Handmade Insane Hubless Roller Skates

FlexiSpot E7 standing desk: bit.ly/3ryo6IM - US
bit.ly/3Q0o4U6 - Canada
What do you know about hubless roller skates? I've never seen anything like this before! So, behold - truly hubless skates that works almost flawless! All you need - roller skates, bearings, some metal and time :)
If you like this video don't forget to subscribe :)

[@TheQ_original]

Don't forget to check out FlexiSpot standing desk since they are extremely stable for daily use and use my code ''theQ50'' for $50 off on order over $500. desk link: bit.ly/3ryo6IM - US bit.ly/3Q0o4U6 - Canada

[@lakshmikumari.kandikatla1364]

I am first from india

[@MONSTRENERGY]

​@@lakshmikumari.kandikatla1364and?

[@jordanaponte3608]

You are the best, dude.😄👍😄👍😄👍

[@thisyoutubechannel6896]

make a bike that goes on train tracks

[@w777ru4]

Шляпа!

[@spicyice2255]

a answer to a question literally no one asked. I LOVE IT.

[@Animate-Anything]

the roll-resistance is greater than actual breaks. bravo.

[@rickyvaldez5205]

lmao

[@mr_cramberry]

Please make suspension skates

[@user-yw5sq9eb9g]

That’s would be 🔥🔥🔥

[@AsPhAlTjUnKiEde]

@@user-yw5sq9eb9g Not new >>> Powerslide Nordic VI Shockliner

[@Th3-Unkn0wn]

Your legs are the suspension

[@Xuebatt]

People who didn’t come from TikTok are allowed to like this comment

[@thezvoices8822]

Does he has tiktok?

[@Frankenstein_with_no_brain_]

U mean *came from.

[@theawesomer]

Awesome build as usual. You should paint them to look like TRON lightcycles now.

[@nicklauschristofonoXXII]

He already looks dumb enough ..

[@jantjestuc1]

you need a pink paar : ) homo !!!

[@lennartweber1502]

Exactly!

[@kapnk066]

Some will technically classify this as a hub design, due to the use of a continous circular tube acting as the thru axle, albeit large diameter. Brilliant presentation as always!

[@freescape08]

Just like almost every other "Hubless" design, it's simply a hollow hub, the only way around it is to have multiple points of contact that another could consider to be multiple hubs anyway.

[@BlindingSun_]

It is still a hub.

[@MAXProcess]

You need to put on more aggressive tyres To drive it in winter. And in case of bad weather, to drive it in fields and muddy roads It says 4x4 on it, so it should be able to go everywhere.

[@thetemplar2443]

Saw wheels

[@R_A_3000]

Skates with snow tires? Dude's legs are gonna be buff after the winter season.

[@10kurz1]

@@R_A_3000I mean, don’t skip leg day, and any day is leg day

[@RichEdwards]

The 4x4 logo with mud splash was a nice touch

[@InnerSunshine]

Love the creativity. I'm not convinced rolling along forest doesn't risk getting dirt inside the bearings :)

[@bazilwreckerloughead]

Love the look; with the 4x4 on them!

[@cakeisalie]

the infomercial-esque ad was refreshing! would by 100%

[@DUB__DUB]

You make impossible things possible ❤

[@xaver0.782]

This welding made me cry

[@JohnRoberts321]

I had the same reaction - was shocked more people didn't see it. Some of the worst I've seen.

[@JacobAHull-nx6rx]

Mee too

[@pev05]

Got the job done f it

[@vtowndegekste]

Even if i really try to f#@k it up it looks better then this haha. His skating skills looks horrible also😅

[@dguy-xk4fc]

Those are looking great

[@user-rg8mc4el8w]

Love the idea and creativity but there is so much wrong with these slates it hurts

[@brookewestonctc]

That's this channel's thing - they make insane concepts that are utterly impractical, but look kind of cool for 30 seconds at the end of the video.

[@thisyoutubechannel6896]

@user-rg8mc4el8w you are missing the point of those videos, the videos are not meant to be practical solutions, but just for fun or for experimenting purposes. just because he adds the lightbulb effect in the video, does not mean that he wanted to make a practical solution to it. instead, the probably just wanted to make the thing from their idea that seems cool in their head just to see what it is like when built. even on one of those videos he made, he said that they made a bike modification just for fun. so many people watching these videos fail to know this and would probably be surprised if someone told them these videos are just for fun or experimenting purposes

[@user-rg8mc4el8w]

@@brookewestonctc yeah thats fair

[@chevalsauer]

A lot of work and skills just fun and not a practical solution attempt baffles me

[@liamr6672]

​@@chevalsauerhe's got 13.5 million subscribers, why are you baffled?

[@Jndjnd380]

Amazing bro,I like your handmade new version of rollskatters design.👍👍👍

[@freedownloadfootage4829]

Best editing, smoth transition

[@hazyhaul5720]

This man has the creativity to create happiness and I jealous 😮

[@PureRushXevus]

2:35 and 8:30 damn, the man grew a full beard by the time he finished. Shows how long it took, that's dedication ;)

[@damyomotorized7338]

What if they are different people 😂

[@PureRushXevus]

@@damyomotorized7338 probably :d

[@lucky_loot]

He also have a mustache, honestly if that his face he look like my neighbor

[@Robbiedagobbie]

When you brake does it not flat-spot the tyres really quickly? Awesome build BTW.

[@bryceb3194]

Awesome job with the filming & editing & audio! And a cool final product! Excited for more! Keep it up! 😃

[@dabcat939]

But where's the music?

[@MacStrange]

As always, a work of great craftsmanship and clean design. Well done

[@mastermaster1101]

Xtrail rollers .... 😃 👍👍👍 Superb invention . Like always .

[@anthonyreyes288]

I like the video. A lot of hard work went into this. Thanks for making it. The skates look like fun.

[@zoram671]

OMG.... Absolutely amazing. I've been waiting for the day new rollerblades are invented with a bigger bearings . I used to tell the manufacturer about it.

[@AsPhAlTjUnKiEde]

@zoram671 Bigger bearings for what? More weight, less agility, worse acceleration? the skates built here look cool, but are hardly practical. Much too heavy, bad wheels make it slow, or have high rolling resistance and the boot is absolute junk for this purpose. He should have taken a more stable/quality boot.

[@user-sj1lp8ft8w]

@@AsPhAlTjUnKiEde 100% agreed, these skates are just invented for clickbait, may look interesting but have NOTHING to do with improving anything inline skating 😀

[@robthompson1399]

Great work, very interesting concept. I would like to see another build where the wheels are out in front and behind the foot. Allowing for a longer wheelbase for stability and also allowing the COG to be considerably lower 👍

[@Flyzguy]

Gotta be the greatest ratio of frame strength to wheel strength ever.

[@user-bv9ps3qr2l]

I was watching this video and suddenly an idea came up: what if combine tracks and rollers? Thanks for an awesome video!)

[@patinadormota7604]

Excelente amigo, meus parabéns.

[@beamngnewyork]

Wow

[@MuhammadMundir]

clean work, very well

[@nonyabissniss7526]

Just an idea: make a second pair, extend the length so that the wheels are in front and behind the feet and use them like skis on the road…

[@whateverbikes]

These already exist. Cross country skiers use them to train in the summer. We exercised on them 30 years ago, really nothing new there.

[@jonathanporter5223]

@@whateverbikes I remember my cousin had a pair that he let me try back in early 2000's. They were weird at first, but easily got the hang of it by the end of the day. Hhmmm...I wonder if he still has them or not...

[@johnfranklin6316]

DOPE video! Totally get how hub less wheels work.

[@jonathanporter5223]

Well, technically they actually aren't "hubless" wheels. More like, cleverly built to appear as if they are hubless wheels.

[@johnfranklin6316]

@@jonathanporter5223 Interesting so I still have no idea how hubless wheels work?

[@flermurmurjumjum765]

Very Cool. Functional!

[@mytehnicsolution1365]

Without brakes very cool 👍

[@TronicMade_original]

Nice work.👊

[@boomfiziks]

Very cool! They also seem to be a bit tall and I’d be worried of the torque on your legs. Here’s an idea, could you lower the height by pivoting the wheels outward (laterally) about 45 degrees-30 degrees from vertical?

[@cybersecurity4589]

Even same i was thinking

[@user-xp6un7tv6e]

Yes but then only the corners of the wheels will be touching and also that would probably mean less traction, and what the guy wants is traction

[@imaginarysheeps]

the landroller skates took this approach, they worked pretty well

[@boomfiziks]

@@imaginarysheeps That’s what I was thinking of. Thank you for reminding me of those. I remember Cesar Milan (sp?) the dog whisperer had those things when he’d exercise his dogs.

[@emrekermen5334]

​@@boomfiziksthat would put stress on the joint. Wheels would stop turning after a hour or two probably. Or you would need a very complex system now that I think of it. You could pull this of with side ways rollers maybe. Like the ones in expensive pocket knives. Idk.

[@kolobus101]

these remind me of the old RollerBall skates I used to have

[@a_i_k_0_n]

And what about grease? Do you remove it completely? Is it okay for humidity conditions? Is it comfortable to use ball bearing without any suspension (instead of tires)? Thanks.

[@Th3-Unkn0wn]

Grease is needed for it to spin it nicely, good for humid conditions, it's literally what roller skates and blades use;ball bearings and the sizes are just around 120mm diameter

[@TecraTube]

let me grab my handy 40mm bearings right quick. okay, let's gooooooo. side note, more of an observation - that bird walking was faster than you. those blades are still dope

[@riyan_prof]

Have an inspiration after falling down 😂 nice 👍

[@EveryoneLaugh]

Now I can finally fall with confidence knowing that my ankles will be completely destroyed. Thanks!

[@boreddude8531]

how are you going to change the treads once they wear out?

[@charcoalPanda]

He will build another pair. With square wheels, I guess.

[@geemy9675]

it's not the best design for serviceability like lubing the bearings or changing the tires, but it's not welded, just hammered and screwed so it's still possible.

[@geemy9675]

usually the builds are not done with the best usability in mind, but this one seems usable, except for the very high foot position. I guess for all terrain inline roller skates it would work much better to have the wheels in front and behind the foot, and foot as low as possible, just high enough for ground clearance.

[@gabrielchantraine9736]

Excellent concept 👍🏾

[@my_dear_friend_]

If there was a great designer for every time another one uses hubless wheels in their design, we would live in a world full of great designers.

[@krizzbrwon5810]

Interesante muy ingenioso, quedaron como nuevos, es espectacular

[@drescherjm]

Wow! Those are some large wheels for rollerblades. I skate 100 miles / 161km per month every month for the last 4+ years however I do it on 4x90s or 3x110s.

[@buccob]

Well they seem to be similar to my Powerslide Next Edge... 2x 150mm

[@AsPhAlTjUnKiEde]

@@buccob and Powerslide SUV are much lighter and have a proper stable boot. You can see how he almost bends over several times.

[@dominictaylor6759]

That's a dope build great work! 👍

[@tinyl9599]

Love these

[@jordanaponte3608]

Wow. The roller skates are so cool.😃😃😄😄

[@nirodha7028]

The Q and skates?! Instantly clicked like!

[@bhupindertube]

amazing 🙌

[@ask230]

I've never seen a rollerblading accident quite like that before! The wheels came off so easily 😂

[@mr.cantillasz1912]

He bought it feom wish😂

[@anandsharma7430]

I especially liked how he effortlessly sliced rings off a metal pipe with a knife. Best metal cutting tools 😂

[@josecarlosvianadasilva6585]

Parabéns pela ideia!! Nitidamente o centro de gravidade foi alterado o que causou uma maior instabilidade para os lados. A bota tem que ser reforçada, pense nisso.

[@contraibantrasua]

Thank you 👏👏

[@thisyoutubechannel6896]

so many people are hating on these videos because the thing they made is impractial, but don't realize that these videos are just for fun and just for experimentation. the things they make are not meant to be practical, but to see what their concept idea when built is like. I really wish more people reailzed, because the other videos get so many dislikes

[@SpiffyNiffty]

I think these are very cool.

[@kaiwheeler64]

The old Black and Decker power file would come in handy there. 🧤

[@SgtStinger]

Awesome project, and what a cool way to break your ankles XD

[@Th3-Unkn0wn]

Just make the width of the wheels larger, inline skates range from 50mm to 120mm size

[@Axxidous]

@@Th3-Unkn0wn I mean yeah there are suggestions to remedy that, but that's the thing. You gotta apply those suggestions cuz as it is.... lol

[@smallville6683]

Nice work

[@animeshmaji12376]

The Q IQ is beyond the IQ of our famous scientists.

[@atacstringer8573]

I feel like we should be in matcha Dunkin with some skate company they look like a professionally-made product awesome job

[@greeksalad4783]

This guy has to be an engineer!

[@goidogoi]

Wonder if newer 3D printers would work, for that frame though. Giving a strong but lighter frame for the wheels.

[@TheGeneralkrank]

bro those welds 😞😞😞. you seem to professional for those welds to not be a parody

[@razrogersetbon740]

Super talented

[@raaintelfer7866]

Mad skills

[@bigmak3995]

Nice shot

[@eig1979]

I would redesign them longer, so that you could bring the shoe part closer to the ground.

[@bananejon5393]

* Air Gear opening playing in the background * Noice !!

[@CharliesStudio_]

Nice job :)

[@user-rm4ho1kq1d]

SALUDOS DESDE LA ARGENTINA. PATENTALOS ES TU IDEA Y TU BUEN TRABAJO. QUEDARON DE 10. 🥇🏆🏁

[@user9b2]

Version II - lengthen the wheelbase and lower the boot by placing the wheels at eleven o’clock and 2 o’clock respectively. This could allow to you to add suspension in the form of springs as the wheel can now flex to the three o’clock and nine o’clock positions. 👏👍

[@tom4od]

Cool video. Off-road skates are a thing already btw. Going hubless is a good quirk though

[@Bert3HD]

Could of improved the look of the weld man. Not hard the grind it down smooth. Each to there own I guess😏

[@derpapito1391]

If welded right, there's no need to grind. That's some shitty welding

[@jonathansantos2271]

Good increase in style. I wonder how it does on smooth pavement?

[@okayolamax2min345]

Flawless floorlessness

[@ideaynojodas]

Pretty cool

[@JayHeartwing]

The problem with inflatable tires, they're super slow on flat roads. Tho it's a really cool build. It looks futuristic.

[@nephmusic6824]

bye bye ankle.

[@4144758]

Super cool

[@takeshimomoshiro5325]

Without Brakes???!!! 😲 COOL!!! 😎👌 You're Hardcore!!! 😂😂😂

[@SirZapsALot]

The Q: Makes something unique for entertainment everyone: OMG ThAtS So ImPrAcTiCaL.

[@froztygaming4857]

Cool build, welds a bit rough.. tig is cleaner... Hows the weight on them? Seems like anyone would get tired pretty fast with all that metal.

[@incautious1]

Nice! Love what you do with basic tools. You gotta learn to weld tho, lol

[@Alacod19]

My ankles hurt just watching this.

[@sdoksdomdiy99]

Hello your project so amazing

[@NotSoSuave]

I hope you patented this design…looks very nice

[@herberar]

Nice leg exercise with your new 12 kg roller skates!

[@dgoddard]

No pigeons were harmed in the making of this video.

[@sambelgoang9759]

Amazing

[@StilgorStilgor]

I am from Bangladesh 🇧🇩🇧🇩my favourite channel ❤

[@Aytal2973]

And?

[@reedheit4208]

Your arm must've hurt so much for that shot at the beginning 😂

[@mb19999]

So nice but looks heavier, hard plastic is better, love it ❤

[@vinodpatni7208]

amazing

[@yshany7867]

Great video

[@rodrigodesouzadiasguimarae3001]

Really would like to see it with a shock absorber!

[@AsPhAlTjUnKiEde]

Take Powerslide SUV skates with pneumatic tires, then you have your shock absorber. And they are much lighter.

[@lionking8819]

5:44 so satisfying

[@baskose9159]

Çok güzel bir prohe daha ancak direkmaltına vidalamak yerine alçak yapmak yerine ayakkabının yan tarafına gelecek şekilde olsa daha iyi olırdu sanki yoksa bu şekilde kontrolü zor olur