How to build Lian Li Evo RGB with TL LCD fans and more (detailed PC build guide)

Prawn here with a detailed guide on how to setup the Lian Li Evo RGB. Here I'm showing you how to setup, install and wire this case and all the steps you need to follow to get it setup in a "standard" build.
Related videos:
Lian Li TL and TL LCD wiring and setup guide • Lian Li TL and TL LCD ...
Lian Li O11D Evo RGB deep dive with various build layouts! • Lian Li O11D Evo RGB d...
Kolink Regulator PSU setup and wiring guide • Kolink Regulator PSU s...
Detailed guide to computer wiring - everything you need to know • Detailed PC wiring gui...
Where should you put your AIO radiator? • Where should you insta...
How to choose the right PSU (which Power Supply Unit you need and how to install it) • How to choose the righ...
Do stickers and heatsinks matter for NVMe SSDs? • Do stickers and heatsi...
Is your GPU underperforming because of your NVMe SSDs? • Is your GPU underperfo...
Lian Li Galahad 2 LCD Infinity wiring guide and setup walkthrough • Lian Li Galahad 2 LCD ...
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. Unless otherwise stated, the videos are not sponsored financially.
Specs of this build (Please note links listed here include affiliate links which may earn me a commission.)
Motherboard - MSI MAG Z790 Edge TI Max Wifi • MSI MPG Z790 EDGE TI M...
CPU - Intel Core i9-13900K CPU amzn.to/3Ry7UAl
RAM - Corsair Vengeance RGB DDR5 16GB x 2 6200MHz (go.corsair.com/eKAL3Z)
NVMEs:
Corsair MP700 Pro NVMe - go.corsair.com/eK2g5D
Seagate Firecuda 540 NVMe • Seagate Firecuda 540 N...
Case - Lian Li O11D Evo RGB ( • Lian Li O11D Evo RGB d... )
PSU - Kolink Regulator 1000W PSU ( • Kolink Regulator PSU s... )
CPU Cooler - Lian Li Galahad 2 LCD SLInf • Lian Li has an AIO wit...
Fans - Lian Li TL120 and TL LCD • Lian Li now has Uni fa...
GPU - Gigabyte RTX 4070 Ti 12g OC • Gigabyte RTX 4070 Ti 1...
SSDs - Crucial MX500 2TB and Crucial BX500 2TB • How to install 2.5 inc...
See deals on the Lian Li O11D Evo RGB
New Egg - newegg.io/ncb99c1264
Overclockers - tidd.ly/47WPVL3
Caseking - tidd.ly/4at6u2K
Amazon US - amzn.to/3RQz2vW
Amazon UK - amzn.to/3TySSwR
Amazon FR - amzn.to/48aLXhZ
Amazon IT - amzn.to/3v5Dez8
Amazon DE - amzn.to/3NFz2ML
Amazon CA - amzn.to/3TEgtwt
Optional extras:
EVO Upright GPU Kit lian-li.com/product/o11de-2/
O11D EVO Additional I/O Kit lian-li.com/product/o11de-3/
Vertical GPU kit - lian-li.com/product/vg4-4/
Specs of this case include:
Model O11V EVO RGB
Case Type Tower Chassis
Dimensions (D) 478mm x (W) 290mm x (H) 471mm
Color Black / White
Material Steel
4.0mm Tempered Glass Aluminum
Motherboard Support E-ATX (Under 280mm)/ATX/Micro-ATX/Mini-ITX
Expansion Slot 7
Storage
Behind MB Tray: 2 x 2.5” SSD
Hard Drive Cage: 2 x 3.5” HDD / 2.5” SSD
Side Fan Bracket: 2 x 3.5” HDD / 4 x 2.5” SSD
GPU Length Clearance 455.7mm (Max.)
CPU Cooler Height Clearance 167mm (Max.)
PSU ATX (Under 220mm)
Fan Support
Top: Up to 3 x 120mm / 3 x 140mm
Side: Up to 3 x 120mm / 3 x 140mm
Bottom: Up to 3 x 120mm / 3 x 140mm
Rear: Up to 1x 120mm
Radiator Support
Top: 360 / 420 / 240mm
Side: 360 / 280 / 240mm
Bottom: 360 / 280 / 240mm
I/O Ports
1 x Power Button
1 x Reset Button
2 x USB 3.0
1 x USB Type C
1 x Audio
1x Color Button
2 x Mode Button
1 x Brightness Button
Dust Filters
1 x Bottom
🏆Big thanks to my super awesome KZbin members:
SirSpawnsALot, Meatykeyboard, Rawrr483, Space Cannons, Mike S, Jay Shank 007, Jason Morgan, Starastin, McFarty, Chief Hao, Kraken Tortoise, Chris Thompson, Lank Wimb, Bhushan Mahesh Gandhi, Roburrt, isgursoy, Beaster Bunny, spandauguy and Gaming Nomad.
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
Follow on Reddit / theprovokedprawn
Read this far? You're awesome. Smash those sub and like buttons!
Timestamps:
00:00 Hello
01:16 How to take it apart
03:56 Fan bracket removal
05:00 Accessories box
07:21 SSD and HDD installation
09:48 Motherboard setup and preperation
10:20 NVMe SSD installation
12:33 CPU installation
13:33 PSU setup
21:28 TL LCD fan power
23:06 Motherboard install
23:25 Front panel connections
24:46 Power cable connections
26:15 Lian Li LCD fan setup
29:17 Fan wiring tips
32:35 CPU AIO mounting
38:20 Graphics card install
38:40 Anti Sag bracket

[@dulguungantur7307]

I have a very hard job. When I get off work, I relax and watch your videos and it feels like I'm watching asmr. You deserve more.

[@TheProvokedPrawn]

Glad to be able to help you relax!

[@AuF5guy]

Just want to say, thanks to you and your videos, I was able to research and build my PC. They were super helpful. Much thanks and love from NY, USA.

[@TheProvokedPrawn]

Glad I could help! Hope that means you're subbed too!

[@AuF5guy]

Subbed for sure!@@TheProvokedPrawn

[@DenHvideHund]

First time watching your videos. But I'll be back to see more. You are relaxing to listen to, extremely thorough on the details. I'm a fan 100%

[@MrSirZa]

I can't wait for my Evo RGB to arrive. Definitely coming back to this video when the time comes! Thank you so much for this!

[@TheProvokedPrawn]

Hope you enjoy it!

[@mincraftandmore4325]

I love how informative this Chanel is, and you can almost find a review for every pc part😊.

[@TheProvokedPrawn]

Thank you. Appreciate it

[@Salvaj3]

I bought this case and I could say without a doubt that it's the best damn case I've ever built in, it has so much room, it's amazing I love my case and my RGB fans Lian Li outdid themselves and this video was spot on thanks for sharing the build :)

[@TheProvokedPrawn]

Glad you liked the video and the case!

[@sotonglzz]

Thank you for this! I'm planning to build with this case in April with a 4090 and 7800x3d. This is going to be my bible.

[@TheProvokedPrawn]

Thanks for watching and for joining the channel, very kind of you. Hope the build goes well. I've also got this playlist which might have useful nuggets in it - How to build a gaming PC: kzbin.info/aero/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z

[@ryanvicksell7266]

I'm building a new PC in this case this weekend with Lian Li infinity fans (some LCDS) and this aio! This video, as well as your ones on Lian Li fans will definitely save me time and frustration! Thanks!

[@TheProvokedPrawn]

Hope it goes smoothly. Thanks for watching!

[@EdwardTaylor-ut1xu]

Definitely a great channel. So glad I found it. So informative and you speak fantastically

[@TheProvokedPrawn]

Glad you enjoy it!

[@evanstout5071]

What an awesome build guide! I pulled the trigger on a very similar build this week and I love it! Thank you for your guidance and expertise!

[@TheProvokedPrawn]

Thanks for watching and good luck with your build

[@evanstout5071]

@@TheProvokedPrawn Quick question on the Lian Li LCD screens. I have everything running but the LCD screens are out of order. For example when I run the rocket animation the top screen shows the bottom animation, middle screen shows top animation, and bottom shows middle animation. Any idea how to reorder them? I tried rearranging the fans themselves and no change. LConnects currently doesn’t seem to have a way to rearrange the order of the screen displays. Thank you!!

[@user-ei7hn3vq7y]

I have a plan to build my dream PC very soon. I will come bakc to this vidoes for intruction of the TL LCD Fans and the Dynamic Evo RGB case. Thank you so much!!. This has been very helpful.

[@TheProvokedPrawn]

Glad to help. 👍🏼

[@Prince-mp1sk]

NEEDED THIS. I'm literally waiting on my case to start my 1st ever build. It arrives tomorrow!

[@TheProvokedPrawn]

Best of luck. Take a look at this playlist too. It might be helpful - How to build a gaming PC: kzbin.info/aero/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z

[@Prince-mp1sk]

@@TheProvokedPrawn definitely will 🤙 thank you

[@Screaming_GOAT_HD]

Great video! I'm currently working on the same build, just with a MSI RTX 4080 Super when it releases. Thanks for all the tips!

[@TheProvokedPrawn]

Glad I could help!

[@MrRayr1953]

Great job in explaining the whole process.

[@TheProvokedPrawn]

Thanks

[@thomaszinser4894]

Another great build guide. Thanks, as always.

[@TheProvokedPrawn]

No problem 👍

[@z1my247]

Thanks for the video.I learned something and relaxed when im watching.I will be here now.

[@TheProvokedPrawn]

Glad you enjoyed! Thanks for watching

[@Daniel-ur3mw]

Truely excellent video ! I like how you break it down !!!

[@TheProvokedPrawn]

Thanks Daniel. Hope it was helpful

[@I3lackI3lock]

I am waiting until this case and fans become available in my region to upgrade to this build, cant wait !

[@TheProvokedPrawn]

Hope you don't have to wait long

[@yoddy0]

The build is very nice, I really like that you can move the motherboard though because it looks to close to the bottom for my liking.

[@slipnin2darkness121]

When I put your build into pc part picker, it reads a USB 3.2 gen 2 to usb3.2 gen 1 header adapter is required. What does this mean?

[@ankursharma1461]

Awesome build.

[@TheProvokedPrawn]

Thanks!

[@zimehx]

i wish these beautiful fans light up the case a little bit more

[@LV--rd6cm]

Great vid. It would be nice a side by side comparison with the Vision

[@TheProvokedPrawn]

Alas I can't do that but there's this kzbin.info/www/bejne/qZbSY6qKfrWomq8

[@mr.phoenix2798]

I love this case bro

[@Vialli100.]

I had some old magnetic filter in an old case, so I fitted those on the side panel o11 Evo..

[@flaccus123]

I like this case a lot. Trying to decide if I should change from Corsair 5000D airflow or wait for the upcoming Corsair 6500X. The thing is I am not really into RGB, so it would be a Noctua Chromax black fan build all round.

[@venomvenom6971]

beautiful chassis! i have a question though for the evo rgb, is the vertical gpu mount possible for a reverse setup, and if it is, would it sag since there wouldn't be anything to actually hold it like in the standard build style.

[@lukestivala]

Im going for this case when the 4070ti super is out, almost all parts are the same, galahad II LCD, Lian li fans etc, so i will be following this video guide when the time comes, was wondering if would it be a good option to purchase magnetic filters for the top (if they are available) ? Thanks from Malta Europe.

[@Varowo]

Hi, could you confirm me if the horizontal anti-sag bracket accessory is included in the O11D Evo Rgb case pls? Btw I think I told you in another video but your voice is soothing and you explain things very clearly. I love it :D Thank you very much!

[@Victorious8966]

Great video! I am getting this case next week, also running with a 4070 ti AERO which actually comes with the support bracket but after watching this video I think going with the Lian Li one may be a better option. I am a little concerned with my PSU as its the Corsair switch model, meaning it has the modular plug coming from the front instead of the back on normal case setup. My concern is that with the recess that this case has for the PSU and with the switch version, the cables will actually be coming from the top. I think it may especially using this video as a reference but we shall see. White infinity reverse fans are incredibly hard to come by today so I ended up going with the SL120 which is okay as I already have them in my current build though they are v1 and these new ones are v2. I am not using the Lian Li controller as I use signalRGB to control my rgb and the controller causes latency. To get around this I have the Razer Chroma Controller which works great but needs cable adapters. Thanks for the great setup walkthrough! Very well done!

[@TheProvokedPrawn]

I used the Switch in a previous build in a Lian Li case and it was fine. you should be good.

[@Bumpyfn250]

I play Fortnite competitive and when i stream my fps is fine but i get a decent amount of inpute delay do you think if i dual PC Stream it would get rid of my input delay and make it feel like im not streaming

[@samturner3478]

Can you plug the RGB strip into the Lian Li fan hub?

[@bulufish8208]

Finally a simplified video 📹 how to assemble the product 🙌 👏.

[@TheProvokedPrawn]

Finally?

[@bulufish8208]

Many other channels edit their way thru and not showing every detail thats what i meant................@@TheProvokedPrawn

[@gmee123]

Need a second opinion on the fan setup Sir. I was at a local shop yesterday and I had in my cart enough fans to do this exact setup you have, however the tech told me I didn't need the single fan in the rear exhausting air and that it would create negative air pressure.

[@benknoxj6436]

Got my case coming today! This video will help me put it all together, Had a question about the radiator being an exhaust radiator though.. Is there not an issue with pushing hot air through the radiator as an exhaust or is this normal?

[@TheProvokedPrawn]

kzbin.info/www/bejne/p4LGqox-fNl0qNU

[@ucNguyen-tl1zs]

can you please give me more information about PSU regulator because i did not see any review about them and they did not list in PSU tier list as well. Thank u very much :D

[@flaccus123]

Would the Corsair RMX Shift work in this case. Concerned the 15mm of extra psu space at back of case might block the psu connecters. Thanks.

[@thivian]

Hello! Really liked the video! Can we see a build in the O11 Dynamic Mini or the O11 Air Mini? I really would like to see your way to do it!

[@TheProvokedPrawn]

kzbin.info/www/bejne/h4rHqqtjp6aFiZo

[@Espon123]

Hi, I connected the pwm cable from the controller to an NZXT Kraken elite fan connection. However NZXT Cam doesn't see/set the fan speed. I assume it's not possible with these fans?

[@qprof]

Great in-depth videos, The Provoked Prawn.... How is this compared to the Corsair 5000T you did a deep review last year, would you recommend this over the 5000T after your experience with Lian Li 011D Evo RGB or other case in comparison such as the NZXT H6 Flow you also review, as I am getting second thoughts (already picked up the 5000T case already with 6 AF120 Corsair fans and AIO cooler, extra RBB commander, Meg Ai1300P power supply, Ryzen7950x34, RTX 4090 but not yet started build)?

[@TheProvokedPrawn]

5000T is a great case. You should be happy with your purchase. I personally prefer Lian Li but only for looks (and possibly this has better airflow due to the bottom fans) but I certainly wouldn't say send your stuff back and buy other things.

[@notmenowhere]

@The Provoked Prawn this is super informative. Would you mind making a video showing how to us L-connect 3. In particular, to setup the fan for the CPU AIO

[@TheProvokedPrawn]

I probably should

[@notmenowhere]

@@TheProvokedPrawn additionally why not get a rog 4090 matrix and play with its installation. Lol

[@inmitch]

I too plan on building next month with this case, TL-LCD fans on a side mounted radiator and SL-INF fans everywhere else. I'm curious whether TL-LCD fans will pull enough air though a radiator and whether I'll have to run two Lian Li controllers, one SL and one TL. I may have to run the rad at the top, but apparently that is louder and not as efficient as a side mounted radiator.

[@TheProvokedPrawn]

Yeah unfortunately I don't know whether they will. I'm not sure I'd trust it

[@markhalstead2386]

Have you tested cooling with the GPU vertical vs horizontal?

[@marv8686]

Will the lcd fans be a possibility if one is thinking of a 4080 super i wonder.

[@paarinshah2924]

if my motherboard doesn't have 3 pin argb 5v connecter, will the RGB not work for the fans/case

[@jonathonbaker4039]

Is it possible to sync all fans(control hub),case rgb and Lian li strimer if your motherboard has 2 5v argb header.

[@KevinNguyen-zx2px]

So if I'm NOT using an AIO, and my CPU heatsink uses 2 fans - would it be right to buy 12 of those Lian Li fans that fit together (UNI fans)? or 9 and 3 different ones for the heatsink and back exhaust

[@mfarisace]

Hello @TheProvokedPrawn.I have motherboard b650m mortar wifi ddr5 and psu seasonic gx1000.As for setup the lian li tl lcd,is it compatible or not? I want setup 7 fans in my corsair 5000D airflow case.

[@jhabarretto9697]

Awesome build, Just 1 question, The Rear fan is a TL 120mm Standard orientation correct ? Thank you

[@TheProvokedPrawn]

Yes it's not reverse blade if that's what you mean

[@jhabarretto9697]

@@TheProvokedPrawnMany thanks

[@thesagaofblitz]

Would that power supply work for the white asus 4090 oc? Or should I buy a different one? Love your videos BTW. I have the Lian Li rgb case too. Bought it from your videos.

[@TheProvokedPrawn]

Yes it would

[@superior_nobody07]

how would this compare to something like the h9 flow or h9 elite

[@Th3_Dark_Side]

I have the same case but for a strange reason I cannot fit my graphics card in with the anti sag bracket installed. It will not klick correctly into the slot which means the clip is not closing. Without the bracket it's all fine. I even double checkt if the standoffs for the motherboard are all exactly in the middle of the holes. Maybe you know what's wrong here?

[@minji_]

Hey, I'm going to be following this build guide once the case releases here in Australia. Is it possible for me to use the Corsair iCUE H150i ELITE LCD XT and replace its stock fans with lian li's uni fans? If possible, how would I go about doing that? Thanks!

[@TheProvokedPrawn]

kzbin.info/www/bejne/rGbOdYmQosqDj7M

[@AviFN.]

i am using the same mobo and case as you but on pcpartpicker it says that I need a A USB 3.2 Gen 2 to USB 3.2 Gen 1 header idk what to do with this

[@rkashsggeggr6285]

What if I have an older board from am4 that uses the old front panel connectors?

[@team0892]

Thank you for all of your videos! They were very helpful for me to get squared away with all the Lian Li products considering how many they have and all their little tidbits. Quick question about the O11 Evo RGB case. How do you control and customize the RGB lighting on it? I've cycled through all the buttons on the case, but it's not showing up in L-Connect 3. Any tips are much appreciated! TIA!!!

[@TheProvokedPrawn]

You either have to use the button on the case or connect the RGB cable to your motherboard (as I showed) and use your motherboard lighting software (e.g. MSI Mystic Light or Asus Aura Sync) to control the lighting. It won't appear in L Connect.

[@team0892]

@@TheProvokedPrawn TY for your quick reply and pointing me in the right direction. I do see my motherboard and case LED strip in the Sync Devices tab when attempting customize the lighting in Aura Sync. Both are checked and when making changes in the Aura Effects tab, for some reason only the motherboard lighting is impacted and the case lights remain the same. I'll try to keep fiddling with it or perhaps there's a tutorial online somewhere. Many thanks!

[@team0892]

@@TheProvokedPrawn For some reason my motherboard would only sync with the predefined color patterns in Armoury Crate, but it wouldn't sync with my own customized pattern. I finally resolved this issue. I had to reinstall Armoury Crate & Aura Sync to get the motherboard properly working with the software. Once reinstalled, I created a new custom color pattern and applied it to the motherboard and case. However, only the motherboard worked, but not the case. It turns out I had to press and hold the M button the case for 3 seconds to activate Pure Color Mode to make it sync with my customization in Aura Sync. I hope this helps anyone reading through the comments that has a similar issue!

[@TheProvokedPrawn]

@@team0892 thanks for sharing

[@BBDINC1]

What are your thoughts on replacing the radiator fans with 3 140mm. I want to mount the radiator on the side with 3 reverse blade 140mm lcd fans.

[@TheProvokedPrawn]

You couldn't, they would be too big

[@justpat69]

Quick question do you see a drastic change in temps depending on where you mount the ssd's? For example like behind the mother board compared to the fan slot? Im interested in buying this case but i usually run a lot of storage in my pc and this has been on my mind ever since.

[@TheProvokedPrawn]

I've not tested that so I can't say I'm sorry

[@AceDotBoogie]

Right in time, all my parts just arrived 🫡

[@TheProvokedPrawn]

Nice. Enjoy!

[@Planehazza]

Wish I could find these fans in stock! Any ideas when Lian Li will ship them to UK??

[@TheProvokedPrawn]

They should be available from Overclockers

[@presscovfefe]

If I wanted to do this same case, fan setup, and aio setup, but adding the Lian Li Strimer cables (one 24 pin, and one dual 8 pin) how might you go about doing that if there aren't enough USB headers on the particular motherboard?

[@halacron1]

On my motherboard, ASUS Rog Strix X670E-E, the manual says it supports 6x USB 2.0 ports on the headers. I'm not sure if that means a total 6 or 6 per header. So solution is simple, buy a 4 port internal USB 2.0 hub.

[@TjTjTEADGE]

Which item does the fan controller come with? Also ur so underrated. I dropped a sub!!!

[@TheProvokedPrawn]

Triple pack fans

[@TjTjTEADGE]

@@TheProvokedPrawn thanks

[@TjTjTEADGE]

@@TheProvokedPrawn what’s the mobo?

[@Knowledge021]

Hi I had thought the AIO already came with thermal paste on it? So do you recommend still adding thermal paste? Would two layers of thermal paste be better?

[@TheProvokedPrawn]

It has thermal paste. I've already used this one and needed to reapply fresh

[@Eden-vm8sb]

Hello, does the fan controller come with the case, the fan pack or do i need to buy the fan controller seperately? apologies if this was mentioned in the video and i missed it. Also do i need seperate controller for TL120 uni fans (not lcd) and SL120 uni fans?

[@TheProvokedPrawn]

With the triple pack and yes, you need different controller for different fans. See here - kzbin.info/www/bejne/naenh5ygi5mkrLc

[@CYONX-BUILT]

No Rotten Tomatoes. 2 Thumbs 👍👍 up. 👌

[@leagueaddict8357]

I made a new build, in the NZXT H9 flow, I plugged most fans into a corsair rgb hub, think commander pro? but, the other 2 fans that I plugged into the mobo aren't giving RGB so I ordered the commander core XT which is different from the regular commander core, but if I plug the 2 fans into that and just use SATA that should work for the RGB right?

[@TheProvokedPrawn]

If you have Corsair fans this should help kzbin.info/www/bejne/oKe7dJWkrpKGq9k

[@user-hl7lx8ds7t]

NICE

[@TheProvokedPrawn]

Thanks

[@thesagaofblitz]

Do you happen to know if the controller for the LCD fans is also capable of controlling the sl120 V2 fans

[@TheProvokedPrawn]

You need a different controller for each

[@scpmusic1225]

Are the fans at 26:33 the reversed or normal version? Thank you so much for this detailed video!

[@TheProvokedPrawn]

Those are the reverse blade ones

[@scpmusic1225]

@@TheProvokedPrawn Thanks! Just to make sure, reverse blades are for air intake and the normal ones for outtake?

[@Mark__A]

Nice build but I managed to do a much better cable management in the same case.

[@TheProvokedPrawn]

good for you, I wasn't trying

[@kamerontranter1169]

My aio lights up and mobo and my GPU and my ram and 24 pin strimmer on but rest of my fans 6 LCD are not running what so ever and I've got no display either not sure what's gone wrong

[@luisdi3462]

dude thank you for all the content about the case, you are covering it all, I really want to get this one but I need some info maybe you could help me with. I'll leave my question here: 1- I need to know the dimensions of the box itself, the cardboard box of the product, where it ships, everybody who I've asked just give me the case dimensions...😅 2- I want to know if the bracket to mount a 420mm AIO on top is included or is bought separately 3- with the bracket, can you fit 3 140mm fans on all 3 sides (top, bottom and top)? thank you very much before hand ❤

[@luisdi3462]

please 😅

[@TheProvokedPrawn]

22x24x15 inches

[@JoliHomes]

Hello thank you for the video. Reference to the TL LCD fans will not be compatible with the Infinity controller. Would you have any links to that? I ordered 4 TL LCD Reverse fans as triple packs are hard to find, therefore I dont have the controller for this model. Looking forward to hear from you. Thankyou

[@TheProvokedPrawn]

I asked Lian Li directly about it. You can try but I haven't. So I can't speak from personal experience but obviously the TL fans are more complex than the Infinity fans so the controller technology may be different

[@sibzy1]

I had the exact same issue today on mine, couldn't get hold of a triple pack for reverse blade so purchased them individually. The issue being, you can't get the specific LCD controller separately which is a major oversight from Lian Li. I returned my individual reverse bladed LCD fans and went for an exhaust triple pack instead to get the controller. Not what I wanted in terms of air flow, but my pc has been out of action for 2 weeks now and I'm clucking to game 😂

[@bLam911]

hey mate was wondering if you know the difference between the lianli fans, SL vs TL ? i looked all over reddit and google someone pointed to your videos. but no one can really give me a straight answer.

[@TheProvokedPrawn]

TL are the newest fans in a few different varieties including LCD. Better performance I believe and a different style from the SL fans kzbin.info/www/bejne/nH2Xpoyjf9uhsMU

[@milanhron6765]

I have a similar setup, but I don't know how to connect the cables. Anybody got any ideas? O11D EVO RGB + GA II TRINITY with UNI FAN SL-INF + UNI FAN TL LCD Total: 4x 5V ARGB and 3x USB MOBO : 3x 5V ARGB and 2x USB -> Will be hubs working ?

[@sibzy1]

Im building this EXACT set up right now on my 011 vision. Slight issue with the LCD controllers though. Word of advice - make sure you buy the triple pack both reverse blade or exhaust as you MUST have the controller, the AIO controller, strimer controller, or normal INF controller will not cut it. Found this out the hard way.

[@TheProvokedPrawn]

Yeah sadly they aren't universal

[@sibzy1]

​@TheProvokedPrawn if you are anywhere near the south of England (Bournemouth), please help me build this 😂 it's stressing me out

[@TheProvokedPrawn]

@@sibzy1 Essex bruv

[@sibzy1]

​@@TheProvokedPrawn bit of a treck 😂 your vids are great though, very informative 👍🏻 As a side note, I have seen a few builds lately that have incorporated a small rectangular LCD screen, would love to see you do something on this, like a how to.

[@MasterAssasin1000]

In my case (this one in black), the lights turn on, but I cannot control them through software (SignalRGB), they simply do not appear detected anywhere, I have already tried creating custom devices and nothing, can someone guide me as to what I could have done wrong?

[@allenaraujo4473]

I need an update on this....I recently saw another video apparently u cant connect the LCD and other fans to the same controller...you need to use the controllers that come with the fans...

[@TheProvokedPrawn]

You can connect the to the same controller. As long as it's. TL controller

[@dimensionpug1419]

Just wandering if the way you've put ur fans is right i might be mistaken but arent they all intake?

[@TheProvokedPrawn]

Bottom and side are reverse blade intake fans. Top and rear are exhaust

[@ROB-ew6wg]

If I got the o11 vision and had a Nzxt kraken 360, would I be able to use that on the back but replace the fans as Lian li tl lcd fans? Goal is to have 3 lcd fans in the back while having kraken lcd on cpu. But I have no idea if this is possible with wiring and controllers compatibility?

[@TheProvokedPrawn]

Yeah. Just do what I did. Remember the port you connected the rad fans too and then set them up in l connect to respond to CPU temp. Connect the kraken pump to AIO Pump or CPU fan and just leave the fan connectors empty. Use the sata power for the pump though

[@ROB-ew6wg]

@@TheProvokedPrawn thank you kind sir! I haven’t started building yet but about to press the button on buying the items. In your opinion, the o11 vision or the evo rgb?

[@TheProvokedPrawn]

@@ROB-ew6wg Evo RGB. Better airflow.

[@ROB-ew6wg]

@@TheProvokedPrawn thank you again! That sealed the deal. Cheers from America!

[@JoseFlores-ks9me]

Is there other psu that I could use that’s basically the same they don’t have the one you used in the U.S

[@TheProvokedPrawn]

Sure. Most ATX PSUs should fit. kzbin.info/www/bejne/mn_WlomuptaUqJI

[@oTheDucky89o]

Hi, this is my first time building my own rig.. Do you know if it's okay to guild a rig in top of a marble or ceramic table?

[@TheProvokedPrawn]

Sure. If you're careful www.wikihow.com/Ground-Yourself-to-Avoid-Destroying-a-Computer-with-Electrostatic-Discharge

[@tycoonmaster0909]

Does anyone know if lian li has intentions of releasing reverse 140mm infinity fans? I’d love to put them is this case…

[@TheProvokedPrawn]

I believe it's in the works. Last I heard it was "early" 2024. But not sure when.

[@MeborHud]

Hello! Please make a video where I have an Nzxt h9 flow case and nzxt kraken elite 360 aio. With 10 x f120 rgb dou fans, one MSI core Z790 tomahawk wifi ddr5 motherboard. How to connect them beautifully? I'm building one now and I'd like to know in detail how it's possible. Thank you very much if you make a video about it.

[@TheProvokedPrawn]

That's very specific

[@MeborHud]

@@TheProvokedPrawn Yes. Components of the complete list: NZXT H9 flow case MSI mag Z790 tomahawk wifi ddr5 Intel I9 14900KF MSI Meg Ai1300P power supply MSI RTX 4090 gaming x trio NZXT vertical holder NZXT kraken elite 360 aio Corsair vengeance 2X16GB ddr5 6400mhz Samsung 890 pro m.2, 2tb ssd Samsung 870, 2.5 ssd Intel m.2, 500g ssd 10 piece NZXT f120 rgb dou fans MSI Optix (mpg321urde-qd) 1 Piece NZXT internal USB hub 2 piece NZXT RGB & fan controller The first computer I ever put together. It would be nice to have a video as detailed as the one you always make. The parts are not cheap, but I would like to test myself and see if I can do it. 🙂

[@MeborHud]

@@TheProvokedPrawn In the motherboard box, there is a usb prendriver. I don't even know what it's for, I couldn't find a description of it anywhere. I don't even know exactly how to set up this PC. I am very new to this field.

[@lethalno1]

Can I change out the aio fan cable for a single cable?

[@TheProvokedPrawn]

I'm not sure I get what you mean

[@freazyknight]

My tl lcd have strange problem. After a while, the animation i put disappear lian li picture appear. It does not happen to all fans together but 1 at a time sometime 2 at a time. Is this due to me running signalRgb with L-connect

[@TheProvokedPrawn]

Very strange. Have you checked for firmware updates

[@milenkrumov6579]

Hello everyone.. I started building a computer but ran into a problem, if you can call it that... I have a Lian Li O11 Dynamic EVO RGB CASE and Lian Li UNI FAN SL-INF 140mm I have a technical question regarding the installation of 3 X 140mm fans which are on the front, i.e. to the right of the motherboard...I can't screw more than 8 screws there because the upright bracket is a bit short. ..On the first and last fan, the upper screws, which are 2 each, have nowhere to screw....The fans I watched a video in which 3 fans of 120 mm fit perfectly and all 12 screws are screwed to them... But for 3 fans of 140 mm something is not right... Does anyone know where I'm going wrong?

[@justatim8143]

I like the anti sag bracket but not the color as a all white case should have all white components.

[@murilovieira09]

O que eu não entendo, é que posição dos fans inferiores e superiores são as mesmas, então como o superior está como exaustão, se estão na mesma posição dos inferiores ?

[@TheProvokedPrawn]

The bottom ones are reverse blade

[@murilovieira09]

@@TheProvokedPrawn Now I understand, that's why I was confusing, thank you very much, good job

[@GanJosie]

I hope lian li will release evo xl rgb. I have both xl and original evo, but xl much better.😅

[@adrewdh98]

Bro said screw the cable management and slammed the back pannel LOL

[@sizzly_xd5698]

Can someone write to me here which fans were intake and outtake wanna keep it for when this case comes to Sweden

[@TheProvokedPrawn]

Bottom and side are intake (reverse blade), top and rear are exhaust

[@sizzly_xd5698]

@@TheProvokedPrawn thank you just ordered the case and gonna be here in a week :)

[@TheProvokedPrawn]

@@sizzly_xd5698 enjoy

[@robinenbernhard]

wish fans where 120x120 and not 120x124. it wil not fit in some case als rear fan like my NZXT H9

[@jorgemejia7179]

Hey how’s it going ? My lcd fans are not lighting up ?

[@TheProvokedPrawn]

kzbin.info/www/bejne/naenh5ygi5mkrLc Are you using port 1 for them? If so, try a different one

[@jorgemejia7179]

@@TheProvokedPrawn I’m using port 2 . But I haven’t download the l connect 3 app yet

[@Defiansy]

do the lcd fans needs to be reverse blade ?

[@TheProvokedPrawn]

Depends where you're mounting them

[@Defiansy]

@@TheProvokedPrawn same as yours

[@rsmart84]

best case right now ?

[@TheProvokedPrawn]

It's a good one though I prefer the Evo XL personally

[@smugbiz]

I like the QOL improvements on this case but I hate how empty this case looks. i think i’ll be staying with my evo. 140mm fans are not a solution, this case look goofy as they don’t even properly fit the side mount. another deal breaker for me are those hideous cable grommets, they’re grey and just too big for no reason. imho i’d rather take the OG Evo with its support bar over the RGB

[@H4rmz_.]

What size are the fans??

[@TheProvokedPrawn]

120mm

[@Bumpyfn250]

W

[@Manzo98_]

Dude u have a problem with all the TL LCD screens not sinking? Some work, but a couple fans ain’t sinking making it show it’s not plugged in

[@TheProvokedPrawn]

Apparently if you use port 1 that can be a problem