a couple of pro tools to perform this replacement. You may use ordinary hair dryer and Philips screwdriver instead of automatic screwdriver.
If you're interested to get the genuine Replacement screen part, then you may ask me.
The highlighted task is Below (DEAF GUIDANCE )
1. Remove the battery back cover. (keep in a clean place, as the back cover comes with a built-in camera lens on it.
2. Unscrew all the screws that you could see.
3. Disconnect all flex connector include the battery connector first, now remove the metal and plastic all shield along with the NFC coil.
4. Now gently remove the Mainboard. (DO NOT TOUCH ON THE CAMERA, IF YOU TOUCH IT MIGHT BE LEFT YOUR FINGER MARK AS A RESULT PICTURE QUALITY WILL BE EFFECTED.)
5. Remove the charging board, but don't forget to remove a screw in there first.
6. Now this is the time to remove the charging connector along with flex.
7. Now take out the vibrator which has strong glue underneath.
8. Finally, remove the battery, which has strong glue under the battery. (check how I did)
NOW REVERSE BACK WHAT YOU DID AS THE VIDEO TUTORIAL GUIDANCE AND HOPE YOU WOULD DO IT SUCCESSFULLY.
REMEMBER THIS IS JUST A INDEPENDENT GUIDANCE WHAT I DEDICATED IN THE INTEREST OF HELP. PLEASE DO IT AT YOUR OWN RISK!
=================================
Follow us: / thepcphone
follow us: / thepcphone
follow us: / thepcphone
like us: / thepcphone