Corsair QL120 VS LL120: What's the difference between these RGB fans?

[@TheProvokedPrawn]

Related videos: How to wire and connect Corsair RGB fans kzbin.info/www/bejne/oKe7dJWkrpKGq9k Avoid these problems with your all in one CPU cooler kzbin.info/www/bejne/pIfOf2uanqd8d6c Common Mistakes You Might be Making with Your PC Fan Setup! kzbin.info/www/bejne/q4GsfqlpZbumadk Can I use different fans with my all in one cooler? kzbin.info/www/bejne/g56bZqSDer6feqs See QL120 triple fan deals (note these are affiliate links that earn me a commission at no extra cost to you, other retailers are available):: Corsair - go.corsair.com/eKrkZD Amazon US - amzn.to/2ZSW2hc NewEgg - newegg.io/nc906f11a1 Amazon UK - amzn.to/2SZ2hyr Amazon CA - amzn.to/39JEhWj Amazon DE - amzn.to/2MYJAax Amazon FR - amzn.to/35n7DpW Amazon IT - amzn.to/2QszNM0

[@13ane]

Thanks for the details and close ups - really helps when looking to do a build to see this stuff up close and look at how they connect etc.

[@TheProvokedPrawn]

No problems. Glad to be of help. Hope you've seen the other video where I showed how to connect them in more depth.

[@faahaad0]

I love how the first timestamp is "Hello"

[@TheProvokedPrawn]

Yes I have someone helping me out with them and he thought it was funny and I did too.

[@offendershuffle9386]

*Hellooo

[@ElijahMorganChannel]

Hello

[@LEXXIUS]

Thank you for the detailed review! These QL fans even look great from behind with the black cross!

[@sovereign1160]

Excellent review. I used this when deciding what case fans to get for my build, and I'm so glad I went with the QLs over the LLs.

[@TheProvokedPrawn]

Glad to be useful!

[@ousgoo7076]

Yeah I’m gonna put these in since I’m doing a build with the o11 with custom water cooling so I can still see the rgb than if I went with the ll120s

[@pikviini2827]

Can you tell me the biggest difference or the main thing bc I don't know which one to choose

[@ousgoo7076]

@@pikviini2827 the ql fans have an rgb ring on both sides meaning that no matter what the rgb is showing

[@pikviini2827]

@@ousgoo7076 So basically better rgb and the fan guality I's the same or is it even better

[@MrThock]

I was looking for a good comparison of these fans, well done!

[@TheProvokedPrawn]

Thanks. Glad you approve. Hope you enjoyed enough to subscribe.

[@kinggremlin4574]

If you are picking between the white versions of these fans there is another major difference that wasn't mentioned here. Unlike the black versions which all top out at 1500RPMs, the white LL120's top out at 2200RPM's, while the white QL120's top out at the standard 1500RPM. At 2200RPM's, the white LL's will push 63 cubic ft/min which is more than 50% more than the QL's at 1500RPM. One of my LL's is starting to rattle a bit and I came across the RPM difference when trying to decide whether to switch everything to QL's or just replace the LL. Definitely going to stick with the LL's even though I think the QL's look better.

[@toasted3259]

Appreciate it man. I was about to make a mistake and go with LL fans but your video saved me to go with QL since I’m doing water cooling in O11d xl. Thanks again

[@Slimmeyy]

This is a better idea than making fans specifically to reverse the airflow direction, impressive. They might be bloody expensive, but I'm very tempted to get quite a few of these just because the rear looks good too xD

[@fmpmuld1]

First video where we can clearly see the back of the fans ! It is a good message to other testers because they are all focused on the light without describing the product itself. This one is the best review ever because it really help to choose. Thank you mate !

[@TheProvokedPrawn]

Thanks for watching and for appreciating! Hope you enjoyed enough to sub.

[@fmpmuld1]

@@TheProvokedPrawn I did of course :) and additionally, I'm watching other videos to build my case! great great great reviews ! Keep going mate!

[@fmpmuld1]

I'm dying waiting some AIO WC reviews. What would be your choice if you would have to go for WC only for silence ? I don't really care about last degre I can grab because I do not overclock my systems and I can let my CPU temp going higher than ''normal''. I want something really nice and price is ''not'' a problem (If you see what I mean)

[@TheProvokedPrawn]

kzbin.info/www/bejne/aZPdhHWBnLqantU

[@grzegorzzielinski6574]

Hi. I would set top fans from cpu cooling into opposite direction. That way heat from radiators are blown away out of the case

[@Maladriel]

That´s what I need for optimal airflow. And it also looks great. Thanks for the review.

[@TheProvokedPrawn]

Thank you for watching. Hope you enjoyed enough to subscribe 🦐

[@DTWAIRSOFT]

0:00 Hellooo 0:10 The fans 0:38 Improved RGB 1:03 Corsair LL120 working in the case 2:05 Technical specifications 3:03 Corsair QL120 LEDs 3:58 Set up 4:43 Corsair QL120 in action 5:27 Corsair QL120 customisation 6:08 The price

[@Sovereign01]

I'm just amazed how perfectly clean the inside of your machine is, there's not a single speck of dust anywhere.

[@setiop6788]

I returned all my nzxt overpriced crap and bought another overpriced corsair ql120mm fans except these weren't crap but very happy with my purchase. Worth every penny.

[@TheProvokedPrawn]

Ha

[@lucaparodo8643]

If they worth every penny then they aren't overpriced😂

[@devantetoppin7879]

@@lucaparodo8643 Oh they are overpriced. For what it costs to make vs what they charge. Well their profit margins have to be huge quite frankly. That said it's the type of thing you can do and get away with one you have the best product on the market hands down. Only thing better would be some Noctua's but then you'd get no RGB. Corsairs giving some of the best fans / performance along with the best RGB support bar none.

[@lucaparodo8643]

@@devantetoppin7879 yes I know but if you say that they worth every penny then you can't say that they are over priced.

[@devantetoppin7879]

@@lucaparodo8643 Worth every penny are your words not mine. I said overpriced and then are. Are they good? sure. Are some people willing to pay the crazy high price? sure but that doesn't mean it's not over priced. A honda civic is a great car usually the best in it's it's market segment these days but they would be overpriced if they cost 100k. Some fanatics would pay that but it would not be worth 100k.

[@xii-nyth4101]

always liked the hd120 and thought the qls look weird, but seeing them "in person" next to the ll120 and not in a product photo just makes them look like a future version, and when I saw how they look with the middle leds shut off I was sold

[@BarraGutheWorld]

Omg Thankyou I just ordered 10 ll120 fans and noticed that the ql fans are better, luckily I didn’t get charged yet

[@Jayxe]

I cannot bend my mind around the fact that you had exhaust going down and out the back rather than up and out the back. Literally sucking air away from that GPU instead of feeding it cold air.

[@damonsteinhauser8104]

plus didn't he have intake going through the radiator, so its sucking air through the radiator but then pushing that hot air right into the case

[@Gloomshimmer]

But he has max RGB, thats what count. Negates all temperature Problems when your pc look like a lamp to avoid planes. Go on a convention and look what awful builds Thermaltake and others do.......Steve Burke has nice videos on GN.

[@damonsteinhauser8104]

@@Gloomshimmer i guess you’re right, the more rgb the more fps you get also!!!

[@NotHimJim]

He seems clueless on how airflow works

[@tw4879]

I have the same case, also put the LL120s in it and now I want to update to the QL120s, this video helped me make the decision since I could see exactly what it will look like, though I went for white instead of black.

[@mrkiwi7047]

Have you considered the Lian Li unifan sl120? They are daisy chainable, and have great rgb software.

[@svl6_waynepp445]

Great review! Thanks i didnt need to go to another video in search answered all questions in this video. NOW time to return my LLs and swap to QLs

[@TheProvokedPrawn]

Glad I could help! Hope you enjoyed enough to sub.

[@svl6_waynepp445]

@@TheProvokedPrawn i sure did sub, and ordered the QL off Amazon.

[@TheProvokedPrawn]

@@svl6_waynepp445 thank you sir

[@krylonpoet]

According the Corsair site the LLs have a max speed of 2200 and static pressure nearly twice that of the QLs. I’m considering the LLs for this reason, even though the QLs are a lot prettier. It’s a tough decision.

[@joule9255]

would love these... if they didn't have the classic corsair price like 120$ for 3 fans. You could buy a high-quality case for that. But great review!

[@blackpanda7612]

Thanks for the video but just can't stop thinking of top fans for intake? Hot air rises so having the top fans for exhaust would get rid of the hot air much faster than pushing it down?

[@TheProvokedPrawn]

Whatever makes you happy.

[@isaiahfurrow7414]

I thought the same, and also not having the warmed air coming IN through the radiator.... I would think a radiator should ALWAYS be exhaust....

[@Jamespaintsplastic]

Hot air rises, but that rising force is actually very very weak. When you have fans moving the air around, hot air naturally rising is irrelevant. That rising current is totally overpowered by even a gentle breeze from a fan. Exhaust up or down.... the difference is so marginal....just have the fans however makes sense for your case. Hot air rising is only really relevant in an open space of free air. Edit.... Also having a radiator as intake/exhaust also makes a very marginal difference. Maybe 2 degrees to cpu/case. It's fine as an intake as long you you have a well ventilated case. The gpu produces waaaaaayyy more heat then a radiator. If you put your hand in the air comming off the radiator it barely feels warm. Then do the same around the gpu. So yes the rad could heat the case... but only if there is no exhaust/fresh air in the case. The warmer radiator air will just be exhausted straight out the case with very little impact at all

[@TheMitchBarron]

The new QL series are nice, but I think they took a step back in the design. The LL series look way better. Newer doesn't always mean better. Anyone else prefer the LL series?

[@uguresmeray]

great channel !! all new products and great camera with good angels and quality, you'll be 100k and more i hope. cheers mate .

[@TheProvokedPrawn]

Thank you sir. Appreciate the kind words.

[@The_KingDoge]

I love RGB. The amount of RGB I am now using may blind me in the long run but damn if they aren't beautiful. I was debating which fan to get an this review is the best comparison I found, thank you

[@TheProvokedPrawn]

Glad to be helpful. Hope you enjoyed enough to subscribe 🦐🦐

[@The_KingDoge]

@@TheProvokedPrawn already subbed! also what provoked you?

[@TheProvokedPrawn]

@@The_KingDoge people who didn't subscribe 🤣

[@KennyL89]

Why intake on the top? I never understand that. Heat goes up, why not have the top ones as exhaust?

[@chadmiller756]

Why can't we unlpug these once they are plugged into the node?

[@muny_man]

So overall, which would you recommend? Is the core much easier to set up than the pro?

[@TheProvokedPrawn]

I like the QLs a lot. You can see the setup process here - kzbin.info/www/bejne/oXSmYZuoprWcfKs which you might find useful. I wouldn't say it was easier. Depends very much on how many fans you have and such.

[@Airwolf2030]

does QL mean Quad LED and LL mean Large LED?, I'm trying to figure out what the letters stand for

[@TheProvokedPrawn]

No idea I'm afraid.

[@chunkylover5367]

QL is quad loop... I think. LL is light loop.

[@Airwolf2030]

CENTER311 okay and thanks

[@100MilWill]

Wouldnt it of been better to intake at the bottom and exhaust out the top with the final config you showed at 5:05 with the QL fans because heat rises? So all the heat is rising and those top fans are blowing that hot air back into the case? I could be wrong and im sure there is alot of different opinions on this but am curious why you did it the way you did is all. Im totally new to PC building so I am trying to learn. Thanks for the video!

[@TheProvokedPrawn]

Yes yes yes yes yes

[@Rusty511]

So giving up a better sound/cooling performance for slightly better aesthetics and lighting? I don't know :/ I think I would have stayed with the LL120's

[@shompster]

I agree as far as "upgrading", but for a new build I'd go QL 10 out of 10 times, they're better looking while be more flexible and the temp and noise differences would be negligible.

[@isaiahfurrow7414]

I'm curious, wouldn't he be better off with bottom and front intake, amd the rear amd top exhaust.... it makes no sense to me to have a intake be the radiator as that sucks the heat INTO the case.... wouldn't a radiator always be better as exhaust?

[@flatandmotionless4608]

I just bought that case and I’m stuck on what fans should I get I really like the white ll120 but the ql120 look awesome hopefully they come out with white ql”s

[@tmkm_]

there are now some in sale

[@lc2723]

yeah if its not too late, there are white ql fans available

[@micahroberts3564]

Just buy these and set to solid white.

[@robertthompson0]

late reply but hope you got the white fans. I just did an all white build for my daughter with the white QL's and they look amazing.

[@MickTut]

Why would you set the top AIO to intake?? Never heard anyone recommend anything but the opposite of this.

[@TheProvokedPrawn]

I'm a mad man

[@djangojansen7648]

@@TheProvokedPrawn Me2

[@rino0oo]

5:20 u got problem with DDR lighting its buggy (left side is flickering) got the same problem sometimes. its because of the voltage in most of the cases.

[@ben_braaf]

I just orderd nine of these QL ones. Only in the front I don't think I can manage to get these in because it's a very huge case

[@allbymyself85]

why the top fans should be intake? so the bring take the heat from the radiator inside the case ? I believe you were talking about the front fans

[@TheProvokedPrawn]

They don't have to be. I'm just mad.

[@allbymyself85]

@@TheProvokedPrawn 😀

[@dominiquecamus8488]

Very nice setup, sincerely! I've choosen 6x ML120 (to limit fans noises) but they've only 4 RGB LEDs each, unfortunately. Thumb up, new suscriber. Thanks for this excellent review.

[@TheProvokedPrawn]

ML are meant to be great! Better performance so you should have no regrets. :)

[@dominiquecamus8488]

@@TheProvokedPrawn Okay, thank you very much for your reply and this advice. Greetings from France.

[@TheProvokedPrawn]

@@dominiquecamus8488 no problems! :)

[@Aquamaui.mp4]

Hi i have a question. If i want to setup 9 of the QL120 Fans what do i need? 3 times the 3 Fans Set and a Commander Pro? Thanks for help!

[@TheProvokedPrawn]

In a perfect world, three triple packs, three lighting node pros, two commander pros and enough USB headers on your motherboard to cope. Though you can do it with system fan headers on your motherboard too. (So just one commander pro)

[@Aquamaui.mp4]

@@TheProvokedPrawn Oh holy that sounds like spanish to me, im pretty new to this stuff but thank you so much! I will tryna figure out how to do this then with your answer :D

[@TheProvokedPrawn]

@@Aquamaui.mp4 this might help kzbin.info/www/bejne/oXSmYZuoprWcfKs

[@Aquamaui.mp4]

@@TheProvokedPrawn thank you!

[@christianl2024]

Just bought the ll and now swing this video great

[@ChrisVog]

So can you light the fan blades a different color than the outer ring?

[@JoeyRhubarb]

Can I use an LL140 as the fan on a CPU heatsink? No fancy watercooling here. Was just wondering if it would work. It would be in tandem with 2 other LL140s working as case fans, or will I run into difficulty by not having an independent fan that can be regulated on its own? I've got Noctuas lying about but this would be solely from a looks POV!

[@hellomoto6300]

JB H it’s should I know I am late but I hope this helps

[@hunterzolomon5127]

Awesome video, just have a few questions. On the LL fans, is the lighting on the intake side or the exhaust side? Also does it make sense to use LL on the top of my case and QL on the front since my top doesn't have any glass (making the QL kinda pointless on the top)? Is it possible to change just the fan of a cpu water cooler e.g. swapping out the corsair hydro 100x fans for rgb fans? And finally can you adjust the lighting of the fans without a node e.g. just using the iCue or motherboard software?

[@TheProvokedPrawn]

Intake. Sure. See here kzbin.info/www/bejne/Y6fNlqqfjsuBqbM and no. You need the nodes.

[@CassidyHansen]

Wouldn't it normally make more sense to have the top fans acting as exhaust?? 1:18

[@isaiahfurrow7414]

I thought the same, you don't want INTAKE coming through a radiator in my line of thinking, you'd want that warmed up air to be exhaust.... I have never understood front mounted radiators that are intake... if the radiator isn't significantly warming up the air that goes through it, then it just seems like it isn't actually working as a heat sink... I think I am going to stay away from water cooling entirely for now, and stick with front/bottom intake, top/rear exhaust, and an Arctic Freezer eSports dual fan air cooler for the CPU, maybe put RGB fans on the cooler eventually.... but IF I were to do an AIO cooler, I would think top mounting the radiator as exhaust would be the ticket, and in a case like Corsair 5000 where you can have push amd pull fans exhausting through the radiator.... His fan setup is one of the only ones I have seen like this, but I have seen others with front mount radiators that are intake, amd that just seems like blowing the heat right back into the case....makes me wonder if the radiator actually does its job, or ....? Thoughts?

[@Jamespaintsplastic]

It honestly makes very little difference. As long as you have a well ventilated case with plenty of airflow and exhaust

[@CassidyHansen]

@@isaiahfurrow7414 @Isaiah Furrow Yeah it does seem odd sending that heat right back into the case. Technically an air cooler is doing the same thing if you think about it. As long as we efficiently remove heat from the chip(s) and somehow eventually get that heat out of the case, apparently it's probably fine. Also, if a radiator has intake air flowing over it, maybe this can be viewed as a good thing as the chip's cooling system will receive cooler air that wasn't already circulating in the case.

[@SachinBalan_PB]

Best review ever seen on yt. 👍💖

[@TheProvokedPrawn]

Blimey. Glad you think that. Hope you enjoyed enough to subscribe.

[@shanetrownson6139]

QL120 fans it is for me. Decided by your vid. Really, very helpful and appreaciated thank you!! I'm going to install these QL120 fans in an Corsair Obsidian 1000D case which should arrive in the next week. I've been looking for an Am4 socket motherboard for the AMD Ryzen 9 5950 with 8 ram slots. Apologies if off subject, though may I ask what mainboard / CPU you are running?

[@shanetrownson6139]

@@rewhiteconsulting After continued study, I agree fully. I now understand Im wanting a racehorse, not a work horse. I purchased the Republic of Gamers ROG Crosshair VIII Dark Hero and now have the AMD Ryzen 9 5950x in my cross hair. Appreciate your feedback. Thank you!

[@Nemesisx69x]

I have an msi motherboard with jcorsair header to control the rgb hub of my LL fans. So I dont have to use the LL microcontroller and the corsair software. Do the QL fans work with the old rgb hub of the LL fans or do I have to use the iCue software to light them up? I might just want to add one or two QL fans to my LL fans.

[@hellomoto6300]

neme I think it would work with the hub. You explaining was not that clear

[@battousaicrescent]

i'll wait till they go on sale, it was a fairly fun review, or just stick with the LL as they are vastly cheaper. If they do the 140s/120s with the magnetic bearings all the way up to 2.3k rpms, then I'll invest I think.

[@RobotsOnFire]

You gotta chill vibe yet I can still hear the enthusiast inside of ya throwin' a party 'cause of how f*ck sick your builds turned out. Pro-level content. Insta-Subbed.

[@TheProvokedPrawn]

Thanks for the nice comment. Appreciate it. And the sub too!

[@isaiahfurrow7414]

Thanks for the video, I really like the look of the QL fans and think we will get these instead of the LL fans, at least for some of them... BUT, I am trying to understand one part of your setup... would you not want to exhaust at the rear and top, and intake at the front ? I just can't wrap my head around having intake air sucked through a radiator, as that would be pulling in warmed air instead of expelling that heat... I would think that you want fresh intake air, amd the air through the radiators to be exhaust .... or am I just not understanding how this is set up and looking at the fans wrong in your setup?

[@TheProvokedPrawn]

You can do that if you want 😃

[@isaiahfurrow7414]

@@TheProvokedPrawn , watched again and still not 100% sure I am seeing it right.... is the air going IN through your radiator, or OUT?

[@tokoshiro5]

@@isaiahfurrow7414 I made the two ways here... radiator OUT made better idle temps, but gaming temps are higher 5oC (the GPU starts and it all go super hot). Radiator in, made idle a little higher yet gaming lower, maybe bc the airflow helps the gpu heat out yet still testing, and without all properly set (wainting for the gpu riser cable so I can manage it )

[@Djkoe]

Case I’m getting comes with LL. If I purchased a few QL to add to the pc would they be able to match or would they look different.

[@killerjj99]

Can you mix the ll120s and the ql120s or would this look out of place?

[@clover.9103]

Depends. If you set it to the same color not that much but the outshell is different so it will stick out

[@LEXXIUS]

Depends on how you plan to do it. Corsair states that you can't mix these on 1 controller, each controller must have only 1 fan type connected. I don't know, if the new controller Node Core supports the old LL fans but the old node Pro does not support QL fans.

[@judgement069]

im waiting on my QLs to come in ill let you know

[@judgement069]

Yes you can, I have 6 ll120s for my case. 2 of the push air through radiator, I bought 2 Ql 120s to pull air and look good from the rear. Perfect mix

[@mr.turcotte5892]

@@judgement069 Thanksfor the info, I just bought 3 ql120 to pull air into my rad and was wondering if they would look good with my 2 ll140.

[@trackmedixuk]

Why should top fans be intake. I thought they should be exhaust due to heat rising ?

[@TheProvokedPrawn]

Corsair recommends intake to cool the rad. The internet tells me I'm wrong whatever I do. You do you.

[@trackmedixuk]

@@TheProvokedPrawn I'm not saying your wrong man. Was a genuine question as I'm about to build a pc.

[@TheProvokedPrawn]

It really depends on the setup of the case and your personal opinion. For example, my case has three intake fans and I also exhaust the bottom. Yes, hot air rises, but there's no way to mount that radiator on my case unless to do what you're suggesting without mounting the rad on the bottom, which I didn't want. I've just switched to a new case, where I've got push/pull on the rad and exhaust on the top. I've actually mounted both intake and exhaust on this style of rad in the past and had no issues either way. Sorry If I seemed snappy, get fed up with people saying the same things sometimes. :)

[@trackmedixuk]

@@TheProvokedPrawn Thanks for the answer man and it's all good 😁

[@trackmedixuk]

Do you know anything about the new Corsair iCUE H115i RGB PRO XT. They say it uses the same ML fans as predecessor just without the rgb's. Isn't it meant to be an upgrade. If so do you know what has changed ?

[@ibsn87]

Biggest let down for me is ique. On a 9900k which is now a $900 CPU. I often catch ique pulling up to 5% cpu usage. It always prevents shutdown with errors, and often doesn’t find my h100i platinum the OSD doesn’t work and it’s just the most clunky, resource heavy program for something that should be tidy and sleek...

[@LonestarsSupra]

Nice review. Good info. Just very suspect on the fan setup (witch I know has no bearing on the actual review, witch I thought was good). You would do better to reverse your intake and exhaust fans.

[@TheProvokedPrawn]

This is my new setup if it helps put you at ease. kzbin.info/www/bejne/bIDIqZ6haLGma68

[@joevessecchia2741]

Did you notice a rise in temperature for your cpu aio when you changed to qls or is it the same?

[@TheProvokedPrawn]

I have not noticed a rise no.

[@JohnCarlyle]

Not QL120 specific. But going from having my top mounted AIO CPU cooler with fans set to exhaust and changing them to inlet, I saw CPU and radiator liquid temps drop by 5C. However, my GPU temp went up by 6C and my RAM up by 3C.

[@Le_Mon9]

Can you combine an LL with QL in the lightning node?

[@TheProvokedPrawn]

Possibly, but you'd need the newer node pro

[@Le_Mon9]

@@TheProvokedPrawn I'm using the h100i rgb platinum se right now. Planning to get the ql140 and 1 ql120 as case fans. Correct me if I'm wrong but the 2-pack ql140 already includes the new node pro, right?

[@kalerax]

Is the main difference backside of the fan? but does the frontside look same ?

[@otienoobunga2454]

Very very informative review. Thank you.

[@TheProvokedPrawn]

Thanks for watching. Hope you enjoyed enough to subscribe

[@otienoobunga2454]

Indeed I did.

[@TheProvokedPrawn]

@@otienoobunga2454 hero

[@dobbydobbster8374]

Am I right when I see the description in the pinned comment is incorrect? On all seller websites it states that the QL's RPM is a max of 1500 which is correct however the LL's is a max of 2200

[@runitbackgaming503]

Legitimate question… Don’t you want your top fans and back fans to be exhausted? And your front and bottom fans be intake? Since heat rises, wouldn’t you want the cold air coming from the bottom and exhausting to the top?

[@TheProvokedPrawn]

Sure

[@runitbackgaming503]

@@TheProvokedPrawn I meant that as a legitimate question. It wasn’t to be an ass

[@ThaYetii]

Not sure if you sold your LL120 fans on eBay recently, but I recently bought some and immediately recognised the silver writing on the connectors in this video!

[@TheProvokedPrawn]

Nope they're all in the boxes still. Saving them for another build in future maybe.

[@Inpersona64]

If you don't mindd me asking, you noted that for the sake of utilizing the RGB, your LL top fans were mounted in exhaust when you wanted them mounted for intake. I see that most people would mount their front fans for intake and the rear and top would be exhaust. Why do you prefer your top fans for intake over exhaust?

[@TheProvokedPrawn]

Because I like doing things wrong. Plus the radiator was there and pulling warm air over it makes no sense for cooling but then hot air rises, so 🤷‍♂️🤔🙄

[@Lazereer]

can you dim the brightness of each fan?

[@alexkajko6462]

yes

[@Rspsand07]

God damn, nice, I wanna be at that point in my life where I can have 8 different ram sticks, 2 gpus, and 8 corsair fans in my case.

[@TheProvokedPrawn]

That's an NVMe drive not a GPU 🧐

[@alvizaman4340]

shouldn't the ql120s be flipped on top? they are set to bottom facing down, which is intake from the top.

[@TheProvokedPrawn]

Yes

[@NML1288-z9y]

did you use two commander pros or just one ? i keep reading that you can only connect 5 fans into one commander pro.

[@TheProvokedPrawn]

kzbin.info/www/bejne/oKe7dJWkrpKGq9k

[@_M-_-C_]

Buying a 3 pack of these later, at a whopping 101 pounds! They do look do sick though

[@destsy6639]

Thank you for reviewing May i please ask which fan is more quiet ? QL or LL ? Thank you and looking forward to your reply.

[@Godlage]

He tells you the answer in the video. The LL's

[@ps1hagrid522]

Hello there, does the LED hot spots on the qls bother you or are distracting in anyway?

[@andreaguirre6227]

You cant see them irl much

[@mrkiwi7047]

The LED hotspots are horrible on the ql's, and I returned mines because of it.Instead, the the Thermaltake quads have much more lighting, and diffuse the lighting with more LED's.Thermaltake's software is garbage however.

[@kidgrave]

Thanks for the awesome video. :) So what brand are your custom white cables and combs?

[@TheProvokedPrawn]

kzbin.info/www/bejne/h6m6Z6x8j8apiZo

[@kidgrave]

Thank you for the response. I took a look at your channel and you have many interesting videos. I’ll be checking out the video where you do computer mouse comparisons. Keep up the good work!

[@TheProvokedPrawn]

Glad you approve :) Thanks!

[@kidgrave]

@@TheProvokedPrawn you welcome :P I saw that the Corsair sleeved cables only come with a few grommets. Are the spare ones Corsair brand and where can I get some extra ones?

[@kidgrave]

I saw the link in your description but Amazon is sold out.

[@christophergalat8932]

I really appreciate the video. I have 6 QL120s plugged into a commander core instead of the node included. Is that why the QLs are super dim?

[@Bruce_Lee_22]

will the QL120's fit the same as LL120's as from the side they look thicker due to the protruding light loop? please let me know? my LL120's have finally given up LED wise and messing up, so need replacing so was maybe gonna get the QL120's instead, but need to know if they will fit in the case or not?

[@anotherv79]

So, as I see it on a 680x with horizontal 3080, you could set up the QLs as intake on the bottom to cool the gpu, a 280 Capellix on the top, as intake and the rear as exhaust which would hopefully give good cooling for both a 5900 and the 3080. I could also save on central heating costs. Any thoughts? I do enjoy your videos. At my age it is a joy to sidestep the baseball caps, tattoos and bumfluff. Well done and thank you.

[@A-AK]

Why should the top radiator fans be set to intake and not exhaust, I’m talking from a thermals pov not an aesthetics one. Is it better to have top rad fans set to intake even if they face the inside of the case?

[@A-AK]

I’m planning on getting a p500a case. I’ll keep it’s stock fans as front intake, and buy a 280mm rad for the top. Then I was planning on buying 3 corsair LL140s to change the ones on the rad and use the last as rear exhaust, ofc, I was planning on using my rad fans as exhaust since it will look better with the rgb rings, and it made sense to me to have equal intake and exhaust fans. But after this video I’m scared and rethinking things.

[@TheProvokedPrawn]

No, generally top is better as exhaust.

[@martinpalmer3575]

Newb question 2 - You mentioned the QL function differently to previous fans such as ML/LL......because the new QL come with the lighting hub? though looking online, the ML120 and LL120 triple packs both come with this lighting hub now too... Does that mean they all work the same....?

[@TZB77]

The QL 3pack comes with a Lighting Node Core, the LL's for instance with the older Lighting Node Pro. Difference is that with the QL fans you need to address much more LED's so you need the new 'Core' version, but in how they work it's basically all the same (just switched from LL's to QL's a week ago).

[@martinpalmer3575]

Nice I think im gonna swap mine too, I like that with the QL's you can have them set to intake or exhaust and not have to worry about seeing the rim lighting despite your config.

[@DONUTSKIE]

Sick setup!! I just noticed you have 8 pcs rgb ram sticks????

[@TheProvokedPrawn]

Yes kzbin.info/www/bejne/noncnp-ZgM1kmtE did this video then upgraded to 64GB as video editing is taxing

[@murdockwisc5044]

love the video. looking into getting those for new setup. i have a question i see you have two gpu. just wanted to see what its use for thanks

[@TheProvokedPrawn]

It's not two GPUs. One is an NVMe expander card.

[@murdockwisc5044]

@@TheProvokedPrawn oh ok thanks.

[@Emeralis]

I'm about to build a new pc and want 2 Corsair RGB fans (140mm) I also have the Corsair iCUE H115i RGB PRO XT. Does it matter if I have QL or SL fans to sync it up with the watercooler?

[@KileHooks]

i couldnt find if this was asked earlier, but which direction is the airflow for the QL120? front to back or back to front? thanks in advance

[@thepooner9417]

Questions why are the 2 top fans intake? My pc friend who knows alot always made the 2 top fans for me push air out the top of the pc rather than blowing air into the pc

[@TheProvokedPrawn]

Because I was a noob and made mistakes back then - kzbin.info/www/bejne/q4GsfqlpZbumadk

[@kaitran]

Why do you have what looks like a 1050ti under your main graphics card? Do you use one as a acceleration card or something like that?

[@TheProvokedPrawn]

It's an NVMe expander drive. Holds 4 m.2 NVMe drives. Very handy.

[@elracing21xD]

@@TheProvokedPrawn wtf I didn't even know that was a thing. Very useful!

[@elracing21xD]

Do you have a link to the one you have?

[@chrismcmillan3356]

quick question what fan is better for performance QL or LL?

[@TheProvokedPrawn]

LL

[@chrismcmillan3356]

@@TheProvokedPrawn thank you bro

[@chriskautz3245]

Shame that no one makes either a push or pull fan , that you don't have to "flip " over .. , Or just a fan and ring that just "pushes" onto the center bearing which ever config you require

[@martinpalmer3575]

Newb question! - If I purchase the Corsair H100i XT Pro RGB (comes with non RGB ML fans) Can I swap the fans out for two of these QL120s? If so, where would I plug their RGB connectors in....would I need the commander pro? / lighting node.

[@TheProvokedPrawn]

kzbin.info/www/bejne/Y6fNlqqfjsuBqbM

[@Jalex17895]

so the only difference is that the QLs have RGB lighting at the back as opposed to only at the front like the LLs and they perform worse than the LLs (and are more expensive) in terms of performance and noise levels

[@kobecaldwell961]

I really want the nzxt Kraken z73 and want to replace the radiator fans with 3 of these but I’m not sure if that would work. Do you have any idea if I could do that ?

[@TheProvokedPrawn]

kzbin.info/www/bejne/bIDIqZ6haLGma68

[@kobecaldwell961]

The Provoked Prawn thanks brother love ur content so far! Just subscribed keep up the fantastic tech videos!

[@TheProvokedPrawn]

@@kobecaldwell961 thanks!

[@bradbeyers9028]

What happens if you hook the old RGB fans up to one of those new RGB controllers do you gain any more customization control at all? my case came with the lighting hub and 3 of the older ones but when I bought a 4th exhaust fan its a new QL or whatever (I didn't even know there was a difference) and I just hooked it up to the same lighting hub to match the other ones.

[@edc.essential]

Can i run my LL with the QL just connect them to there own led nobe pro LL and the QL to the new hub it comes with???

[@TheProvokedPrawn]

Don't see why that wouldn't work.

[@Enyaron]

What is the case you are using in this video? Secondly for the Lighting node pro does it come with an adheavsive strip or is it heavy enough to sit somewhere inside the case?

[@TheProvokedPrawn]

Corsair Crystal 680x kzbin.info/www/bejne/oXSmYZuoprWcfKs Yes they come with sticky pads.

[@craighendry2692]

Looking at the 5000X (like my other post) Totally torn between the LL and QL's for it. Was thinking, 3 at the front, 3 exhaust with my 360 AIO at the top and one at the rear (i Know you didn't bother with the rear as you done push pull at the top. I'm more likely able to get a hold of LL fans, since the QLs are like gold dust. How are the colours in comparison, are the QLs any better than the LLs or are the QLs just the LLs but with lights at the back? Reason is that I might want to do a mix of LL and QLs. QL's at the front so the light comes back on to the motherboard and then the LLs at the top with the AIO as I don't need both sides lit up for the radiator. This make sense?

[@nikolasbabetas3490]

Great video!! Love from Greece 🇬🇷

[@TheProvokedPrawn]

Thanks! Glad you liked it. Hope you enjoyed enough to subscribe.

[@nikolasbabetas3490]

@@TheProvokedPrawn I subbed!

[@TheProvokedPrawn]

You're the best

[@makoulinos8]

Τα χαζεύω κ γω κ λέω να τα πάρω 🤣🤣

[@nikolasbabetas3490]

@@makoulinos8 Χαχα καλά θα κάνεις. Δεν έχω αγοράσει ακόμα καινούριους εγώ. Και οι MF120 Halo της CoolerMaster είναι ωραίοι. Αυτοί πάντως μεταξύ μας είναι και λγ ακριβούτσικοι αυτοί ιδίως οι ql που κάνουν όσο ένα cpu για να πάρω 6 που χρειάζομαι😂. Ευχαριστώ πάντως που μου θύμισες ότι πρέπει να αγοράσω fans😂

[@KlIIua]

0:00 Am I the only one who thought of "Hello, this is Stampy!" Ah back when he used to make those minigames and play with Lee, and Eli and Squaishy..

[@xspectre312x]

On corsair website LL120 have 3.0 mm-H2O and 63CFM and the QL120 have 1.55mm-H2O and 41.8CFM so the LL120 is more powerfull than the QL120.

[@TheProvokedPrawn]

Yes and ML/SP are superior to those too if airflow is your biggest concern.

[@sayantanbhattacharya7870]

Can I mix LL120 and QL120 fans? I've decided to replace my AIO fans with LL120 as top exhaust and one LL120 at rear as exhaust. If I use 6 QL120s as side and bottom intake, will it look good and can the colours be matched for LL and QL?

[@isaiahfurrow7414]

Please let me know what you came up with...

[@moustacheboy2350]

How is cooling? If i where to buy the Corsair iCUE H150i, and replace it with 3x 120 QL fans? Because static and rpm is a lot lower then the fans that it ships with, does it still cool okay?

[@TheProvokedPrawn]

I've done it and it still cools ok. Assuming you don't Overclock of course.

[@Mart538-]

Why do you put top fans on intake and bottom as exaust? Am i stupid or is this wrong?

[@TheProvokedPrawn]

I'm a madman

[@Mart538-]

@@TheProvokedPrawn i see. I tought i was going crazy listening to that 😆

[@trystanmarshall1867]

Will these fans work for an AIO water cooler

[@Waschlack]

Do the QL work with the normal lighting node pro and vice versa with the LL and the lighting node core?

[@TheProvokedPrawn]

No because the update node is designed to handle the larger number of lights in the QL fans.

[@Steiny5843]

i personally like the ll120s cause they dont wobble at full speed like the ql does.. the qls just feel cheaply made while the ll feels quality. ill take the 8 or so less rgb nodes for the quality of the ll120s

[@TheProvokedPrawn]

Hmmm. Not noticed wobble in mine

[@Steiny5843]

@@TheProvokedPrawn I watched a couple videos and the QL fans just wobbled really bad. It might be a defective fan but it was all 3 of them so idk